1. DONY MON LEPHONSE (Electrical Engineer)
Email: donymondony@gmail.com
Email: donymon.7@gmail.com
Mobile: +97152-959 5632
Mobile: +97156-585 1510
CARRIER OBJECTIVES
To work in a challenging environment demanding all my skills and efforts to explore and adapt myself in different
fields and realize my potential and contribute to the development of organization with impressive performance
EDUCATIONAL QUALIFICATION
B.E (Bachelor of Engineer), in Electrical & Electronics Engineering from James College Of Engineering&
Technology, KANIYA KUMARI , Tamil Nadu, India, Sept 2009 ~ March 2013.
PROFESSINAL EXPERIENCE
Now am working as Electrical Technician at EMRILL SERVICES L.L.C in DUBAI (Nov 2014 to still
now)
I was working as a Technician at TENDAM ALLIED SERVICES in BANGLORE, INDIA (Feb 2014 to
Aug 2014).
I was working as a Technician at JOHNSON Lifts& Escalator PVT Ltd in BANGLORE INDIA (June
2013 to Dec 2013).
ROLES AND RESPONSIBLITIES
JOBS AND DUTIES
 Assemble, install, test and maintain Electric (or) Electronic wiring, equipment, appliances
apparatus and fixture using hand tools and power tools.
 Diagnose in all functioning systemsapparatusand components using test equipment and hand tools
to locate the cause of a break down and correct the problems.
 Connect wires to circuit breaker and transformer (or) others components.
 Inspect electrical systems, Equipment and components to identify hazards defect and the need for
adjustment (or) repair and to ensure compliance with codes.
 Advice management on whether continued operation of equipment could hazardous.
 Test electrical system and continuity of circuit in electrical wiring, equipment and fixtures using
testing devices such as ohm meter and volt meter to ensure compatibility and safety of system.
 Install ground lead and power cables to equipment such as motor.

2.  Checks and takes stock level of all electrical and electronic spare parts, to have sufficient and
adequate stock levels.
 Prepare and safety technical drawings, specified of electrical systems and topographical maps to
ensure that installation and operations conform to standard and customer requirements.
 Inspect completed installations and observe operations to ensure conformance to design and
equipment specifications and complete with operational safety standards.
 Design implement, maintain, and improve electrical instrument, equipment, facilities, components,
product, and system for commercial, industrial, and domestic purpose.
 Operate computer-assistedengineering and design software and equipment to perform engineering
task.
 Direct and co-ordinate manufacturing, construction, installation, maintenance, support,
documentation, and testing activities to ensure compliance with specification codes, and customer
requirements.
ACTIVITES
 Making decisions and solving problems to analyzing information and evaluating results to
choose the best solution and solve problems.
 Communicating with supervisors to providing information to supervisors , co – workers
 Keeping up to date technically and apply new knowledge to my jobs.
 Getting information observing, receiving, and otherwise obtaining information form relevant
sources.
 Inspecting equipment, structures, (or) materials to identify the cause of error (or) other
problems (or) defect.
 Repairing and maintaining electronic equipment is servicing, repairing, calibrating, regulating,
fine tuning (or) testing machine, devices, and equipment that operate primarily on the basic of
Electrical (or) Electronics (Mechanical) principle.
 Training and teaching others to identifying the educational needs of other developing formal
educational (or) training programs (or) instructing others.
 Continuously reviews requirement of spares for various activities against availability and
makes requisitions for changes or new stocks for equipment and machinery in the plant.
 Thinking creativity to developing, designing, or creating new application, ideas, relationships,
system or product, including artistic contributions.
 Communicating with people outside the organization, representing organization to customers,
the people, government and other external sources this information can be exchanged in
perform in writing, or by telephone, or E-mail.
SKILLS
 Installing equipment, machine wring, to meet specifications.
 Repairing machines (or) systems using needed tools.
 Time management is managing one’s own time and the time of others.
 Judgment and decision making is considering the relative costs and benefits of
potential action to choose the most appropriate one.
 Co-ordination to adjusting action in relation to others actions.
 Leads and supervises the electrical section in maintenance related jobs , provides
assistance in trouble shooting, issues reports on major failures and recommends
suitable actions to minimize or eliminate recurrence of the problems, formulates
preventive maintenance schedules and associated procedures and checklists,
formulates training program for electrical technicians.
ABILITIES
 The ability to tell when something is wrong (or) likely to go wrong it does
not involve solving the problems only recognizing there is a problems.

3.  Deductive reasoning to apply general rules to specific problems to produce
answers that make sense.
 Oral expression to communicate information and ideas in speaking so others
will understand.
 Oral comprehension to listen to understand information and ideas presented
through spoken words and sentences.
 Speech recognition to identify and understand the speech of another person
 Over all 24 hours per day, every day, responsibility.
 Influence ideas is come up with a number of ideas about topic (the number of
ideas important, not their quality, correctness, or creativity).
KNOWLEDGE
 Mechanicalknowledge of machines and tools including their design, uses,
repair, managing.
 Monitors electrical maintenance jobs during shutdowns/break downs to
ensure quality and accuracychecksthe calibration of protective relays and
other regular tests performed on electrical equipment during shutdown
 Provides work direction to electrical technicians.
 To practical applications of engineering science and technology. This
includes applying principles, techniques, procedures, and equipment to
the design and production of various goods and services.
 Computer and electronics of circuit boards, processors, chips, electronic
equipment, and programming.
 Design techniques, tools, and principle involved in production of
precision technical plan, blueprints drawing, and models.
 I know about all functions of FSI.
 It’s based on concept of evolution completely web based computer aided
facilities management (CAFM) software solution from FSI.
 Facilities management accessible anywhere via a single web browser n
extremely powerful, flexible and easy to use facilities management.
 Single, integrated view of facilities management and maintenance
management activities.
 Integration with common business application for complete control of
facilities management and maintenance management functions.
 FSI access hardware and software systems; this provide a full automation
of business processes.
 We provide automated email production when accessfordefined business
to keep customer, manager, supervisor, and their staff up to date with FM
activities.
 CAFM software function analysis contact management, document
management, planned every dairy, customer satisfaction audit, finance,
resource and skills register shift and supplier register, system and user,
automated performance.
TECHNICAL SKILLS
 Electrical AutoCAD
 Power Electronics
COMPUTER PROFICIENCY
 Operating systems : Windows 98, Windows 2000, Windows XP,windows8.1
 Management and Designing Package: MS Office,Electrical Cad.
CERTIFICATION COURSE

4.  Bachelor Degree of Electrical & Electronics Engineering.
 Diploma in Electrical AutoCAD.
PERSONAL DATA
FATHER’S NAME : LEPHONSE. G
D.O.B : 21/07/1992
GENDER : Male
MARITAL STATUS : Single
PASSPORT NO : M O 143448
PASSPORT VALITITY : 13/07/2024
NATIONALITY : Indian
ABOUT MY SELF
A highly motivated person currently seeking challenging assignments where in the skills so far acquired shall be
best utilized. Skilled to resolve technical issues and have good communication skills and capability of developing
good inter-personal relationships I shall endeavor to extend my skills to your entire satisfaction
DECLARATION
I hereby declare that the information furnished above is true to the best of my knowledge and belief and if given
an opportunity, I shall endeavor to extend my skills to your entire satisfaction.
YOUR’S TRULY,
DONYMON.L