Một hệ thống chống sét được tạo ra để bảo vệ kiến trúc một công trình xây dựng. Nhằm để tránh được những thiệt hại bởi dòng sét gây ra “ một dòng sét lên tới 200KA”. Một hệ thống chống sét bảo vệ công trình bằng cách nó di chuyển dòng sét xuống dưới đất một cách nhanh chóng.
Nếu không có hệ thống chống sét: Thì công trình có thể bị hư hại lớn do sét đánh.
CÔNG TY CP SẢN XUẤT THIẾT BỊ ĐIỆN CÔNG NGHIỆP CÁT VẠN LỢI
Nhà máy: Lô F1.2 đường số 8, khu công nghiệp Cơ khí ô tô TP.HCM, Hòa Phú, Củ Chi, TP.HCM
Văn phòng: Số 61, đường số 7, khu dân cư Cityland, phường 7, quận Gò Vấp, TP.HCM
Điện thoại: (028) 2253 3939
Chăm sóc khách hàng: 1900-5555-49
Website: https://www.catvanloi.com/
Email: baogia@catvanloi.com
#CÁT_VẠN_LỢI
#HỆ_THỐNG_CHỐNG_SÉT
#HỆ_THỐNG_CHỐNG_SÉT_CVL
7. 96 CATVANLOI.COM
Nhaän hiïåu àûúåc caác kyä sû cú àiïån tin duâng
Vùn Phoâng
61 Àûúâng söë 7,
KDC CityLand Center Hills,
P. 7, Q. Goâ Vêëp, TP.HCM
Tel: 84-28-35886496
84-28-22533939
Fax: 84-28-22531250
Email: baogia@catvanloi.com
baogiaduan@catvanloi.com
sales@catvanloi.com
Nhaâ maáy
Lö F1.2 Àûúâng söë 8
KCN Cú khñ ö tö TP.HCM,
X.Hoâa Phuá, H.Cuã Chi, TP.HCM
Intensive Test And Inspection Of Ground Rod
Ground Rods should pass the following criterions of international standars as shown:
1.Thickness Inspection
Copper shell of each ground rod shall be passed the thickness inspection to ensure its protective coating.
The copper shell not be less than 0.25 mm (250 micron) thick at any point met to UL 467 standard
2.Adherence of Coating Test
There shall be no separation of the coating from the steel core when subjected to the test described as
follow met with UL 467 standard requirements. Peeling of the coating by the steel plates or the jaws of the
vise shall be allowed.
3.Bending Strength Test
There shall be no cracking of the coating when subjected to the test met with UL 467 standard requirements.
The application of force shall be such that the rod is permanently bent through a 300 angle.
4.Straightness Test
Ground rod should be passed straightness
test to ensure in its straightness
and high tensile with acceptable sag.
The deviation of every 305 mm ground
rod shall be less than 3.05 mm.
giaãi phaáp troån goái vêåt tû cú àiïån (M&E) cho moåi cöng trònh
Coåc tiïëp àõa theáp maå àöìng (Viïåt Nam)
( Copper Bonded Grounding Rod)
Tiïu chuêín (Standard): UL 467/ IEC 62561/ TCVN 9385
Vêåt liïåu (Material): Theáp maå àöìng (Copper bonded steel), Àöìng (Copper)
(***) Maä saãn phêím chi tiïët seä cùn cûá trïn baãng baáo giaá
Maä saãn phêím
Product Code
(***)
Àûúâng kñnh
danh nghôa
Nominal Outside
Diamater
(mm)
Àûúâng kñnh thên
Outside Diamater
mm
(inch)
Chiïìu daâi
Length
(mm)
CND161424 16 14.2 (5/8”) 2400/3000
CND161624 16 16 2400/3000
CND191730 19 17.2 (3/4”) 3000
LIGHTNING
PROTECTION
&
GROUNDING
ACCESSORIES CHÖËNG SEÁT CÖÍ ÀIÏÍN & TIÏËP ÀÕA
Caáp àöìng trêìn ( Bare Copper Cable)
Tiïu chuêín (Standard): IEC 62561/ TCVN 5064
Vêåt liïåu (Material): Àöìng (Copper)
Maä saãn phêím
Product Code
Tiïët diïån caáp
Cable Size (mm2
)
CDT50 50
CDT70 70
CDT95 95
CDT120 120
CDT150 150