1. Elite Thermal Engineers Pvt. Ltd.

2. About Us
 Established in 1983
 Group of technically & professionally qualified engineers /
technocrats
 Long experience in design, manufacture, supply & providing
after sale service of industrial thermal equipments
 Standardized designs as well as capability to design,
manufacture & supply custom engineered products
 Large customer reference base with installations all around the
world
 Manufacturing unit is located at Shirwal (Satara District) 45 kms
from Pune, Maharashtra, India

3. Quality Conformity
 IBR (Indian Boiler Regulations)
approved manufacturing facility with
IBR License
 ISO 9001 : 2008 Certified Quality
Management System

5. Our achievements
 Equipments with average thermal efficiencies of 93%
on NCV & 86% on GCV [PCRA (Petroleum
Conservation Research Association) has certified
these efficiency figures)
 Equipments are supplied with Heat Recovery Units as
standard accessories
 Innovative Flame Failure / Burner Programming
Circuit
 Getting significant business through repeat orders
from existing customers expanding their business
operations which justifies the faith shown by them in
our products’ quality, excellent performance,
reliability & prompt & reliable after sales service
provided to them

6. Range of Products
 Steam Boilers (Oil / Gas / Agrowaste / Solid fuel fired)
(100 kg/hr to 15000 kg/hr)
 Thermal Fluid Heaters (Oil / Gas / Agrowaste / Solid fuel fired)
(50000 kcal/hr to 3000000 kcal/hr)
 Hot Air Generators (Oil / Gas / Agrowaste / Solid fuel fired)
(25000 kcal/hr to 2500000 kcal/hr)
 Hot Water Generators (Oil / Gas / Agrowaste / Solid fuel fired)
(25000 kcal/hr to 2500000 kcal/hr)
 Fluid Bed Dryers (Available with in-built Hot Air Generators)
(5 kg/batch to 350 kg/batch)
 Industrial Roasters (Available with in-built Hot Air Generators)
(5 kg/batch to 350 kg/batch)
 Industrial Burners (Oil / LPG / Natural Gas / Biogas fired)
 Industrial Burners (Palm Oil Residue fired)
 Spray Cooling / Spray Congealing Plants
 Industrial Water Softeners (for boiler feed water)

7. Steam Boilers

8. Non-
Non-IBR Coil Type Steam
Generators’ Range

9. E - STEAM
 Type: 4 pass, vertical, coil
type instant steam
generators
 100 kg/hr to 1500 kg/hr
(F & A 100oC)
 Maximum working pressure:
10.54 kg/cm2 (g) / 15
kg/cm2 (g)
 Fuel: LDO / FO / LPG /
Natural Gas
 Thermal efficiency: 93% ±
1% based on NCV of fuel
 Heat recovery unit: Feed
water pre-heater
 In-built combustion air pre-
heater

10. Smoke Tube IBR Boilers’
Range

11. STEAMPACK
 Type: Horizontal, 3 pass, IBR
smoke tube, fully wet back type
 1 TPH to 15 TPH (F & A 100oC)
 Working pressure:10.5 kg/cm2
(g), 14 kg/cm2 (g), 17.5 kg/cm2
(g) & above
 Fuel: LDO / FO / LPG / Natural
Gas
 Thermal efficiency: 88% ± 1%
based on NCV of fuel, 92% ±
1% based on NCV of fuel with
HRU
 Heat recovery unit: Feed water
pre-heater / Combustion air
pre-heater

12. STBC
 Type: Horizontal, 3 pass, IBR
smoke tube type
 0.5 TPH to 4 TPH
(F & A 100oC)
 Working pressure:10.5 kg/cm2
(g), 14 kg/cm2 (g), 17.5 kg/cm2
(g) & above
 Fuel: Coal / Agro-waste
Briquettes
 Thermal efficiency: 75% based
on NCV of fuel, 78% based on
NCV of fuel with HRU
 Heat recovery unit: Feed water
pre-heater / Combustion air
pre-heater
 Furnace: Internal

