The document provides technical data and specifications for drill pipe assemblies, including dimensions, material properties, and performance metrics for the pipe body, tool joints, and complete drill pipe strings. Tables list measurements and ratings for different pipe sizes, materials, and configurations. The document aims to support reference and selection of drill pipe options but notes that accuracy cannot be guaranteed and no warranties are made regarding results from using the data.

1. 44 © Grant Prideco. All rights reserved. December 2003
G R A N T P R I D E C O
Drill pipe data tables
The following tables provide data for the drill string.
Data are given for the pipe body, tool joint, and drill pipe
assembly.
The tool joint sizes displayed represent common O.D.
and I.D. configurations, although additional size com-
binations are available.
2 3/8 6.65 E-75 EU 6,300 138,200 0.280 1.815 1.843 0.867 1.733 15,474 15,599
6.65 E-75 EU 6,300 138,200 0.280 1.815 1.843 0.867 1.733 15,474 15,599
6.65 E-75 EU 6,300 138,200 0.280 1.815 1.843 0.867 1.733 15,474 15,599
2 3/8 6.65 X-95 EU 7,900 175,100 0.280 1.815 1.843 0.867 1.733 19,600 19,759
6.65 X-95 EU 7,900 175,100 0.280 1.815 1.843 0.867 1.733 19,600 19,759
6.65 X-95 EU 7,900 175,100 0.280 1.815 1.843 0.867 1.733 19,600 19,759
2 3/8 6.65 G-105 EU 8,800 193,500 0.280 1.815 1.843 0.867 1.733 21,663 21,839
6.65 G-105 EU 8,800 193,500 0.280 1.815 1.843 0.867 1.733 21,663 21,839
6.65 G-105 EU 8,800 193,500 0.280 1.815 1.843 0.867 1.733 21,663 21,839
2 3/8 6.65 S-135 EU 11,300 248,800 0.280 1.815 1.843 0.867 1.733 27,853 28,079
6.65 S-135 EU 11,300 248,800 0.280 1.815 1.843 0.867 1.733 27,853 28,079
6.65 S-135 EU 11,300 248,800 0.280 1.815 1.843 0.867 1.733 27,853 28,079
6.65 S-135 EU 11,300 248,800 0.280 1.815 1.843 0.867 1.733 27,853 28,079
2 3/8 6.65 Z-140 EU 11,700 258,000 0.280 1.815 1.843 0.867 1.733 28,884 29,119
6.65 Z-140 EU 11,700 258,000 0.280 1.815 1.843 0.867 1.733 28,884 29,119
6.65 Z-140 EU 11,700 258,000 0.280 1.815 1.843 0.867 1.733 28,884 29,119
6.65 Z-140 EU 11,700 258,000 0.280 1.815 1.843 0.867 1.733 28,884 29,119
2 3/8 6.65 V-150 EU 12,500 276,400 0.280 1.815 1.843 0.867 1.733 30,947 31,199
6.65 V-150 EU 12,500 276,400 0.280 1.815 1.843 0.867 1.733 30,947 31,199
6.65 V-150 EU 12,500 276,400 0.280 1.815 1.843 0.867 1.733 30,947 31,199
6.65 V-150 EU 12,500 276,400 0.280 1.815 1.843 0.867 1.733 30,947 31,199
2 7/8 6.85 E-75 IU 8,100 135,900 0.217 2.441 1.812 1.121 2.241 9,907 10,467
6.85 E-75 IU 8,100 135,900 0.217 2.441 1.812 1.121 2.241 9,907 10,467
6.85 E-75 EU 8,100 135,900 0.217 2.441 1.812 1.121 2.241 9,907 10,467
6.65 E-75 IU 8,100 135,900 0.217 2.441 1.812 1.121 2.241 9,907 10,467
6.85 E-75 EU 8,100 135,900 0.217 2.441 1.812 1.121 2.241 9,907 10,467
6.85 E-75 EU 8,100 135,900 0.217 2.441 1.812 1.121 2.241 9,907 10,467
2 7/8 6.85 X-95 IU 10,200 172,100 0.217 2.441 1.812 1.121 2.241 12,548 12,940
6.85 X-95 IU 10,200 172,100 0.217 2.441 1.812 1.121 2.241 12,548 12,940
6.85 X-95 EU 10,200 172,100 0.217 2.441 1.812 1.121 2.241 12,548 12,940
6.65 X-95 IU 10,200 172,100 0.217 2.441 1.812 1.121 2.241 12,548 12,940
6.85 X-95 EU 10,200 172,100 0.217 2.441 1.812 1.121 2.241 12,548 12,940
6.85 X-95 EU 10,200 172,100 0.217 2.441 1.812 1.121 2.241 12,548 12,940
2 7/8 6.85 G-105 IU 11,300 190,300 0.217 2.441 1.812 1.121 2.241 13,869 14,020
6.85 G-105 IU 11,300 190,300 0.217 2.441 1.812 1.121 2.241 13,869 14,020
6.85 G-105 EU 11,300 190,300 0.217 2.441 1.812 1.121 2.241 13,869 14,020
6.65 G-105 IU 11,300 190,300 0.217 2.441 1.812 1.121 2.241 13,869 14,020
6.85 G-105 EU 11,300 190,300 0.217 2.441 1.812 1.121 2.241 13,869 14,020
6.85 G-105 EU 11,300 190,300 0.217 2.441 1.812 1.121 2.241 13,869 14,020
2 7/8 6.85 S-135 IU 14,500 244,600 0.217 2.441 1.812 1.121 2.241 17,832 17,034
6.85 S-135 IU 14,500 244,600 0.217 2.441 1.812 1.121 2.241 17,832 17,034
6.85 S-135 EU 14,500 244,600 0.217 2.441 1.812 1.121 2.241 17,832 17,034
6.65 S-135 IU 14,500 244,600 0.217 2.441 1.812 1.121 2.241 17,832 17,034
6.85 S-135 EU 14,500 244,600 0.217 2.441 1.812 1.121 2.241 17,832 17,034
6.85 S-135 EU 14,500 244,600 0.217 2.441 1.812 1.121 2.241 17,832 17,034
Grade Pipe Body
and Torsional Tensile Pipe Body Pipe Body Polar
Size Nominal Upset Yield Yield Wall Nominal Section Section Section Internal Collapse
OD Weight Type Strength Strength Thickness ID Area Modulus Modulus Pressure Pressure
in. lb/ft ft-lb lb in. in. sq in. cu in. cu in. psi psi
Pipe Data
While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information
contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this
material. No expressed or implied warranty is intended.

2. 45© Grant Prideco. All rights reserved. December 2003
D R I L L pipe data ta b le s
*2” Longer than standard.
While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information
contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this
material. No expressed or implied warranty is intended.
Grant Prideco offers all API tool joint connections as well
as most non-API connections. Custom specifications and
special sizes can be provided to meet specific requirements.
The technical data are calculated per API RP7G Latest
Edition and API Spec 5D Latest Edition.
Tool Joint Data Assembly Data
Torsional Minimum
Torsional Tensile Ratio Pin Box Tool Joint
Connection Outside Inside Yield Yield Make-up Tool Joint Tong Tong Adjusted OD for Drift Displace- Size
Type Diameter Diameter Strength Strength Torque to Pipe Space Space Weight Prem. Class Diameter Capacity ment OD
in. in. ft-lb lb ft-lb in. in. lb/ft in. in. US gal/ft US gal/ft in.
