A+ Pool Service is a family owned business offers swimming pools equipment installation, build new pool and spa with automatic pools covers and In ground pools in Chicago,Illinois.Visit: http://www.apluspools.us/
More than Just Lines on a Map: Best Practices for U.S Bike Routes
Automatic Pools Covers
1. Building Swimming Pool Maintenance
Building your own swimming pool can be a considerable huge
investment. To protect your investment, you need to keep it
maintained so you can make the most of it and avoid problems that
cost big bucks later on. To do this, it's best to follow a regular swimming
pool maintenance guide so you make sure you can do the necessary
tasks on schedule.
A good swimming pool maintenance guide covers not just the care of
your pool, but also the necessary adjustments to the water chemistry
to keep it safe for swimming. It's difficult to keep kids out of the pool,
especially in the summer months, and you do not want them to swim in
contaminated pool water.
2. Guideslines for Swimming Pool Maintenance of Pool Water
Chlorine Level - This should not fall under 1ppm or germs and
algae will start to grow in your pool. The ideal level is between 1
and 3ppm. It is best to check this every day. It is also advised to
shock your pool once a week to break down organic pollution. A
shock means bringing your chlorine levels between 6 and 10ppm.
pH Level - Ideal reading is between 7.2 and 7.6. This should also
be checked every day. If the pH goes above 7.8, you will have a
scale buildup, which will lead to problems in your filter and also
affect the efficiency of your chlorine. A low pH, on the other hand,
will corrode your pipes and rapidly consume the residual chlorine
present in the water.
Other water properties to check are the calcium and alkalinity
levels. Alkalinity affects the pH of the water and calcium affects
the hardness. A high PPM of calcium leads to cloudy water. You
can adjust all of these with chemical testers, just be careful about
handling them. Rule of thumb is to add chemicals to water, not
the other way around.
3. Your TA essentially acts as a buffer for the pH to prevent wild and
extreme swings in the amount or strength of hydrogen in your
swimming pool water. Your pH level should be between 7.4-7.8.
Any higher or lower than that can lead to the water irritating your
skin, calcium buildup in your piping as well as along the water line
and can prematurely corrode your swimming pool equipment. It
can lead to damaged o-rings and if you have a heater, it can cause
internal damage to that as well.
Test and take corrective action on your water chemistry on a
weekly basis for proper swimming pool maintenance. Follow
these 3 essential steps for sparkling swimming pool water that will
have your friends, family and neighbors rendered speechless
when they see your stunningly beautiful oasis!
4. To Know More, Please Visit:
http://www.apluspools.us/