MRO Catalogue - 2016 (2) (1)

Speciality Coatings l Cold Repair Compounds l Emergency Repair Kit l Industrial Aerosols l Electrical Maintance
Rust Management l Foam & Sealants l Conveyor Belt Repair l Anaerobic Adhesives

Since its inception in 1959, Pidilite Industries Limited has been a pioneer in
consumer and speciality chemicals in India.
Pidilite Industries is the market leader in adhesives and sealants,
construction chemicals, hobby colours and polymer emulsions in India.
Our brand name Fevicol has become synonymous with adhesives to
millions in India and is ranked amongst the most trusted brands in India.
Pidilite is also growing it’s International presence through acquisitions and
setting up manufacturing facilities and sales offices in important regions
around the world. Fevicol is now the largest selling adhesives brand in Asia.
Our product range includes Adhesives and Sealants, Construction and
Paint Chemicals, Automotive Chemicals, Art Materials, Industrial Adhesives,
Industrial and Textile Resins and Organic Pigments and Preparations.
Most of the products have been developed through strong in-house R&D.
TM

02 Speciality Coatings
05 Cold Repair Compounds
11 Industrial Aerosols
19 Rust Management
21 Foam & Sealants
25 Anaerobic Adhesives
33 Additional Product
Index

SPECIALITY COATINGS
CYCLO composite speciality coatings are quality products used for various Industrial applications of
surface protection, rust prevention. CYCLO composite coatings exhibit excellent chemi cal resistance
to variety of chemicals. Cyclo speciality composite products are engineered for high mechanical
strength and resistant to organic solvents.
Product Name CYCLO 101
HIGH BUILD EPOXY COATING
Description CYCLO 101 is a two component solvent-less, High Build Epoxy
protective coating, designed to combat corrosive conditions in
tanks, wells, structural members and fluid transfer systems.
Salient Features • Epoxy resin base - Excellent adhesion to a variety of substrates
• High Dielectric strength
• High Breakdown voltage
• Self Leveling
• Non-sagging
• Safe for use in potable water situations
• Anti-Algae - Stops algae growth.
• Non toxic. Passes Global Migration test.
Approvals/ ELECTRICAL INSULATION
Certificates ERDA Tested : Electrical Strength: IS 2584-1963:
BDV > 30 KV
CORROSION RESISTANCE TEST
Salt Spray Test ASTM B117 : Passes >3000 hrs
FOOD GRADE TEST
US FDA 175.300 : Global Migration Test : Passes.
Product Profile
Mixing Ratio 2 parts Component-A to 1 part component-B. ( A: B ::2:1 w/w. )
Appearance of Mix White Viscous liquid
Specific Gravity
of Mix
1.4 ± 0.02
Non Volatile Matter 100%
Heat Deflection 60°C approx
Temperature
Pot life 35 - 40 minutes
Set Time 6 hours @ 30°C
Full Cure Achieved within 5 days @ 30°C
Coverage 0.7 kg/m² @ 500 micron (DFT)
Application Areas
Protection of concrete, steel and timber from corrosive effects.
Dielectric Flooring, Electrical insulator ends, Metal support structures, bushings and
potheads where sufficient insulation obtained to guard against animal caused flashovers,
Waste Water Plants, Hydrogen Sulfide rich WWTP & Potable Water, structural steel work,
Drinking Water Systems, Pipelines & Valves, Cooling Towers, Ducting Systems, Process Tanks
& Vessels, Seawater Cooling Systems. Pipe work, pumps and other miscellaneous fluid
transfer fittings, liquid storage facilities, processing tanks, structural steel work, dam walls
and air conditioning ductings.
Packing
Resin Part 1 kg, 4 kg & 16 kg
Hardener Part 0.5 kg, 2kg & 8 kg
Storage Store in cool and dry condition. Away from sunlight
and direct heat.
Shelf Life 2 Yrs Minimum.
Water Clarifier Tanks
Dielectric Insulation Flooring
Effluent Treatment Plant
Chemical Storage Tanks

3
Chemical Storage Tank
Metal Strucutures Exposed to ACID FUMES
Concrete Foundation exposed
to Chemical Spillage
CHEMICAL RESISTANT COATING
Description CYCLO 201 is a two component high-build epoxy system
designed for ultimate chemical resistance with high
performance Epoxy Novolac resin technology.
Salient Features • Superior Novolac polymer system
• Outstanding resistance to chemicals & acids
• Free of all solvents - zero VOC
• Highly erosion resistant
Product Profile
Mixing Ratio 2 parts Component-A to 1 part component-B. ( A: B ::2:1 w/w. )
Appearance of Mix Avery color, Viscous liquid
Specific Gravity of Mix 1.4 ± 0.02
Non Volatile Matter 100%
Heat Deflection
Temperature
60°C approx
Pot life 25 - 40 minutes
Set Time 3 hours @ 30°C
Full Cure Achieved within 5 days @ 30°C
Coverage 0.7 kg/m² @ 500 micron (DFT)
Typical Cured Properties
Compressive strength ASTM D695, Mpa - >88
Tensile strength ASTM D638, Mpa - >19
Flexural strength ASTM D790, Mpa - >47
Shore D, Hardness - >70
Dielectric constant ASTM D150 (150KHz - 4.8
Max exposure temperature : Dry condition - 120°C, Wet condition - 70°C
Thin Film Gel, (min recoat time) Minutes - 75
Chemical Resistance
Tested at 30o
C, Samples cured for 10 days at 30o
C.
Post curing at elevated temperatures ( 40-50o
C) will improve chemical resistance.
1 = Continuous or long term immersion, 2 = Short term immersion
3 = Splash and spills, 4 = Avoid contact
Ammonium Chloride - Hydrochloric Acid : 5 % - Beer - Hydrochloric Acid, 10 % -
Hydrochloric Acid, conc - Diesel Fuel - Isopropyl Alcohol - Kerosene - Phosphoric
Acid, 5 % - Petrol - Phosphoric Acid, 20 % - Salt Water - Sulfuric Acid, 20 % - Sewage
- Sulfuric Acid, 75 % - Skydrol - Sodium Cyanide - Sodium Hydroxide,50% - Potassium
Hydroxide,5% - Potassium Hydroxide, 20 % - Vinegar - Sodium Hydroxide, 20 % - Wine
- Ammonium Hydroxide, 20 % - Sodium Hypochlorite - Ammonium Hydroxide, 50 %
1
Acetic Acid, 10 % - Acetone - Acetic Acid, Glacial - Nitric Acid, 5 % - Nitric Acid, 10 % -
Sulfuric Acid, 98 % - Xylene - Trichloroethane - Toluene
2
Dichloromethane 3
Application Areas
Acid Bunds, Tanks & Vessels, Rail Cars, Scrubbers, Steelwork Coating, Pipelines & Valves,
Solvent Extraction, Acid Sumps & Drains systems, Ducting Systems, Acid Fume proof
roofing, Sulfur Pits, Concrete Protection
Packing
Resin Part 1 kg, 4 kg & 16 kg
Hardener Part 0.5 kg, 2 kg & 8 kg
Storage Store in cool and dry condition. Away from sunlight
and direct heat.
Equipments Handling Chemicals

Pump Impeller
Pump Casing
Pump Casing
Heat Exchanger
ABRASION RESISTANT COATING
Description CYCLO 411 is two component Brushable Ceramic grey epoxy
protective coating system designed for high abrasion resistant
under dry service conditions & temperature upto 1200
C
Salient Features • Abrasion and Corrosion resistant under high turbulence.
• Superior finished smooth surface
• Ceramic and silicon carbide filled - provides maximum
protection
• Smooth brushable consistency
• Reduces downtime
• Excellent adhesion to metals.
Product Profile
Technology Epoxy Composite
Application Coating
Appearance - Mixture Grey flowable liquid
Components Two Component.
Mix Ratio, Resin: Hardener :: 4.75 : 1 w/w and 2.75 : 1 v/v
Cure Room temperature
Coverage of Mixture 1.2 m² @ 0.5 mm thick/1 kg
Density of Mix @ 30°C 1.30-1.40
Viscosity, @ 30°C,
BF, Spindle 7
30000 cps
Typical Curing Performance
Pot life @ 30°C 25-50 minutes
Functional Cure Time
@ 30°C
6 hrs
Full cure time @ 30°C 24 hrs
Typical Properties of Cured Material
Abrasion Resistance, ASTM D4060 CS10
Wheel, Load 1kg, Loss in mgs
12 mg
Lap Shear Strength ( Grit Blasted Mild
Steel, Cured for 7 days @ RT ISO 4587 )
13.9 N/mm²
Shore D, Hardness ISO 868 85
Compressive Strength, ISO 604 66.81 N/mm²
Compressive Modulus, ISO 604 14135 N/mm²
Tensile Strength, ISO 527-2, 43.63 N/mm²
Tensile Modulus, ISO 527-2, 5587 N/mm²
Flexural Strength ASTM D790, 134 N/mm²
Flexural Modulus, ASTM D790, 13815 N/mm²
Applications
Repairing heat exchangers and condensers, Tank linings and chutes, Resurfacing
and repairing rudders and pintel housings, Repairing of cooling pump impellers,
Butterfly valves
Packing 2 KG Set
Staorage Store in cool and dry condition. Away from sunlight
and direct heat.