* *
NC26 3 3/8 1 3/4 6,900 313,700 3,900 1.10 9 10 7.17 3 3/16 1 5/8 0.134 0.110 2 3/8
HT26 3 3/8 1 3/4 8,700 313,700 5,200 1.38 9 12 7.25 N/A 1 5/8 0.134 0.111
SLH90 3 1/4 1 13/16 6,900 270,200 3,700 1.10 9 10 7.00 3 1/32 1 11/16 0.134 0.107
NC26 3 3/8 1 3/4 6,900 313,700 3,900 0.87 9 10 7.17 3 1/4 1 5/8 0.134 0.110 2 3/8
HT26 3 3/8 1 3/4 8,700 313,700 5,200 1.10 9 12 7.25 N/A 1 5/8 0.134 0.111
SLH90 3 1/4 1 13/16 6,900 270,200 3,700 0.87 9 10 7.00 3 3/32 1 11/16 0.134 0.107
NC26 3 3/8 1 3/4 6,900 313,700 3,900 0.78 9 10 7.17 3 9/32 1 5/8 0.134 0.110 2 3/8
HT26 3 3/8 1 3/4 8,700 313,700 5,200 0.99 9 12 7.25 N/A 1 5/8 0.134 0.111
SLH90 3 1/4 1 13/16 6,900 270,200 3,700 0.78 9 10 7.00 3 1/8 1 11/16 0.134 0.107
NC26 3 5/8 1 1/2 9,000 390,300 4,900 0.80 9 10 7.62 3 13/32 1 3/8 0.132 0.117 2 3/8
HT26 3 3/8 1 5/8 9,500 353,400 5,700 0.84 9 12 7.35 N/A 1 1/2 0.133 0.112
SLH90 3 1/4 1 11/16 7,700 311,500 4,200 0.68 9 10 7.10 3 7/32 1 9/16 0.133 0.109
GPDS26 3 1/2 1 11/16 9,700 333,900 5,800 0.86 9 10 7.35 3 5/16 1 9/16 0.133 0.112
XT24 3 1/8 1 1/2 9,500 261,500 5,700 0.81 10 15 7.32 2 15/16 1 3/8 0.131 0.112 2 3/8
XT26 3 3/8 1 5/8 12,600 330,600 7,600 1.08 10 15 7.52 3 1/32 1 1/2 0.132 0.115
HT26 3 3/8 1 5/8 9,500 353,400 5,700 0.81 9 12 7.35 N/A 1 1/2 0.133 0.112
GPDS26 3 1/2 1 5/8 10,500 353,400 6,300 0.90 9 10 7.39 3 5/16 1 1/2 0.133 0.113
XT24 3 1/8 1 3/8 10,400 295,400 6,200 0.83 10 15 7.41 2 15/16 1 1/4 0.130 0.113 2 3/8
XT26 3 3/8 1 1/2 13,200 367,400 7,900 1.06 10 15 7.62 3 1 3/8 0.131 0.117
HT26 3 3/8 1 1/2 10,100 390,300 6,100 0.81 9 12 7.45 N/A 1 3/8 0.131 0.114
GPDS26 3 1/2 1 1/2 11,200 390,300 6,700 0.90 9 10 7.48 3 9/32 1 3/8 0.132 0.114
NC26 3 3/8 1 3/4 6,900 313,700 3,900 0.85 9 10 7.19 3 9/32 1 5/8 0.236 0.110 2 7/8
HT26 3 3/8 1 3/4 8,700 313,700 5,200 1.07 9 12 7.27 N/A 1 5/8 0.235 0.111
NC31 4 1/8 2 5/32 11,500 434,500 6,200 1.42 9 11 7.88 3 11/16 2 1/32 0.239 0.120
XT26 3 3/8 1 3/4 11,500 290,900 6,900 1.42 10 15 7.43 2 29/32 1 5/8 0.234 0.114
HT31 4 2 5/32 14,900 434,500 8,900 1.84 9 13 7.83 3 1/2 2 1/32 0.239 0.120
XT31 4 2 3/8 13,200 309,100 7,900 1.63 10 15 7.75 3 13/32 2 1/4 0.242 0.118
NC26 3 1/2 1 1/2 8,800 390,300 4,900 0.86 9 10 7.50 3 3/8 1 3/8 0.234 0.115 2 7/8
HT26 3 3/8 1 3/4 8,700 313,700 5,200 0.85 9 12 7.27 N/A 1 5/8 0.235 0.111
NC31 4 1/8 2 5/32 11,500 434,500 6,200 1.13 9 11 7.88 3 3/4 2 1/32 0.239 0.120
XT26 3 3/8 1 3/4 11,500 290,900 6,900 1.13 10 15 7.43 3 1/32 1 5/8 0.234 0.114
HT31 4 2 5/32 14,900 434,500 8,900 1.46 9 13 7.83 3 19/32 2 1/32 0.239 0.120
XT31 4 2 3/8 13,200 309,100 7,900 1.29 10 15 7.75 3 1/2 2 1/4 0.242 0.118
NC26 3 5/8 1 3/4 7,200 313,700 3,900 0.64 9 10 7.46 3 13/32 1 5/8 0.236 0.114 2 7/8
HT26 3 3/8 1 3/4 8,700 313,700 5,200 0.77 9 12 7.27 N/A 1 5/8 0.235 0.111
NC31 4 1/8 2 5/32 11,500 434,500 6,200 1.02 9 11 7.88 3 13/16 2 1/32 0.239 0.120
XT26 3 3/8 1 3/4 11,500 290,900 6,900 1.02 10 15 7.43 3 1/16 1 5/8 0.234 0.114
HT31 4 2 5/32 14,900 434,500 8,900 1.32 9 13 7.83 3 5/8 2 1/32 0.239 0.120
XT31 4 2 3/8 13,200 309,100 7,900 1.17 10 15 7.75 3 17/32 2 1/4 0.242 0.118
NC26 3 5/8 1 1/2 9,000 390,300 4,900 0.62 9 10 7.64 3 17/32 1 3/8 0.234 0.117 2 7/8
HT26 3 1/2 1 1/2 12,100 390,300 7,300 0.83 9 12 7.60 3 5/16 1 3/8 0.233 0.116
NC31 4 1/8 2 1/8 11,900 447,100 6,400 0.82 9 11 7.91 3 29/32 2 0.239 0.121
XT26 3 3/8 1 3/4 11,500 290,900 6,900 0.79 10 15 7.43 3 7/32 1 5/8 0.234 0.114
HT31 4 2 5/32 14,900 434,500 8,900 1.03 9 13 7.83 3 23/32 2 1/32 0.239 0.120
XT31 4 2 3/8 13,200 309,100 7,900 0.91 10 15 7.75 3 5/8 2 1/4 0.242 0.118

3. Grade Pipe Body
and Torsional Tensile Pipe Body Pipe Body Polar
Size Nominal Upset Yield Yield Wall Nominal Section Section Section Internal Collapse
OD Weight Type Strength Strength Thickness ID Area Modulus Modulus Pressure Pressure
in. lb/ft ft-lb lb in. in. sq in. cu in. cu in. psi psi
Pipe Data
46 © Grant Prideco. All rights reserved. December 2003
G R A N T P R I D E C O
Drill pipe data tables
While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information
contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this
material. No expressed or implied warranty is intended.
2 7/8 6.85 Z-140 IU 15,100 253,700 0.217 2.441 1.812 1.121 2.241 18,492 17,500
6.65 Z-140 IU 15,100 253,700 0.217 2.441 1.812 1.121 2.241 18,492 17,500
6.85 Z-140 EU 15,100 253,700 0.217 2.441 1.812 1.121 2.241 18,492 17,500
6.85 Z-140 EU 15,100 253,700 0.217 2.441 1.812 1.121 2.241 18,492 17,500
2 7/8 6.85 V-150 IU 16,200 271,800 0.217 2.441 1.812 1.121 2.241 19,813 18,398
6.65 V-150 IU 16,200 271,800 0.217 2.441 1.812 1.121 2.241 19,813 18,398
6.85 V-150 EU 16,200 271,800 0.217 2.441 1.812 1.121 2.241 19,813 18,398
6.85 V-150 EU 16,200 271,800 0.217 2.441 1.812 1.121 2.241 19,813 18,398
2 7/8 10.40 E-75 EU 11,600 214,300 0.362 2.151 2.858 1.602 3.204 16,526 16,509
10.40 E-75 EU 11,600 214,300 0.362 2.151 2.858 1.602 3.204 16,526 16,509
10.40 E-75 EU 11,600 214,300 0.362 2.151 2.858 1.602 3.204 16,526 16,509
10.40 E-75 IU 11,600 214,300 0.362 2.151 2.858 1.602 3.204 16,526 16,509
10.40 E-75 EU 11,600 214,300 0.362 2.151 2.858 1.602 3.204 16,526 16,509
10.40 E-75 IU 11,600 214,300 0.362 2.151 2.858 1.602 3.204 16,526 16,509
10.40 E-75 EU 11,600 214,300 0.362 2.151 2.858 1.602 3.204 16,526 16,509
2 7/8 10.40 X-95 EU 14,600 271,500 0.362 2.151 2.858 1.602 3.204 20,933 20,911
10.40 X-95 IU 14,600 271,500 0.362 2.151 2.858 1.602 3.204 20,933 20,911
10.40 X-95 EU 14,600 271,500 0.362 2.151 2.858 1.602 3.204 20,933 20,911
10.40 X-95 IU 14,600 271,500 0.362 2.151 2.858 1.602 3.204 20,933 20,911
10.40 X-95 EU 14,600 271,500 0.362 2.151 2.858 1.602 3.204 20,933 20,911
10.40 X-95 IU 14,600 271,500 0.362 2.151 2.858 1.602 3.204 20,933 20,911
10.40 X-95 EU 14,600 271,500 0.362 2.151 2.858 1.602 3.204 20,933 20,911
2 7/8 10.40 G-105 EU 16,200 300,100 0.362 2.151 2.858 1.602 3.204 23,137 23,112
10.40 G-105 IU 16,200 300,100 0.362 2.151 2.858 1.602 3.204 23,137 23,112
10.40 G-105 EU 16,200 300,100 0.362 2.151 2.858 1.602 3.204 23,137 23,112
10.40 G-105 IU 16,200 300,100 0.362 2.151 2.858 1.602 3.204 23,137 23,112
10.40 G-105 EU 16,200 300,100 0.362 2.151 2.858 1.602 3.204 23,137 23,112
10.40 G-105 IU 16,200 300,100 0.362 2.151 2.858 1.602 3.204 23,137 23,112
10.40 G-105 EU 16,200 300,100 0.362 2.151 2.858 1.602 3.204 23,137 23,112
2 7/8 10.40 S-135 EU 20,800 385,800 0.362 2.151 2.858 1.602 3.204 29,747 29,716
10.40 S-135 IU 20,800 385,800 0.362 2.151 2.858 1.602 3.204 29,747 29,716
10.40 S-135 EU 20,800 385,800 0.362 2.151 2.858 1.602 3.204 29,747 29,716
10.40 S-135 IU 20,800 385,800 0.362 2.151 2.858 1.602 3.204 29,747 29,716
10.40 S-135 EU 20,800 385,800 0.362 2.151 2.858 1.602 3.204 29,747 29,716
10.40 S-135 IU 20,800 385,800 0.362 2.151 2.858 1.602 3.204 29,747 29,716
10.40 S-135 EU 20,800 385,800 0.362 2.151 2.858 1.602 3.204 29,747 29,716
10.40 S-135 EU 20,800 385,800 0.362 2.151 2.858 1.602 3.204 29,747 29,716
2 7/8 10.40 Z-140 IU 21,600 400,100 0.362 2.151 2.858 1.602 3.204 30,849 30,817
10.40 Z-140 EU 21,600 400,100 0.362 2.151 2.858 1.602 3.204 30,849 30,817
10.40 Z-140 IU 21,600 400,100 0.362 2.151 2.858 1.602 3.204 30,849 30,817
10.40 Z-140 EU 21,600 400,100 0.362 2.151 2.858 1.602 3.204 30,849 30,817
10.40 Z-140 EU 21,600 400,100 0.362 2.151 2.858 1.602 3.204 30,849 30,817
2 7/8 10.40 V-150 IU 23,100 428,700 0.362 2.151 2.858 1.602 3.204 33,052 33,018
10.40 V-150 EU 23,100 428,700 0.362 2.151 2.858 1.602 3.204 33,052 33,018
10.40 V-150 IU 23,100 428,700 0.362 2.151 2.858 1.602 3.204 33,052 33,018
10.40 V-150 EU 23,100 428,700 0.362 2.151 2.858 1.602 3.204 33,052 33,018
10.40 V-150 EU 23,100 428,700 0.362 2.151 2.858 1.602 3.204 33,052 33,018

4. Tool Joint Data Assembly Data
Torsional Minimum
Torsional Tensile Ratio Pin Box Tool Joint
Connection Outside Inside Yield Yield Make-up Tool Joint Tong Tong Adjusted OD for Drift Displace- Size
Type Diameter Diameter Strength Strength Torque to Pipe Space Space Weight Prem. Class Diameter Capacity ment OD
in. in. ft-lb lb ft-lb in. in. lb/ft in. in. US gal/ft US gal/ft in.
