Has your deck seen too many summers? Is it worn out, depreciated and damaged? If yes, then it’s time to rescue your deck board from all the damage and give it a brand new look. More info visit website http://www.deckdaddy.com/
Beginners Guide to TikTok for Search - Rachel Pearson - We are Tilt __ Bright...
How to Rescue a Damaged Deck Board – DIY Deck Repair Solution
1. How to Rescue a Damaged Deck Board –
DIY Deck Repair Solution
Has your deck seen too many summers? Is it worn out, depreciated and damaged? If
yes, then it’s time to rescue your deck board from all the damage and give it a brand
new look. DIY deck repair may be a little tedious, but using the right tools and
techniques can help you rescue your deck and make it brand new without sucking
the green bills out of your pocket
2. Here are the things you’ll need:
Protective eye glasses
Tape Measure
Drill machine
Saber saw
Circular saw
Deck screws
Framing square
3. Step 1: Remove the Damaged Portion
To make sure the repair is as neat and natural as possible, remove the
damaged portion of the board first. Put on your protective eye glasses
(these are important to keep hazardous material away from your eyes).
Use the jigsaw to cut the damaged bit; use the framing square to assist
with the direction of the jigsaw. Remove the worn out deck portion
between the two joists.
4. Step 2: Install Support Boards
Use a saw (check for tutorials if you haven’t used it before), cut out long
sections of support blocks (check the size that matches your deck
board). Take one support block and put it in the centre, under the
opening next to a joist and pull with force to the base of the deck floor.
Nail the support board to the joists with the deck screws. Repeat the
step for the other opening.
5. Step 3: Install Fresh Planks
Once you’ve installed the support boards firmly, install fresh
planks. Cut the fresh deck board to length. At each end,
ensure you make a square cut. Carefully check the end grain
pattern of the board; make sure the bark side is down. Drill
holes into the support board through the fresh plank. Fasten
both the boards together with deck screws. In case your deck
board is composite or plastic and not cedar or red wood, you
will need to apply a preservative to the boards. This, you will
need to do before you install the fresh planks.
6. Follow the above given steps to remove the worn out section of your
deck without much difficulty. Safety of deck is very important,
especially when you have kids or pets in your home. Lack of
maintenance and repair can lead to a hazardous situation for anyone
who may walk on the deck and get a splinter. To ensure that the deck is
safe to use for everyone, repair it without delay. Deck resurfacing is also
a great option; it’s efficient and cost effective. In case you can’t repair
your deck yourself, then it’s wise to hire deck builders who can do the
job right in the first go. Read more about Deck Repair Solution visit
website http://www.deckdaddy.com/