We are a Partnership firm. The services offered by us are precisely formulated by making use of highest quality chemical compounds and progressive techniques in tandem with industrial quality standards.

2.  We have multi-color powder coating unit in Chakan
industrial area.
 Our Firm is a Partnership Firm and it consists of :-
1. Mr. Ajay D. Lipare (Operational & Marketing Head)
2. Mr. Mayur V. Awasarkar (Administrative Head)

3. 1. Our Plant:-
Location:- Our plant is situated at Chakan
industrial area. It comes under Kharabwadi Grampanchayat
and is easy for transportation from Talegaon-Chakan
chowk(3 Km), Mhalunge Circle(3Km), Mercedes
chowk(6Km), Bhosari MIDC(20Km)

5. 2 .Shade Area:- Our shade has a width of 60feet,
length of 72 feet and height of 25 feet which is
sufficient for powder coating unit. We have separate
space for incoming and outgoing material

8. Front view of our plant

9. 3. Pretretment Process :-
We have 7 Tank process
Multicolor Powder coating machinery. In Which we
have 3 ton capacity crane for pretreatment process.
All machinery details are as above.

10. Technical Specifications :-
Pretreatment Tank Specifications :-
Overall Dimesions : 2500 x 940 x 1200 (W x D x H) mm.
Number of tanks : 8 Nos. All M.S.
Tank inside clear dim : 2450 x 900 x 1150 ( L x D x H)mm.
Tank Capacity : 3,000 Litre. approx. each.
Material Handling : Hoist along with structure & rails.

12. Technical Specifications
Powder Coating Booth :-
Type : Batch type Powder Coating Booth.
Overall Dimensions : 1830 x 1520 x 2135( L x D x H ) mm.
Number of Booths : 2 Nos.
Blower : 3000 mtr. cu. per Hr.
Motor : 3 H.P., 2880 R.P.M., 3 ph

15. Technical Specifications :-
Powder Curing Oven - 1:-
Type : Batch type Gas fired Oven.
Overall Dimensions : 3410 x 2440 x 2470 (L x W x H) mm
Heat Source : Gas (LPG )
Blower Motor : 3 HP .
Max. temperature : 200 deg. Operating (250 deg cel. Max)

17. Technical Specifications :-
Powder Curing Oven - 2:-
Type : Batch type Gas fired Oven.
Overall Dimensions : 6000 x 1850 x 1850 ( Inside Clear ) (L x W x H) mm
Heat Source : Gas (LPG )
Blower Motor : 3 HP 2 Nos.
Max. temperature : 200 deg. Operating (250 deg cel. Max)

19. 4. Services:-
We are well known about customer requirements from a powder
coating supplier, that’s why we keep our service in time. Also we have sufficient and
skilled man power which help us to provide best service.
5. Quality:-
We are very Careful about Powder Coating Quality for that we
have appointed a Production & Quality person for maintaining coating quality. We
have arranged separate area for laboratory. We have purchased powder and pretreatment
chemical from well known sources . Every lot will be checked by Cross-Cut test by
special 2 mm cross cutter with adhesion tape . Every six months we will conduct Salt-
Spray test and we also have DFT meter ,Gloss meter & Pencil Hardener Test also.

24. Damler Chassis Part

25. Multi – Color Coating
Plain White RAL - 9011

26. Olivo Green For Defens RAL – 7035 for Parking Strcuture

27. Process Chart
Material Inward
Material Deep in
Pretreatment tank for
pre cleaning before
coating.
After Pretreatment,
clean job by red scrub
pad & polish paper to
get better surface for
coating.
Hang job by hook in
powder coating booth
& spray powder on it
by electro magnetic
Gun.
Hang coated job’s in
trolly.
Push trolly in Oven
and keep it in under
190 degree for 10 min.
After completed
curing time, pull trolly
from oven & unload
jobs when it comes
normal temperature.
Check every job by
quality person and
Dispatch it to
Customer.

28. We Work for TATA, Mahindra, JCB , Lumax, Daimler, CNH &
Man Truck as a Third Party. ( Our customer is Direct
Vendor of this all companies )
We also work for some MNC Companies like below,
1. DAIM Display India Pvt. Ltd.
2. Martin Engineering Pvt. Ltd.
3. Alstom
4. Suzlon India Pvt. Ltd.
We also going to conduct audit for approval JCB India Pvt. Ltd.

29. 1. We have get approval from Suzlon India Pvt. Ltd. ( from Ultra
Engineering )
2. We also have approval from DAIM Display India Pvt. Ltd.
3. We have passed ISO 9001-2015 Audit Successfully and get
Certified.
4. We have passed Salt Spray Test Report From NABL approval
Lab With 700 Hrs.
5. We have DFT Meter for Measuring DFT , Gloss meter for
Measuring Gloss level & Adhesion Cutter with Adhesion
Tape for checking coating life & quality. All instruments
Calibration Certificates.

30. Mr. Ajay D.
Lipare(Operational
Head)
Production Head
Coatars and
Labours
Quality Head
Quality Inspection
Person
Mr. Mayur V.
Awasarkar
(Administrative
Head)
Account Executive
Our team is organized accordingly to everybody's personal skill due to
which the company will be in profit and its customer would be satisfied.

31. • Customer should be satisfied by their given
Requirements.
•Zero Base Rejection.
•Being a First preference of each customer.
• Maintaining a good and Healthy relationship with
Clients.
•Being a well-known company in Coating Industry.