5
COLD REPAIR COMPOUNDS
Cyclo™ Cold Repair Composite Compounds are engineered for high mechanical strength under
seviour conditions used for various Industrial applications such as emergency leakages, surface
protection, rust prevention, excellent resistance to a variety of chemicals and organic solvents.
Transformer Oil Flange
Pipe and Joint Elbow
Production Valve Leakage
Steam Leakages
RAPID STEEL PUTTY
Description CYCLO 301 Rapid Steel Putty is a room temperature cure
steel reinforced two-part epoxy repair putty cures rapidly,
facscilitating to emergency repairs to various metals. Cured
putty withstands to an operating range of temperature
-30°C to 100°C.
Salient Features • Cures rapidly in 5 minutes at room temperature
- Saves downtime.
• Non Sag, No Shrink
• Cures to metal luster finish
• Excellent adhesion to metals like steel, cast iron, stainless
steel, concrete, copper, aluminium, and bonze.
Product Profile
Application Industrial Maintenance
Appearance Steel Paste
Components Two Component- Mixing
Mix Ratio Resin : Hardener
By Volume 1:1
By Weight 100:56
Coverage on mixing 800 cm² @ 6 mm thick per 1 kg kit
Operating Temperature -30°C to 100°C
Gel Time @ 30°C 3 to 4 minutes
Working Life 3 to 4 minutes
Cure Time @ 30°C, 10 minutes
Full cure time @ 30°C, 24 hrs
Abrasion Resistance, ASTM D4060, wheel CS10, Load 1kg, Loss in mg - 87 mg
Lap Shear Strength Grit Blasted Mild Steel , ISO 4587 - 12.5 N/mm²
Shore D, Hardness (ISO 868) - 82
Glass Transition Temperature ISO 11359-2, - 67°C
Compressive Strength, ASTM D604 - 64 N/mm²
Compressive Modulus, ASTM D604 - 5816 N/mm²
Tensile Strength, ISO 527-2 - 24 N/mm²
Tensile Modulus, ISO 527-2 - 11387 N/mm²
Flexural Strength ASTM D790 - 71 N/mm²
Flexural Modulus ASTM D790 - 6630 N/mm²
Application Areas
Emergency leakages repair of BF water cooling jacket, Arresting oil leakage in transformer
and gear box, Pipe line & elbows, Filling of pitting holes & stripped threads.
Packing 1 KG KIT, Part A: 640 Gms, Part B: 360 Gms
Storage Store both unopened containers in a cool, dry area, away from
heat and direct sunlight. Warm compound will severely reduce
the pot life.

PREMIUM METAL PUTTY
Description CYCLO 311 Premium Metal Putty is a two-part Ferro-silicon filled
epoxy resin system, engineered to highly machinable and good
corrosion resistance to mild chemical attack. Designed to work
under service temperature of -30°C to 120°C.
Salient Features • Contains no iron or steel fillers. Corrosion is eliminated due
to high Ferro-silicon content during service time.
• Epoxy resin base - Excellent adhesion to steel, and cast iron.
• Superior machining finished surface
• Tolerance- Facilitates fine tolerance limits
• Excellent resistance to a variety of chemicals.
Product Profile
Appearance (Mix) Grey paste
Components Two Component- Mixing
Mix Ratio Resin : Hardener
4:1 by volume and 7:1 by weight
Density @ 30°C 1.5-1.7 g/ml
Coverage 575 cm² @ 6 mm thickness per 1 kg kit
Operating Temperature -30°C to 120°C
Curing Properties
Gel time @ 30°C 25-30 minutes
Working Life 25-35 minutes
Functional Cure Time 6 hours @ 30°C,
Full cure time @ 30°C, 24 hours
Abrasion Resistance, ASTM D4060, wheel CS10, Load 1kg, Loss in mg 104 mg
Lap Shear Strength Grit Blasted Mild Steel, ISO 4587 11.5 N/mm²
Shore D, Hardness 80 minimum
Glass Transition Temperature ISO 11359-2, 63 °C
Compressive Strength, ASTM D604 100 N/mm²
Compressive Modulus, ASTM D604 9554 N/mm²
Tensile Strength, ISO 527-2 27 N/mm²
Tensile Modulus, ISO 527-2 4560 N/mm²
Flexural Strength ASTM D790 54 N/mm²
Flexural Modulus ASTM D790 10540 N/mm²
Application Areas
Restoring tolerance to worn shafts, Bearing seats and housings, Motor end covers,
Repairing worn Key ways, Thinned pipes, tubes sections, Engine blocks & Bearing housings,
Pump casings and impeller, Rebuilding of water, coal slurry pump casings
Packing 1 kg KIT
Part A: 875 Gms
Part B: 125 Gms
Storage Store both unopened containers in a cool,
dry area, away from heat and direct sunlight.
Warm compound will severely reduce the
pot life.
Motor End Cover
Motor End Housing
Cam Shaft of a Turbo Diesel Engine
Motor Shaft

7
Product Name M Seal Steel Putty
Description Two component room temperature cure , easy-to-use epoxy
putty in the form of a co-extruded cocentric stick. M-SEAL
STEEL PUTTY is useful to seal, grip, join and insulate a variety
of surfaces like ferrous and non-ferrous metals, etc. On curing,
exhibits tough and long lasting bond. Cured product is resistant
to moisture, heat, mild acids and alkalis.
Salient Features • Cures in 10 to 20 minutes at room temperature.
• Co-centric Stick - Convenient to use,
cut required quantity & use.
• Best for salty and humid environments, heat resistant
up to 120°C
• Cured product can be drilled, filed, tapped, machined,
cut and then painted.
Product Profile
Application Seal, Repairs and Maintenance
Appearance - Mixture Grey Putty
Mix Ratio, Resin:Hardener :: 1:1 w/w and 1:1 v/v
Processing Time @ 30°C 4 minutes
TENSILE STRENGTH > 200 Kg/cm²
COMPRESSIVE STRENGTH > 400 Kg/cm²
Flexural Strength
ASTM D790,
> 350 Kg/cm²
Shore D, Hardness
ISO 868
> 75
IMPACT STRENGTH
( Un-notched)
> 3.0 Kg.cm/cm²
OVERLAP SHEAR
STRENGTH
( M.S.to M.S.)
> 50 Kg/cm²
DI-ELECTRIC STRENGTH
at R.T.
> 10 KV/mm
WATER ABSORPTION < 0.5 %
Application Areas
Sealing of leakage/cracks in metal fabrications, industrial vessels, boilers, hulls of ships,
boats and trawlers.
Sealing water supply mains, storage tanks, concrete sewer pipes, heat exchanger coils etc.
Sealing blowholes, cracks, and leakage in ferrous and non-ferrous casting, pumps and
mould boxes etc.
Sealing holes/cracks in wooden and metal patterns.
Repairing of damaged internal threads of various types of machine pumps. Sealing cracks
in casings of meters/gear-box etc.
Packing 114 gm Co-Centric Stick.
Storage Store in a cool (< 25 0C) and dry place. Away from sunlight and
direct heat.
Shelf Life Minimum 12 months in sealed unopened packs.
Central Air Conditioning Systems
Heat Exchanger
Condenser Fins
Bolts on Flanged Connection
Water Leak at Stem Valve

