Mais conteúdo relacionado Semelhante a Ccna4 cs diaz_&_romero (20) Ccna4 cs diaz_&_romero1. TECNOLOGIA DE REDES:
DOCENTE: Jorge Luis Arroyo Tirado
Alumnos:
1) Díaz Pereyra Luis Manuel Enrique
2) Romero Cahuana Natalie Ruby
SITUACIÓN
Descarga aquí
FASE 1: DIRECCIONAMIENTO DE LA WAN
Nombre Interfaz Máscara de subred
Limerick S0 172.16.255.245/30 255.255.255.252
Cork E1 Cork E1.1 172.16.0.1/24 255.255.255.0
Cork E1.2 172.16.1.1/24 255.255.255.0
Cork E1.3 172.16.2.1/24 255.255.255.0
Cork S0 172.16.255.254/30 255.255.255.252
Cork S1 172.16.255.250/30 255.255.255.252
Galway E0 172.16.4.1/22 255.255.252.0
Galway S0 172.16.255.253/30 255.255.255.252
Belfast E0 10.0.0.1/8 255.0.0.0
Belfast S0 172.16.255.249/30 255.255.255.252
Belfast S1 172.16.255.246/30 255.255.255.252
Nombre Conjunto de direcciones
Conjunto DHCP de
Galway
172.16.4.0/22, excepto 172.16.0.1(E0)
LAN de Cork 172.16.0.0/22
2. TECNOLOGIA DE REDES:
DOCENTE: Jorge Luis Arroyo Tirado
Alumnos:
1) Díaz Pereyra Luis Manuel Enrique
2) Romero Cahuana Natalie Ruby
FASE 2: CONFIGURACIÓN DE LOS ROUTERS Y OSPF
Configuraciones:
Limerick
Router # configure terminal
Router(config) # hostname Limerick
Limerick (config) # line console 0
Limerick (config – line) # password cisco
Limerick (config – line) # login
Limerick (config) # enable secret cisco
Limerick (config) # interface serial0/1
Limerick (config – if) # ip address 172.16.255.245 255.255.255.252
Limerick (config – if) # clock rate 64000
Limerick (config – if) # no shutdown
Limerick (config) # router ospf 1
Limerick (config - router) # network 172.16.255.244 0.0.0.3 area 0
Cork
Router # configure terminal
Router(config) # hostname Cork
Cork (config) # line console 0
Cork (config – line) # password cisco
Cork (config – line) # login
Cork (config) # enable secret cisco
Cork (config) # interface serial1/1
Cork (config –if) # ip address 172.16.255.250 255.255.255.252
Cork (config –if) # no shutdown
Cork (config) # interface FastEthernet 0/1
Cork (config - if) # no shutdown
Cork (config - if) # interface FastEthernet 0/1.1
Cork (config - subif) # encapsulation dot1q 1
Cork (config - subif) # ip address 172.16.0.1 255.255.255.0
Cork (config –subif) # no shutdown
Cork (config - subif) # interface FastEthernet 0/1.2
Cork (config - subif) # encapsulation dot1q 2
Cork (config - subif) # ip address 172.16.1.1 255.255.255.0
Cork (config –subif) # no shutdown
Cork (config - subif) # interface FastEthernet 0/1.3
Cork (config - subif) # encapsulation dot1q 3
Cork (config - subif) # ip address 172.16.2.1 255.255.255.0
Cork (config –subif) # no shutdown
Cork (config) # router ospf 1
Cork (config - router) # network 172.16.0.0 0.0.0.255 area 0
Cork (config - router) # network 172.16.1.0 0.0.0.255 area 0
Cork (config - router) # network 172.16.2.0 0.0.0.255 area 0
Cork (config - router) # network 172.16.255.248 0.0.0.3 area 0
Cork (config - router) # network 172.16.255.252 0.0.0.3 area 0
3. TECNOLOGIA DE REDES:
DOCENTE: Jorge Luis Arroyo Tirado
Alumnos:
1) Díaz Pereyra Luis Manuel Enrique
2) Romero Cahuana Natalie Ruby
Cork (config – router) # redistribute rip subnets
Cork (config) # router rip
Cork (config - router) # version 2
Cork (config - router) # network 172.16.0.0
Cork (config - router) # redistribute ospf 1
Belfast
Router # configure terminal
Router(config) # hostname Belfast
Belfast (config) # line console 0
