The all new T*AP from Junger Audio is a wide band 8 channel processor (8x1, 4x2, or 5.1+2) primarily designed for TV playout, studio and ingest facilities.

1. The reference standard in
audio levelling and loudness control introduces:
T*AP
TM
• Level Magic Loudness Control • 5.1 Surround Upmix • Spectral Signature by Junger Audio
• SDI Embedded Audio • Dolby® Processing incl. Level Magic II Loudness Control
_ Metadata Management
Television _ 5.1. Surround Upmix
l
Television
Audio Processor Audio Processor
_ Spectral Signature by Junger Audio
_ SDI Embedded Audio
_ Dolby® Processing & Metadata Management
AES/EBU 5.1 Spectral Level AES/EBU
t
in Upmix Signature Magic out
Metadata
IF slot 1 Generator t IF slot 1
in out
IF slot 2 Dolby® Dolby® t IF slot 2
in decoder encoder out
The wide band 8 channel processor (5.1+2 or 4x2) focuses on automatic and adaptive loudness con-
trol using Jünger Audio’s renowned LEVEL MAGIC™ algorithm (ITU compliant). It also offers dynamic
filters so that the sound can be ‘coloured’ much more easily than one can achieve with a traditio-
nal multi band sound processor. Optional Dolby Decoding and Encoding (D, D+, or Pulse), as well
as metadata management, are also provided along with 5.1 Downmix and Jünger Audio’s recently
introduced UPMIX functionality.
www.junger-audio.com • www.jungeraudioasia.com

2. Television Audio Processor T*AP
AES Input BASE UNIT 3G/HD/SD-SDI I/O OPTION
Number of channels: 4 x AES/EBU , AES3id Input Electrical SDI input standards (auto sensing)
Input impedance: unbalanced, BNC75 Ohm Power Supply: AC 85 … 264 V, 50..60 Hz 3G - SMPTE 424/425M (Level A/B)
Input level: 0.3 … 5.0 V pp dual redundant power supply HD - SMPTE 292M
Input sample rate: 48 kHz Consumption: max. 46 W without hardware remote SD - SMPTE 259M
Sample Rate Converter: max. 58 W with hardware remote formats 1080p23.98, 24, 25, 29.97, 30, 50, 59.95, 60
Input sample rate: 32 kHz ..192 kHz ( total power consumption depends on option boards) 1080i50, 59.94, 60
THD+N: < 130 dB @ 0 dBFS Mechanical 720p23.98, 24, 25, 29.97, 30, 50, 59.94, 60
Resolution: 24 bit Dimensions : 19 „, 1RU, depths: ca. 27 cm 625i50; 525i59.94, …
AES Output Weight: connector BNC IEC 169-8); 75 Ohm
Number of channels: 4 x AES/EBU , AES3id Ambient return Loss > 15 dB (typ. > 18dB) from 5MHz to 1485 MHz
Output impedance: 75 Ohm unbalanced, BNC TTemperature: 0°C to 50°C operating > 10 dB (typ. > 11 dB) from 1485 MHz to 2970 MHz
Output level: 1.0 V pp unbalanced @ 75 Ohm -20 ºC to 70 ºC non operating adaptive equalization, typical of Belden 1694A coaxial cable
Bypass: power fail relay bypass Humidity: 90%, non condensing 250 m at 270 Mbps; 250 m at 1.485 Gbps; 150 m at 2.97 Gbps
jitter tolerance Timing: > 2UI, Alignment: > 0.7 UI
SYNC intern: 48 kHz, +- 10 ppm SDI output standards
SYNC extern: BNC, ICE 61169-8 A 3G - SMPTE 424/425M (Level A/B)
AES3id , 44.1 kHz, 48 kHz HD - SMPTE 292M
1 V ±10% at 75 Ohm SD - SMPTE 259M
Wordclock, 44.1 kHz, 48 kHz formats 1080p23.98, 24, 25, 29.97, 30, 50, 59.95, 60
1 V …3 V at 75 Ohm 1080i50, 59.94, 60
Video BB, Tri-Level SD, HD 720p23.98, 24, 25, 29.97, 30, 50, 59.94, 60
0.5…1.0 V at 75 Ohm 625i50; 525i59.94, …
SYNC extern via AES input quantization 10Bit
Ch1/2, AES3id , 44.1 kHz, 48 kHz connector BNC IEC 169-8); 75 Ohm
1 V ±10% at 75 Ohm return Loss > 15 dB (typ. > 18dB) from 5MHz to 1485 MHz
SYNC extern via Option Board > 10 dB (typ. > 11 dB) from 1485 MHz to 2970 MHz
SDI: signal level 800 mV +/- 10%
48 kHz, synchronous to video (SD, HD, 3G) D.C. offset 0.0 V +/- 0.5 V
44.1 kHz , 48 kHz asynchronous (HD, 3G) rise and fall time < 135 ps at HD/3G, < 800 ps at SD
AES : overshoot < 10% of amplitude
44.1 kHz ,48 kHz, sync to CH1/2 output jitter Timing: < 0.5 UI, Alignment: < 0.2 UI
SYNC Output Wordclock, 2 V at 75 Ohm
Metadata Input / Output relay bypass (manual or automatic on power fail)
Standard: SMPTE RDD6-2008, 15 Frames video delay; 16 channel audio de-embedder / embedder
Dolby E Metadata Stream , 115.2 kbps REMOTE VANC (SMPTE 2020-2) de-embedder / embedder; 320 ms audio delay per audio channel
Connector Input: Sub-D, 9pol female Electrical
Connector Output: Sub-D, 9pol male Power Supply: POE, Power Over Ethernet, IEEE 802.3af AES/EBU I/O OPTION (4x AES I/O [DD 188])
Consumption: 8W connector 25pin Sub-D female
Max Cable Lenght 30 m , direct supply from Basic Device inputs 110 Ohm balanced or 75 Ohm unbalanced jumper selection
GPI 0.3 V … 5.0 Vpp; sample rate converter 24 Bit,
Cable Type : S/FTP CAT.5E 26AWGx
Level: +3…+30V, H-active, optocoupler input sample rate 32 kHz … 192 kHz, THD+N < 130 dB @ 0 dBFS
Mechanical
Connector: 25 pin SUB-D female outputs 110 Ohm balanced or 75 Ohm unbalanced jumper selection
Dimensions: 19 „, 1RU, depths: ca. 6 cm
GPO 4.0 Vpp balanced, 1.0 Vpp @ 75 Ohm
Ambient
Level: relay with change over contact power fail relay bypass
Temperature: 0°C to 50°C operating
Contact rating: 1A 24 V , 0,5 A 42 V
-20 ºC to 70 ºC non operating
Aux. Voltage Supply: isolated +5 V ANALOGUE I/O OPTION (4x analog I/O [AN 144])
Humidity: 90%, non condensing
Connector: 25 pin SUB-D female connector 25pin Sub-D female
input impedance: > 10 kOhm, electronically balanced
max input level: 0.0 dBu … +24 dBu adjustable in 0.5 dB steps
dynamic range: 115 dB
THD+N: @ -1 dBFS, 15 dBu: -90 dB
frequency response: 20 Hz … 22 kHz (-2.0 dB)
crosstalk @ 20 kHz: > 100 dB
calibration gain mismatch: < 0.3 dB
output
impedance: 5 Ohm, electronically balanced
Rear panel view T*AP with options max. output level @ 0 dBFS: 0.0 dBu … +24 dBu adjustable in 0.5 dB steps
dynamic range: 112dB
on board: 4x AES/EBU I/O, Sync In, WCLK Out, Ethernet LAN, RS-232 via USB, 8x GPI in, 8x GPO out, Dolby RS-485 in/out THD+N @ -1 dBFS: 92 dB
frequency response: 20 Hz … 22 kHz (-2.0 dB)
options: 3G/HD/SD-SDI (16ch) • AES/EBU I/O (8ch) • Analogue I/O (4ch) crosstalk @ 20 kHz: > 100 dB
Decoder Dolby Digital / Digital+ / E • Encoder Dolby Digital+ / Digital • Encoder Dolby E gain mismatch balanced / unbalanced: < 0.3 dB
power fail relay bypass
Technical Specifications www.junger-audio.com • www.jungeraudioasia.com
Design and specifications are subject to change without notice. All rights reserved. © 2011 Jünger Audio Berlin
www.junger-audio.com • www.jungeraudioasia.com