Product Name EPIGEN 806 BR
BRUSHABLE ABRASION RESISTANT COATING
Description A two component, brushable compound containing fine
ceramic particles to combat abrasive conditions in a broad range
of applications. It has high abrasion resistance under dry service
conditions upto 1250
C. Product provides additional benefits in
the form of superior adhesive strength, high corrosive resistance
and excellent mechanical properties and adhering strongly to
suitably treated metal, concrete and other substances.
Salient Features • Abrasion and Corrosion resistant under high turbulence.
• Possess excellent wear resistance.
• Composite comprises graded sintered ceramic of
extreme hardness and has smooth brushable consistency
• Excellent adhesion to metals.
Product Profile
Application Coating
Appearance - Mixture Dark Grey Brushable coating
Mix Ratio, 1 kg Component“A”to 1 kg Component“B”
Coverage of Mixture 18.0 kg /m2 @ 10mm
Density of Mix @ 300
C 1.8
Pot life @ 30°C 35 minutes
Thin Film Set time @
1mm thickness, @ 30°C
4 hrs
Abrasion Resistance, ASTM D4060
CS10 Wheel, Load 1kg, Loss in mgs
12 mg
Shore D, Hardness ISO 868 >89
Compressive Strength, ASTM D695 >70 Mpa
Tensile Strength, ASTM D638 29 Mpa
Flexural Strength ASTM D790, 33 Mpa
Flexural Modulus, ASTM D790, 13815 N/mm²
Heat deflection temperature
ASTM D648
800
C
Elongation ASTM D638 0.80%
Thermal conductivity ATSM C177 0.6 Kcal/m.hr 0
C
Maximum exposure temperature, 125 0
C
Chemical Resistance Hydrochloric Acid: 10 %, Phosphoric Acid: 5
%, Ammonium Hydroxide: 20 %, Potassium
Hydroxide: 20 %, Sodium Hydroxide: 20 %,
Salt Water, Salt Water, Isopropyl Alcohol
Applications
Repairing heat exchangers and condensers
Tank linings and chutes, Agitator Shafts,Slurry Lines,Spiral Classifiers
Resurfacing and repairing rudders and pintel housings,
Repairing of cooling pump impellers & Butterfly valves
Packing 2 KG Set (Part A : 1 KG ; Part B: 1 KG)
Storage Store in cool and dry condition. Away from sunlight and direct
heat, below 300
C
Pump Valve
Pump Propeller and Rudder
Pipe Flanges Couplings & Valves of an Irrigation
Water Pumping Facility
Pump Impeller

9
Product Name EPIGEN XD001
HEAT & ABRASION RESISTANT CERAMIC COMPOSITE
Description A trowellable, high performance solventless, 2K polymer
composite containing graded ceramic particles in an epoxy
resin, has highest standards of elevated temperature service,
chemical resistance, and corrosion protection.
Salient Features • The polymer composite comprises medium grading of
sintered ceramic of extreme hardness
• Resistance to abrasion, where temp. may exceed 1500
C.
• Resistant to organic solvents
• Tough polymer with high adhesive strength
• Excellent resistance to sliding abrasion
Product Profile
Appearance Trowellable Paste
Components Two Component-Mixing
Mix Ratio by wieght 2 parts“A”to 1 part“B”
Coverage 20.0 kg per m2 @ 10mm
Max Temp Resistance 1500
C
Thin Film Gel @ 10 mm 180 Minutes
Thin Film Set @ 10 mm 240 Minutes
Thin Film Gel @ 20 mm 120 Minutes
Thin Film Set @ 20 mm 180 Minutes
Ambient cure time to Service @ 10 mm 36 Hours
Ambient cure time to Service @ 20 mm 24 Hours
Compressive strength, ASTM D695 >60 Mpa
Tensile strength, ASTM D638 >25 Mpa
Flexural strength, ASTM D790 >30 Mpa
Hardness, Shore D >90
Elongation, ASTM D638, % 0.1
Thermal conductivity, ASTM C177 0.6 Kcal/m.hro
C
Maximum exposure temperature *2400
C
Heat deflection temperature, ASTM D648 1500
C
* Thermal degradation temperature. This does not necessarily represent the ultimate
maximum permissable temperature.
Application Areas
Pipelines, Valves, Pumps & Impellors
Raw water Booster and other water handling pumps. Vertical pump casing bowl, diffuser,
suction and discharge. Split casing, centrifugal pump coated with XD001. Condenser end
plate and water box. Base coat for coal bend wear protection coating. Improves pump
efficiency by 3% in totality depending on the existing efficiency of pump.
Chemical Resistance
Continuous or long term immersion Hydrochloric Acid (conc) , Phosphoric Acid, 20 %,
Sulfuric Acid, 20 %, Ammonium Hydroxide, 20 %, Potassium Hydroxide, 20 %, Sodium
Hydroxide, 20 % , Sodium Hypochlorite, Xylene, Isopropyl Alcohol, Salt Water, Acetone
Packing 3 kg Set.
heat and direct sunlight, below 300
C. Warm compound will
severely reduce the pot life.
Wear Protection Coal Mill Body
Wear Protection Mill Bolt Head
Pump Casing
Sewage Water Pump

Product Name EPIGEN FC3
Description Epigen FC-3 is a two component, fibreglass filled epoxy
adhesive system which, when mixed according to instructions,
solidifies at room temperature to form a tough, infusible
material possessing good mechanical properties and adhering
strongly to suitably treated metal, wood, concrete, ceramic and
fibreglass surfaces.
Salient Features • Fast cure mechanism suitable for emergency repairs.
• Thixotropic nature allows application on vertical as well as
horizontal surfaces
• Fibreglass reinforcement allows bridging of large gaps or
holes in pipes, ducting etc.
Product Profile
Appearance Blue-green when mixed
Components Two component
Cure Room Temperature
Mix Ratio by wieght 2 parts Component 'A' to1 part Component 'B'
Max Temp Resistance 120°C
Pot life of Mix 5 - 10 minutes at 25°C
Tack free time 15 minutes at 25°C on 5mm section
Density of mix 1.3 g/cc
393 kgf/cm² (5600psi) > 200 Kg/cm²
DI-ELECTRIC STRENGTH
at R.T.
> 10 KV/mm
WATER ABSORPTION < 0.5 %
Application Areas
On-line leakage arresting for water, Oil, Gases & fuels. Arresting transformer oil lekage, Pipe
and duct repairs where minimum patching time is available. Can be used on vertical and
horizontal surfaces, Inclusion of chopped fibreglass reinforcement allows bridging of large
gaps or holes in pipes, ducting etc.
Packing 1.5 kg Set (Part A 1 kg ; Part B 0.5 kg)
heat and direct sunlight, below 300
C. Warm compound will
severely reduce the pot life.
Transformer Tank
Industrial Duct
Transformer Oil Tank
Water Leakages from Faucet

11
INDUSTRIAL AEROSOLS
Cyclo™ brand of professional quality products are used for various Industrial applications. They are
developed for special needs and requirements of various maintenance departments. The range
includes products for Electrical, Mechanical, surface protection and rust preventation applications.
Cyclo™ products are now widely used in MRO applications.
Product Name CYCLO QUICK DRY ELECTRONIC CLEANER
Description Quick Dry Electronic Cleaner is a fast drying formula leaves
no residue.
Salient Features • Fast Drying formula
• Leaves No Residue
• Precision Cleaner
• Plastic Safe
Technical Properties
Appearance Clear Liquid
Specific Gravity 0.7± 0.1
Propellent CO2
Application Areas
Removes dust, dirt, oil, grease, flux, and other grim from electronic printed circuit boards,
electronic parts, potentiometers, test instruments, rocker/push-pull switches, relays, circuit
breakers, transformers, switchgears, controll instruments, communication assemblies &
other sensitive electronic components.
Caution
Extremely Flammable. Do not use on Energized Equipment. Harmful if swallowed. Contents
under pressure.
Packing 500 ml (312 g)
Storage Store in cool area, away from direct heat & sunlight,
below 30°C. Do not keep aerosol can on car dashboard,
avoid exposure to sunlight.
Shelf Life Minimum 2 years.
Electronic Circuit Board
Circuit Breakers
Switches
Controll Instruments

