The TME Group provides specialist services to the mining and oil & gas industries, including engineering design, fabrication, construction, mill installation, project management, and recruitment. They have extensive experience since 1952 and facilities across Australia and South Africa. They take a comprehensive approach to projects from initial planning through commissioning while maintaining a high level of safety, quality, and client satisfaction.

4. Fabrication

6. Construction

8. Mill Installation and Relines

10. Fabrication of Reline Liner Handler Machines

12. Project Management and Engineering Support

14. Administration, Payroll and Recruitment

16. Collaborative Contracting The TME Group has been in operation from 1952 with extensive experience gained in providing Structural, Mechanical and Piping (SMP) services, as well as Mill Installation and Reline Services. The TME Group have workshop and office facilities in Geraldton, Perth, Kalgoorlie, Cairns, Hobart and South Africa, with the capacity to mobilise to site on relatively short notice. The TME Group utilises a dedicated internal recruitment service, where the prime responsibility is to ensure that all required personnel are sourced, pre-qualified and are job ready to commence work when required to do so. The low turnover rates we experience is a testament to the level of service provided to both the Client and our field personnel. The capacity of TME is underpinned by the fact that there are in excess of 450 personnel currently employed, with the capability to extend well beyond this figure. TME have undertaken national and international contracts, where there has been a requirement to provide experienced personnel and equipment, and have the strength and stability required to undertake projects in the current market environment. The work we undertake encompasses all aspects of the project, from initial contract start-up through to commissioning and post commissioning support.

17. Engineering The TME Group can provide “Whole of Project” services, that include Feasibility and Design of projects, including Engineering, Procurement and Contract Management (EPCM), as well Engineering, Procurement and Construction (EPC), so as to ensure that the client’s requirements and quality management is maintained at a high level throughout the project. The TME Group, in conjunction with our Alliance Partners, can provide range of engineering services, and has the ability to work with the client as part of an integrated working alliance. Skills that can be provided to the client include: Engineering Design Design Drafting and Drafting Management Procurement Contract Management Project Management Sub-Contractor Management and Collaboration Fabrication The TME Group have fabrication workshops in Geraldton, Cairns, and alliances in Perth and Thailand, and have the ability to provide cost effective and quality output, whilst maintaining a strong presence in Australian based engineering and project management, thus providing the client with a high level of representation. The TME Group’s distinction lies in the areas of: fabrication of platework, piping and structural steel equipment management, supply of skilled personnel exotic welding capability project management specialised equipment manufacture

19. structural steel erection

20. conveyor galleries installation and commissioning

21. pipe installation

22. crusher installation

24. refurbishment of plant and structures

25. reconfiguration of plant to suit new application

26. modifications to meet new process requirements

28. installation or modification to operating plant

29. assistance with teams or individuals for emergencies or planned shutdowns

31. Monitoring

33. Qualified liner handler operators

34. Highly experienced trained supervisors

35. International reputation for excellence

36. Specialised equipment

39. Industrial relations management.

40. Trade labour resources, supply, administration and logistics management.

41. HSEC competency and compliance.

42. Quality Management and related services.

44. Procurement

45. Construction Planning and Scheduling

48. Rigging

49. Elevated Work Platform

50. Confined Space Awareness (CS1)

51. Enter Confined Space (CS2)

52. Safety for Supervisors (S1, S2, S3)

53. Certificate II in Metalliferous Mining Operations (Open Cut & processing)

54. Certificate III in Metalliferous Mining Operations (Processing) Safety is at the centre of our value system and operational philosophy and with its secure status as a Registered Training Organisation (RTO) TME is a proactive educator and safe work practitioner.

55. Indigenous and Community Employment The TME Group is very proactive in our approach to Indigenous Employment, and plays an active part in the training and development of the local Midwest Indigenous Family Groups. The TME Group is a Registered Training Organisation, and is proud of our reputation in assisting indigenous candidates obtain extra skills and qualifications, which enable our participants to become “Job Ready”. The TME Group is a member of the Bayalgu Training Program, which in conjunction with the MMG Golden Grove Mining Operations, provides on the job training and skills to further their career development: Golden Grove General Manager Mr Nick Mosenthal believes the program is an important development tool for local Indigenous youth. “The Bayalgu program plays a valuable role in providing Indigenous Australians with a range of entry-level work readiness skills and competencies to enter the resources, civil construction and associated service industries,” he said. The program takes a holistic approach and includes safety awareness training, small machine operation, a live work road construction project, an industry work placement, and job preparation activities including resume, cover letter and interview training,” said Mr Mosenthal. In addition, the TME Group believe that Community involvement, as participants of our workforce, produce a net positive effect on the way we perform our range of services. Where our projects are of an international nature, the TME Group will actively seek local involvement where practicable.

