This document contains certificates from Siemens Wind Power documenting training completed by Thomas Pasos. The certificates show that Thomas Pasos has completed trainings on topics such as basic harness use, first aid/CPR, rescue from wind turbines, electrical and hydraulic systems, crane and hoist operation, and bolt torque/tension. The certificates provide details on the training contents, objectives, durations and certify that Thomas Pasos is qualified to perform certain tasks according to Siemens Wind Power procedures and standards.

1. www.siemens.com
Head of Technical and Safety Training
Siemens Wind Power A/S
If any questions contact Training Center DK: +45 99 42 88 55
Certificate
KRIMA EHS Reporter Training
(Service) - eLearning
SE-B-2405
GID no./Company: Z0036AMM Siemens Energy, Inc. Name: Thomas Pasos
Date of completion:
Date of expiry: No expiry
This certificate is only valid as long as the certificate holder has access to updated
Siemens Wind Power documentation.
Purpose
KRIMA EHS (Service) Reporter eLearning - How to report and follow up an EHS Event
Objectives
After the training the participant will be able to find and login to KRIMA EHS (Service),
report EHS Event and follow up the report.
Contents
1) how to start up KRIMA EHS (Serviec) - log in using PKI card and Windows login;
2) how to start, fill-out and save (send) your report;
3) how to follow up your report.
Who should attend?
It is mandatory training in Energy Sector for user who need to report and follow-up EHS
events and incidents/accidents.
Course duration
1 hours

2. www.siemens.com
Houston, 22 March 2013
Head of Technical and Safety Training
Siemens Wind Power A/S
If any questions contact Training Center DK: +45 99 42 88 55
Certificate
Advanced Rescue Zone 1-2
SE-P-00001
GID no./Company: Z0036AMM Siemens Energy, Inc. Name: Thomas Pasos
Date of completion: 22 March 2013
Date of expiry: 22 March 2014
This certificate is only valid as long as the certificate holder has access to updated
Siemens Wind Power documentation.
Purpose
- Access to rescue zone 1, 2, & 2A in Siemens Wind turbines. The participant is qualified
to carry out rescue and evacuations from Siemens Wind Turbines zones 1, 2, & 2A in
accordance with Siemens Procedure for Working at Heights, Rescue from Heights and
Visitor in Wind Turbine Generator.
Contents
The participant has demonstrated:
- Safe and correct rescue of casualties in zone 1, 2, & 2A in wind turbines
- Safe and correct use of Siemens Rescue Kit in rescue situations
- Safe and correct assistance for rescue teams
- Safe and correct harnessing of an unconscious person on a spine board and a basket
stretcher
- Safe and correct evacuation of casualties from wind turbines using the Skylotec Milan
A-020, Milan Hub A-024 and the Milan Power A-029
- Safe and correct assistance in rescue situations with helicopter assistance
Duration
36 hours
Competences
Access to zone 1, 2, & 2A in Siemens Wind turbines related to safety alert 17/08 R2 The
participant is qualified to carry out rescue and evacuations from Siemens Wind Turbines
zones 1, 2, & 2A in accordance with Siemens Procedure 05.17

3. www.siemens.com
Orlando Fl., 20 March 2014
Head of Technical and Safety Training
Siemens Wind Power A/S
If any questions contact Training Center DK: +45 99 42 88 55
Certificate
Advanced Rescue Zone 1-2
Refresher
SE-P-00100
GID no./Company: Z0036AMM Siemens Energy, Inc. Name: Thomas Pasos
Date of completion: 20 March 2014
Date of expiry: 20 March 2015
This certificate is only valid as long as the certificate holder has access to updated
Siemens Wind Power documentation.
Purpose
The training refreshes the participant's skills to carry out rescues from Siemens wind
turbines from rescue zones 2 & 2A in accordance with Siemens' Procedure for Working
at height, Rescue from height & Visitor in WTG.
Contents
The participant has demonstrated:
- Safe and correct rescue of casualties in zone 1, 2, & 2A in wind turbines
- Safe and correct use of Siemens Rescue Kit
- Safe and correct harnessing of an unconscious person on a spine board and a basket
stretcher
- Safe and correct evacuation of casualties from wind turbines using Siemens Rescue
Kit, Milan A-020, Milan Hub A-024 and Milan Power A-029
Duration
16 hours
Competences
The participant is qualified to carry out rescue and evacuations from Siemens Wind
Turbines zones 1, 2, & 2A in accordance with Siemens Procedure 05.17

