A quick Introduction to IoT in a Nutshell V

1. Chapter 7
IoT Physical Devices and Endpoints

2. Outline
• Basic building blocks of an IoT device
• Exemplary device: Raspberry Pi
• Raspberry Pi interfaces
• Programming Raspberry Pi with Python
• Other IoT devices

3. What is an IoT Device?
• A "Thing" in Internet of Things (IoT) can be any object that has a
unique identifier and which can send/receive data (including user
data) over a network (e.g., smart phone, smart TV, computer,
refrigerator, car, etc. ).
• IoT devices are connected to the Internet and send information
about themselves or about their surroundings (e.g., information
sensed by the connected sensors) over a network (to other devices or
servers/storage) or allow actuation upon the physical
entities/environment around them remotely.

4. IoT Device – Examples
• A home automation device that allows remote monitoring of the
status of appliances and controlling of appliances.
• An industrial machine which sends information about its operation
and health monitoring data to a server.
• A car which sends information about its location to a cloud-based
service.
• A wireless-enabled wearable device that measures data about a
person such as the number of steps walked and sends the data to a
cloud-based service.

5. Basic Building Blocks of an IoT Device
• Sensing
• Sensors can be either on-board the IoT device or attached to the device.
• Actuation
• IoT devices can have various types of actuators attached that allow actions to
be performed upon the physical entities in the vicinity of the device.
• Communication
• Communication modules are responsible for sending the collected data to
other devices or cloud-based servers/storage and receiving data from other
devices and commands from remote applications.
• Analysis and Processing
• Analysis and processing modules are responsible for making sense of the
collected data.

6. Block Diagram of an IoT Device

7. Exemplary Device: Raspberry Pi
• Raspberry Pi is a low-cost mini-computer with the physical size of a
credit card.
• Raspberry Pi runs various flavors of Linux and can perform almost all
the tasks that a normal desktop computer can do.
• Raspberry Pi also allows interfacing sensors and actuators through the
general purpose I/O pins.
• Since Raspberry Pi runs the Linux operating system, it supports
Python "out of the box".

8. Exemplary Device: Raspberry Pi
• Raspberry Pi is a low-cost mini-computer with the physical size of a
credit card.
• Raspberry Pi runs various flavors of Linux and can perform almost all
tasks that a normal desktop computer can do.
• Raspberry Pi also allows interfacing sensors and actuators through
the general purpose I/O pins.
• Since Raspberry Pi runs Linux operating system, it supports Python
"out of the box".

9. Raspberry Pi

10. Linux on Raspberry Pi
• Raspbian
• Raspbian Linux is a Debian Wheezy port optimized for Raspberry Pi.
• Arch
• Arch is an Arch Linux port for AMD devices.
• Pidora
• Pidora Linux is a Fedora Linux optimized for Raspberry Pi.
• RaspBMC
• RaspBMC is an XBMC media-center distribution for Raspberry Pi.
• OpenELEC
• OpenELEC is a fast and user-friendly XBMC media-center distribution.
• RISC OS
• RISC OS is a very fast and compact operating system.

11. Raspberry Pi GPIO

12. Raspberry Pi Interfaces
• Serial
• The serial interface on Raspberry Pi has receive (Rx) and transmit (Tx) pins
for communication with serial peripherals.
• SPI
• Serial Peripheral Interface (SPI) is a synchronous serial data protocol used
for communicating with one or more peripheral devices.
• I2C
• The I2C interface pins on Raspberry Pi allow you to connect hardware
modules. I2C interface allows synchronous data transfer with just two pins –
SDA (data line) and SCL (clock line).

13. Raspberry Pi Example:
Interfacing LED and Switch with Raspberry Pi
from time import sleep
import RPi.GPIO as GPIO
GPIO.setmode(GPIO.BCM)
#Switch Pin
GPIO.setup(25, GPIO.IN)
#LED Pin
GPIO.setup(18, GPIO.OUT)
state=false
def toggleLED(pin):
state = not state
GPIO.output(pin, state)
while True:
try:
if (GPIO.input(25) == True):
toggleLED(pin)
sleep(.01)
except KeyboardInterrupt:
exit()

14. Other Devices
• pcDuino
• BeagleBone Black
• CubieBoard