* *
47© Grant Prideco. All rights reserved. December 2003
D R I L L pipe data ta b le s
*2” Longer than standard.
While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information
contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this
material. No expressed or implied warranty is intended.
HT26 3 1/2 1 1/2 12,100 390,300 7,300 0.80 9 12 7.60 3 11/32 1 3/8 0.233 0.116 2 7/8
XT26 3 3/8 1 3/4 11,500 290,900 6,900 0.76 10 15 7.43 3 1/4 1 5/8 0.234 0.114
HT31 4 2 5/32 14,900 434,500 8,900 0.99 9 13 7.83 3 3/4 2 1/32 0.239 0.120
XT31 4 2 3/8 13,200 309,100 7,900 0.87 10 15 7.75 3 21/32 2 1/4 0.242 0.118
HT26 3 1/2 1 1/2 12,100 390,300 7,300 0.75 9 12 7.60 3 3/8 1 3/8 0.233 0.116 2 7/8
XT26 3 3/8 1 3/4 11,500 290,900 6,900 0.71 10 15 7.43 3 9/32 1 5/8 0.234 0.114
HT31 4 2 5/32 14,900 434,500 8,900 0.92 9 13 7.83 3 25/32 2 1/32 0.239 0.120
XT31 4 2 3/8 13,200 309,100 7,900 0.81 10 15 7.75 3 11/16 2 1/4 0.242 0.118
NC31 4 1/8 2 1/8 11,500 447,100 6,400 1.03 9 11 11.14 3 13/16 2 0.188 0.170 2 7/8
NC26 3 1/2 1 1/2 8,800 390,300 4,900 0.76 9 10 10.79 3 13/32 1 3/8 0.183 0.165
SLH90 3 7/8 2 13,100 444,000 6,900 1.13 9 11 10.95 3 19/32 1 7/8 0.187 0.168
HT26 3 1/2 1 1/2 12,100 390,300 7,300 1.04 9 12 10.85 3 3/16 1 3/8 0.182 0.166
HT31 4 1/8 2 1/8 16,600 447,100 10,000 1.43 9 13 11.26 3 19/32 2 0.188 0.172
XT26 3 1/2 1 1/2 14,800 367,400 8,900 1.28 10 15 11.02 2 31/32 1 3/8 0.181 0.168
XT31 3 7/8 2 1/8 16,600 415,100 10,000 1.43 10 15 11.06 3 3/8 2 0.188 0.169
NC31 4 1/8 2 13,200 495,700 7,100 0.90 9 11 11.27 3 29/32 1 7/8 0.187 0.172 2 7/8
NC26 3 1/2 1 1/2 8,800 390,300 4,900 0.60 9 10 10.76 N/A 1 3/8 0.183 0.165
SLH90 3 7/8 2 13,100 444,000 6,900 0.90 9 11 10.95 3 11/16 1 7/8 0.187 0.168
HT26 3 1/2 1 1/2 12,100 390,300 7,300 0.83 9 12 10.85 3 5/16 1 3/8 0.182 0.166
HT31 4 1/8 2 1/8 16,600 447,100 10,000 1.14 9 13 11.26 3 23/32 2 0.188 0.172
XT26 3 1/2 1 1/2 14,800 367,400 8,900 1.01 10 15 11.02 3 3/32 1 3/8 0.181 0.168
XT31 3 7/8 2 1/8 16,600 415,100 10,000 1.14 10 15 11.06 3 1/2 2 0.188 0.169
NC31 4 1/8 2 13,200 495,700 7,100 0.81 9 11 11.27 3 15/16 1 7/8 0.187 0.173 2 7/8
NC26 3 1/2 1 1/2 8,800 390,300 4,900 0.54 9 10 10.76 N/A 1 3/8 0.183 0.165
SLH90 3 7/8 2 13,100 444,000 6,900 0.81 9 11 10.95 3 23/32 1 7/8 0.187 0.168
HT26 3 5/8 1 1/2 13,100 390,300 7,900 0.81 9 12 10.99 3 3/8 1 3/8 0.182 0.168
HT31 4 1/8 2 1/8 16,600 447,100 10,000 1.02 9 13 11.26 3 3/4 2 0.188 0.172
XT26 3 1/2 1 1/2 14,800 367,400 8,900 0.91 10 15 11.02 3 5/32 1 3/8 0.181 0.168
XT31 3 7/8 2 1/8 16,600 415,100 10,000 1.02 10 15 11.06 3 17/32 2 0.188 0.169
NC31 4 1/8 2 13,200 495,700 7,100 0.63 9 11 11.29 4 1/16 1 7/8 0.187 0.173 2 7/8
NC26 3 5/8 1 1/2 9,000 390,300 4,900 0.43 9 10 10.90 N/A 1 3/8 0.183 0.167
SLH90 3 7/8 2 13,300 444,000 6,900 0.63 9 11 10.95 3 27/32 1 7/8 0.187 0.168
HT26 3 5/8 1 1/2 13,100 390,300 7,900 0.63 9 12 10.99 3 9/16 1 3/8 0.182 0.168
HT31 4 1/8 2 18,900 495,700 11,300 0.91 9 13 11.39 3 27/32 1 7/8 0.187 0.174
XT26 3 1/2 1 3/8 15,900 401,300 9,500 0.76 10 15 11.11 3 5/16 1 1/4 0.180 0.170
XT31 3 7/8 2 1/8 16,600 415,000 10,000 0.80 10 15 11.06 3 11/16 2 0.188 0.169
GPDS31 4 1/8 2 17,200 495,700 10,300 0.83 9 11 11.27 3 15/16 1 7/8 0.187 0.172
HT26 3 5/8 1 1/4 15,300 455,100 9,200 0.71 9 12 11.15 3 17/32 1 1/8 0.180 0.171 2 7/8
HT31 4 1/8 2 18,900 495,700 11,300 0.88 9 13 11.39 3 7/8 1 7/8 0.187 0.174
XT26 3 1/2 1 1/4 16,400 432,200 9,800 0.76 10 15 11.19 3 5/16 1 1/8 0.179 0.171
XT31 4 2 20,400 463,700 12,200 0.94 10 15 11.38 3 21/32 1 7/8 0.187 0.174
GPDS31 4 1/8 2 17,200 495,700 10,300 0.80 9 11 11.27 3 15/16 1 7/8 0.187 0.172
HT26 3 5/8 1 1/4 15,300 455,100 9,200 0.66 9 12 11.15 3 9/16 1 1/8 0.180 0.171 2 7/8
HT31 4 1/8 2 18,900 495,700 11,300 0.82 9 13 11.39 3 29/32 1 7/8 0.187 0.174
XT26 3 1/2 1 1/4 16,400 432,200 9,800 0.71 10 15 11.19 3 3/8 1 1/8 0.179 0.171
XT31 4 2 20,400 463,700 12,200 0.88 10 15 11.38 3 23/32 1 7/8 0.187 0.174
GPDS31 4 1/8 2 17,200 495,700 10,300 0.74 9 11 11.27 4 1 7/8 0.187 0.172

5. Grade Pipe Body
and Torsional Tensile Pipe Body Pipe Body Polar
Size Nominal Upset Yield Yield Wall Nominal Section Section Section Internal Collapse
OD Weight Type Strength Strength Thickness ID Area Modulus Modulus Pressure Pressure
in. lb/ft ft-lb lb in. in. sq in. cu in. cu in. psi psi
Pipe Data
48 © Grant Prideco. All rights reserved. December 2003
G R A N T P R I D E C O
Drill pipe data tables
While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information
contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this
material. No expressed or implied warranty is intended.