4. www.siemens.com
Houston, 06 November 2012
Head of Technical and Safety Training
Siemens Wind Power A/S
If any questions contact Training Center DK: +45 99 42 88 55
Certificate
Basic Harness PFPE
SE-P-00200
GID no./Company: Z0036AMM Siemens Energy, Inc. Name: Thomas Pasos
Date of completion: 06 November 2012
Date of expiry: No expiry
This certificate is only valid as long as the certificate holder has access to updated
Siemens Wind Power documentation.
Purpose
The training focuses on providing the awareness of personal fall protection equipment.
The participant has learned how to care for, inspect and maintain the equipment for
daily use in order to perform tasks at height safely and sensibly. Training consists of
interactive theoretical class and practical exercises on ladder. Practical experience
includes proper usage and general inspection of PFPE.
Contents
The participant is able to demonstrate:
- Safe and correct fitness of Miller harness
- Safe and correct usage of harness and accessories.
- Safe and correct positioning on a ladder
- Correct user inspection
- Understanding of standards and regulations applying to working at heights
- Safe and correct use of fall arrest systems
Duration
4 hours
Competences
The participant has obtained competences to use Miller harness in a correct and safe
manner as well as perform daily inspection and maintenance of this PFPE.

5. www.siemens.com
Houston, 07 November 2012
Head of Technical and Safety Training
Siemens Wind Power A/S
If any questions contact Training Center DK: +45 99 42 88 55
Certificate
Basic Height Rescue Zone 1
SE-P-00300
GID no./Company: Z0036AMM Siemens Energy, Inc. Name: Thomas Pasos
Date of completion: 07 November 2012
Date of expiry: 07 November 2013
This certificate is only valid as long as the certificate holder has access to updated
Siemens Wind Power documentation.
Purpose
Using step by step training to provide an extensive knowledge on how to perform a
safe rescue and evacuation of casualties from wind turbines. Learning includes
theoretical insight to Milan rescue equipment and simulated exercises. The participant
has performed live rescue and evacuation of an unconscious casualty from the ladder
after a fall.
Contents
The participant is able to:
- Safe and correct use of Miller harness and rescue equipment. Safe and correct use of
Milan A- 020 and Milan hub A-024
- Accessing suitable anchor points
- Safe and correct techniques when working on ladder with fall arrest manyard, Cabloc
and fall restraint lanyards
- Choose a safe rescue and evacuation path from wind turbine considering location,
position, casualty's condition, etc.
- Safe and correct rescue of casualties from zone 1 (tower/nacelle)
- Single and double evacuation from height
- Correct user inspections of Milan A-020 and Milan hub A-024
Duration
12 hours
Competences
The participant is certified to work in zone 1 (tower/nacelle) access areas and is
competent to perform basic rescue and evacuation of oneself and co-worker.

6. www.siemens.com
USA - Call for info, 09 May 2013
Head of Technical and Safety Training
Siemens Wind Power A/S
If any questions contact Training Center DK: +45 99 42 88 55
Certificate
Blade Rescue Horizontal
SE-P-01600
GID no./Company: Z0036AMM Siemens Energy, Inc. Name: Thomas Pasos
Date of completion: 09 May 2013
Date of expiry: 09 May 2015
This certificate is only valid as long as the certificate holder has access to updated
Siemens Wind Power documentation.
Contents
The training provides the participant with the necessary skills to carry out blade rescue
while the blades are in horizontal position 0 to 9 degrees (zone 3) in 1.0, 1.3, 2.0 and
2.3 CS + VS Siemens Wind turbines
The participant has demonstrated:
- Safe and correct use and user inspection of the Siemens Spec Pak kit.
- Safe and correct rescue from blades (zone 3)
- Assessing suitable anchor points
Duration
- 8 hours
Competences
- The delegates are competent in the use of the following evacuation devices: Skylotec
Milan A-020, Milan Hub A-024 and the Milan Power A-029.