Description CYCLO 88 is a heavy duty moisture displacer that lifts moisture
from surfaces through hydrophobic action thereby providing
moisture free systems (mechanical as well as electrical). It
penetrates and leaves a thin layer of lubricating oil that provides
lubrication as well as rust protection for upto 12 months to the
equipments.
Salient Features • Removes surface moisture effectively
• Leaves a thin oily film that provides effective lubrication
and rust protection.
• Non flammable
• Reduces electrical leakage and short circuits.
Typical Properties
Appearance Clear
Colour Light Ember
Specific Gravity 1.2 ± 0.1 (B ul k)
% Non - Volatiles > 20 ( Bu l k )
Odour Mild
Copper Strip Corrosion Negative
Propellant CO2
Application Areas
Electrical and mechanical equipments, motors, switches and switch gears, fuse boxes,
capacitors, transformers, connectors, ignition equipments, test instruments, rocker /
push-pull switches, relays, circuit breakers, transformers, switchgears, bus bars terminals,
generators, control instruments, communication assemblies, starters, solenoids etc
Caution
Contents under pressure do not puncture or incinerate.
Packing 400 ml (460 g) Ecofriendly Aerosol Spray can.
Storage Store in cool area, away from direct heat & sunlight, below 30°C.
Do not keep aerosol can on car dashboard, avoid exposure to
sunlight.
Ignition Equipments
Electronic Measurement Instrument
Pressure Transmitter
Electrical Measurement Instrument

13
Product Name CYCLO ONLINE SAFE CLEANER
Description A nonflammable, non residual, plastic safe“ON-LINE”
Cleaner formulated from selected blend of solvents that
removes moisture, oil, grease, waxy sludge, dirt or any other
contaminations effectively from Contact Surfaces.
Salient Features • Nonflammable and hence can be used“ON-LINE”
• Removes surface contamination, dirt, dust, waxy substrates,
oil, grease etc. from surfaces.
• Superior wetting properties for effective cleaning.
• Leaves no oily residues on the surface thereby avoiding the
process of rinsing or wiping etc.
• Non-conductive, Non-corrosive and Chemically Stable.
• Offers good resistance to moisture, dirt, dust, etc.
Appearance Liquid
Colour Transparent
Propellant CO2
Specific Gravity 1.3 ± 0.2
Flash Point None
Odour Faint
Copper Strip corrosion Negative
Di-electric strength 30 kV (min)
KB Value 55 (min)
Boiling Point (o
C) 70 (min)
Application Areas
Electrical connectors, switches, bus bars, sliding and rotary tuners, potentiometers, test
instruments, rocker / push-pull switches, relays, circuit breakers, transformers, switchgears,
bus bars terminals, motors, generators, control instruments, communication assemblies,
starters, solenoids, Capacitors, Fuse Boxes, Ignition systems etc. An ideal product for
cleaning of a component prior to application of anticorrosion coating, paint or any other
type of coatings.
Caution
Disconnect the electric supply before aerosol can spraying on live electric supply wires to
avoid any electric flash occures due to particles in air may charged due to static.
Contents under pressure do not puncture or incinerate.
Packing 400 ml (510 g) Ecofriendly Aerosol spray can.
Control Panel Circuit Breakers
Potentiometers
Electric Circuit Breakers
Solenoid Injectors for Diesel Fuel

Product Name CYCLO CONTACT CLEANER
Description CYCLO CONTACT CLEANER is a unique cleaner formulated
specifically to remove dirt, lint,light oil , moisture and to remove
carbon or oxide particles from precision electrical instrument.
It is an excellent preventive maintenance tool to keep close
tolerance equipment operating in tip-top condition.
Salient Features • Non-flammable
• Fast evaporating
• No Residue
• Anti-static
• No CFC or HCFC
Appearance Colourless to pale yellow liquid
Odour Mild characteristic
Propellant CO2
Flash point None None
Specific gravity
at 300
C
1.3 gms/cc
Application Areas
Switches, relays, plugs, electrical contact points, tuners, fuses, Circuit breakers, electric
motors, electronic connectors, ignition systems, switch gears.
Caution
Do not use on energized equipment. Contents under pressure. Keep away from open
flame, heat, and sunlight.
Electrical Devices in a Power Station
Electrical Switch Contacts
Electrical Bus Bar Contacts
Electric Motor Connections

15
Product Name CYCLO BREAKAWAY
Description Cyclo BreakAway is pure, oil-based product formulated to
penetrate faster & lubricate longer. It leaves a thicker, long
lasting lubricating film. Product performance completes the
cycle of lubrication, reducing the coefficient of friction of hot
or cold moving parts.
Salient Features • Penetrant & Super Lubricant
• Breaks Loose Rusted Joints in nuts & bolts
• Contains No Silicone
• Pure Oil Blend
• NSF Certified
Appearance Amber colored liquid.
Propellant LPG
Specific Gravity 0.7953
Surface Tension
ASTM D-971
<25 Dyn/cm
Flash point (CC)
ASTM D56
-96.10C (-1410F)
Dielectric Strength
ASTM D-877
> 20 kV/mm
Evaporation Rate(BA=1) >1
Vapor Density (vs. Air=1) >air
Boiling point range -230
C (-9.40
F) to - 2950
C( -5630
F)
Incompatible Materials Strong Oxidizers
Flammability -
Extremely flammable
Extremely flammable
Operating
temperature range
- 5 to 45 0
C
Application Areas
Penetrates & loosens rusted or frozen parts like bolts, locks, engine parts, hinges etc.
Lubricates moving parts to reduce friction and stops squeaks on rollers, hinges, wheels,
metal chains, etc.
Inhibits rust & corrosion on marine engineering equipments, tools, industrial machinery,
switches, relays, rollers, locks, aluminium & chrome surfaces
Caution
Base Foundation Rusted Bolts
Foundation Rusted Bolts
Rusted Old Hinges
Rusted Engine

Product Name CYCLO RED INSULATION VARNISH
Description It is a highly insulating varnish in convenient aerosol form.
It is a high gloss red colour high temperature resistance
coating to Class F winding of electrical apparatus. It is specially
designed for protection and sealing of insulated surface against
deterioration, exposure to oil, moisture,
acid and alkaline fumes.
Salient Features • High arc resistance and dielectric strength.
• Resists current leakage.
• Protects against moisture and corrosion.
• Quick drying.
• Resists chemical and moisture.
• Excellent Adhesion.
Appearance Dry Glossy Film
Propellant LPG
Colour Red
Specific Gravity @ R. T. 0.85 ± 0.05
Odour Typical solvent
Insulation Type Class – F
Drying Time for handling 25 – 30 minutes
Film Type Dry
Dielectric Strength 2100 volts per mil ( minimum ) ; 90 KV/mm ( minimum ) in air
Solvent Resistance Good
Moisture Resistance Excellent
Temperature Range -40 to 150°C
Application Areas
It can be used for protection of commutator end, switch board parts, leads, motor case
interiors, collector rings and shells, armature, bus bars, field winding of motor starters
and generators etc.
Caution
Power Supply Components
Electric Motor Winding
Electric Motor Winding
Ceramic Isolators

17
Product Name CYCLO ALUMINIUM SPRAY
Description It is a specialty high temperature coating developed to
resist heat at high temperatures and to withstand Corrosion,
Humidity, and other hazards normally encountered in chemical
plant environment. It withstands temperature upto 600°C on
a continuous basis (occasionally upto 700°C) and does not get
burned or peeled off or tarnished.
Salient Features • Ready to use touch up spray for metals.
• Better gloss retention, coverage and dry time
• Superior resistance to chipping, cracking and peeling.
• Smooth, durable and long lasting finish.
Appearance Bright Silver
Propellant LPG
Odour Mild
Copper Strip Corrosion Negative
Drying Time (Touch Dry) 5-8 minutes
Drying Time (Tack free) 8-10 minutes
Complete Dry 24 hrs
Coating Thickness 15 ± 4 micron
Area of Coverage 2.35 m2 per tin
Application Areas
Specifically formulated to protect high temperature surfaces operating upto 6000
C such as
Engine manifolds, mufflers, furnaces, heaters, & free standing fire places etc.
Caution
Automobile Engine Ehaust
Exhaust Manifold
Furnace Door
Exhaust Pipe