3 1/2 9.50 E-75 EU 14,100 194,300 0.254 2.992 2.590 1.961 3.923 9,525 10,001
9.50 E-75 IU 14,100 194,300 0.254 2.992 2.590 1.961 3.923 9,525 10,001
9.50 E-75 IU 14,100 194,300 0.254 2.992 2.590 1.961 3.923 9,525 10,001
9.50 E-75 EU 14,100 194,300 0.254 2.992 2.590 1.961 3.923 9,525 10,001
9.50 E-75 EU 14,100 194,300 0.254 2.992 2.590 1.961 3.923 9,525 10,001
9.50 E-75 IU 14,100 194,300 0.254 2.992 2.590 1.961 3.923 9,525 10,001
9.50 E-75 EU 14,100 194,300 0.254 2.992 2.590 1.961 3.923 9,525 10,001
3 1/2 9.50 X-95 EU 17,900 246,100 0.254 2.992 2.590 1.961 3.923 12,065 12,077
9.50 X-95 IU 17,900 246,100 0.254 2.992 2.590 1.961 3.923 12,065 12,077
9.50 X-95 IU 17,900 246,100 0.254 2.992 2.590 1.961 3.923 12,065 12,077
9.50 X-95 EU 17,900 246,100 0.254 2.992 2.590 1.961 3.923 12,065 12,077
9.50 X-95 EU 17,900 246,100 0.254 2.992 2.590 1.961 3.923 12,065 12,077
9.50 X-95 IU 17,900 246,100 0.254 2.992 2.590 1.961 3.923 12,065 12,077
9.50 X-95 EU 17,900 246,100 0.254 2.992 2.590 1.961 3.923 12,065 12,077
3 1/2 9.50 G-105 EU 19,800 272,000 0.254 2.992 2.590 1.961 3.923 13,335 13,055
9.50 G-105 IU 19,800 272,000 0.254 2.992 2.590 1.961 3.923 13,335 13,055
9.50 G-105 IU 19,800 272,000 0.254 2.992 2.590 1.961 3.923 13,335 13,055
9.50 G-105 EU 19,800 272,000 0.254 2.992 2.590 1.961 3.923 13,335 13,055
9.50 G-105 EU 19,800 272,000 0.254 2.992 2.590 1.961 3.923 13,335 13,055
9.50 G-105 IU 19,800 272,000 0.254 2.992 2.590 1.961 3.923 13,335 13,055
9.50 G-105 EU 19,800 272,000 0.254 2.992 2.590 1.961 3.923 13,335 13,055
3 1/2 9.50 S-135 EU 25,500 349,700 0.254 2.992 2.590 1.961 3.923 17,145 15,748
9.50 S-135 IU 25,500 349,700 0.254 2.992 2.590 1.961 3.923 17,145 15,748
9.50 S-135 IU 25,500 349,700 0.254 2.992 2.590 1.961 3.923 17,145 15,748
9.50 S-135 EU 25,500 349,700 0.254 2.992 2.590 1.961 3.923 17,145 15,748
9.50 S-135 EU 25,500 349,700 0.254 2.992 2.590 1.961 3.923 17,145 15,748
9.50 S-135 IU 25,500 349,700 0.254 2.992 2.590 1.961 3.923 17,145 15,748
9.50 S-135 EU 25,500 349,700 0.254 2.992 2.590 1.961 3.923 17,145 15,748
3 1/2 9.50 Z-140 IU 26,400 362,600 0.254 2.992 2.590 1.961 3.923 17,780 16,158
9.50 Z-140 EU 26,400 362,600 0.254 2.992 2.590 1.961 3.923 17,780 16,158
9.50 Z-140 IU 26,400 362,600 0.254 2.992 2.590 1.961 3.923 17,780 16,158
9.50 Z-140 EU 26,400 362,600 0.254 2.992 2.590 1.961 3.923 17,780 16,158
3 1/2 9.50 V-150 IU 28,300 388,500 0.254 2.992 2.590 1.961 3.923 19,050 16,943
9.50 V-150 EU 28,300 388,500 0.254 2.992 2.590 1.961 3.923 19,050 16,943
9.50 V-150 IU 28,300 388,500 0.254 2.992 2.590 1.961 3.923 19,050 16,943
9.50 V-150 EU 28,300 388,500 0.254 2.992 2.590 1.961 3.923 19,050 16,943
3 1/2 13.30 E-75 EU 18,600 271,600 0.368 2.764 3.621 2.572 5.144 13,800 14,113
13.30 E-75 IU 18,600 271,600 0.368 2.764 3.621 2.572 5.144 13,800 14,113
13.30 E-75 IU 18,600 271,600 0.368 2.764 3.621 2.572 5.144 13,800 14,113
13.30 E-75 EU 18,600 271,600 0.368 2.764 3.621 2.572 5.144 13,800 14,113
13.30 E-75 EU 18,600 271,600 0.368 2.764 3.621 2.572 5.144 13,800 14,113
13.30 E-75 IU 18,600 271,600 0.368 2.764 3.621 2.572 5.144 13,800 14,113
13.30 E-75 EU 18,600 271,600 0.368 2.764 3.621 2.572 5.144 13,800 14,113
3 1/2 13.30 X-95 EU 23,500 344,000 0.368 2.764 3.621 2.572 5.144 17,480 17,877
13.30 X-95 IU 23,500 344,000 0.368 2.764 3.621 2.572 5.144 17,480 17,877
13.30 X-95 IU 23,500 344,000 0.368 2.764 3.621 2.572 5.144 17,480 17,877
13.30 X-95 EU 23,500 344,000 0.368 2.764 3.621 2.572 5.144 17,480 17,877
13.30 X-95 EU 23,500 344,000 0.368 2.764 3.621 2.572 5.144 17,480 17,877
13.30 X-95 IU 23,500 344,000 0.368 2.764 3.621 2.572 5.144 17,480 17,877
13.30 X-95 EU 23,500 344,000 0.368 2.764 3.621 2.572 5.144 17,480 17,877

6. Tool Joint Data Assembly Data
Torsional Minimum
Torsional Tensile Ratio Pin Box Tool Joint
Connection Outside Inside Yield Yield Make-up Tool Joint Tong Tong Adjusted OD for Drift Displace- Size
Type Diameter Diameter Strength Strength Torque to Pipe Space Space Weight Prem. Class Diameter Capacity ment OD
in. in. ft-lb lb ft-lb in. in. lb/ft in. in. US gal/ft US gal/ft in.
* *
49© Grant Prideco. All rights reserved. December 2003
D R I L L pipe data ta b le s
*2” Longer than standard.
While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information
contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this
material. No expressed or implied warranty is intended.
NC38 4 3/4 2 11/16 18,100 587,300 9,700 1.28 10 12.5 11.07 4 13/32 2 9/16 0.360 0.169 3 1/2
NC31 4 1/8 2 1/8 11,900 447,100 6,400 0.84 9 11 10.49 3 7/8 2 0.354 0.161
HT31 4 1/8 2 1/8 16,600 447,100 10,000 1.18 9 13 10.62 3 11/16 2 0.353 0.162
HT38 4 3/4 2 11/16 25,300 587,300 15,200 1.79 10 15.5 11.31 4 5/32 2 9/16 0.360 0.173
SLH90 4 3/4 2 11/16 18,688 534,200 11,100 1.33 10 12.5 11.07 4 3/16 2 9/16 0.360 0.169
XT31 4 2 1/8 18,600 415,100 11,200 1.32 10 15 10.61 3 1/2 2 0.352 0.162
XT38 4 3/4 2 13/16 23,900 473,000 14,300 1.70 10 15 11.08 4 2 11/16 0.362 0.170
NC38 4 3/4 2 11/16 18,100 587,300 9,700 1.01 10 12.5 11.07 4 15/32 2 9/16 0.360 0.169 3 1/2
NC31 4 1/8 2 13,200 495,700 7,100 0.74 9 11 10.61 4 1 7/8 0.352 0.162
HT31 4 1/8 2 1/8 16,600 447,100 10,000 0.93 9 13 10.62 3 13/16 2 0.353 0.162
HT38 4 3/4 2 11/16 25,300 587,300 15,200 1.41 10 15.5 11.31 4 1/4 2 9/16 0.360 0.173
SLH90 4 3/4 2 11/16 18,700 534,200 11,100 1.04 10 12.5 11.07 4 9/32 2 9/16 0.360 0.169
XT31 4 2 1/8 18,600 415,100 11,200 1.04 10 15 10.61 3 5/8 2 0.352 0.162
XT38 4 3/4 2 13/16 23,900 473,000 14,300 1.34 10 15 11.08 4 3/32 2 11/16 0.362 0.170
NC38 4 3/4 2 11/16 18,100 587,300 9,700 0.91 10 12.5 11.07 4 17/32 2 9/16 0.360 0.169 3 1/2
NC31 4 1/8 2 13,200 495,700 7,100 0.67 9 11 10.61 4 1/16 1 7/8 0.352 0.162
HT31 4 1/8 2 18,900 495,700 11,300 0.95 9 13 10.74 3 27/32 1 7/8 0.351 0.164
HT38 4 3/4 2 11/16 25,300 587,300 15,200 1.28 10 15.5 11.31 4 9/32 2 9/16 0.360 0.173
SLH90 4 3/4 2 11/16 18,700 534,200 11,100 0.94 10 12.5 11.07 4 5/16 2 9/16 0.360 0.169
XT31 4 2 1/8 18,600 415,100 11,200 0.94 10 15 10.61 3 11/16 2 0.352 0.162
XT38 4 3/4 2 13/16 23,900 473,000 14,300 1.21 10 15 11.08 4 5/32 2 11/16 0.362 0.170
NC38 4 7/8 2 9/16 20,200 649,200 10,700 0.79 10 12.5 11.45 4 21/32 2 7/16 0.358 0.175 3 1/2
NC31 4 1/8 2 13,200 495,700 7,100 0.52 9 11 10.61 N/A 1 7/8 0.352 0.162
HT31 4 1/8 2 18,900 495,700 11,300 0.74 9 13 10.74 4 1 7/8 0.351 0.164
HT38 4 3/4 2 11/16 25,300 587,300 15,200 0.99 10 15.5 11.31 4 7/16 2 9/16 0.360 0.173
SLH90 4 3/4 2 9/16 20,900 596,100 12,400 0.82 10 12.5 11.24 4 7/16 2 7/16 0.358 0.172
XT31 4 2 20,400 463,700 12,200 0.80 10 15 10.74 3 13/16 1 7/8 0.350 0.164