7. www.siemens.com
Houston, 05 November 2012
Head of Technical and Safety Training
Siemens Wind Power A/S
If any questions contact Training Center DK: +45 99 42 88 55
Certificate
First Aid / CPR / AED
SE-P-05050
GID no./Company: Z0036AMM Siemens Energy, Inc. Name: Thomas Pasos
Date of completion: 05 November 2012
Date of expiry: 05 November 2014
This certificate is only valid as long as the certificate holder has access to updated
Siemens Wind Power documentation.
Cardiopulmonary Resuscitation (CPR)
Use of an Automated External Defibrillator (AED)
Assessment and Personal Safety
Activating EMS
Clearing and Protection the Airway and Ventilation
Chest Compressions and One-Rescuer DPR
AED Operation and Basic Maintenance
Control of Bleeding and Shock management
Foreign Body Airway Obstruction
Warning signs of Illness
Mechanism of Injury
Emotional impact of providing care
Bloodborne Pathogens

8. www.siemens.com
Houston, 09 November 2012
Head of Technical and Safety Training
Siemens Wind Power A/S
If any questions contact Training Center DK: +45 99 42 88 55
Certificate
Rigging
SE-P-05150
GID no./Company: Z0036AMM Siemens Energy, Inc. Name: Thomas Pasos
Date of completion: 09 November 2012
Date of expiry: No expiry
This certificate is only valid as long as the certificate holder has access to updated
Siemens Wind Power documentation.
Purpose
Describe methods of properly managing, and actions necessary to protect Siemens
Wind Power employees and employed subcontractors during the inspection, use, and
maintenance of rigging equipment
Objectives
- This training enables the participants to:
- Understand and explain the importance of Federal Occupational Safety and Health
Administration (OSHA) regulations, as they relate to safe rigging procedures
- Perform initial inspection, frequent inspection and periodic inspection of all rigging
equipment
- Estimate load weights before lifting and be aware about communication hand signals,
radio protocol from signaler to crane operator
- Demonstrate hands-on skills necessary to rig a load and lift the load safely
Contents - General rules for rigging
Course duration - 4 hours

9. www.siemens.com
Houston, 02 November 2012
Head of Technical and Safety Training
Siemens Wind Power A/S
If any questions contact Training Center DK: +45 99 42 88 55
Certificate
US Regional Safety Compliance
Training (Regional HSE)
SE-P-05200
GID no./Company: Z0036AMM Siemens Energy, Inc. Name: Thomas Pasos
Date of completion: 02 November 2012
Date of expiry: No expiry
This certificate is only valid as long as the certificate holder has access to updated
Siemens Wind Power documentation.
Purpose
Compliance with US federal law minimum training requirements, and ensure all
employ-ees and contractors are aware of Siemens Americas regional Local Specific
Procedures and requirements such as LOTO, Confined space and PPE.
Contents
The participant has gained knowledge and skills within:
- Reading and understanding a material safety data sheet (MSDS)
- Local requirements for operating forklifts and sky lifts
- The importance of personal protection equipment (PPE) and the responsibilities
related to use of PPE
- The ability to complete Lock Out Tag Out & Confined space forms unassisted
- Recognizing hazard associated with 'struck by & caught between' hazards
- Recognizing the hazards associated with hand and power tools and their
responsibilities as the relate to tools
- Safely conduct manual lifts such as carrying tools and parts to and form truck
- Extreme temperature practices
- Companies electrical safety policies and practices
- Tailboards, JHAs, and current US Safety Alerts
Duration
2 days
Competences
US Regional Safety Compliance Course certificate

10. www.siemens.com
Houston, 13 November 2012
Head of Technical and Safety Training
Siemens Wind Power A/S
If any questions contact Training Center DK: +45 99 42 88 55
Certificate
Drivers Safety Training
SE-P-05250
GID no./Company: Z0036AMM Siemens Energy, Inc. Name: Thomas Pasos
Date of completion: 13 November 2012
Date of expiry: No expiry
This certificate is only valid as long as the certificate holder has access to updated
Siemens Wind Power documentation.