13. AFEF
 Type: Horizontal, IBR water
tube & smoke tube combination
type boilers
 0.75 TPH to 10 TPH & above
(F & A 100oC)
 Working pressure:10.5 kg/cm2
(g), 14 kg/cm2 (g), 17.5 kg/cm2
(g) & above
 Fuel: Coal / Agro-waste
Briquettes / Bagasse
 Thermal efficiency: 75% based
on NCV of fuel, 78% based on
NCV of fuel with HRU
 Heat recovery unit: Feed water
pre-heater / Combustion air
Pre-heater
 Furnace: External membrane
walled

14. Industrial Water Softeners
(For Boiler Feed Water)

15. AQUASOFT
 Type: Ion Exchange
type Packaged Up
Flow Water
Softeners
 Up to 1400
m3/regeneration
(subject to feed
water analysis)

16. Thermal Fluid Heaters

17. FLUIDTHERM
 Type: 3 pass, vertical /
horizontal, coil type thermal
fluid heaters
 50000 kcal/hr to 2500000
kcal/hr & above
 Temperature: Up to 350oC
 Fuel: LDO / FO / LPG /
Natural Gas
 Thermal efficiency: 88% ±
1% based on NCV of fuel
 In-built combustion air pre-
heater
 Heat recovery unit (optional)

18. FLUIDTHERM (SOLID FUEL)
 Type: 3 pass, vertical, coil
type thermal fluid heaters
 50000 kcal/hr to 2500000
kcal/hr & above
 Temperature: Up to 350oC
 Fuel: Agro-waste / Coal /
Bagasse / Solid fuels
 Thermal efficiency: 78% ±
1% based on NCV of fuel
 Heat recovery unit:
Combustion air pre-heater

19. Hot Water Generators

20. AQUAWARM - A
 Type: 3 pass, vertical, coil
type hot water generators
 50000 kcal/hr to 2500000
kcal/hr & above
 Temperature: Up to 90oC for
non-pressurized type & up to
140oC for pressurized type
 Fuel: LDO / FO / LPG /
Natural Gas
 Thermal efficiency: 93% ±
1% based on NCV of fuel
 In-built combustion air pre-
heater
 Heat recovery unit (optional)

21. AQUAWARM - B
 Type: Smoke Tube Shell and
Tube type hot water
generators
 50000 kcal/hr to 2500000
kcal/hr & above
 Temperature: Up to 90oC for
non-pressurized type & up to
140oC for pressurized type
 Fuel: LDO / FO / LPG /
Natural Gas
 Thermal efficiency: 93% ±
1% based on G.C.V. of fuel
 Burner: Pressure jet, ON –
OFF or Modulating type

22. AQUAWARM – B (SOLID FUEL)
 Type: Smoke Tube Shell and
Tube type hot water
generators
 50000 kcal/hr to 2500000
kcal/hr & above
 Temperature: Up to 90oC for
non-pressurized type & up to
140oC for pressurized type
 Fuel: Coal / Agro-waste
 Thermal efficiency: 78% ±
1% based on NCV of fuel
with HRU
 Furnace: External Furnace
 HRU: Combustion air pre-
heater

23. Hot Air Generators

24. AIRPACK - SS
 Type: Horizontal, non-mixing
/ mixing shell in shell
 50000 kcal/hr to 2500000
kcal/hr & above
 Temperature: Up to 350oC
with non-mixing type & up to
750oC with mixing type
 Fuel: LDO / FO / LPG /
Natural Gas
 Thermal efficiency: 93% ±
1% for non-mixing type and
96% ± 1% for mixing type
based on NCV of fuel
 Burner: Pressure jet, ON –
OFF or Modulating type

25. AIRPACK - ST
 Type: Horizontal, non-
mixing, shell & tube
 50000 kcal/hr to 1000000
kcal/hr & above
 Temperature: Up to 250oC
 Fuel: LDO / FO / LPG /
Natural Gas
 Thermal efficiency: 93% ±
1% based on NCV of fuel
 Burner: Pressure jet, ON –
OFF or Modulating type

26. Industrial Dryers

27. Fluid Bed Dryers
 Type: Batch type
fluid bed dryers
 15 kg/batch to 350
kg/batch
 MOC: SS 304 / SS
316
 Standard and GMP
models

28. Industrial Roasters

29. Fluid Bed Roasters
 Type: Batch type
fluid bed roasters
 15 kg/batch to 350
kg/batch
 Suitable for products
like, Peanuts,
Aniseed (Sounff),
Rice Flakes etc.

