Alaqua Inc is the supplier of crystalizer which is an industrial machine used to consolidate feed into solid crystals and clean water. Crystallization is a technique to separate solid and liquid after which the crystalizer helps to convert a liquid form of element into a solid form of crystals. Crystalizer has the ability to perform Zero Liquid Discharge (ZLD) that helps not waste or expel any liquid.

1. Type
4
The Plate-Shell Heat Exchanger (PSHX) is a completely
welded heat exchanger that combines the best features
of a shell and tube heat exchanger with that of a plate
heat exchanger.
Shell and Plate heat exchanger
A double pipe exchanger consists of one or more pipes or
tubes inside a pipe shell. Basically two straight pipe lengths
are connected at one end to form a U or “hair-pin.”
Longitudinal fins may be used on the outside of the inner
tube.
Double Exchanger
Types Of Heat Exchanger
A piece of equipment builds for efficient heat
transfer from one medium to another.
A shell and tube heat exchanger is a class of heat
exchanger designs. It is the most common type of
heat exchanger in oil refineries and other large
chemical processes, and is suited for higher-pressure
applications.
Shell and tube heat exchanger
Plate Heat Exchanger
A plate heat exchanger is a type of heat exchanger that
uses metal plates to transfer heat between two fluids.
This has a major advantage over a conventional heat
exchanger in that the fluids are exposed to a much
larger surface area because the fluids are spread out
over the plates.
www.alaquainc.com
For more information visit
Type
3
Type
2
Type
1
Type
5 A spiral heat exchanger is composed of two long, flat
plates wrapped around a mandrel or center tube,
creating two concentric spiral channels. The channels are
seal-welded on alternate sides to provide a sturdy
barrier between the fluids.
Spiral heat exchanger