ECWAY TECHNOLOGIES IEEE PROJECTS,HARDWARE & SOFTWARE DEVELOPMENTS OUR OFFICES @ CHENNAI / TRICHY / KARUR / ERODE / MADURAI / SALEM / COIMBATORE BANGALORE / HYDRABAD CELL: +91 98949 17187, +91 875487 1111 / 2111 / 3111 / 4111 / 5111 / 6111 / 8111 Mail to: ecwaytechnologies@gmail.com | ecwayembedded@gmail.com VISIT: www.ecwaytechnologies.com | www.ecwayprojects.com

1. ECWAY TECHNOLOGIES
IEEE PROJECTS & SOFTWARE DEVELOPMENTS
OUR OFFICES @ CHENNAI / TRICHY / KARUR / ERODE / MADURAI / SALEM / COIMBATORE
BANGALORE / HYDRABAD
CELL: +91 98949 17187, +91 875487 1111 / 2111 / 3111 / 4111 / 5111 / 6111 / 8111
VISIT: www.ecwaytechnologies.com | www.ecwayprojects.com
Mail to: ecwaytechnologies@gmail.com | ecwayembedded@gmail.com
DESIGN AND FABRICATION OF PORTABLE PORT TYPE
INTRAGRATED HYDRAULIC BEARING PRESS
(CAPACITY 7TON)
ABSTRACT
Portable Port type hydraulic power press is used to remove bearing
from shaft in machine assembly area or use to insert any kind of bush in
force fit manner. So there is no need t go machine shop to remove bearing
from the assembly point. And it is portable one; we can take this any where
the machine assembling point may be
WORKING
This machine has a hydraulic cylinder and piston assembly. Which
works in a port type integrated hydraulic circuit. I this circuit there is no
need for separate oil pump hydraulic houses, D.C valves, Pumps etc. These
all those things are integrated with the hydraulic cylinder itself

2. DESIGN AND FABRICATION OF PORT
TYPE INTEGRATED HYDRAULIC POWER
PRESS
CROSS RAILS
CYLINDER
PISTON
PLACE FOR HOLDING VICE
DETAIL SKETCH OF HYDRAULIC
CYLINDER
RELIF VALVE
PUMP
OIL INLET
OIL OUTLET
Key words-Design, Fabrication, working inspection, Report creating
PRINCIPLE OF WORKING
Pascal's law is the basis of hydraulic drive systems. As the pressure in
the system is the same, the force that the fluid gives to the surroundings is
therefore equal to pressure x area. In such a way, a small piston feels a
small force and a large piston feels a large force.
WORKING PRINCIPAL DRAWING

3. CONSTRUCTION WORKING OF HYDRAULIC CIRCUIT

4. Hydraulic cylinders (also called linear hydraulic motors) are mechanical
actuators that are used to give a linear force through a linear stroke. A.
Hydraulic cylinders are able to give pushing and pulling forces of millions of
metric tons, with only a simple hydraulic system. Very simple hydraulic
cylinders are used in presses; here the cylinder consists out of a volume in a
piece of iron with a plunger pushed in it and sealed with a cover. By
pumping hydraulic fluid in the volume, the plunger is pushed out with a
force of plunger-area * pressure. Here hydraulic circuit is a port type
integrated one. No hoses are found .oil will passes through port only and no
separate sump for oil storage .oil store around the shell of hydraulic cylinder
itself
CALCULATION OF HYDRAULIC CIRCUIT
The pushing or pulling force of a hydraulic cylinder is:
F = Ab * pb - Ah * ph
F = Pushing Force in N
Ab = (π/4) * (Bottom-diameter)^2 [in m2]
Ah = (π/4) * ((Bottom-diameter)^2-(Piston-rod-diameter)^2)) [in m2]
pb = pressure at bottom side in [N/m2]
ph = pressure at cylinder head side in [N/m2
Advantage
 It is portable one
 No hoses and electric equipment
 Less space only required for mounting