XT38 4 3/4 2 13/16 23,900 473,000 14,300 0.94 10 15 11.08 4 9/32 2 11/16 0.362 0.170
HT31 4 1/8 2 18,900 495,700 11,300 0.72 9 13 10.74 4 1/32 1 7/8 0.351 0.164 3 1/2
HT38 4 3/4 2 11/16 25,300 587,300 15,200 0.96 10 15.5 11.31 4 15/32 2 9/16 0.360 0.173
XT31 4 2 20,400 463,700 12,200 0.76 10 15 10.74 3 27/32 1 7/8 0.350 0.164
XT38 4 3/4 2 13/16 23,900 473,000 14,300 0.91 10 15 11.08 4 5/16 2 11/16 0.362 0.170
HT31 4 1/4 1 3/4 23,400 584,100 14,000 0.83 9 13 11.14 4 1 5/8 0.348 0.170 3 1/2
HT38 4 3/4 2 11/16 25,300 587,300 15,200 0.89 10 15.5 11.31 4 1/2 2 9/16 0.360 0.173
XT31 4 2 20,400 463,700 12,200 0.72 10 15 10.74 3 29/32 1 7/8 0.350 0.164
XT38 4 3/4 2 13/16 23,900 473,000 14,300 0.84 10 15 11.08 4 11/32 2 11/16 0.362 0.170
NC38 4 3/4 2 11/16 18,100 587,300 9,700 0.97 10 12.5 14.24 4 1/2 2 9/16 0.310 0.218 3 1/2
NC31 4 1/8 2 13,200 495,700 7,100 0.71 9 11 13.93 4 1/32 1 7/8 0.302 0.213
HT31 4 1/8 2 1/8 16,600 447,100 10,000 0.89 9 13 13.91 3 27/32 2 0.303 0.213
HT38 4 3/4 2 11/16 25,300 587,300 15,200 1.36 10 15.5 14.45 4 1/4 2 9/16 0.310 0.221
SLH90 4 3/4 2 11/16 18,700 534,200 11,100 1.01 10 12.5 14.24 4 9/32 2 9/16 0.310 0.218
XT31 4 2 1/8 18,600 415,100 11,200 1.00 10 15 13.87 3 5/8 2 0.302 0.212
XT38 4 3/4 2 11/16 27,700 537,800 16,600 1.49 10 15 14.42 4 1/32 2 9/16 0.310 0.221
NC38 5 2 9/16 20,300 649,200 10,700 0.86 10 12.5 14.84 4 19/32 2 7/16 0.308 0.227 3 1/2
NC31 4 1/8 2 13,200 495,700 7,100 0.56 9 11 13.93 N/A 1 7/8 0.302 0.213
HT31 4 1/8 2 18,900 495,700 11,300 0.80 9 13 14.04 3 15/16 1 7/8 0.301 0.215
HT38 4 3/4 2 11/16 25,300 587,300 15,200 1.08 10 15.5 14.45 4 3/8 2 9/16 0.310 0.221
SLH90 4 3/4 2 11/16 18,700 534,200 11,100 0.80 10 12.5 14.24 4 3/8 2 9/16 0.310 0.218
XT31 4 2 1/8 18,600 415,100 11,200 0.79 10 15 13.87 3 25/32 2 0.302 0.212
XT38 4 3/4 2 11/16 27,700 537,800 16,600 1.18 10 15 14.42 4 5/32 2 9/16 0.310 0.221

7. Grade Pipe Body
and Torsional Tensile Pipe Body Pipe Body Polar
Size Nominal Upset Yield Yield Wall Nominal Section Section Section Internal Collapse
OD Weight Type Strength Strength Thickness ID Area Modulus Modulus Pressure Pressure
in. lb/ft ft-lb lb in. in. sq in. cu in. cu in. psi psi
Pipe Data
50 © Grant Prideco. All rights reserved. December 2003
G R A N T P R I D E C O
Drill pipe data tables
While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information
contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this
material. No expressed or implied warranty is intended.
3 1/2 13.30 G-105 EU 26,000 380,200 0.368 2.764 3.621 2.572 5.144 19,320 19,758
13.30 G-105 IU 26,000 380,200 0.368 2.764 3.621 2.572 5.144 19,320 19,758
13.30 G-105 IU 26,000 380,200 0.368 2.764 3.621 2.572 5.144 19,320 19,758
13.30 G-105 EU 26,000 380,200 0.368 2.764 3.621 2.572 5.144 19,320 19,758
13.30 G-105 EU 26,000 380,200 0.368 2.764 3.621 2.572 5.144 19,320 19,758
13.30 G-105 IU 26,000 380,200 0.368 2.764 3.621 2.572 5.144 19,320 19,758
13.30 G-105 EU 26,000 380,200 0.368 2.764 3.621 2.572 5.144 19,320 19,758
3 1/2 13.30 S-135 EU 33,400 488,800 0.368 2.764 3.621 2.572 5.144 24,840 25,404
13.30 S-135 IU 33,400 488,800 0.368 2.764 3.621 2.572 5.144 24,840 25,404
13.30 S-135 IU 33,400 488,800 0.368 2.764 3.621 2.572 5.144 24,840 25,404
13.30 S-135 EU 33,400 488,800 0.368 2.764 3.621 2.572 5.144 24,840 25,404
13.30 S-135 EU 33,400 488,800 0.368 2.764 3.621 2.572 5.144 24,840 25,404
13.30 S-135 IU 33,400 488,800 0.368 2.764 3.621 2.572 5.144 24,840 25,404
13.30 S-135 EU 33,400 488,800 0.368 2.764 3.621 2.572 5.144 24,840 25,404
13.30 S-135 EU 33,400 488,800 0.368 2.764 3.621 2.572 5.144 24,840 25,404
3 1/2 13.30 Z-140 IU 34,600 506,900 0.368 2.764 3.621 2.572 5.144 25,760 26,345
13.30 Z-140 EU 34,600 506,900 0.368 2.764 3.621 2.572 5.144 25,760 26,345
13.30 Z-140 IU 34,600 506,900 0.368 2.764 3.621 2.572 5.144 25,760 26,345
13.30 Z-140 EU 34,600 506,900 0.368 2.764 3.621 2.572 5.144 25,760 26,345
13.30 Z-140 EU 34,600 506,900 0.368 2.764 3.621 2.572 5.144 25,760 26,345
3 1/2 13.30 V-150 IU 37,100 543,100 0.368 2.764 3.621 2.572 5.144 27,600 28,226
13.30 V-150 EU 37,100 543,100 0.368 2.764 3.621 2.572 5.144 27,600 28,226
13.30 V-150 IU 37,100 543,100 0.368 2.764 3.621 2.572 5.144 27,600 28,226
13.30 V-150 EU 37,100 543,100 0.368 2.764 3.621 2.572 5.144 27,600 28,226
13.30 V-150 EU 37,100 543,100 0.368 2.764 3.621 2.572 5.144 27,600 28,226
3 1/2 15.50 E-75 EU 21,100 322,800 0.449 2.602 4.304 2.923 5.847 16,838 16,774
15.50 E-75 EU 21,100 322,800 0.449 2.602 4.304 2.923 5.847 16,838 16,774
15.50 E-75 EU 21,100 322,800 0.449 2.602 4.304 2.923 5.847 16,838 16,774
3 1/2 15.50 X-95 EU 26,700 408,800 0.449 2.602 4.304 2.923 5.847 21,328 21,247
15.50 X-95 EU 26,700 408,800 0.449 2.602 4.304 2.923 5.847 21,328 21,247
15.50 X-95 EU 26,700 408,800 0.449 2.602 4.304 2.923 5.847 21,328 21,247
3 1/2 15.50 G-105 EU 29,500 451,900 0.449 2.602 4.304 2.923 5.847 23,573 23,484
15.50 G-105 EU 29,500 451,900 0.449 2.602 4.304 2.923 5.847 23,573 23,484
15.50 G-105 EU 29,500 451,900 0.449 2.602 4.304 2.923 5.847 23,573 23,484
15.50 G-105 EU 29,500 451,900 0.449 2.602 4.304 2.923 5.847 23,573 23,484
3 1/2 15.50 S-135 EU 38,000 581,000 0.449 2.602 4.304 2.923 5.847 30,308 30,194
15.50 S-135 EU 38,000 581,000 0.449 2.602 4.304 2.923 5.847 30,308 30,194
15.50 S-135 EU 38,000 581,000 0.449 2.602 4.304 2.923 5.847 30,308 30,194
15.50 S-135 EU 38,000 581,000 0.449 2.602 4.304 2.923 5.847 30,308 30,194
15.50 S-135 EU 38,000 581,000 0.449 2.602 4.304 2.923 5.847 30,308 30,194
15.50 S-135 EU 38,000 581,000 0.449 2.602 4.304 2.923 5.847 30,308 30,194
3 1/2 15.50 Z-140 EU 39,400 602,500 0.449 2.602 4.304 2.923 5.847 31,430 31,312
15.50 Z-140 EU 39,400 602,500 0.449 2.602 4.304 2.923 5.847 31,430 31,312
15.50 Z-140 EU 39,400 602,500 0.449 2.602 4.304 2.923 5.847 31,430 31,312
15.50 Z-140 EU 39,400 602,500 0.449 2.602 4.304 2.923 5.847 31,430 31,312
3 1/2 15.50 V-150 EU 42,200 645,500 0.449 2.602 4.304 2.923 5.847 33,675 33,549
15.50 V-150 EU 42,200 645,500 0.449 2.602 4.304 2.923 5.847 33,675 33,549
15.50 V-150 EU 42,200 645,500 0.449 2.602 4.304 2.923 5.847 33,675 33,549
15.50 V-150 EU 42,200 645,500 0.449 2.602 4.304 2.923 5.847 33,675 33,549
16.60 S-135 EU 55,500 595,000 0.337 3.826 4.407 4.271 8.543 17,693 16,773

8. Tool Joint Data Assembly Data
Torsional Minimum
Torsional Tensile Ratio Pin Box Tool Joint
Connection Outside Inside Yield Yield Make-up Tool Joint Tong Tong Adjusted OD for Drift Displace- Size
Type Diameter Diameter Strength Strength Torque to Pipe Space Space Weight Prem. Class Diameter Capacity ment OD
in. in. ft-lb lb ft-lb in. in. lb/ft in. in. US gal/ft US gal/ft in.
