1. CURRICULUM VITAE
PERSONAL DETAILS AHMED ABDELLATIF AHMED
Residential Address: Eldar elbydaa Riyadh KSA
Mobile: +0966538539971
Date of Birth: 15 May 1975
Nationality: Egyptian
E mail ahmedabdellatif52@yahoo.com
Driving license KSA
CAREER OBJECTIVE
To expand skills and experience within the quality inspection field and quality control
EDUCATION HISTORY
Nov 2013 – Current MOTABAQAH CO (Saudi specialized lab),
Jan 2003 – Nov 2013 GOEIC (general Organization for export and import good)
international Cairo air port Egypt
Dec 1999 – Dec 2002 Quality inspector at Ideal standard under license of American
standard for porcelain and plastic industry
Nov 2013 – Current
Jan 2003 – Nov
2013
*MOTABAQAH CO (Saudi specialized lab),
http://www.motabaqah.com.
Car spare parts inspector
Responsibilities and achievements:
 Inspection the brake pads and brake shoe according to ISO
6312 ,ISO 6310, ISO 6314, UNECE Regulation 90
 Inspection oil filter according to ISO 4548
 Inspection fuel filter according to 4020
 Inspection radiators according to GSO135
 Inspection wheels according to UNECE 124
 Handling with samples in lab
 Deal with machine according to work instruction
 Select test method (according used standard)
 Perform the test and sending the reports to direct manager
 Perform the maintenance for the machines in lab
 Make a backup for the results.
 Assisted in lab accreditation (EGAC and SAC)
 Familiar with requirement of ISO 17025
**GOEIC (general Organization for export and import good)
Responsibilities and achievements:
1. Supervisor of braking system Lab; from 12/2011 Nov 2013.
Work as a team leader with qualified team to inspect all brake
system
I. Inspect Break drum , break disc, pad and shoe
according to regulation 90
 Use XRF device to detect asbestos and we sure that every
bad or shoe is asbestos free before any test

2.  Shear test according to ISO 6312
 Compressibility test according to ISO 6310
 Hardness of friction material according to ISO 6506
 Tensile test according to ISO 8692
 Friction coefficient and ware rate of friction material
according JIS D 4411
 Friction surface roughness for brake disc and drum according
to ISO 1302.
 Hardness for brake disc and drum according to ISO 6506
II. Clutches
Friction coefficient and ware rate of friction material
according JIS D 4311
 Assisted in lab accreditation (EGAC)
2. -Supervisor of plain bearing lab; from 2008 to 12/2011
Work as a team leader with qualified team to inspect all plain
bearing types
( bushes, thrust washers and thin plain bearing )
I. Bushes
Cheek dimensions according to ISO3548 and chemical
composition and hardness according to ISO438
II. Thrust washers
Cheek dimensions according to ISO 6525 and chemical
composition and hardness according to ISO438
III. Thin plain bearing
Cheek dimensions according to ISO3547 and chemical
composition and hardness according to ISO4383
-Inspector in ball joint lab; from 2004 to 12/ 2007.
3. Inspector in ball joint lab; from 2005 to 12/ 2007.
Responsible for ball joint inspection according to
JASO F 901 for hardness test and dimension test
SAE J 193 for impact test, fatigue test, tensile load , pull
out and push in test
4. Inspector in piston ring lab; 2004 to 2005.
Cheek Dimension and hardness of material according to
ISO 6621
5. Inspector in roll bearing lab; 2003 to 2004.
Cheek Dimension of bearing according to Egyptian
standards (ISO standards)
chemical analysis and hardness of material according to
ISO 693/17
Measuring of dynamic load according to ISO 281
6. Member of transport means committee in Egyptian
Organization for standardization and quality (ESO)
This committee responsible for answering any question or
complaint in transport means field
Release and revision any Egyptian standard specialized
this field
Other efforts related to work in labs:
 Sharing in committees to study the customer
complaints
 Sharing in committees to respond to customer
queries

3. Dec 1999 – Dec
2002
 Sharing in the Committee to decide the technical
and
 delivery many technical devices as hardness
tester, Shear tester, Compressibility tester and
***Ideal standard Co
Responsibilities and achievements:
 Test all row material before uses
 Test intermediate product during polymerization process
 Test Final product.
OTHER SKILLS AND CERTIFICATES
Computer Skills:
 Microsoft XP applications (Word, Excel, Office, PowerPoint, Outlook, Access) –
Advanced
 Microsoft Office Document Imaging and Scanning - Advanced
 Acrobat Reader 6.0 – Intermediate
 AutoCAD 2010 – Beginner
Language Skills:
 Arabic(Native Tongue)
 English - Basic (reading and writing skills)
Other courses
Office master 15 /3/2010 15/4/2010 Microsoft
Business administrator 2/12/2002 12/12/2002 American university in Cairo
English Berltiz course 17/12/2006 7/5/2007 Berltiz center in Cairo
Quality assurance 27/11/2010 29/11/2010 HEQIP Center in Cairo
Quality tools 27/11/2010 29/11/2010 HEQIP Center in Cairo
ICDL 25/1/2006 25/3/2006 Cairo university
Intel program 80 h Oct 1999 Microsoft center in Ain sham university
Internal combustion motor
system
1 Jan 2005
31 Jan
2005
Engineering Faculty in Ain sham university
Braking system for road
vehicles According to
Regulation 90
28 sep
2009
6 march
2009
Federal mogul Company for spare parts
industrials
Piston rings testing
according to ISO 6621
14 Feb
2010
18 Feb
2010
Military factory No 99 In Helwan city Cairo
Egypt

4. Test of plane bearing
Parts according to ISO
3547
21 Jun
2009
2 Jul 2009
Military factory No 909 In Shobra city
Cairo Egypt
PERSONAL COMPETENCIES
 Ability to work in a fast-paced environment to set deadlines
 Excellent oral and written correspondence with an exceptional attention to detail
 Highly organized with a creative flair for project work
 Enthusiastic self-starter who contributes well to the team
INTERESTS AND ACTIVITIES
 Chess , Reading , graphic design , music