Product Name CYCLO ANTITRACK-H
Description It is a highly insulating anti track compound in convenient
aerosol form.It is an opaque red colour high temperature
resistant to coating to Class H winding or electrical apparatus.
It is specially designed for protection and sealing of insulated
surface against deterioration, exposure to oil, moisture, acid and
alkaline fumes.
Salient Features • High arc resistance and dielectric strength.
• Resists current leakage.
• Protects against moisture and corrosion.
• Quick drying.
• Resists chemical and moisture.
• Excellent Adhesion.
Appearance Dry Opaque Film
Colour Brick Red
Propellant LPG
Specific Gravity 0.85 ± 0.05
Odour Typical (solvent)
Drying Time for handling 10 – 15 minutes
Film Type Dry
Dielectric Strength 2100 volts per mil ( 90 kv/mm in air)
Solvent Resistance Good
Moisture Resistance Excellent
Temperature Range -40 to 180°C
Flash Point < -7°C
Boiling Point < -18°C
Application Areas
Used for protection of commutator end, switch board parts, leads, motor case interiors,
collector rings and shells, armature, bus bars, Ceramic insulators, field winding of motor
starters and generators etc.
Caution
Ceramic Insulators for Electric Distribution Line
Power Lines and Connections
Motor Armature
Filled Winding

19
RUST MANAGEMENT
Rustolene & Cyclo products give powerful rust managment solutions. They are quality products
that have been trusted to fight rust for years. They significantly reduce maintenance cost.
They are specially formulated to fight rust, which makes them indispensable to industrial
plants, factories and garages.
Product Name CYCLO RUST TREAT
Description NON TOXIC WATER BASED RUST CONVERTOR & METAL
PROTECTOR. It is a high performance co-ordination water based
polymer, actively converts the rust on the substrate into stable
organo metallic complex. On drying it forms impermeable
barrier to oxygen & moisture effectively protects metal from
further corrosion.
Salient Features • Water Born rust convertor
• Non Toxic
• Non Flammable
• Heat Resistant - upto 2000
C
Product Profile
Appearance Pale Brown thixotropic paste
Specific Gravity 1.0 gm/cc
Viscosity Thixotropy liquid.
PH 3 to 6
Drying Time Touch Dry : 15 minutes. ( In Winter season : 45 minutes approx )
Chemical Resistance Resistant to acid & alkalkies in moderate concentrations.
Toxicity Non-Toxic
Fire Hazard Non-Inflammable, water based.
Coverage 150 sq.ft. Per kg. @ Single coat of 25 micron.
Sprayable Application : Product can be diluted to sprayable
viscosity (Ratio :- P:W:70:30 w/w). Two coats should be used
if Spray application is required to obtain adequate DFT of
25 - 50 microns.
Dry Film Thickness 25-40 microns per coat.
Adhesion test-IS13515 Passes
Salt Water immersion
test 72 Hours
Passes.
Rust Converters
specification
IS 13515 :1992
Passes ( UDCT )
Scratch Adhesion Test
with 1000 gm weight
Passes.
Temperature Resistance upto 200°C
Application Areas
Use on RCC iron & Steel bars, Steel plant- MS structures Chemical Plants - MS Structures,
Fertiliser Industry - MS & Pipe Structures, Petroleum & petro chemical Plants, Port & Docks,
Bridges and Dams.
Top Coat Product acts as a undercoat and accepts top coats of –
Enamel Paint, Epoxy Coating, PU Paint, Polyester putty etc.
Uses Limitations Product is not recommended for immersion service, Not for
concrete or wood, Not for smooth, non rusted, oily & greasy
surface. Do not apply to metal below 5 Deg Cel or above 500
C.
Packing 5 lit Plastic Container.
Storage Store in cool area, away from direct heat & sunlight, below 30°C.
Shelf Life 3 years from date of manufacturing under normal storage
conditions in unopened container.
Metal Structure
Air to Soil Interfrace Pipes
Air to Soil Interfrace Pipes
Industrial Structures

Old Flange Bolts
Bearings
Metal Surface Cleaning
Industrial Valves
Product Name RUSTOLENE MAINTENANCE SPRAY
Description It is a specially designed product to meet the various
requirements, related to corrective and preventive maintenance
of all types of industries like process industry, textile industry,
engineering, fertilizer, sugar industry, power plant, refinery etc.
It is highly suitable for auto mechanic for maintenance of
all types of vehicles in garages. It is also suitable at office &
household for lubrication of moving assembly like door hinge,
locks, bearing of fan etc.
Salient Features • It is a very good cleaning agent
• It serves as a lubricant with rust protection
• The lower surface tension of the product imparts excellent
penetration to places where it is hard to reach and it also
loosens frozen assemblies
• It has excellent water displacement properties and excellent
resistance to corrosion
Typical Properties
Appearance Yellow to amber liquid.
Propellant LPG
Specific gravity 0.80 + 0.02
Flash point (Close cup) Above 380
C
Heat Resistance Degradation start at 1500
C
Coverage 15 – 30 m2/lit
Film Thickness 1 to 4.00 microns
Application Areas
• RUSTOLENE - Maintenance spray is used in industries like process industry, textile
industry, engineering, fertilizer, sugar industry, power plant, refinery etc.
• CLEANING : Used to clean oil, dirt, grease and various sticky materials. Cleaning of gear
box, ball bearing, arms, removal of sticker from metal or glass substrate
• DISPLACES MOISTURE - Used for removing the moisture from metal substrates, spark
plugs, and battery terminals
• PENETRATES & LOOSENS –It is used for opening of siezed nut –bolt of flange joint,
wheel’s nut – bolt of vehicle. It is used for dismantling of plant and machinery, farm
equipment, boiler, cooling tower, heat exchanger, water pump etc. which is exclusively
operating in highly corrosive environment
• PROTECTS - It has excellent corrosion resistance. It is suitable for protecting the tools &
equipment during transit and while keeping as inventory in store. It is highly suitable for
protecting the cutting & drilling tool, ball bearing, gear, chains, and wrench, springs etc.
• LUBRICATES - It lubricates with rust protection, hence the lubrication is long lasting for
all moving assembly. It is used for lubrication of door hinges, gear box, ball bearing,
conveyer chains, castors, lock etc.
Caution Do not place the containers on the vehicle dashboard.
Packing Aerosol can 400 ml
Storage Store in cool and dry place, away from direct sunlight & fire
spots in original sealed container. Do not puncture or store
aerosol can above 300
C
Shelf Life 3 years minimum from the date of manufacture when stored as
per storage instructions

21
FOAM & SEALANTS
Industrial Sealants are RT curing Silicon PU based compounds. They exhibit tough and long lasting
bond. These products are specifically formulated to bond or seal metal parts which exhibit high
temperature, chemical and environment resistance during assembly life in service.
Product Name PIDISEAL 3P NEUTRAL SILICON SEALANT
Description Pidiseal 3P is a single component elastomeric neutral silicon
sealant which cures at ambient temp. with moisture in
air. Pidiseal 3P Neutral has very good adhesion to most of
engineering materials such as metals, plastics, ceramics, glass,
fibre glass, etc.
Salient Features • Single component
• Ease of application.
• Fast curing at ambient condition
• Excellent resistance to weathering, vibration, moisture, etc.
• Good electrical insulation.
• Can be applied on vertical and overhead joints.
Technical Parameters
Colour Transferent
Flow/Sag at ambient Nil
Specific Gravity 300
C 0.92 to 0.99 gm/cm3
Skin formation time
at 300
C
5-20 minutes
Curing speed @ 300
C 3mm per day
Hardness Shore A after 7
days cure at ambient.
16-25
% Elongation at break
at ambient (300
C)
375 minimum
Paintability Not paintable
Temperature
resistance ( 0
C)
- 60 to + 180
Application Areas
Gear box & pipeline flanges sealing, motor and concreat sealing. It is ideal for sealing glass
and aluminium frame joint. Seals cracks around windows, ducts, fixtures, etc. Crack filling in
RCC, Joint sealing in wash basin, kitchen sink etc.
Packing Available in 280 ml cartridge
Storage Store in cool and dry place. Keep away from moisture,
direct sunlight & heat.
Shelf Life 9 months from the date of manufacture when stored in original
sealed cartridge.
White Clipping Path
Wooden Floor for Waterproof
Kitchen Sink Sealing
Metal Wall Window Gap Filling