* *
51© Grant Prideco. All rights reserved. December 2003
D R I L L pipe data ta b le s
*2” Longer than standard.
While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information
contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this
material. No expressed or implied warranty is intended.
NC38 5 2 7/16 22,200 708,100 11,700 0.85 10 12.5 15.00 4 21/32 2 5/16 0.306 0.229 3 1/2
NC31 4 1/8 2 13,200 495,700 7,100 0.51 9 11 13.93 N/A 1 7/8 0.302 0.213
HT31 4 1/8 2 18,900 495,700 11,300 0.73 9 13 14.04 4 1 7/8 0.301 0.215
HT38 4 3/4 2 11/16 25,300 587,300 15,200 0.97 10 15.5 14.45 4 7/16 2 9/16 0.310 0.221
SLH90 4 3/4 2 9/16 20,900 596,100 12,400 0.80 10 12.5 14.41 4 7/16 2 7/16 0.308 0.220
XT31 4 1/8 2 21,100 463,700 12,700 0.81 10 15 14.21 3 13/16 1 7/8 0.300 0.217
XT38 4 3/4 2 11/16 27,700 537,800 16,600 1.07 10 15 14.42 4 7/32 2 9/16 0.310 0.221
NC38 5 2 1/8 26,500 842,400 14,000 0.79 10 12.5 15.37 4 13/16 2 0.302 0.235 3 1/2
NC31 4 1/8 2 13,200 495,700 7,100 0.40 9 11 13.93 N/A 1 7/8 0.302 0.213
HT31 4 1/8 2 18,900 495,700 11,300 0.57 9 13 14.04 N/A 1 7/8 0.301 0.215
HT38 4 3/4 2 9/16 26,900 649,200 16,100 0.81 10 15.5 14.63 4 9/16 2 7/16 0.308 0.224
SLH90 4 3/4 2 9/16 20,900 596,100 12,400 0.63 10 12.5 14.41 4 19/32 2 7/16 0.308 0.220
XT31 4 1/8 1 7/8 23,400 509,400 14,000 0.70 10 15 14.34 4 31/32 1 3/4 0.298 0.219
XT38 4 3/4 2 11/16 27,700 537,800 16,600 0.83 10 15 14.42 4 13/32 2 9/16 0.310 0.221
GPDS38 4 7/8 2 9/16 25,700 649,200 15,400 0.77 10 12.5 14.62 4 11/16 2 7/16 0.308 0.224
HT31 4 1/8 1 7/8 19,900 541,400 11,900 0.58 9 13 14.17 N/A 1 3/4 0.300 0.217 3 1/2
HT38 4 3/4 2 9/16 26,900 649,200 16,100 0.78 10 15.5 14.63 4 9/16 2 7/16 0.308 0.224
XT31 4 1/8 1 3/4 25,000 552,100 15,000 0.72 10 15 14.47 3 31/32 1 5/8 0.297 0.221
XT38 4 3/4 2 9/16 31,300 599,600 18,800 0.90 10 15 14.59 4 3/8 2 7/16 0.308 0.223
GPDS38 5 2 9/16 25,800 649,200 15,500 0.75 10 12.5 14.84 4 11/16 2 7/16 0.308 0.227
HT31 4 1/4 1 3/4 23,400 584,100 14,000 0.63 9 13 14.47 4 1/4 1 5/8 0.298 0.221 3 1/2
HT38 4 3/4 2 9/16 26,900 649,200 16,100 0.73 10 15.5 14.63 4 5/8 2 7/16 0.308 0.224
XT31 4 1/8 1 3/4 25,000 552,100 15,000 0.67 10 15 14.47 4 1/16 1 5/8 0.297 0.221
XT38 4 3/4 2 9/16 31,300 599,600 18,800 0.84 10 15 14.59 4 7/16 2 7/16 0.308 0.223
GPDS38 5 2 9/16 25,800 649,200 15,500 0.70 10 12.5 14.84 4 3/4 2 7/16 0.308 0.227
NC38 5 2 9/16 20,300 649,200 10,700 0.96 10 12.5 16.94 4 17/32 2 7/16 0.276 0.259 3 1/2
HT38 4 3/4 2 9/16 26,900 649,200 16,100 1.27 10 15.5 16.71 4 1/4 2 7/16 0.276 0.256
XT38 4 3/4 2 9/16 31,300 599,600 18,800 1.48 10 15 16.68 4 1/32 2 7/16 0.276 0.255
NC38 5 2 7/16 22,200 708,100 11,700 0.83 10 12.5 17.11 4 21/32 2 5/16 0.274 0.262 3 1/2
HT38 4 3/4 2 9/16 26,900 649,200 16,100 1.01 10 15.5 16.71 4 3/8 2 7/16 0.276 0.256
XT38 4 3/4 2 9/16 31,300 599,600 18,800 1.17 10 15 16.68 4 5/32 2 7/16 0.276 0.255
NC38 5 2 1/8 26,500 842,400 14,000 0.90 10 12.5 17.50 4 23/32 2 0.269 0.268 3 1/2
HT38 4 3/4 2 9/16 26,900 649,200 16,100 0.91 10 15.5 16.71 4 7/16 2 7/16 0.276 0.256
NC40 5 1/4 2 9/16 27,800 838,300 14,600 0.94 9 12 17.24 4 15/16 2 7/16 0.276 0.264
XT38 4 3/4 2 9/16 31,300 599,600 18,800 1.06 10 15 16.68 4 1/4 2 7/16 0.276 0.255
NC38 5 2 1/8 26,500 842,400 14,000 0.70 10 12.5 17.50 4 29/32 2 0.269 0.268 3 1/2
HT38 4 3/4 2 7/16 28,400 708,100 17,000 0.75 10 15.5 16.90 4 19/32 2 5/16 0.273 0.258
NC40 5 1/2 2 1/4 32,900 980,000 17,100 0.87 10 12.5 18.31 5 3/32 2 1/8 0.271 0.280
XT38 4 3/4 2 7/16 34,200 658,500 20,500 0.90 10 15 16.86 4 3/8 2 5/16 0.273 0.258
XT39 4 7/8 2 7/16 38,500 788,600 22,100 1.01 10 15 17.09 4 3/8 2 5/16 0.273 0.261
GPDS38 5 2 7/16 29,200 708,100 17,500 0.77 10 12.5 17.11 4 23/32 2 5/16 0.274 0.262
HT38 4 3/4 2 7/16 28,400 708,100 17,000 0.72 10 15.5 16.90 4 5/8 2 5/16 0.273 0.258 3 1/2
XT38 4 3/4 2 7/16 34,200 658,500 20,500 0.87 10 15 16.86 4 13/32 2 5/16 0.273 0.258
XT39 4 7/8 2 7/16 38,500 788,600 23,100 0.98 10 15 17.09 4 13/32 2 5/16 0.273 0.261
GPDS38 5 2 7/16 29,200 708,100 17,500 0.74 10 12.5 17.11 4 3/4 2 5/16 0.274 0.262
HT38 5 2 1/4 37,700 790,900 22,600 0.89 10 15.5 17.63 4 19/32 2 1/8 0.270 0.270 3 1/2
XT38 4 3/4 2 1/4 36,300 741,400 21,800 0.86 10 15 17.11 4 13/32 2 1/8 0.271 0.262
XT39 4 7/8 2 1/4 40,700 871,400 24,400 0.96 10 15 17.35 4 3/8 2 1/8 0.270 0.265
GPDS38 5 2 1/4 33,900 790,900 20,300 0.80 10 12.5 17.35 4 23/32 2 1/8 0.271 0.265

9. Grade Pipe Body
and Torsional Tensile Pipe Body Pipe Body Polar
Size Nominal Upset Yield Yield Wall Nominal Section Section Section Internal Collapse
OD Weight Type Strength Strength Thickness ID Area Modulus Modulus Pressure Pressure
in. lb/ft ft-lb lb in. in. sq in. cu in. cu in. psi psi
Pipe Data
52 © Grant Prideco. All rights reserved. December 2003
G R A N T P R I D E C O
Drill pipe data tables
While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information
contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this
material. No expressed or implied warranty is intended.