11. www.siemens.com
Orlando Fl., 12 September 2014
Head of Technical and Safety Training
Siemens Wind Power A/S
If any questions contact Training Center DK: +45 99 42 88 55
Certificate
SWP Basic Turbine Electricity And
Hydraulics
SE-P-06000
GID no./Company: Z0036AMM Siemens Energy, Inc. Name: Thomas Pasos
Date of completion: 12 September 2014
Date of expiry: No expiry
This certificate is only valid as long as the certificate holder has access to updated
Siemens Wind Power documentation.
Purpose
To develop the skills to work on/with electrical and hydraulic systems according to
Siemens Wind Power rules through theory and practical training and using Siemens
Wind Power selected tools.
Contents
The participant has gained knowledge and skills within:
- Electrical system concepts such as Ohms law, AC & DC voltage, transformer, diodes,
contactors etc.
- Hydraulic system aspects such as filter technology, hydraulic oil, brake station and
etc.
- Correct and safe troubleshooting on the basic electric and hydraulic systems
- Safe and proper use of tools and measuring devices ( manometer, multimeter) and
knowledge of relevant Material Safety Data Sheets (MSDS)
- Basic´s in read, understand and analyze electric and hydraulic diagrams
Duration
30 hours (4 days)
Competences
The participant is able to do work place assessment and perform basic troubleshooting
on electric and hydraulic systems following the safety regulations and use relevant
Siemens Wind Power documentation.

12. www.siemens.com
Houston, 08 November 2012
Head of Technical and Safety Training
Siemens Wind Power A/S
If any questions contact Training Center DK: +45 99 42 88 55
Certificate
Bolt Torque and Tension
SE-P-06100
GID no./Company: Z0036AMM Siemens Energy, Inc. Name: Thomas Pasos
Date of completion: 08 November 2012
Date of expiry: No expiry
This certificate is only valid as long as the certificate holder has access to updated
Siemens Wind Power documentation.
The holder of this certificate has obtained knowledge and skills within:
- Why Siemens Wind Power’s personnel must tighten bolts as described in the manuals
- Different bolt types and how they are marked.
- The impact of over-tightening or under-tightening bolts.
- Safety instructions for hydraulic tools used for bolt torque and tensioning.
- How to decide whether a tower flange needs shimming or not.
- How to fill out checklists applied to bolt tightening and shimming of tower flanges.
- Inspecting pumps and hoses visually to identify damages and leaks
- Operating torque and tension tools correctly in accordance with safety and technical
instructions found in SWP’s manuals.
- Proper use of PPE and safety equipment.
- Identifying different bolt types and determine their nominal torque as described in
the SWP’s manuals.
- Filling out checklists applied to bolt torque and tension tasks.
Duration: 8 hours
Competencies:
The holder of this certificate is qualified to perform bolt torque & tensioning
under supervision of a Maintenance Technician or TSWA approved
Technician. The technician is obligated to obtain a Task Specific Work
Approval (TSWA) to work unsupervised.