Product Name USPRO FOAM
Description USPRO Foam is an one component moisture cure polyurethane
foam (OCF) used primarily to seal, fill, fix & adhere the gap
between door, window & wall.
Salient Features • Make use of convenience : No special training required, easy
to use like DIY.
• Automatism spray : needless pouring, pressure in cans can put
material into gap.
• Automatism expands: OCF can expand by itself and fill in
every gap.
• Air Humidity cure mechanism
• Automatism felt : No pre-treatment required for surface, it has
good viscosity (especially wet surface.)
Base Polyurethane
Flame retardancy B3 GRADE.
Density 15 - 30 kg/m3
Temperature resistance
of cured foam
35 to 800
C
Tack free time 9 -13 min
Cutting time 60 min
Foam Yield 6 litters per 100 ml.
Adhesive strength
PVC to PVC
>100KPA
Aluminium to Aluminium >80KPA
Elongation at break 8 - 20%
Compression strength
at 10% compression
35 - 100KPA
Shear Strength 22 - 50KPA
Water absorption 0.03% volume
Thermo conductivity <0.035 Kcal/m H0
C
Tack free time: 9 -13 min
Closed cells: 60 - 70%
Average burning time (s): 60
Average burning scope : 25 (mm)
Application Areas
Sealing of Cable entries from walls, electric switchboards, Panel Boards.
Sealing of telecom tower- Power supply panel boards.
Advertisement model : making of model, sand plate, repair of show board.
Sound insulation and absorption : insulate and absorb sound as a sealant in speech room
and broadcast studio.
Daily maintenance : repair the hole, gap, wall brick, earth brick.
Water proof and block leakage :
Packing and transportation, pack valuable and fragile goods easily, time saving, quick,
shock and press resistance.
Packing 750ml Aerosol can with extention tube for material dispensing.
Storage Store in cool & dark shaded place away from direct sunlight in
tightly closed condition. There is pressure of 5-6kg/sq.cm(250
C),
hence to ensure that temperature won’t exceed 250
C during
storage & transportation to avoid explosion.
Shelf Life 9 months when store below 300
C from the date of
manufacturing in factory sealed container.
Cables on Walls in New House
Electrical Cables Fixed on the Wall
Door and Wall Gap
Wireless Antenna Tower

23
Product Name WRAPSEAL QUICK REPAIR KIT
Description WrapSeal Repair System is specifically designed for under
pressure leak repair applications on pipes such as Plastic
PVC, CPVC, Fibreglass , Polyethylene, Polypropelene, Steel ,
Aluminium , Copper, Galvanised Iron and more. WrapSeal Tape
offers the geometric flexibility to repair pinholes, joints, tees
and couplings.
Salient Features • Repairs under active leaks in 30 minutes , for metal or plastic
pipes ( upto Dia 18")
• Pressure Resistance upto 400 PSI ( 28 kg/cm2
)
• Safe for drinking water & Resistant to most of the chmicals.
• Temperature Resistance upto 2000
C
• Suitable for Liquid or Gas Pipelines
• Permanent Repair Or Extend service life of pipes.
• Ideal for pipe reinforcement & corrosion protection.
Product Profile
Pressure Test ASTM D 1599 Test temperature at 23°C, mode of failure – leak.
½”steel pipe with 1/8”hole when wrapped
with WRAPSEAL without SEAL STIC withstands
1,500 PSI
½”steel pipe with 1/8”hole when wrapped with
WRAPSEAL with SEAL STIC withstands 4,000 PSI
½”steel pipe with ½”hole when wrapped with
WRAPSEAL without SEAL STIC withstands 600 PSI
Tensile Elongation ASTM D 638 1.2% ± 0.7% (Test temperature at 23°C)
Elongation to Break ASTM D 638 400% (Test temperature at 23°C)
Compression Strength ASTM D 695 13,750 PSI ± 530 PSI (Test temperature at 23°C)
Yield Strength ASTM D 790 2,260 PSI (Test temperature at 23°C)
Toughness ASTM C 882 35,000 PSI (Test temperature at 23°C)
Shrink Force ASTM 638 38 PSI (Test temperature at 150°C)
Volume Resistivity ASTM D 257 10-14 ohm-cm
Heat Shock ASTM D 2571 No visual crashing, flowing or dripping (Test
temperature at 225°C for 4 hours)
Adhesive Peel to Steel, PE
and Epoxy
ASTM D 1000 10 lbs per linear in.
Impact Strength ASTM G 14 30 in-lb
Moisture Vapour
Transmission
ASTM D E-398 0.1g (Per 24 hours per 100 sq. in.)
Dielectric Breakdown
Voltage
ASTM D 149 20kV
Cured Hardness Shore-D 82
Application Areas
PIPE LEAKS : Plastic PVC, CPVC, Fibreglass , Polyethylene, Polypropelene, Steel , Aluminium,
Copper, Galvanised Iron. Liquid or Gas Pipelines. Pipes Containing Water, Waste water,
Steam, Acids like Hydrochloric Acid, Sulphuric Acid, Nitric Acid, Phospheric Acid, Permanent
Repair or Extend Off-line repairs, Active leaks, Sealing Joints, Hazardous material spillage
controll. Reinforcement of thinned walls of the metal pipes. Structural reinforcement.
Repairs in Hard to reach areas. Underwater repairs. Electrical cable repairs.
Packing 2" X 6' ( 1.83 m x 5.08 cm)
4" X 12' ( 3.66 m x 10.16 cm)
Each pack contents Operating Instructions for Installation,
Protective Gloves & Fast Set Epoxy Putty.
Storage Store in cool and dry condition. Away from sunlight and
direct heat below 300
C
Shelf Life Minium 2 years.
Pipe Repair
PIpe Repair at Junctions
Leakage of Steam in a Control Station
Leakage of Steam Blowndown from Boiler

Product Name FEVICOL SR CBR 7 & CBA7
Description Fevicol SR CBR 7 is a two component synthetic rubber based
adhesive cement, COLD VULCANIZING COMPOUND cures at
room temperature. The adhesive cement system is ideally
suitable for joining and emergency maintenance of conveyor
belts It can be also used for other application such as rubber
linings.
Salient Features • Reduces down time.
• Ease of application.
• Adequate tack retention time.
Properties Unit Typical Data
CBR-7 CBA-7
Color & Appearance --- Yellowish Brown
viscous liquid
Brown coloured
thin liquid
Solids % 18-19 30%
Viscosity @ 300
C Poise 12-16 NA
Tack retention time
at ambient
Min 5-7 NA
Open Time Min Minimum 5 Min NA
Pot life of 1lit
Mix solution at 300
C
Minutes 60 minutes
Tensile Shear Strength
(3ply rubber belt /cotton
/PE mix fabric.) after
24 hrs at ambient.
Kg/sq.cm 20 Minimum.
Mixing Ratio: CBR7: CBA7 CBR7: 100 parts with CBA7: 5 parts
by weight
Application Areas
Fevicol CBR 7 is used to bond rubber to rubber sheats , by lap shear (overlap/ Splicing)
joints and Rubber sheet to MS roller. This product is extensively used in maintanance of
Conveyor Belts in steel, cement, coal mine plants, fertilizer & similar industries.
Coverage
1 lit resin mixed with 50 ml hardener part , Single Coat on both the substrates normally
covers 2-3 sq.Meter area and double coat on both the substrates covers 1-2 Sq. Meter
area depending upon the porousity of the rubber belt. Coverage on porous substrates is
normally less than non-porous substrates.
Splice joint : Bond Area is normally 60-70% of the belt width.
Recommendation : We recommend two coats to obtain a sufficient bonding
strength.
Packing CBR 7 : 1 litre and CBA 7 : 50 ml
Storage Store below 300
C in original sealed container, under dry area,
away from direct sunlight, rains and moisture.
Shelf Life 24 months from the date of manufacturing.
Conveyor Belt Roller
Conveyor Belt Roller
Conveyor Belt
Conveyor Belts at a Processing Site