4 11.85 E-75 IU 19,500 230,800 0.262 3.476 3.077 2.700 5.400 8,597 8,381
11.85 E-75 IU 19,500 230,800 0.262 3.476 3.077 2.700 5.400 8,597 8,381
11.85 E-75 IU 19,500 230,800 0.262 3.476 3.077 2.700 5.400 8,597 8,381
11.85 E-75 IU 19,500 230,800 0.262 3.476 3.077 2.700 5.400 8,597 8,381
11.85 E-75 IU 19,500 230,800 0.262 3.476 3.077 2.700 5.400 8,597 8,381
4 11.85 X-95 IU 24,700 292,300 0.262 3.476 3.077 2.700 5.400 10,889 9,978
11.85 X-95 IU 24,700 292,300 0.262 3.476 3.077 2.700 5.400 10,889 9,978
11.85 X-95 IU 24,700 292,300 0.262 3.476 3.077 2.700 5.400 10,889 9,978
11.85 X-95 IU 24,700 292,300 0.262 3.476 3.077 2.700 5.400 10,889 9,978
11.85 X-95 IU 24,700 292,300 0.262 3.476 3.077 2.700 5.400 10,889 9,978
4 11.85 G-105 IU 27,300 323,100 0.262 3.476 3.077 2.700 5.400 12,036 10,708
11.85 G-105 IU 27,300 323,100 0.262 3.476 3.077 2.700 5.400 12,036 10,708
11.85 G-105 IU 27,300 323,100 0.262 3.476 3.077 2.700 5.400 12,036 10,708
11.85 G-105 IU 27,300 323,100 0.262 3.476 3.077 2.700 5.400 12,036 10,708
11.85 G-105 IU 27,300 323,100 0.262 3.476 3.077 2.700 5.400 12,036 10,708
4 11.85 S-135 IU 35,100 415,400 0.262 3.476 3.077 2.700 5.400 15,474 12,618
11.85 S-135 IU 35,100 415,400 0.262 3.476 3.077 2.700 5.400 15,474 12,618
11.85 S-135 IU 35,100 415,400 0.262 3.476 3.077 2.700 5.400 15,474 12,618
11.85 S-135 IU 35,100 415,400 0.262 3.476 3.077 2.700 5.400 15,474 12,618
11.85 S-135 IU 35,100 415,400 0.262 3.476 3.077 2.700 5.400 15,474 12,618
4 11.85 Z-140 IU 36,400 430,700 0.262 3.476 3.077 2.700 5.400 16,048 12,894
11.85 Z-140 IU 36,400 430,700 0.262 3.476 3.077 2.700 5.400 16,048 12,894
11.85 Z-140 IU 36,400 430,700 0.262 3.476 3.077 2.700 5.400 16,048 12,894
4 11.85 V-150 IU 38,900 461,500 0.262 3.476 3.077 2.700 5.400 17,194 13,404
11.85 V-150 IU 38,900 461,500 0.262 3.476 3.077 2.700 5.400 17,194 13,404
11.85 V-150 IU 38,900 461,500 0.262 3.476 3.077 2.700 5.400 17,194 13,404
4 14.00 E-75 IU 23,300 285,400 0.330 3.340 3.805 3.229 6.458 10,828 11,354
14.00 E-75 IU 23,300 285,400 0.330 3.340 3.805 3.229 6.458 10,828 11,354
14.00 E-75 IU 23,300 285,400 0.330 3.340 3.805 3.229 6.458 10,828 11,354
14.00 E-75 IU 23,300 285,400 0.330 3.340 3.805 3.229 6.458 10,828 11,354
14.00 E-75 EU 23,300 285,400 0.330 3.340 3.805 3.229 6.458 10,828 11,354
14.00 E-75 IU 23,300 285,400 0.330 3.340 3.805 3.229 6.458 10,828 11,354
14.00 E-75 IU 23,300 285,400 0.330 3.340 3.805 3.229 6.458 10,828 11,354
4 14.00 X-95 IU 29,500 361,500 0.330 3.340 3.805 3.229 6.458 13,716 14,382
14.00 X-95 IU 29,500 361,500 0.330 3.340 3.805 3.229 6.458 13,716 14,382
14.00 X-95 IU 29,500 361,500 0.330 3.340 3.805 3.229 6.458 13,716 14,382
14.00 X-95 IU 29,500 361,500 0.330 3.340 3.805 3.229 6.458 13,716 14,382
14.00 X-95 EU 29,500 361,500 0.330 3.340 3.805 3.229 6.458 13,716 14,382
14.00 X-95 IU 29,500 361,500 0.330 3.340 3.805 3.229 6.458 13,716 14,382
14.00 X-95 IU 29,500 361,500 0.330 3.340 3.805 3.229 6.458 13,716 14,382
4 14.00 G-105 IU 32,600 399,500 0.330 3.340 3.805 3.229 6.458 15,159 15,896
14.00 G-105 IU 32,600 399,500 0.330 3.340 3.805 3.229 6.458 15,159 15,896
14.00 G-105 IU 32,600 399,500 0.330 3.340 3.805 3.229 6.458 15,159 15,896
14.00 G-105 IU 32,600 399,500 0.330 3.340 3.805 3.229 6.458 15,159 15,896
14.00 G-105 EU 32,600 399,500 0.330 3.340 3.805 3.229 6.458 15,159 15,896
14.00 G-105 IU 32,600 399,500 0.330 3.340 3.805 3.229 6.458 15,159 15,896
14.00 G-105 IU 32,600 399,500 0.330 3.340 3.805 3.229 6.458 15,159 15,896

10. Tool Joint Data Assembly Data
Torsional Minimum
Torsional Tensile Ratio Pin Box Tool Joint
Connection Outside Inside Yield Yield Make-up Tool Joint Tong Tong Adjusted OD for Drift Displace- Size
Type Diameter Diameter Strength Strength Torque to Pipe Space Space Weight Prem. Class Diameter Capacity ment OD
in. in. ft-lb lb ft-lb in. in. lb/ft in. in. US gal/ft US gal/ft in.
* *
53© Grant Prideco. All rights reserved. December 2003
D R I L L pipe data ta b le s
*2” Longer than standard.
While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information
contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this
material. No expressed or implied warranty is intended.
NC40 5 1/4 2 13/16 23,500 711,600 12,400 1.21 9 12 13.41 4 3/4 2 11/16 0.481 0.205 4
SH 4 3/4 2 9/16 15,300 512,000 8,100 0.78 9 12 12.91 4 3/8 2 7/16 0.477 0.198
HT38 4 3/4 2 11/16 25,300 587,300 15,200 1.30 10 15.5 13.08 4 9/32 2 9/16 0.477 0.200
XT38 4 3/4 2 11/16 27,900 537,800 16,600 1.42 10 15 13.04 4 1/16 2 9/16 0.477 0.199
XT39 4 7/8 2 13/16 32,900 603,000 19,700 1.69 10 15 13.08 4 5/32 2 11/16 0.479 0.200
NC40 5 1/4 2 13/16 23,500 711,600 12,400 0.95 9 12 13.41 4 27/32 2 11/16 0.481 0.205 4
SH 4 3/4 2 9/16 15,300 512,000 8,100 0.62 9 12 12.91 4 1/2 2 7/16 0.477 0.198
HT38 4 3/4 2 11/16 25,300 587,300 15,200 1.02 10 15.5 13.08 4 13/32 2 9/16 0.477 0.200
XT38 4 3/4 2 11/16 27,700 537,800 16,600 1.12 10 15 13.04 4 3/16 2 9/16 0.477 0.199
XT39 4 7/8 2 13/16 32,900 603,000 19,700 1.69 10 15 13.08 4 5/32 2 11/16 0.479 0.200
NC40 5 1/4 2 13/16 23,500 711,600 12,400 0.86 9 12 13.41 4 29/32 2 11/16 0.481 0.205 4
SH 4 3/4 2 9/16 15,300 512,000 8,100 0.56 9 12 12.91 4 9/16 2 7/16 0.477 0.198
HT38 4 3/4 2 9/16 26,900 649,200 16,100 0.99 10 15.5 13.27 4 13/32 2 7/16 0.475 0.203
XT38 4 3/4 2 11/16 27,900 537,800 16,600 1.01 10 15 13.04 4 9/32 2 9/16 0.477 0.199
XT39 4 7/8 2 13/16 32,900 603,000 19,700 1.21 10 15 13.08 4 11/32 2 11/16 0.479 0.200
NC40 5 1/2 2 9/16 28,100 838,300 14,600 0.80 9 12 14.23 5 1/16 2 7/16 0.476 0.218 4
SH 4 3/4 2 9/16 15,300 512,000 8,100 0.44 9 12 12.91 4 23/32 2 7/16 0.477 0.198
HT38 4 3/4 2 7/16 28,400 708,100 17,000 0.81 10 15.5 13.45 4 17/32 2 5/16 0.473 0.206
XT38 4 3/4 2 11/16 27,700 537,800 16,600 0.79 10 15 13.04 4 7/16 2 9/16 0.477 0.199
XT39 4 7/8 2 13/16 32,900 603,000 19,700 0.94 10 15 13.08 4 1/2 2 11/16 0.479 0.200
HT38 4 3/4 2 7/16 28,400 708,100 17,000 0.78 10 15.5 13.45 4 9/16 2 5/16 0.473 0.206 4
XT38 4 3/4 2 11/16 27,700 537,800 16,600 0.76 10 15 13.04 4 15/32 2 9/16 0.477 0.199
XT39 4 7/8 2 13/16 32,900 603,000 19,700 0.90 10 15 13.08 4 17/32 2 11/16 0.479 0.200
HT38 5 2 7/16 33,000 708,100 19,800 0.85 10 15.5 13.93 4 5/8 2 5/16 0.472 0.213 4
XT38 4 3/4 2 9/16 31,300 599,600 18,800 0.81 10 15 13.23 4 15/32 2 7/16 0.475 0.202
XT39 4 7/8 2 13/16 32,900 603,000 19,700 0.85 10 15 13.08 4 19/32 2 11/16 0.479 0.200
NC40 5 1/4 2 13/16 23,500 711,600 12,400 1.01 9 12 15.64 4 13/16 2 11/16 0.445 0.239 4
HT38 4 3/4 2 11/16 25,300 587,300 15,200 1.09 10 15.5 15.28 4 3/8 2 9/16 0.442 0.234
SH 4 3/4 2 7/16 17,100 570,900 9,100 0.73 9 12 15.31 4 7/16 2 5/16 0.440 0.234
HT40 5 1/4 2 13/16 31,900 711,600 19,100 1.37 9 15 15.93 4 19/32 2 11/16 0.444 0.244
NC46 6 3 1/4 33,600 901,200 17,600 1.44 9 12 16.51 5 9/32 3 1/8 0.453 0.253
XT38 4 3/4 2 11/16 27,700 537,800 16,600 1.19 10 15 15.25 4 5/32 2 9/16 0.442 0.233
XT39 4 7/8 2 13/16 32,900 603,000 19,700 1.41 10 15 13.08 4 5/32 2 11/16 0.479 0.234
NC40 5 1/4 2 11/16 25,700 776,400 13,500 0.87 9 12 15.82 4 15/16 2 9/16 0.443 0.242 4
HT38 4 3/4 2 11/16 25,300 587,300 15,200 0.86 10 15.5 15.28 4 17/32 2 9/16 0.442 0.234
SH 4 3/4 2 7/16 17,100 570,900 9,100 0.58 9 12 15.31 4 19/32 2 5/16 0.440 0.234
HT40 5 1/4 2 13/16 31,900 711,600 19,100 1.08 9 15 15.93 4 23/32 2 11/16 0.444 0.244
NC46 6 3 1/4 33,600 901,200 17,600 1.14 9 12 16.51 5 3/8 3 1/8 0.453 0.253
XT38 4 3/4 2 11/16 27,700 537,800 16,600 0.95 10 15 15.25 4 5/16 2 9/16 0.442 0.233
XT39 4 7/8 2 13/16 32,900 603,000 19,700 1.12 10 15 15.29 4 3/8 2 11/16 0.444 0.234
NC40 5 1/2 2 7/16 30,100 897,200 15,600 0.92 9 12 16.62 5 2 5/16 0.439 0.254 4
HT38 5 2 9/16 29,600 649,200 17,800 0.91 10 15.5 15.95 4 17/32 2 7/16 0.440 0.244
SH 4 3/4 2 7/16 17,100 570,900 9,100 0.52 9 12 15.31 4 21/32 2 5/16 0.440 0.234
HT40 5 1/4 2 13/16 31,900 711,600 19,100 0.98 9 15 15.93 4 25/32 2 11/16 0.444 0.244
NC46 6 3 1/4 33,600 901,200 17,600 1.03 9 12 16.51 5 7/16 3 1/8 0.453 0.253
XT38 4 3/4 2 11/16 27,700 537,800 16,600 0.85 10 15 15.25 4 3/8 2 9/16 0.442 0.233
XT39 4 7/8 2 13/16 32,900 603,000 19,700 1.01 10 15 15.29 4 7/16 2 11/16 0.444 0.234

11. Grade Pipe Body
and Torsional Tensile Pipe Body Pipe Body Polar
Size Nominal Upset Yield Yield Wall Nominal Section Section Section Internal Collapse
OD Weight Type Strength Strength Thickness ID Area Modulus Modulus Pressure Pressure
in. lb/ft ft-lb lb in. in. sq in. cu in. cu in. psi psi
Pipe Data
54 © Grant Prideco. All rights reserved. December 2003
G R A N T P R I D E C O
Drill pipe data tables
While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information
contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this
material. No expressed or implied warranty is intended.