Belfast (config – line) # password cisco
Belfast (config – line) # login
Belfast (config) # enable secret cisco
Belfast (config) # interface serial 1/0
Belfast (config – if) # ip address 172.16.255.249 255.255.255.252
Belfast (config – if) # clock rate 64000
Belfast (config – if) # no shutdown
Belfast (config) # interface serial 1/1
Belfast (config – if) # ip address 172.16.255.246 255.255.255.252
Belfast (config – if) # no shutdown
Belfast (config) # router ospf 1
Belfast (config – router) # network 10.0.0.0 0.255.255.255 area 0
Belfast (config – router) # network 172.16.255.244 0.0.0.3 area 0
Belfast (config – router) # network 172.16.255.248 0.0.0.3 area 0
Belfast (config) # ip route 0.0.0.0 0.0.0.0 10.0.0.2
Belfast (config) # router ospf 1
Belfast (config – router) # default-information originate
Belfast (config – router) # redistribute static
Galway
Router # configure terminal
Router(config) # hostname Galway
Galway (config) # line console 0
Galway (config – line) # password cisco
Galway (config – line) # login
Galway (config) # enable secret cisco
Galway (config) # interface serial 1/0
Galway (config - if) # ip address 172.16.255.253 255.255.255.252
Galway (config - if) # no shutdown
Galway (config) # interface FastEthernet 0/0
Galway (config - if) # ip address 172.16.4.1 255.255.252.0
Galway (config - if) # no shutdown
Galway (config) # router rip
Galway (config - router) # version 2
Galway (config - router) # network 172.16.0.0
4. TECNOLOGIA DE REDES:
DOCENTE: Jorge Luis Arroyo Tirado
Alumnos:
1) Díaz Pereyra Luis Manuel Enrique
2) Romero Cahuana Natalie Ruby
FASE 3: CONFIGURACIÓN DE NAT, SIMULACIÓN DE FRAME RELAY Y ACL
Belfast (config) # ip nat pool Belfastpool 192.168.1.6 192.168.1.6 netmask 255.255.255.252
Belfast (config) # access-list 1 permit 172.16.0.0 0.0.255.255
Belfast (config) # ip nat inside source list 1 pool Belfastpool overload
Belfast (config) # interface serial 1/0
Belfsat (config – if) # ip nat inside
Belfast (config) # interface serial 1/1
Belfsat (config – if) # ip nat inside
Belfast (config) # interface FastEthernet 0/0
Belfsat (config – if) # ip nat outside
Belfast (config) # ip nat translation timeout 120
Configuración para Frame Relay
Cork (config) # interface serial 1/0
Cork (config - if) # no ip address 172.16.255.254 255.255.255.252
Cork (config - if) # encapsulation frame-relay
Cork (config – if) # frame-relay intf-type dte
Cork (config – if) # frame-relay lmi-type cisco
Cork (config – if) # interface FastEthernet0/1.1
Cork (config – subif) # ip address 172.16.255.254 255.255.255.252
Cork (config – subif) # frame-relay interface-dlci 100
Cork (config – fr-dlci) # exit
Cork (config – subif) # no shutdown
Galway (config) # interface serial 1/0
Galway (config - if) # no ip address 172.16.255.253 255.255.255.252
Galway (config - if) # encapsulation frame-relay
Galway (config – if) # frame-relay intf-type dte
Galway (config – if) # frame-relay lmi-type cisco
Galway (config – if) # interface FastEthernet0/1.1
Galway (config – subif) # ip address 172.16.255.253 255.255.255.252
Galway (config – subif) # frame-relay interface-dlci 200
Galway (config – fr-dlci) # exit
Galway (config – subif) # no shutdown
‘Switch Frame Relay’
Escenario:
Cork S0 dlci100 S0 Router S1 dlci200 S0 Galway
Router(config) # frame-relay switching
Router(config) # interface serial 1/0
Router(config - if) # clock rate 64000