25
ANAEROBIC ADHESIVES
Anaerobic adhesives & sealants are ideally developed for various needs & requirements of both
production & various maintenance applications eg. Thread locking, Retaining, Pipe sealing, Gasketing
etc in routine maintenance of machineries and structures in industries like Steel, Power Plants,
Fertilizers, Chemical, Textiles, Sugar etc. These products cure in the absence of air & presence of metals
having close intimate contact in engineering assemblies.
Category Thread Locker
Product Name FEVICOL ANR 243
Description Medium strength Anaerobic formulation, Specially designed for
sealing & locking of studs, nuts, bolts & small screws.
Salient Features • Oil Telerant, Thixotropic grade
• Withstands vibrational loads
• Prevents corrosion and replace Nylon nuts
• Can be used for medium strength applications
• Can be dismantled with mechanical tools
• Superior to conventional locking devices
Product Profile
Technology Acrylic
Chemical Type Dimethacrylate ester
Components One component - requires no mixing
Cure Anaerobic
Application Threadlocking- Medium Strength
Typical Properties
Appearance Blue thixotropic Liquid.
Viscosity @300
Cel 1500-4000 cps
Specific Gravity @300
C 1.1 +/- 0.05
Break loose Torque ISO
10964 , Pre-torqued to
50 Kgf.cm ( M10 steel
nuts and bolts )
250 Kgf.cm
Prevailing Torque ISO
10964 , Pre-torqued to 50
Kgf.cm ( M10 steel nuts
and bolts )
150 Kgf.cm
Gap Fill 0.25 mm (max)
Cure Speed @ 300
C 15 minutes
Full Cure @ 300
C 24 hrs
Temperature Resistance -50 to 1500
C
Application Areas
Fills gaps upto 0.25 mm
Good resistance to all usual fluids, gases, chemicals
Temperature resistance upto 1500
C
Oil Resistant, ideal for applications with slight oil film or oil contaimination. Used in pump
motor mounting bolts, presses etc. threaded nuts, bolts which requires easy reopening .
Packing 50 ml & 250 ml plastic bottle ( LLDPE )
Storage Store under cool, dry condition, away from direct heat
& sunlight, below 300
C.
Shelf Life 15 months from the date of manufacture in unopened bottle.
Thermal Power Plant Piping and
Instrumentation Modern Factory Machinery
Overhead Motors
Machinery Nut Bolts
Valve Nut Bolts

Category Thread Locker
Description Fevicol ANR 262 is a high strength Thixotropic fast curing
anaerobic formulation ideally designed to provide reliable
locking of large diameter studs upto M20 size. The product is
specially designed with high gap fill capacity & can be used on
Plated / Passive Metal surfaces.
Salient Features • Single component.
• High Strength.
• Solvent less.
• Suitable For Plated / Passive surfaces.
• Good resistance to all usual fluids, gases, chemicals.
• Prevents fretting thread corrosion.
Product Profile
Technology Acrylic
Cure Anaerobic
Application Threadlocking- High Strength
Typical Properties
Appearance Red Liquid
Viscosity @300
Cel 1200-2000 cps
C 1.1 +/- 0.05
nuts and bolts )
250-350 Kgf.cm
10964, Pre-torqued to
nuts and bolts )
150-250 Kgf.cm
Gap Fill 0.25 mm (max)
Cure Speed @ 300
C 10 minutes
Full Cure @ 300
C 24 hrs
C
Application Areas
High Strength locking, Heavy duty equipment such as construction & rail road assemblies,
suspension bolts, gear bolts, foundation bolts, mounting bolts on crown wheels, Cap seals
in engine blocks. Axel studs etc
C.
Bolts and Nuts on Pipe Line Connection
Diesel Engine Camshaft and Valves
Moterise Valve Pump
Transmission Gearbox

27
Category Flange Gasket Sealant
Description This is a specially formulated anaerobic FIP Liquid Gasket to
fill the gaps, cracks, hills, micro porosities by matting a 100%
solid content. It forms a high strength seal between flanges and
replaces conventional die cut and preformed Gaskets.
Salient Features • Resistant to fuels & most chemicals
• Excellent on Aluminium Surface
• Suitable for machined and flange surfaces
• Reduces inventory of pre-cut gasket
• Thixotropic Paste- Easy to dispense on flange surface
• Ease of disassembly.
Product Profile
Technology Acrylic
Cure Anaerobic
Application Gasketing and Sealing
Typical Properties
Appearance Pink opaque viscous paste
Viscosity @300
Cel 40000-60000 cps
C 1.1 +/- 0.05
Static Shear strength
on MS pin & Collar,
Grit blasted after 24hrs,
ISO10123
7.5-12.5N/mm²
Lap Shear Strength on
steel (grit blasted) after
24hrs, ISO 4587
5-10 N/mm²
Gap Fill 0.5 mm
Cure Speed @ 300
C 15 minutes
Full Cure @ 300
C 24 hrs
C
Application Areas
Fast setting sealant suitable for hand dispensing , used in air compressors, pumps & gear
boxes especially on rigid iron and steel flanges, Pipe flanges. In oil filter as a sealant to
prevent oil leakage.
C.
Engine Oil Sump
Industrial Pipeline Flange
Piping Flange
Indusrial Gas Pipeline

Category Flange Gasket Sealant
Description Specially formulated, Thixotropic fast setting medium strength
anaerobic Flange sealant specially designed for sealing rigid &
semi rigid metal flanges Due to its fast curing& instant sealing
characteristics, it quickly develops low pressure resistance. It has
also characteristic feature of ease of disassembly.
Salient Features • Resistant to fuels & most chemicals
• Ease of disassembly
• Quickly develops low pressure resistance
Product Profile
Technology Acrylic
Cure Anaerobic
Application Gasketing and Sealing
Typical Properties
Appearance Orange opaque viscous paste
Viscosity @300
C 30000 -50000 cps
C 1.1 +/- 0.05
nuts and bolts )
140 Kgf.cm
nuts and bolts )
20 Kgf.cm
Gap Fill 0.5mm
Cure Speed @ 300
C 15 minutes
Full Cure @ 300
C 24 hrs
C
Application Areas
It is recommended to use as fast setting flange sealant for all types of machineries such
as air compressors, pumps & gear boxes of heavy duty cranes ,oil sumps etc especially on
rigid& semi rigid iron and steel flanges.
C.
Flange Bolts and Nuts
Gear Box Cover
Steel Flanges
Heavy Duty Gear Box

29
Category Thread Sealant
Description Anaerobic Liquid pipe sealant, speciality formulation to seal
pipe joints/fittings (pneumatic and hydraulic) applications like
pipe joints, pneumatic fittings and can be used in place of
teflon tape.
Salient Features • Seals upto 400 kg/cm2 pressure.
• Eliminates use of teflon tape
• Used for high pressure threaded joints
• Ensures an extremely durable chemical resistant seal
• Resistant to fuels, oil, solvents and most chemicals
Product Profile
Technology Acrylic
Cure Anaerobic
Application Thread Sealing
Typical Properties
Appearance Light Yellow Clear liquid
Viscosity @300
C 8000-10000 cps
C 1.1 +/- 0.05
5 Nm ( M10 steel nuts
and bolts )
9.8 N.m – 19.6 N m
5 Nm ( M10 steel nuts
and bolts )
4.9N·m – 19.6 N m
Compressive Shear
Strength on Steel pins
and collars, ISO 10123
≥ 9.8 N/mm²
Gap Fill 0.2 mm
Cure Speed @ 300
C 20 minutes
Full Cure @ 300
C 24 hrs
C
Application Areas
Used for Max Pipe Diameter to 50mm (2")
Seals hydraulic and pneumatic threaded fittings
Temperature resistance upto -55 to 1500
C
Seals pipe threads, pneumatic, hydraulic,instrumentation fitting, Seals upto
400kg/cm2 pressure.
Reduces the migration of liquid product after application to the substrate. Hydraulic
refrigeration fittings, joints & couplings for the finest hydraulic & refrigeration mechanisms.
It can be used on flared & compression fittings as well as on tapered & straight threads.
C.
Hydraulic Pressure Gauges
Hydraulic Tube Fittings Manometers
Multiple Hydraulic Tubes and Fittings
Hydraulic Tubes Fittings and Levers