13. www.siemens.com
Houston, 09 November 2012
Head of Technical and Safety Training
Siemens Wind Power A/S
If any questions contact Training Center DK: +45 99 42 88 55
Certificate
Crane and Chain Hoist User
Training
SE-P-06600
GID no./Company: Z0036AMM Siemens Energy, Inc. Name: Thomas Pasos
Date of completion: 09 November 2012
Date of expiry: No expiry
This certificate is only valid as long as the certificate holder has access to updated
Siemens Wind Power documentation.
Purpose
The training is designed to enable the participant to operate the HMF supplied cranes
and chain hoist used in the wind turbines with compliance to Siemens Wind Power
documentation.
Contents
The participant has gained a profound knowledge and skills within:
- Both crane and electrical chain hoist structure and its diverse components
- The operational aspects of the crane and chain hoist
- Directions and prohibitions for chain hoist use related to Siemens wind turbine (SWT)
works
- Relevant documentation and special equipment
- Hydraulic, Electric and load diagrams
- Safety inspection in daily use
- Identify the correct lifting equipment used within Siemens Wind Power
- Risk assessment
Duration
4 hours
Competences
The participant is qualified to operate the crane and chain hoist in a safe and proficient
manner.

14. www.siemens.com
Orlando Fl., 12 September 2014
Head of Technical and Safety Training
Siemens Wind Power A/S
If any questions contact Training Center DK: +45 99 42 88 55
Certificate
Gearbox inspection
SE-P-06800
GID no./Company: Z0036AMM Siemens Energy, Inc. Name: Thomas Pasos
Date of completion: 12 September 2014
Date of expiry: No expiry
This certificate is only valid as long as the certificate holder has access to updated
Siemens Wind Power documentation.
Purpose
The aim of the training is to enable the participant to do service inspection of the
gearbox with compliance to Siemens Wind Power documentation. This training can be a
part of task specific instruction.
Contents
The participant has gained the knowledge and skills within:
- Different gear types
- Gearbox components and its build up
- Read, fill out and understand a gearbox report released by Siemens Wind Power
- Inspection performance by means of guidelines from service technique - handed out
material
- Keep esthetical working environment (gearbox, tools and etc.)
- Inspection for different damages (micro pitting, spalling, cracks, fracture, etc.)
- The turbine conditioning monitoring system (TCM) for bearings and teeth damage
detection
Duration
4 hours

15. www.siemens.com
Houston, 31 October 2012
Head of Technical and Safety Training
Siemens Wind Power A/S
If any questions contact Training Center DK: +45 99 42 88 55
Certificate
Technical Safety Training
SE-P-07900
GID no./Company: Z0036AMM Siemens Energy, Inc. Name: Thomas Pasos
Date of completion: 31 October 2012
Date of expiry: No expiry
This certificate is only valid as long as the certificate holder has access to updated
Siemens Wind Power documentation.
The holder of this certificate has obtained the following qualifications:
This course, in conjunction with the completed courses on Level 1 (Basic Safety) and
Level 2 (Work at Heights), will meet minimum requirements to work on a service /
installation site and to climb turbines supervised by a competent technician.

16. www.siemens.com
Orlando Fl., 10 October 2014
Head of Technical and Safety Training
Siemens Wind Power A/S
If any questions contact Training Center DK: +45 99 42 88 55
Certificate
LEVEL 5 Operations and
Maintenance SWT 2.3VS
SE-P-08500
GID no./Company: Z0036AMM Siemens Energy, Inc. Name: Thomas Pasos
Date of completion: 10 October 2014
Date of expiry: No expiry
This certificate is only valid as long as the certificate holder has access to updated
Siemens Wind Power documentation.
The above named participant has successfully completed the coursework for 2.3 O&M
Technician. The participant is qualified to perform all duties involving the scheduled
maintenance for the 2.3 Siemens Wind Turbine. After approval from an authorized site
AP, the participant can start and stop the turbine, perform Lock-Out Tag-Out (LOTO)
procedure for service, complete the tasks from the Service Checklist, supervise
technicians in performing the scheduled maintenance, and has attained the
Maintenance Technician qualification.

