2. www.belmash.by
JLLC “Belmash Factory” is a
manufacturer of DIY woodworking
machines located in Mogilev, Republic
of Belarus.
It was founded in 2012 after 10 years
of experience of selling woodworking
machines.
The factory is a complete cycle
machine-building enterprise, equipped
with modern machinery.
Production facilities allow to produce
2000 machines per month
More than 100 people work at the
factory
There are 9 models of Belmash
machines different in functions, sizes
and power
“SDM” series
3. Today you can buy Belmash products in
Russia, Ukraine, Poland, Serbia, Lithuania,
Latvia, Estonia, Romania, Moldova
We work with such big companies like Leroy
Merlin, Kesko Senukai, Castorama, etc.
www.belmash.by“SDM” series
4. Belmash SDM is our flagship series.
This machine is perfect for processing all types of wood.
Main functions:
•Planing
•Angle planing
•Lengthwise and cross cutting
•Angle cutting and cross cutting
•Rebating
•Milling with disc and end cutters
•Drilling
www.belmash.by
“SDM” series
6. ENGINE
•Induction
•Working mode - S6-40%
•Compact and not heavy
•Increased starting torque
•Increased overall capacity
•Thermal protection to prevent
overheating
•Start and operation under
reduced voltage (from 180 V)
•No need for regular service
www.belmash.by“SDM” series
7. www.belmash.by
BELT DRIVE
Belmash belt drive is patented
Helps increase cutting depth
up to 117 mm* with smaller saw
blade
It provides optimal rotation speed
for planing and cutting
* for SDM-2500
“SDM” series
8. BELT TENSION
The belt’s tension is
provided by a special
spring
You don’t need to
control belt tension
www.belmash.by“SDM” series
9. www.belmash.by
SWITCH
On/off button is located
on a special console that
can be moved into
different sides to help
easily switch machine off
during any operation.
“SDM” series
13. CUTTING*
Cutting depth – 117 mm
Working table – 872x532 mm
Rated idle RPM – 2850
Saw blade – 315 mm
Mounting bore of saw blade – 30Ø
Angle cutting
Angle crosscutting
Cutting depth adjustment
www.belmash.by
* for SDM-2500
“SDM” series
14. ANGLE
CUTTING
You can cut at any angle up
to 45° with the help of a
special ruler that is included
in a standard shipping set.
www.belmash.by“SDM” series
16. PLANING*
Planing width – 270 mm
Planing depth – 3 mm
Working table – 900x287 mm
Rated idle RPM – 7700
Range of planing angles – 0-45°
Angle planing possible
www.belmash.by
* for SDM-2500
“SDM” series
17. DISC CUTTER
MILLING*
Milling disc - 125Ø
Mounting bore of milling disc – 30Ø
Working table – 900x287 mm
Rated idle RPM – 2850
www.belmash.by
* for SDM-2500
“SDM” series
18. DRILLING AND
MILLING WITH
END CUTTERS
Milling device included in
standard shipping set gives
additional options: drilling and
end milling
www.belmash.by“SDM” series
19. SAFETY
For safety reasons
SDM-machine is equipped with
a locking device - when cutting
the planing function is not
available and vice versa.
www.belmash.by“SDM” series
20. USEFUL
ACCESORIES
We offer additional useful
accessories to SDM machine that
are not included in standard
shipping set:
1. Thicknessing device
2. Side clamp
3. Milling device
4. Open stand
5. Open wheel stand
6. Table top
www.belmash.by
1
2
3
4
5
6
“SDM” series
21. www.belmash.by
Max. planing width per pass, mm 230 250 270
Range of planing depth per pass, mm 0÷3 0÷3 0÷3
Range of cutting depth per pass, mm 0÷85 0÷100 0÷117
Range of longitudinal cutting angles and planing with the use of a ruler,
degrees
0÷45 0÷45 0÷45
Range of cross cutting angles with the use of a device, degrees -45÷45 -45÷45 -45÷45
Cutting table size, mm 732×456 802×492 872×532
Planing table size, mm 760×247 830×267 900×287
Drilling/milling table size, mm 470×190 470×190 470×190
Rated idle RPM of knife’s block and end cutter,/
saw blade and disc cutter, min-1
7700/2850 7700/2850 7700/2850
Motor type Induction S6-40% Induction S6-40% Induction S6-40%
Rated consumed power, W 2000 2200 2500
Rated voltage, V/ frequency, Hz 230/50 230/50 230/50
Saw blade, mm 250 280 315
Disc cutter, mm 125 125 125
Mounting bore of disc cutter/saw blade, mm 30/30 30/30 30/30
Weight of machine including devices (net/gross), kg 52/55 64/67 73/76
Overall dimensions of the assembled machine, mm 910×794×445 995×830×460 1078×850×512
BELMASH
SDM-2000
BELMASH
SDM-2200
BELMASH
SDM-2500
TECHNICAL
PARAMETERS
“SDM” series