Category Thread Sealant
Description “Designed to seal medium strength, Coarse type threaded
joints/fittings to provide reliable instant sealing on metal
threaded pipes . The product is specially designed for use
on stainless steel & other plated pipes eliminating surface
activation”
Salient Features • Eliminates use of teflon tape
• Used for high pressure threaded joints
• Ensures an extremely durable chemical resistant seal
• Resistant to fuels, oil, solvents and most chemicals
• Suitable For stainless steel Plated / Passive surfaces.
Product Profile
Technology Acrylic
Cure Anaerobic
Application Medium Strength Thread Sealing
Typical Properties
Appearance Yellowish paste
Viscosity @300
C 30000-50000
C 1.1 +/- 0.05
nuts and bolts )
165 Kgf.cm
50 Kgf.cm (M10 steel
nuts and bolts )
60 Kgf.cm
Gap Fill 0.25 mm
Cure Speed @ 300
C 17 minutes
Full Cure @ 300
C 24 hrs
C
Application Areas
Used for Max Pipe Diameter to 75mm (3")
Seals coarse type threads
Designed for locking & sealing of threaded pipes & Fittings. Suitable for Stainless Steel
close fitting surface. Prevents loosening & Leakage from shock & vibrations.
C.
Hot and Cold Water Supply Fittings
Metal Pipes with External Thread
Flange Bolts and Nuts
Plumbing Fixtures

31
Category Bearing Retainer
Description It is a Heavy duty, Fast curing, high strength anaerobic retaining
formulation ideally designed to bond and retain cylindrical
parts such as shafts, gears, pullys, Where maximum strength
is required with higher gap filling ability. It is designed for
cylindrical parts where consistent clean surface cannot be
maintained.
Salient Features • Excellent resistance to Dynamic, Axial & radial loads.
• Excellent resistance to all usual fluids, oils , gases, chemicals
• Temperature resistance upto - 55 to 1500
C.
• Prevents fretting corrosion
• Dampens vibration, shock & impact loads
• Allows uniform load distribution -Eliminates interference fits
Product Profile
Technology Acrylic
Cure Anaerobic
Application High Strength Bearing Retainer
Typical Properties
Appearance Green liquid
Viscosity @ 300
C 2200-2700 cps
Specific Gravity @ 300
C 1.1 +/- 0.05
Break loose Torque
ISO 10964,
Pre-torqued to
nuts and bolts )
350- 450 Kgf.cm
Prevailing Torque
ISO 10964,
Pre-torqued to
nuts and bolts )
100-200 Kgf.cm
Static Shear Strength on
Steel pins and collars,
ISO 10123
200-300 kg/cm²
Gap Fill 0.25 mm
Cure Speed @ 300
C 10 minutes
Full Cure @ 300
C 24 hrs
C
Application Areas
Retaining of cylindrical parts such as Bearings, bushes, Gears , Pullys, locking bushings
and sleeves into housing & on shafts, etc
Some typical applications include retaining of bush in timing cover (oil impregnated
bushings into housings), to retain speedometer drive housing etc.
C.
Motor Shaft
Bushings
Engine Gear Cover
Mechnical Bushes

Category Surface Activator
Description FEVICOL ANR 7649 is a surface activator used to increase the
cure speed of Cyclo anaerobic products on passive metals
or inert surfaces and for large bond gaps. Curing process is
accelerated by FEVICOL ANR 7649 surface activator at lower
temperature .( <150
C ).
Salient Features • Activates inactive surfaces.
• Accelerates curing on cold parts, large gaps and deep threads.
• Speeds up cure on active surfaces
• Cleans surfaces for better locking & sealings.
Typical Properties
Appearance Green liquid.
Specific Gravity @ 25 °C 0.78
Drying Time @ 30 °C, 15 seconds
Fixture Time, (using
anaerobic ANR638)
ISO 4587
2 - 5 minutes
Application Areas
Surface activator for inactive metal surfaces like -
Pure Aluminum
Anodized Surfaces & Bright Platings
Stainless Steel
Titanium
Zinc
Cadmium
Packing 100 ml Glass bottle.
Storage & Shelf Life The Shelf life in the original closed packing is 15 months from
the date of manufacture when stored under cool, dry condition,
away from direct heat & sunlight.
Alumnium Flanges
Coated Fasteners
Pile Flange Bolts
Stainless Steel Bolts

33
ADDITIONAL PRODUCT
Product Name DR. FIXIT PIDIPOXY EP (EPOXY PRIMER)
Description Dr. Fixit Pidipoxy EP is epoxy primer composed of epoxy resin,
hardener & many other additives. It is used for bonding of old to
new concrete and also used for repair works, stone works and
screeds because it provides strong monolithic bond, very high
strength than the parent concrete & sufficient application time
to finish the job.
Salient Features • Exhibits excellent mechanical strength & bond strength.
• Adhesion - Exceeds the tensile strength of the host concrete,
hence bond strength is excellent.
• Ease of application - Slow curing allows time to erect steel
reinforcement and framework
• Suitability - For use on horizontal surfaces or on vertical
surfaces where mortar or concrete can be supported by
framework. The long‘open time‘ makes it suitable for use
with framework or where additional steel reinforcement has
to be fitted.
Pot life, at 300
C ... 1-2 Hrs
Over lay time ... max. 24 Hrs
Initial hardness 48 Hrs
Full curing time, 7 Hrsw
Compressive Strength, BS 6319,Part 2 50 N/mm2
Tensile strength, BS 6319, Part 7 12 N/mm2
Flexural strength BS 6319, Part 3 35 N/mm2
Shear strength BS 6319, Part 4 25 N/mm2
Adhesion bond to
concrete
AST M C 881 3 (In general, the bond will
always exceed the tensile
strength of the host concrete.)
Specification Gravity 1.06 +/-0.02
Tack free time Max 4 Hrs.
Application Areas
Roads, bridges, pavements, steel, loading bays and factories.
For bonding granolithic floor toppings such as sand cement screed, mortars and epoxy
screed. Internal and external applications. Used as part of a repair system where a
substrate/repair barrier is required. It is also used to seal microporocities of concrete &
improve bonding with expoy coating.
Coverage
The coverage of Dr. Fixit Pidipoxy EP is approximately 4 to 5 m2
/ kg / coat. *Coverage may
vary depending upon the substrate profile.
Packing 5 kg
Storage Store in original sealed container, under cool & dry area, away
from direct sunlight, rains, moisture etc.
Shelf Life Shelf life is 12 months from the date of manufacturing. Store in a
cool & dry place in unopened condition below 300
C
Floor primer for Epoxy Coating
Floor Primer for for Dielectric Epoxy Coating
Floor Primer for for Dielectric Epoxy Coating
Industrial Flooring

Maintenance Repair
& Overhauling
Maintenance products offered to enhance performance of
Industrial equipments, Lower down-time & increase profitability
backed by quality services.
SEGMENTS
Petroleum & Petrochemical Plants
Power Plants
Cement Plants
Fertizer Industry
Chemical Plants
Steel Plants
Mining
Paper & Pulp
Ports & Docks
Bridges & Dams
PRODUCTS
Speciality Coatings
Cold Repair Compounds
Emergency Repair Kit
Industrial Aerosols
Electrical Maintance
Rust Management
Foam & Sealants
Conveyor Belt Repair
Anaerobic Adhesives

Distributed by:
For further information contact:
CORPORATE OFFICE: Ramkrishna Mandir Road, Andheri (East), P. O. Box No. 17401, Mumbai 400 059.
T 2835 7000 F 2835 7008 M 9892266658 / 9870340997 E oemmropil@pidilite.co.in W www.pidilite.com

MRO Catalogue - 2016 (2) (1)

Recomendados

Recomendados

Mais conteúdo relacionado

Mais procurados

Mais procurados (20)

Semelhante a MRO Catalogue - 2016 (2) (1)

Semelhante a MRO Catalogue - 2016 (2) (1) (20)

MRO Catalogue - 2016 (2) (1)