1. Name: Sayan Tuleshov
Date of Birth: 24/01/1977
Nationality: Kazakhstan
Status: Married
Mobile (сell): +7 701 493 47 53
E-mail: tuleshovsayan@gmail.com
sayantuleshev@mail.ru
Address: Atyrau, Tovarisheskaya str 1’b’
Employment:
2016-15 March-Halliburton Russia ,Yuzhno Sakhalinsk
Under general supervision, performs the rigging up and down of Service Tools
service line equipment on work locations for the purpose of providing drillable and
retrievable tools for use in pressure control, plug and abandon, treating, and
squeeze operations. Performs as a one-man service crew. Routinely works in more
than one type of well site (off or onshore) as assigned by Service Coordinator.
Coordinates and oversees Service Tools PSL (i.e., packers) functions at the well
site. Responsible for operating Service Tools equipment at the customer location
to include but are not limited to: Squeeze jobs, plug jobs, negative tests,
Subsurface Control Valve (SSCV) I, Squeeze Manifold. b) Easy-Sliding Valve Brash
(EZ-SVB) run on wire-line and drill-pipe. c) RTTS Packer and By-pass. e) Fas-Drill
Packer run on wire-line and drill-pipe. f) Indicating Ball Catcher and Indicating
Latch Down Plug Catcher and g) Jars. Help train service operators in areas of
expertise. Monitor instruments and perform necessary calculations to assure
quality of data/job. Consults with customers concerning services and products,
and promotes good customer relations at the well site, and assures customer

2. satisfaction with results. Properly maintains assigned equipment and monitors
compliance with safety regulations and procedures. Job tasks, correctly
performed, impact indirectly on cost containment, efficiency, profitability or
operations. Consequences of error are easily measured and can be confined. Skills
typically acquired through completion of high school diploma or similar education.
Have successfully passed company tests or met task guideline requirements.
Ability to demonstrate to pressure test equipment safely and interpret Tool
Engineering Drawings is required. Able to perform job per the following criteria: a)
Ability to conduct pre-job toolbox safety meeting b) Ability to review and verify job
plan with customer representative and manage any changes required c) Check and
verify equipment as per job plan d) Ability to perform job unassisted e) Ability to
complete all job documentation, for example: Job Ticket, Job History Report, End
of Job Customer Survey (EJCS)/Key Performance Indicator (KPI), Job Log, Job
Summary etc., and f) Demonstrate understand of down hole hydraulics, including
basic job calculations.
2012 -18 August 2015 Halliburton PRL International Inc. Basra, Iraq
• Working as TCP (tubing conveyed perforating) Oilfield Service Specialist II
• Responsible & manage all TCP gun loading procedures, maintenance of TCP
tools, make calculations gun strings, load Different Models Firing head(
Model-I,II,III,TDF, Multi-action FH, Drop Ball,e.t.c
• Work in charge as TCP Supervisor on different rigs in Iraq field: Onshore
Exxon West Qurna, ENI Zubair, Shell Majnoon, PETRONAS, and Gazprom BP
Rumaila
• Type of Perforation: Shoot and pool, With DST, Testing: Correlation by Wire
line,
Space out-Space in etc. Loading all types JRC system guns, DYNA well Guns (2
7/8,3 3/8, 4 5/8, 7) All types Of Schlumberger Guns
• Improve Quality of Job for Gun loading and Rig site Job, Upload on-line ORION
systems, Preparation Job procedures, Involved customer Meetings, Full
understanding and explain all TCP, Completion , testing procedure for Customer
and crew, Prepare Programs step by step for each Jobs , Complete Service Report,
prepare and sign Job tickets for Customer
• Improve Sound of Work in TCP Crew, Ingress Team Work responsibility,
hardworking
• Give Good Knowledge, skills/ability for Locals guys, who working in TCP
team/Wireline/DST Design TCP Assemblies and procedures Best Suited for
Customer Needs, Order required TCP equipment
Equipment Testing and Setup for jobs, Involved well testing jobs
Calculate Downhole Pressures and Firing Head Safety Factors
Execute job at Well site, RIH & POOH Completion tools, set(upset) Packers
Customer Service and Support, Equipment Presentations for Customers
Train Operator and Operator assistants, rate competences, Ensure safety
procedures are being followed