Router(config - if) # encapsulation frame-relay
Router(config - if) # frame-relay intf-type dce
Router(config - if) # frame-relay lmi-type cisco
Router (config – if) # frame-relay route 100 interface serial 1 200
Router (config – if) # no shutdown
5. TECNOLOGIA DE REDES:
DOCENTE: Jorge Luis Arroyo Tirado
Alumnos:
1) Díaz Pereyra Luis Manuel Enrique
2) Romero Cahuana Natalie Ruby
Router (config) # interface serial 1
Router(config - if) # clock rate 64000
Router(config - if) # encapsulation frame-relay
Router(config - if) # frame-relay intf-type dce
Router(config - if) # frame-relay lmi-type cisco
Router (config – if) # frame-relay route 200 interface serial 0 100
Router (config – if) # no shutdown
Belfast (config) # access-list 105 permit tcp 172.16.4.0 0.0.0.3.255
any eq 80
Belfast (config) # access-list 105 permit ip 172.16.0.0 0.0.3.255 any
Belfast (config) # interface Ethernet 0
Belfast (config – if) # ip access-group 105 in
Elemento Valores de Configuración
Belfast nombre del conjunto NAT Belfastpool
Belfast: Número de ACL 1
Número ACL para el filtrado ACL del tráfico 105
Router para el filtrado ACL del tráfico de LAN de Galway Belfast
Puerto configurado para el filtrado ACL del tráfico de LAN de
Galway
Ethernet 0
Dirección configurada para el filtrado ACL del tráfico del LAN
de Galway
In
Dirección IP del servidor ISP 10.0.0.2
Máscara de subred del servidor ISP 255.0.0.0
Gateway por defecto del servidor ISP 10.0.0.1 ó 10.0.0.3 hasta 10.255.255.254
Nombre de archivo de la página web en el servidor ISP (incluye
la ruta)
c:…htdocsindex.html
FASE 4: CONFIGURACION DE VLAN Y DHCP
Switch # vlan database
Switch (vlan) # vlan 1 name VLAN1
Switch (vlan) # vlan 2 name VLAN2
Switch (vlan) # vlan 3 name VLAN3
Switch (config) # interface Ethernet 0/1
6. TECNOLOGIA DE REDES:
DOCENTE: Jorge Luis Arroyo Tirado
Alumnos:
1) Díaz Pereyra Luis Manuel Enrique
2) Romero Cahuana Natalie Ruby
Switch (config – if) # switchport access vlan 1
Swithc (config – if) # switchport mode trunk
Swithc (config – if) # switchport trunk encapsulation
Switch (config) # interface Ethernet 0/2
Switch (config – if) # switchport access vlan 1
Switch (config) # interface Ethernet 0/3
Switch (config – if) # switchport access vlan 1
Switch (config) # interface Ethernet 0/4
Switch (config – if) # switchport access vlan 1
Switch (config) # interface Ethernet 0/5
Switch (config – if) # switchport access vlan 2
Switch (config) # interface Ethernet 0/6
Switch (config – if) # switchport access vlan 2
Switch (config) # interface Ethernet 0/7
Switch (config – if) # switchport access vlan 2
Switch (config) # interface Ethernet 0/8
Switch (config – if) # switchport access vlan 2
Switch (config) # interface Ethernet 0/9
Switch (config – if) # switchport access vlan 3
Switch (config) # interface Ethernet 0/10
Switch (config – if) # switchport access vlan 3
Switch (config) # interface Ethernet 0/11
Switch (config – if) # switchport access vlan 3
Switch (config) # interface Ethernet 0/12
Switch (config – if) # switchport access vlan 3
DHCP
Galway (config) # ip dhcp pool DHCPpool
Galway (dhcp - config) # network 172.16.4.0 255.255.252.0
Galway (config) # ip dhcp excluded-address 172.16.4.1
Galway (config) #ip dhcp pool DHCPpool
Galway (dhcp – config) # default-router 172.16.4.1
Galway (dhcp – config) # dns-server 200.41.96.24 200.41.96.26