6. electronics desing (Feb 28) WALTER GONZALES ARNAO

1. UNIVERSIDAD NACIONAL DE INGENIERÍA
FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
Fab
academy
STUDENT: WALTER HECTOR GONZALES ARNAO
CLASS 6: electronics design (Feb 29) 2012

2. UNIVERSIDAD NACIONAL DE INGENIERÍA
FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
Fab
academy
summary:
work is to learn how to modify existing electronic apparatus
2012

3. UNIVERSIDAD NACIONAL DE INGENIERÍA
FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
Fab
academy
Step one:
working on software to modify the circuit eagle
2012

4. UNIVERSIDAD NACIONAL DE INGENIERÍA
FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
Fab
academy
Step two:
enters all parts in the schematic mode for easy
2012
disposal in the drawing

5. UNIVERSIDAD NACIONAL DE INGENIERÍA
FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
Fab
academy
Step three:
the image is prepared to take the Roland MDX-20
2012
milling machine

6. UNIVERSIDAD NACIONAL DE INGENIERÍA
FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
Fab
academy
Step four:
selection is performed for welding the pieces of the
2012
card

7. UNIVERSIDAD NACIONAL DE INGENIERÍA
FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
Fab
academy
Step five:
information is entered into the machine software
roland agila exported in two forms, one with white
2012
background and one with the tracks on the circuit

8. UNIVERSIDAD NACIONAL DE INGENIERÍA
FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
Fab
academy
Step six:
2012
proceed to make the circuit tracks and then make the cut

9. UNIVERSIDAD NACIONAL DE INGENIERÍA
FACULTAD DE ARQUITECTURA, URBANISMO Y ARTES
Conclusions.
1. The construction boart is the easy part. All information take
it from the tutorials
2. eagle program is difficult at first but practice can learn
Fab
more.
3. broke the mill to make the lack of experience boart. academy
Step seven:
2012
in this part of the work as parts are soldered to the card