3. 2012 March-2012 June: Schlumberger Kazakhstan
• Working as Field Specialist-I for EUG, KazMunaiGaz, Aktobe Munai, Create Wall
SNPC, Petrom
• Type of Perforation: Shoot and pool, With DST, Testing: Correlation by Wire line,
Space out-Space in etc. Also Involved in Testing Team Rig up ,Rig Down , testing
Full and good understanding Well test Procedure
2004/11-March 2012 Halliburton International Inc. Kazakhstan
• Working as TCP (tubing conveyed perforating) Oilfield Service Specialist I
• Responsible & manage all TCP gun loading procedures, maintenance of TCP
tools, make calculations gun strings
• Offshore TCP Auto latch deployment system (Agip KCO project)
• Offshore T-47, Sunkar, Aktau Gun shop (loading, unloading guns), Onshore
Baku(Gobustan) British Petroleum Project
•Also Was involved In Slick Line operation In Kashagan Project during 2 years for
A-Island and D-block for Rigging UP/Rig down, included other types services and
Night Supervision
Job description: A qualified Field Specialist with strong experience in Tubing
Conveyed Perforation (TCP). Hard-working, self-motivated and works well under
pressure to achieve company objectives. An effective communicator at all levels
within an organization. As Supervision, manage TCP team operators, provided
support and work in the work shop by preparing the tools and equipment used in
the Tubing Conveyed Perforating and Perforating on Coil Tubing services line
operations during the completion phase of a well in team. The role introduces
Tubing Conveyed Perforating operation and services .which includes an
introduction into handling and using explosives according regulatory guidelines.1)
Preparing and maintain equipment’s in workshop for shipping for next job.2)Job
preparation for the rig up, rig down for a job.3)Maintaining and operation auxiliary
TCP support equipments.4)fill in Journey Management ,Job Safety
Analyses(JSA),Permit to Work System(PWS) .Toolbox Meeting, Hoc Card System
.5)Load ,Unload Guns with explosive charges, redress TCP tools, auto latch
sharable connecting system . 6) Calculation Customer Intervals Of Perforations,
Shear pins Firing Heads.7) Organization Transportation Request Form (TRF) for
Explosives, Gun baskets etc.8) Work with Government GosTechNadzor, Police.8)
Pass I-learn courses, computer skills etc.9)Power of attorney in –fact to do in name
and behalf of Branch all such acts and things with respect to receiving, transferring
and transportation of explosive materials stored in temporary storage bunker and
back.10)Monthly Inventory all TCP tools, equipment, explosives in
bunker.11)Organization MPI test for all lifting, handling tools(Baskets, Containers,
tandems, auto latches, lifting subs etc. Document keeping and control RoK
legislations are followed.
Under general supervision, routinely works in more than one type of
well site and base camp as assigned by Service Coordinator.
Coordinates and oversees Tubing Conveyed Perforating (TCP) PSL
functions at the well site and base camp. Provides the planning

4. necessary for the job including equipment set up, well site direction,
and customer-related support activities. Responsible for the activities
relative to maintaining, setting up, testing, and operating equipment
at the customer location and field camp. Promotes and takes an active
part in the Quality Improvement Process. Ensures compliance with
HSE regulations and guidelines. Promotes safety awareness and
environmental consciousness, and complies with all applicable safety
and environmental procedures and regulations. May help train service
operators in areas of expertise. May monitor instruments and perform
necessary calculations to assure quality of data/job. Consults with
customers concerning services and products, promotes good customer
relations at the well site, and assures customer satisfaction with
results. Properly maintains assigned equipment and monitors
compliance with safety regulations and procedures. Confer with
Service Coordinator on major decisions. Job tasks, correctly
performed, impact indirectly on cost containment, efficiency,
profitability or operations. Consequences of error are easily measured
and can be confined.
1999 – 2002 “Vegyepszer” Company, Tengiz
* Basic knowledge of the processes used to plan maintenance equipment, such as
Tool (maintenance to ensure reliability) AHPO (analysis of the nature and
consequences of failure) (optional). Ability to prepare detailed procedures for
maintenance (scheduled and regular repairs) of static and rotating equipment.
Ability to plan and organize the execution of works, define their priorities based on
available project documents and work schedules. Good communication skills -
both written and oral. A good level of English The ability to effectively communicate
with specialists from other departments, Procurement Division, independent
companies responsible for engineering support of projects. The ability to listen and
understand cow-workers. The ability to make high-quality handover reports, speak
and exchange information at the meetings. Experience in service for at least
several types of the following equipment: All types of conventional process pumps.
Valves, Safety Valves (PSV), Centrifugal compressors, Conveyors and other
equipment involved in the factory processes, Gas Turbines, Steam heat recovery
systems (HRSG), Steam Turbines, The total process equipment
Training Summary:
May 2005 TCP-1 Gun Loading Training School, Nizhnevartovsk, Russian
Federation
.Explosives user training / TCP gun loading training (passed
score 89%)
March 2005 First Aid Training, SOS, Aktau, Kazakhstan. Forklift License
.BLASTER KZ LICENSE (RED BOOK)

5. Jan 2014-17 Agip KCO HSE Induction, ATYRAU, KZ, H2S, BOSIET (Baku)
December 2006 TCP-2 Firing Heads (TDF, APFC, etc.) shear pin calculations.
USA, TEXAS, Carrolton Training Center (passed score 99%)
November 2009 TCP-3 TEXAS, Carrolton Training Center (Presentation)
2004-2012 : Explosive course (Kazakhstan) Blaster
Education:
2002 – 2005 Oil and Gas Institute, Atyrau, Kazakhstan
Oil and Gas Wells Drilling Facility
Specialty: Mountains Mechanic- Engineer
1994 – 1998 Atyrau State University, Atyrau, Kazakhstan
Physics and Mathematics
Specialty: Physic and Mathematic
OTHER INFORMATION: Drive License B, C, Forklift license. Blaster KZ license
(RED BOOK) and Valid Azerbaijan Blaster, PTW BP, ENI
Languages: English, Kazakh, Russian
Computer Skills: Microsoft Office, Internet
Personal Information: Hardworking, communicative, good knowledge TCP (tubing
conveyed perforating) job