Oil Technics: New C6 Fire Fighting Foams Brochure.
Oil Technics Ltd: Introducing: OT8. Keeping it clean in 2014!
1. OT8
Biological Oil Stain Remover for Hard Surfaces
Range
MSDS
VOC Content
Risk Phrases
Testimonials
Buy Online
A new approach to the removal of oil stains on hard surfaces and porous
block work.
A biological oil stain remover that rapidly removes and digests oil stains
from surfaces such as block work, paving stones, concrete, forecourts,
garage floors, driveways and equipment.
KEY PROPERTIES
Penetrates and lifts oil stains from most porous surfaces.
Contains a blend of biological enzymes and bacteria to digest oil stains to
completion.
2. Biologic
al
Biodegradab
le
APPROVALS
German UBA (3406-0001)
Separator Friendly
UK Environmental Agency report
on the bacteria used in this
product
− Environmentally acceptable chemical.
− Meets pr EN 858
− Full report.
− Summary report.
APPLICATION
OT8 is simple to use and lifts oil stains from most porous surfaces.
Shake container before use (to put bacteria into suspension).
Water wet the oil stain before applying OT8.
Brush into the stain until OT8 changes colour from white to brown.
Leave for 20 minutes and water rinse.
Approximately 1 litre of OT8 treats 1 square metre.
If using OT8 KIT
After rinsing, apply Spill Gel to absorb free oil and prevent spills reaching
surface drains.
Sweep up and dispose of according to local regulations. Rinse clean.
3. Note
OT8 is a biological solution that uses harmless bacteria to remove oil stains
from porous surfaces.
For best results or for when using on larger stains, cover the treated area with
polythene sheeting − ideally making a tent − and keep in place for up to a
week. Ensure the area remains damp, but not flooded. Doing this provides a
warm and damp environment, giving the bacteria used in OT8 the best
conditions to grow and digest the oil into carbon dioxide and water.
On old, weathered and ingrained oil stains, the oil stain may “re-appear”. This
is because the bacteria in OT8 keep working after application to bring the
ingrained oil stain to the surface. Some types of concrete are more easily
treated than others and for optimum stain removal it may be necessary for
OT8 to be applied more than once, over an extended period of time.
OT8 is not suitable for use on Wood oils.
OT8 is not suitable for oil stains on Tarmac − please use Bio TA.
ALTERNATIVE FORMATS
OT4 − A 50% dilution for use by cleaning contractors.
TECHNICAL DATA
Appearance
Opaque white liquid
SG
Bacteria Count
0.96
AVAILABLE PACK SIZES
20Ltr, 4×5Ltr, 1Ltr, 1 metre2 kit, 5 metre2 kit.
2.0 × 107 cfu/ml
4. SAFE HANDLING AND STORAGE
Store in original containers and avoid extremes of temperature.
For guidance on handling and disposal see Material Safety Data Sheet.
Manufactured & supplied by
Oil Technics Ltd.
Linton Business Park,
Gourdon, Aberdeenshire,
Scotland UK DD10 0NH
Tel: +44(0) 1561 361515
Fax: +44(0) 1561 361001