30. Spray Cooling Plants

31. Spray Cooling Plants
Applications:
 Stearic acid / stearates
 Waxes
 Encapsulated materials
 Fats
 Glycerides
 Hydrates
 Inorganic / organic melts
 Quaternary ammonium
compounds

32. Industrial Burners

33. Oil / Gas Burners
Features:
 Pressure jet type
 Fully automatic in operation
 Simple ON - OFF version or
Modulating version available
 Easy for maintenance
 High versatility for different types of
industrial applications
 Available as either mono block or
duo block
 Suitable for firing fuels like LDO /
HSD / Biodiesel / FO / Gas
 In case of firing FO, fuel preparation
system with pre-heating
arrangement is offered as a part of
standard scope of supply

34. Palm Oil Residue Burners
Features:
 Pressure jet type
 Fully automatic in operation
 Simple ON - OFF version or
Modulating version available
 Easy for maintenance
 High versatility for different types of
industrial applications
 Available as either mono block or
duo block
 Suitable for firing Palm Oil Residue
 Fuel preparation system with pre-
heating arrangement is offered as a
part of standard scope of supply

35. Custom Engineered Products
 Shell & Tube Heat
Exchangers
 Finned Tube Heat
Exchangers
 Scrubbing Systems
 Pressure Vessels (with
agitator / without
agitator)
 Vegetable Oil Heating
Systems
 Dewaxing autoclave +
boiler package

36. Manufacturing Resources
 Manufacturing space with covered shades
covering an area of about 60000 sq. ft.
 Coil winding machines
 Plate bending machine
 Radial drilling machine
 Lathe Machine
 Own Quality Control
 Own Designs
 CAD softwares like AutoCad, Solidworks etc.

37. Low to Medium Work Shed

38. Heavy Work Shed 1

39. Heavy Work Shed 2

40. IBR Boilers in Shop

41. Market segments we serve
 Chemicals
 Pharmaceuticals
 Food & Beverages
 Hotel
 Rubber
 Agro
 Steel
 Construction
 Paper
 Textiles
 Educational institutions
 OEM s
 Merchant Exporters

42. Major Clients in Chemicals
Notice: Logos & Monograms used in this presentation are proprietary Trademarks of the respective companies displayed here

43. Major Clients in Pharmaceuticals
Notice: Logos & Monograms used in this presentation are proprietary Trademarks of the respective companies displayed here

44. Major Clients in Industrial Goods
Notice: Logos & Monograms used in this presentation are proprietary Trademarks of the respective companies displayed here

45. Other Miscellaneous Clients
Notice: Logos & Monograms used in this presentation are proprietary Trademarks of the respective companies displayed here

46. Some Overseas Clients
 Emirates National Oil Company (ENOC), UAE
 Asian Paints Ltd., Bangladesh
 Rocon International, China
 Micro Mechanical Works, Sri Lanka
 U.T.M.C., Malaysia
 Mahaban Chemie, Iran
 Kusum Exports, Ukraine
 Alwatani Fibre Glass Mfg. Co., Kuwait
 United Ink & Varnish Co. Ltd., Saudi-Arabia
 Eco Tech Middle East FZC, Dubai, UAE
 Kilitch Drugs (I) Ltd., Abu-Dhabi
 Ellies Pharma Ltd., Sudan
 Bentose Pharma Ltd., Lagos, Nigeria
 Universal Parantrals, Kenya
 Zanzibar State Trading Corporation, Tanzania
 East Coast Corrugated Company, South Africa
 Riley Industries Ltd., Uganda
 Troika Exports, Russia
 Dura Box, Canada
 Banco International, Mexico

47. Some Installations
Steam Boilers

52. Some Installations
Thermal Fluid Heaters

54. Some Installations
Fluid Bed Dryers / Roasters

56. Appreciations from Clients

57. Appreciations from Clients

58. Appreciations from Clients

59. Appreciations from Clients

60. Appreciations from Clients

61. Thank You
Contact Us:
Mumbai office:
Phone: +91-22-25331807
+91-22-
Fax: +91-22-25333069
+91-22-
Pune office:
Phone: +91-20-24219468 / 24219471
+91-20-
Fax: +91-20-24219474 / 24219477
+91-20-
E-mail: amol.atre@elitethermal.in
Visit us at www.elitethermal.in & www.elitethermal.net