An overview of on machine probing, what it is, why you would want to use it, discuss how this works in nx cam and shows a demonstration of how this works.
By Matt Beisel, Application Engineer, Swoosh Technologies
Ride the Storm: Navigating Through Unstable Periods / Katerina Rudko (Belka G...
NX CAM On Machine Probing
1. Click to edit Master title style
On Machine Probing in NX 9 CAM
Matt Beisel, Application Engineer, Swoosh Technologies
2. Click to edit Master title style
What is On Machine Probing?
Why do we want to use it?
How does this work in NX?
How does this work on the
machine tool?
Resources
Agenda
3. Click to edit Master title style
On Machine Measurement
technique
Probe may be 2d or 3d
Ruby stylus
Probe contacts part and records
position
Positional data may be used later
What is On Machine Probing?
4. Click to edit Master title style
Avoid use of additional CMM’s
Increase machine tool accuracy
Ability to buy off part while still fixtured in the machine
Easily obtain spc data
Reduce Gage tooling cost
Faster than traditional measurement and reduces human
error
Why do we want to use it?
5. Click to edit Master title style
Renishaw Probing hardware installed on machine
Renishaw Inspection Plus Macros
NX CAM MACH package 9.0 or higher with
supported post
NX CAM on machine probing is supported for both
Fanuc and Siemens Sinumerik controllers
What do I need to use it?
6. Click to edit Master title style
In NX for Manufacturing
you create an operation
and select the type as
probing
How does this work in NX?
7. Click to edit Master title style
Select or create
probing tool from the
tooling library
How does this work in NX?(ctd)
8. Click to edit Master title style
Select the features or points
you would like to measure
How does this work in NX?
9. Click to edit Master title style
Create a machine control
event to tell the control
what you want to do with it
Post out some code!
How does this work in NX?(ctd)
10. Click to edit Master title styleDemo
Click here to view the video on YouTube.
11. Click to edit Master title styleThankYou!
Swoosh Technologies:
Phone: (314) 549-8110
Fax: (636) 778-9188
www.SwooshTech.com
Notas do Editor
Hello,My name is Matt Beisel from SwooshTechnologiesYour Authorized NX CAM providerToday I will be showing you on Machine Probing in NX 9 CAM
AgendaWhat is On Machine Probing?Why do we want to use it?How does this work in NX?How does this work on the machine tool?Resources
What is On Machine ProbingOn machine probing is a measurement technique used on machine tools to use while your part is still in process on the machineThe machine will use a 2D or 3D probe similar to those found on some CMM’s. The end of the probe sensor that comes into contact with the part is made of hard non-marring material for metals such as ruby’s The probe will contact the part and record machine position when the probe sensor is triggered. Probe positions are recorded on the controller and the probe point positions may be processed directly after the points are taken or later to obtain meaningful data from the points. The meaningful data can the be relayed to the operator, quality system or back to the for adaptive part processing.Machine tool probes may be obtained Renishaw or other manufacturers.
Avoid use of additional CMM’sIncrease machine tool accuracyAbility to buy off part while still fixtured in the machineEasily obtain spc dataReduce Gage tooling costFaster than traditional measurement and reduces human error