57. Perth, Western Australia – Four (4) Personnel

58. Hobart, Tasmania – Three (3) Personnel

59. Cairns, Queensland – One (1) Personnel In addition, the TME Perth Office has in residence a Chinese Liaison Manager, who speaks and writes in fluent Mandarin, following nine (9) years of extensive study in China and Taiwan. The TME Group resources personnel from an extensive Australian and International database of industry focused personnel, who are managed on site by qualified and experienced supervisors, as part of our project management team.

61. Project Engineers

62. Project Management

63. Procurement Personnel

64. Planning and Scheduling

65. Project Controls

66. HSE Specialists

68. Provision of Goods and Services;

69. Fabrication and Material Supply;

70. Equipment Management; and

71. Subcontractor and Prequalification Management. Construction Planning and Scheduling At the tender / contract development stage, TME will review the Client supplied Schedule, to ensure that our constructability schedule will align with the schedule agreed to with the Client. Where there is a change in milestone dates, TME will immediately discuss with the Client any material effect this may have on the Project, and if so, what the requirements are to ensure adherence to the timeframe as outlined in the original schedule. The TME Capital Works Supervisor, in conjunction with the Team Supervisors, shall compile daily work records, which shall be aligned with the schedule, and presented at Client Progress Meetings.

72. Our Delivery Approach (continued) Quality Assurance As part of the construction process, TME shall develop a Project Quality Management Plan, which will operate in conjunction with the Project Execution Plan. Both plans shall be submitted to the Client or approval prior to implementation, and all relevant personnel shall receive a comprehensive briefing as to the content and operation of the plans. TME has achieved and operates in accordance with ISO 9001:2008, and ensures strict compliance with the relevant Australian or International standard or code for work procedures. All document control is managed in accordance with the above standards, and is kept both on-site and in a central, off-site location for back-up and security purposes. Any variations to the original Scope of Works or Contract shall be approved prior to commencement of the task, with copies of all approvals being submitted as part of the invoicing procedure. Cost Engineering TME has the capacity to secure the best value from a project by considering the whole range of cost and risk inputs. We bring an inherent understanding, gained through experience, of the costs of particular projects, from our experience in project delivery. TME utilise Project and Cost Engineering personnel to ensure that all project costs are captured. TME provides full transparency for reimbursable contracts, during which our Cost Engineer will monitor all captured costs, and manage this on behalf of the client. Document Control TME maintains our Document Control section to the highest standard, with our Document Control Manager ensuring that full levels of traceability are available, in accordance with both our quality procedures and the client’s specific requirements. TME’s document control system ensures that each project is maintained with the appropriate levels of authority so as to enable full client confidence that both security and uniformity have been maintained. TME uses a modern document control management system, allowing the TME Project Document Control Specialist to remain the Gatekeeper of project documentation, so that the flow of information is controlled, recorded and has fast delivery.

74. Demolition Management of the Existing Re-Slurry Tank

75. Installation of the New Re-Slurry tank

76. Demolition Management of the Refractory Brick and Rubber Lining of the Reactor No. 2 Tank

77. Fabrication and Lining of the Reactor No. 2 Tank with Alloy 31 Plate The engineering of this new type of lining was a major step by Incitec Pivot to improve the life cycle value of the Phosphate Hill Reactor Tank, and the amount of fabrication and welding of Alloy 31 for such a use was a World First Project.

79. Erection of Conveyors CVN01, CV20, CVN04 & CVN05

80. Erection of Double Deck Screening Station

81. Erection of Sample Tower & Sample Lump Crusher Steelwork

83. Jaw Crushers

84. Conveyors

85. Rockbreaker

87. Plant water distribution pipe work and associated valves The TME Group were able to ensure that the project was consistently maintained both ahead of time and budget.

89. Structural Steel Repairs

90. Pipework Removal and replacement

91. Mogenson Screen Removal and replacement

92. Hopper repairs and replacement