Omniprobe, Inc
3 SlideShares 1 Seguidor
Personal Information
Organização/Local de trabalho
Dallas, TX United States
Setor
Technology / Software / Internet
Site
www.omniprobe.com
Sobre
Omniprobe, Inc. is an Oxford Instruments company and a world leader in FIB and SEM accessories enabling "nano-lab" capabilities. Products include nanomanipulation solutions for electrical/mechanical testing and sample preparation, as well as a multi-gas injector system for deposition and etching in the SEM or FIB. The original flagship product is the AutoProbe™ for TEM sample prep via the "in-situ lift-out" method. The OmniGIS™ opens new horizons for in-situ research and enables new research approaches, such as performing atomic layer deposition (ALD) in the FIB or SEM.
Marcadores
in situ lift-out tem sample preparation fib multi-gis gis sem multiple gas injection transmission electron microscopy nanomanipulation tem sample lift out gas injection lift-out short-cut fib in situ lift out inlo atom probe tensile test nanomechanical test nanomanipulator autoprobe ebid ald multiple gis febip
Ver mais

Documentos

(3)

Application Note: Nanomechanical Tests Using a Nanomanipulator

Há 12 anos • 283 Visualizações

Application Note: Advanced Applications Enabled by OmniGIS® Gas Injection

Há 12 anos • 310 Visualizações

Tech Tips: 12 Reasons to Lift-Out TEM Samples

Há 12 anos • 653 Visualizações

Gostaram

(3)

3D EBSD Overview - Metallurgical Mater Trans A Vol 39 A (2008) 374

Dierk Raabe • Há 13 anos

Introduction to em_booklet_july_10

Henry Cañizares • Há 13 anos

Schamp 2008 Mm

tomschamp • Há 15 anos
Personal Information
Organização/Local de trabalho
Dallas, TX United States
Setor
Technology / Software / Internet
Site
www.omniprobe.com
Sobre
Omniprobe, Inc. is an Oxford Instruments company and a world leader in FIB and SEM accessories enabling "nano-lab" capabilities. Products include nanomanipulation solutions for electrical/mechanical testing and sample preparation, as well as a multi-gas injector system for deposition and etching in the SEM or FIB. The original flagship product is the AutoProbe™ for TEM sample prep via the "in-situ lift-out" method. The OmniGIS™ opens new horizons for in-situ research and enables new research approaches, such as performing atomic layer deposition (ALD) in the FIB or SEM.
Marcadores
in situ lift-out tem sample preparation fib multi-gis gis sem multiple gas injection transmission electron microscopy nanomanipulation tem sample lift out gas injection lift-out short-cut fib in situ lift out inlo atom probe tensile test nanomechanical test nanomanipulator autoprobe ebid ald multiple gis febip
Ver mais