This document provides information on the Flowsensor Type WS-PE DN 40-100 flow sensor from Sensus Metering Systems GmbH. It can measure hot water up to 180°C or 200°C, depending on the pressure rating. It has an interchangeable measuring element and is not influenced by external magnetic fields. It is available in sizes from 40 to 100mm and can be used to measure hot water in industrial applications like power plants. It provides accurate flow measurement with minimum, transitional, and maximum flow rates specified for each size.
Strategies for Landing an Oracle DBA Job as a Fresher
Sensus WS-PE High Pressure Hot Water Meter - Spec Sheet
1. Sensus Metering Systems GmbH
Hannover D-30880 Laatzen • Meineckestraße 10
Weitere Informationen unter http://www.sensus.com/esaap
LB 5800 INT • Page 1 of 3 08/2006
Flowsensor Type WS-PE DN 40...100
for hot water up to 180°C / 200°C
Special Features
• Interchangeable measuring element
• No influence by external magnetic
fields
• Pulsers may be equipped easily
Application
• For measuring hot water up to 180°C
in pressure rate PN 16
• For measuring hot water up to 200°C
in pressure rate PN 40
• For special applications in power plants
Available Designs
Size 40 50 65 80 100
Temperature in °C 200 180 200 180 200 180 200 180 200
Pressure in bar 40 16 40 16 40 16 40 16 40
Body material GS 45 GG 25 GS 45 GG 25 GS 45 GG 25 GS 45 GG 25 GS 45
Order No. Meter cpl. 826040 826338 825961 826340 826003 826342 825963 826344 825965
Order No. Meas. insert 826044 826346 825955 826348 826001 826350 825957 826352 825959
Installation requirements Installation
• Unrestricted straight pipe 3 x DN
• No restrictions directly behind the meter
2. Sensus Metering Systems GmbH
Hannover D-30880 Laatzen • Meineckestraße 10
Weitere Informationen unter http://www.sensus.com/esaap
LB 5800 INT • Page 2 of 3 08/2006
Performance table COSMOS WS 180 / 200 °C
Size of meter DN 40 50 65 80 100
Maximum peak flow (few minutes) Qmax m³/h 20 25 50 70 100
Continuous flow Qn m³/h 10 15 25 40 60
Transitional flow ± 2% Qt m³/h 2.25 2.25 3.75 6.00 9.00
Minimum flow Qmin m³/h 0.70 0.70 1.10 1.60 2.40
Starting flow m³/h 0.25 0.25 0.35 0.35 0.40
Pulse Values
Pulser Type Pulse Value
K 02
0,25 and 0,1 m³
or
0.25 and 0.025 m³ (special register)
K 06, K 10 0.001 m³
K 05, K 09 0.01 m³
Dial
Typical accuracy curve Typical head loss curve
Smallest Reading
m³
Max. Reading
m³
0.001 m³ 1 000 000
DN
40DN
50
DN
65
DN
80
DN
100
m h
+
-
Error
Qmax = max. flow
Qn = nominal flow
Qt = transitional flow
Qmin = min. flow
3. Dimensions
Size of meter DN 40 50 65 80 100
Overall length L mm 300 270 300 300 360
Height H
h
g
mm
mm
mm
195
80
325
195
80
325
205
100
345
205
100
345
235
110
385
Width B mm 170 170 200 200 260
Dimension picture
Weights
200°C PN 40
00108560504NDeziS
7.256.724.527.910.02gkreteM
2.4gktresnI 4.2 4.4 4.4 13.2
180°C PN 16
001085605NDeziS
7.237.917.717.31gkreteM
7.77.27.27.2gktresnI
Elder Road St Johns Industrial Estate Lees
Oldham Lancashire OL4 3DZ
Tel: 0161 622 0777 Fax: 0161 622 0707
sales@stream-measurement.com www.stream-measurement.com
Flowmeters, Systems & Calibration Services