3. Concept _ unique “all in one box” solution
_ 8ch DSP processing
_ 16ch SDI support
_ designed for automation control
_ flexible audio interface configuration
_ Redundant Power Supply
_ Detachable Operating Panel
_ 2x Interface Option Slots
_ all I/O interfaces with power fail bypass function
_ Small Size: 19”, 1RU, base unit only 25cm depth
operating panel only 4cm depth!
_ Eco-friendly Low Power Consumption – below 60VA
_ T*AP is
Processor Box and
detachable Operating Panel
_ Single Processor Boxes
and Single Operating Panels
are available
Remote Concept
_ PoE (Power over Ethernet)
_ Setup and Configuration by Web Interface
_ Single Remote (Pool Units)
_ Multi Remote (Single Units)
_ Intelligent Access Control
Audio Processing _ Four Major Processing blocks:
_ Three Basic Link Modes: Input Conditioning
4x Stereo 5.1/7.1 Upmix
5.1 Surround & Stereo Effects (inc. Spectral Signature by Jünger Audio)
7.1 Surround Level Magic II Loudness Control
Input Conditioner Surround Processor Effects Processor Level Magic
1 8
5.1 HPF 5.1 Upmix Center Spectral 4 Band Comp 5.1 Leveler Peak
0 5.1 5.1 5.1 5.1 Parametric 5.1 Quasi 5.1 +
Delay Ducker Signature Limiter 5.1
Quasi
LPF Surround EQ Peak
Delay 2
Format/ /
Peak Stereo Input True
I /
Fail Over Down St. St.
Peak
Delay Gain St. Detector St M O
N St. True Mix
Stereo
Peak Loudness O
St. U
P Stereo Meter N Delay
Stereo Stereo
U 2xC 2x Leveler Ducker
St
O
T
Delay 2x Center
T Center P
M U
S
Monitor
O Stereo T
Stereo Monitor Gain N Delay S
O
Spectral Signature - Fully Automated Dynamic EQ
by Jünger Audio - Unique low latency dynamic filter design
- Dynamic Equalization Gain according to
Reference Mask
- Adaptive to Signal Input Level
www.junger-audio.com • www.jungeraudioasia.com