Ground Operations: Preflight Planning for X-Plane flight simulator. Taxiing.

1. Ground Operations: Taxiing Step 1: Close Checklister Plugin

2. Ground Operations: Taxiing Step 2: Open Airport Navigator Plugin SELECT: View the map.

3. Ground Operations: Taxiing Step 2: Open Airport Navigator Plugin ZOOM IN: Press [crtl][shift][page up] on keyboard. ZOOM OUT: Press [crtl][shift][page down] on keyboard.

4. Ground Operations: Taxiing Step 3: Test Brakes TEST: Release parking brake, increase throttle to 1200 RPM and test brakes. Adjust throttle to obtain normal taxi speed. Maximum taxi speed is 20 knots.

5. Ground Operations: Taxiing Step 4: Exit General Aviation Ramp LEFT: Turn left and center the airplane over the yellow taxiway centerline. Airport Navigator's red triangle shows your aircraft position and orientation.

6. Ground Operations: Taxiing Step 5: Taxiway November LEFT: Turn left onto taxiway November

7. Ground Operations: Taxiing Step 6: Taxiway Papa LEFT: Turn left onto taxiway Papa.

8. Ground Operations: Taxiing Step 7: Taxiway Delta RIGHT: Turn right onto taxiway Delta.

9. Ground Operations: Taxiing Step 8: Taxiway Alfa RIGHT: Turn right onto taxiway Alfa.

10. Ground Operations: Taxiing Step 9: Taxiway Bravo RIGHT: Turn right onto taxiway Bravo.

11. Ground Operations: Taxiing Step 10: Locate Run-Up area. PREPARE: Locate a suitable area to perform your Before Takeoff checklist. Typically there is an area short of the runway entrance clear of traffic.

12. Ground Operations: Taxiing Step 11: Stop STOP: Stop in the area to perform your Before Takeoff checklist. Set throttle to idle.