12. デバイス情報の確認
12
switch:admin> nsshow
{
Type Pid COS PortName NodeName TTL(sec)
N 0a0000; 3;10:00:8c:7c:ff:07:45:01;20:00:8c:7c:ff:07:45:01; na
FC4s: FCP
PortSymb: [75] "QLogic-1860-2p | 3.2.6.0 | HP-SERVER | Windows Server 2012
Datacenter | N/A"
NodeSymb: [39] "QLogic-1860-2p | 3.2.6.0 | HP-SERVER | "
Fabric Port Name: 20:00:50:eb:1a:f9:3c:74
Permanent Port Name: 10:00:8c:7c:ff:07:45:01
Port Index: 0
Share Area: No
Device Shared in Other AD: No
Redirect: No
Partial: No
LSAN: No
Device link speed: 16G
...
スイッチ (ファブリック)にログインしているデバイスの情報を表示
22. ファームウエアメンテナンス手順
• 対象スイッチ用のファームウエアを入手
‒ 機器によって使用できるファームウエアは異なる
• Release Notes確認
• 必要に応じてconfigupload/supportsaveを実行
• 現在のバージョンを確認
• SCP/FTPサーバ上でファームウエアを解凍
• スイッチ上でfirmwaredownloadコマンドを実行
‒ FTPサーバ名もしくはIPアドレスを入力
‒ FTPサーバにログインするユーザ名/パスワードを
入力
‒ インストールするFabric OSバージョンを入力
• firmwaredownloadstatusコマンドで状況を確認
22
switch:admin> firmwaredownload
Server Name or IP Address: xxx.xxx.xxx.xxx
User Name: user
File Name: v8.0.1a
Network Protocol(1-auto-select, 2-FTP, 3-SCP, 4-SFTP) [1]:
Password:
Server IP: xxx.xxx.xxx.xxx, Protocol IPv4
Checking system settings for firmwaredownload...
System settings check passed.
You can run firmwaredownloadstatus to get the status
of this command.
This command will cause a warm/non-disruptive boot but
will
require that existing telnet, secure telnet or SSH
sessions
be restarted.
Do you want to continue (Y/N) [Y]:
・ファームウエアダウンロード手順
(Fabric OS 8.0.1a)
23. 設定情報の保存
23
switch:admin> configupload
Protocol (scp, ftp, sftp, local) [ftp]: scp
Do you want to continue with CRA (Y/N) [N]:
Server Name or IP Address [host]: xxx.xxx.xxx.xxx
User Name [user]: admin
Path/Filename [<home dir>/config.txt]:
Section (all|chassis|FID# [all]):
admin@172.24.197.30's password:
configUpload complete: All selected config parameters are uploaded
G620_1:FID128:admin>
SCP (SSH)サーバーに設定情報をバックアップ