Cycle Therm is an international leader in the design, fabrication, and installation of Regenerative Thermal Oxidizers (RTOs). Would you like your only responsibility to be supplying power and gas to the RTO site? While each RTO system is site-specific, chances are, we have installed a system in an application just like yours. http://www.cycletherm.com/

1. The clean air for sure!
Cycle Therm is an international leader in the design, fabrication, and installation of Regenerative Thermal
Oxidizers (RTOs). Would you like your only responsibility to be supplying power and gas to the RTO site?
While each RTO system is site-specific, chances are, we have installed a system in an application just like
yours.
We have over 30 years experience installing turnkey RTO systems throughout the world. We take complete
responsibility for Mechanical and electrical installation, Process ductwork design, insulation and installation,
Concrete pad, System testing and Start-up. Simplicity generates reliability. Over 30 years of hands-on design
experience has taught us to generate reliability by enforcing simplicity. This is our creed.
By using proven, best of breed components mixing and combining these standard subsections, Cycle Therm
supplies a state of the art, economically viable RTO, reduced to simplicity. Our 30 years and over 200
worldwide installations constantly reaffirms the fact, simplicity generates reliability.
The design of an RTO and system interface is made up of 20% science and 80% art. While its concept is
simple, its design and application are not. All RTOs are very dynamic devices with never ending internal
temperature, pressure and stress changes.
The understanding of these changes and their incorporation into the device's design has a profound impact
not only on effectiveness and reliability of the device, but on the process it is serving. Just like other thermal
oxidizer technologies, the application of an RTO poses different challenges as it is applied to different
manufacturing processes. The understanding of your process is paramount in its application. The salesman

2. that sells his RTO on the basis that his unit is suitable for all applications is surely just looking for a fast sale
letting the consequences fall where they may. Before placing an order, ask to sit down with their technical
people.
RTOs, because of their unique ability to preheat incoming process fumes to within 5% of oxidation
temperature using the unit's exhaust heat, makes them the most economical, reliable and forgiving
technology available to destroy most mixed hydrocarbon laden fumes (VOCs). We've used our expertise to
make this great technology even more efficient and cost effective by using Cell Stone® Ultra; an exclusive,
patented ultra low pressure drop ceramic heat recovery media specifically designed for use in Cycle Therm's
RTOs.
The combination of high heat recovery with low pressure drop results in significantly lower gas and electric
usage, as well as higher VOC destruction efficiency, making it one of the most environmentally responsible
pollution control units available today.
Each piece of equipment we sell is custom engineered to your specifications by RTO specialty engineers with
over forty years of application experience. With hundreds of worldwide installations, chances are, we have
installed a system in an application just like yours.
In today's market, RTOs are increasingly being purchased on the proposal's price page rather than good
design, materials of construction or safety features. Like most things in life, you get what you pay for. We put
our experience to work for you by thoroughly understanding your process, helping to select the right
equipment and optimizing the system's performance to maximize your investment. Too often it is after the
low bid is selected that the hidden requirements pop up, such as start-up costs, external insulation, support
grids, transfer dampers, purge dampers, variable frequency drives, stack height, access platforms, installation,
foundations, etc.
Robust construction materials along with tried and proven off the shelf components assure longevity and
good design principles reduce operating and maintenance costs.
Mailing Address:
John Strey
Cycle Therm, LLC
1422 Indianhead Drive E
Menomonie, WI 54751-8524
Phone: (570) 839-8836
Fax: (570) 839-8837
http://www.cycletherm.com/