Thunderbike triumph bonneville, thruxton, scrambler saddlebag support fitting instructrions
•
0 gostou•515 visualizações
Instructions for fitting Thunderbike pannier support brackets to the Triumph Bonneville, Thruxton or Scrambler
Recomendados
Mais conteúdo relacionado
Destaque
Semelhante a Thunderbike triumph bonneville, thruxton, scrambler saddlebag support fitting instructrions
Semelhante a Thunderbike triumph bonneville, thruxton, scrambler saddlebag support fitting instructrions (8)
Último
Último (20)
Thunderbike triumph bonneville, thruxton, scrambler saddlebag support fitting instructrions
- 1. Bonneville Pannier Supports Pick List / Fitting instructions ITEMS LH RACK RH RACK MOUNT BOLTS X2 M8 x 20 FITTING INSTRUCTIONS. 1. Remove Seat 2. Support bike and remove upper shock from frame mount ( one side at a time) 3. Fit the front mount inside the shock do not tighten ( again one side at a time) 4. Line up the rear and insert the fastener (this may require you to flex the rack slightly) 5. Tighten the rear fastener 6. Tighten the shock mount fastener 7. Refit seat Make sure you always have one shock attached to the frame at all times Front Mount View Rear Mount View Thunderbike Engineering Ltd 2/46A Muritai Street, Tahunanui, Nelson 7011, New Zealand Phone: +64 (0)3 548 5787 parts@thunderbike.co.nz www.thunderbike.co.nz