17. www.siemens.com
Houston, 12 November 2012
Head of Technical and Safety Training
Siemens Wind Power A/S
If any questions contact Training Center DK: +45 99 42 88 55
Certificate
Intranet Tutorial / Supply Chain
Overview
SE-P-44300
GID no./Company: Z0036AMM Siemens Energy, Inc. Name: Thomas Pasos
Date of completion: 12 November 2012
Date of expiry: No expiry
This certificate is only valid as long as the certificate holder has access to updated
Siemens Wind Power documentation.
Intranet Tutorial
Overview of basic computer skills along with navigation around the Siemens Workspace
websites and other important company information.
Supply Chain Overview
Overview of Inventory Management as it relates to the technician responsibilities from
the field.
Focus will be on understanding the flow of materials and how to create and utilize work
orders, inventory movement sheets, SL1 bin, and the parts return process.

18. www.siemens.com
Orlando Fl., 10 October 2013
Head of Technical and Safety Training
Siemens Wind Power A/S
If any questions contact Training Center DK: +45 99 42 88 55
Certificate
First Aid GWO
SE-P-50010
GID no./Company: Z0036AMM Siemens Energy, Inc. Name: Thomas Pasos
Date of completion: 10 October 2013
Date of expiry: 10 October 2015
This certificate is only valid as long as the certificate holder has access to updated
Siemens Wind Power documentation.
This is to certify that this course participant has attended the First Aid GWO course. This
course teaches the participant to administer safe and effective First Aid while working
in the wind turbine industry and in a wind turbine generator environment. This course
conforms with the GWO First Aid course standard and enables the course delegate to
gain the following skills and competencies via theoretical and practical training:
- Legislation
- Anatomy
- Management of an incident
- Lifesaving First Aid and the Airways-Breathing-Circulation (ABC) Primary Survey
- CPR including the use of an AED
- Ordinary First Aid
- Scenario-based practical training
- Olaes Bandage and C.A.T. Turniquet
Duration: 16 hours.
This course participant is now a competent First Aider within GWO accredited
companies and sites.

19. www.siemens.com
Houston, 15 November 2012
Head of Technical and Safety Training
Siemens Wind Power A/S
If any questions contact Training Center DK: +45 99 42 88 55
Certificate
Manual Handling GWO
SE-P-50020
GID no./Company: Z0036AMM Siemens Energy, Inc. Name: Thomas Pasos
Date of completion: 15 November 2012
Date of expiry: 15 November 2014
This certificate is only valid as long as the certificate holder has access to updated
Siemens Wind Power documentation.
Purpose:
The aims of this module are to give the participants the awareness through theoretical
and practical training to encourage positive manual handling behavior and perform
manual handling activities in a safe manner within the wind turbine industry.
Contents:
Introduction, Legislation Risks and hazards, Spinal anatomy and posture, Planning lifts,
Risk controls and lifting techniques, Behavioral safety, Scenario based training and
Evaluation.
Duration:
4 hours
Competencies:
Upon completion of this courses the delegate are considered competent to work with
manual handling within GWO accredited companies or sites.

20. www.siemens.com
Orlando Fl., 15 October 2013
Head of Technical and Safety Training
Siemens Wind Power A/S
If any questions contact Training Center DK: +45 99 42 88 55
Certificate
Working at Heights GWO
SE-P-50040
GID no./Company: Z0036AMM Siemens Energy, Inc. Name: Thomas Pasos
Date of completion: 15 October 2013
Date of expiry: 15 October 2015
This certificate is only valid as long as the certificate holder has access to updated
Siemens Wind Power documentation.
Purpose:
The aim of this course is to provide the participants with the necessary basic knowledge
and skills through theoretical and practical training to use basic fall protective
equipment, to perform safe work and to conduct safe and basic rescue from heights, in
a remote wind turbine environment and at minimum heights of 6.75m in accordance
with GWO Basic Safety Training Working at Heights.
Equipment:
- Söll Universal II Wind
- Cabloc AC350/4
- LadSaf Detachable Cable Sleeve (model number 6116540)
- Milan Evacuation device A-020
- Milan Hub rescue device A-024
- Milan Power rescue device A-029
Competencies:
Upon completion of this course the delegate is considered competent to conduct work
at heights at GWO accredited companies or sites.
Duration: 16 hours