Station Hub is an interconnection system used in Clyde Synergy RS Radio Station Packages. It connects one or two Control Rooms with the CTA (Central Technical Area) and optionally to a Talks Studio. The system makes use of industry standard CAT5 structured cabling for inter-area connections, which simply plug into the Station Hub Interface Units.

1. STATION HUB
Station Hub is an interconnection system used in Clyde Synergy RS Radio Station Packages. It connects one or two
Control Rooms with the CTA (Central Technical Area) and optionally to a Talks Studio.
The system makes use of industry standard CAT5 structured cabling for inter-area connections, which simply plug into the
Station Hub Interface Units.
The most common RS Package configurations are shown below:
CTA
Synergy
Silver
(Main On Air Studio)
Synergy
Bronze
(Production/Back-up
On Air Studio)
Station
output
Talks Studio
(optional)
CTA
Synergy
Silver
(Main On Air Studio)
Synergy
Bronze
(Production/Back-up
On Air Studio)
Station
output
Talks Studio
SYNERGY RS2 and RS2+ SYNERGY RS3
CTA
Synergy
Bronze
(On Air/Production
Studio)
GP/NEWS
Workstation
(and emergency
broadcast)
SYNERGY RS1
Station
output
GP/NEWS
Workstation
SO EASY RADIO
Station Package
STATION HUB
There are three Station Hub Interface Units, for use in a Control
Room (Studio), Talks Studio and CTA.
The Control Room Interface incorporates both balanced and
unbalanced front panel inputs to Synergy’s MPU, as well as tie-lines
from the CTA. A Lumion controller interface allows direct
connection of a Mic Live Indicator Panel.
The front of the CTA Interface incorporates a number of pairs of
balanced jacks, arranged as a patch-panel, providing access to
key points in the audio signal chain, as well as tie-lines to control
rooms.
The Talks Studio Interface allows connection of four studio mics,
Guest Remote Control Units and studio speaker outputs, from
the Synergy MPU. A Lumion controller interface allows direct
connection of a Mic Live Indicator Panel. In the RS3 package,
two interfaces are required, so that the Talks Studio may work
with either control room.

2. SID SID
Synergy PC
Synergy MPU
Local
inputs
Local
outputs
Control Room
CP
Talks Studio
CP 1
Synergy
Synergy PC
Synergy MPU
Local
inputs
Local
outputs
Control Room
CP
CTA HUB
TSM2
Talks Studio
CP 2
Studio
Mics*
Studio
Monitoring and
Indicators*
Synergy
STATION OUTPUT
To Transmission Chain
Off Air Rx
Standby audio
source
Logger
Sustaining
Service
Off Air Rx, Sustaining Service,
CR1 and CR2 Prog. Outputs to
News Workstation.
Control Room 1 Control Room 2
SID SID
Control Room 1
Control Room 2
Talks Studio
CTA
Local
connection
Inter-area
connection
KEY
Clyde Broadcast
STATION HUB
Connectivity
*Talks Studio Mics, Monitoring
and Indicators are manually
patched into appropriate
Connector Panel (CP)
patched
SID
Studio Indicator
Display
Clyde Broadcast Products Ltd
3 South Avenue, Clydebank Business Park, Clydebank, G81 2RX, Scotland , UK.
Phone: + 44 141 952 7950 Mail: sales@clydebroadcast.com
www.clydebroadcast.com