4 14.00 S-135 IU 41,900 513,600 0.330 3.340 3.805 3.229 6.458 19,491 20,141
14.00 S-135 IU 41,900 513,600 0.330 3.340 3.805 3.229 6.458 19,491 20,141
14.00 S-135 IU 41,900 513,600 0.330 3.340 3.805 3.229 6.458 19,491 20,141
14.00 S-135 IU 41,900 513,600 0.330 3.340 3.805 3.229 6.458 19,491 20,141
14.00 S-135 EU 41,900 513,600 0.330 3.340 3.805 3.229 6.458 19,491 20,141
14.00 S-135 IU 41,900 513,600 0.330 3.340 3.805 3.229 6.458 19,491 20,141
14.00 S-135 IU 41,900 513,600 0.330 3.340 3.805 3.229 6.458 19,491 20,141
14.00 S-135 IU 41,900 513,600 0.330 3.340 3.805 3.229 6.458 19,491 20,141
4 14.00 Z-140 IU 43,500 532,700 0.330 3.340 3.805 3.229 6.458 20,213 20,742
14.00 Z-140 IU 43,500 532,700 0.330 3.340 3.805 3.229 6.458 20,213 20,742
14.00 Z-140 IU 43,500 532,700 0.330 3.340 3.805 3.229 6.458 20,213 20,742
14.00 Z-140 IU 43,500 532,700 0.330 3.340 3.805 3.229 6.458 20,213 20,742
14.00 Z-140 IU 43,500 532,700 0.330 3.340 3.805 3.229 6.458 20,213 20,742
4 14.00 V-150 IU 46,600 570,700 0.330 3.340 3.805 3.229 6.458 21,656 21,912
14.00 V-150 IU 46,600 570,700 0.330 3.340 3.805 3.229 6.458 21,656 21,912
14.00 V-150 IU 46,600 570,700 0.330 3.340 3.805 3.229 6.458 21,656 21,912
14.00 V-150 IU 46,600 570,700 0.330 3.340 3.805 3.229 6.458 21,656 21,912
14.00 V-150 IU 46,600 570,700 0.330 3.340 3.805 3.229 6.458 21,656 21,912
4 15.70 E-75 IU 25,800 324,100 0.380 3.240 4.322 3.578 7.157 12,469 12,896
15.70 E-75 IU 25,800 324,100 0.380 3.240 4.322 3.578 7.157 12,469 12,896
15.70 E-75 IU 25,800 324,100 0.380 3.240 4.322 3.578 7.157 12,469 12,896
15.70 E-75 EU 25,800 324,100 0.380 3.240 4.322 3.578 7.157 12,469 12,896
15.70 E-75 IU 25,800 324,100 0.380 3.240 4.322 3.578 7.157 12,469 12,896
15.70 E-75 IU 25,800 324,100 0.380 3.240 4.322 3.578 7.157 12,469 12,896
4 15.70 X-95 IU 32,700 410,500 0.380 3.240 4.322 3.578 7.157 15,794 16,335
15.70 X-95 IU 32,700 410,500 0.380 3.240 4.322 3.578 7.157 15,794 16,335
15.70 X-95 IU 32,700 410,500 0.380 3.240 4.322 3.578 7.157 15,794 16,335
15.70 X-95 EU 32,700 410,500 0.380 3.240 4.322 3.578 7.157 15,794 16,335
15.70 X-95 IU 32,700 410,500 0.380 3.240 4.322 3.578 7.157 15,794 16,335
15.70 X-95 IU 32,700 410,500 0.380 3.240 4.322 3.578 7.157 15,794 16,335
4 15.70 G-105 IU 36,100 453,800 0.380 3.240 4.322 3.578 7.157 17,456 18,055
15.70 G-105 IU 36,100 453,800 0.380 3.240 4.322 3.578 7.157 17,456 18,055
15.70 G-105 IU 36,100 453,800 0.380 3.240 4.322 3.578 7.157 17,456 18,055
15.70 G-105 EU 36,100 453,800 0.380 3.240 4.322 3.578 7.157 17,456 18,055
15.70 G-105 IU 36,100 453,800 0.380 3.240 4.322 3.578 7.157 17,456 18,055
15.70 G-105 IU 36,100 453,800 0.380 3.240 4.322 3.578 7.157 17,456 18,055
4 15.70 S-135 IU 46,500 583,400 0.380 3.240 4.322 3.578 7.157 22,444 23,213
15.70 S-135 IU 46,500 583,400 0.380 3.240 4.322 3.578 7.157 22,444 23,213
15.70 S-135 IU 46,500 583,400 0.380 3.240 4.322 3.578 7.157 22,444 23,213
15.70 S-135 EU 46,500 583,400 0.380 3.240 4.322 3.578 7.157 22,444 23,213
15.70 S-135 IU 46,500 583,400 0.380 3.240 4.322 3.578 7.157 22,444 23,213
15.70 S-135 IU 46,500 583,400 0.380 3.240 4.322 3.578 7.157 22,444 23,213
15.70 S-135 IU 46,500 583,400 0.380 3.240 4.322 3.578 7.157 22,444 23,213
4 15.70 Z-140 IU 48,200 605,000 0.380 3.240 4.322 3.578 7.157 23,275 24,073
15.70 Z-140 IU 48,200 605,000 0.380 3.240 4.322 3.578 7.157 23,275 24,073
15.70 Z-140 IU 48,200 605,000 0.380 3.240 4.322 3.578 7.157 23,275 24,073
15.70 Z-140 IU 48,200 605,000 0.380 3.240 4.322 3.578 7.157 23,275 24,073
4 15.70 V-150 IU 51,600 648,200 0.380 3.240 4.322 3.578 7.157 24,938 25,793
15.70 V-150 IU 51,600 648,200 0.380 3.240 4.322 3.578 7.157 24,938 25,793
15.70 V-150 IU 51,600 648,200 0.380 3.240 4.322 3.578 7.157 24,938 25,793
15.70 V-150 IU 51,600 648,200 0.380 3.240 4.322 3.578 7.157 24,938 25,793

12. Tool Joint Data Assembly Data
Torsional Minimum
Torsional Tensile Ratio Pin Box Tool Joint
Connection Outside Inside Yield Yield Make-up Tool Joint Tong Tong Adjusted OD for Drift Displace- Size
Type Diameter Diameter Strength Strength Torque to Pipe Space Space Weight Prem. Class Diameter Capacity ment OD
in. in. ft-lb lb ft-lb in. in. lb/ft in. in. US gal/ft US gal/ft in.
* *
55© Grant Prideco. All rights reserved. December 2003
D R I L L pipe data ta b le s
55© Grant Prideco. All rights reserved. December 2003
*2” Longer than standard.
While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information
contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this
material. No expressed or implied warranty is intended.
NC40 5 1/2 2 36,400 1,080,100 18,900 0.87 9 12 17.15 5 3/16 1 7/16 0.433 0.262 4
HT38 5 2 7/16 33,000 708,100 19,800 0.79 10 15.5 16.13 4 11/16 2 5/16 0.438 0.247
SH 4 3/4 2 7/16 17,100 570,900 9,100 0.41 9 12 15.31 N/A 2 5/16 0.440 0.234
HT40 5 1/4 2 11/16 35,900 776,400 21,500 0.86 9 15 16.12 4 29/32 2 9/16 0.442 0.247
NC46 6 3 39,200 1,048,400 20,500 0.94 9 12 16.90 5 9/16 2 7/8 0.449 0.259
XT38 4 3/4 2 9/16 31,300 599,600 18,800 0.75 10 15 15.44 4 17/32 2 7/16 0.440 0.236
XT39 4 7/8 2 9/16 37,000 729,700 22,200 0.88 10 15 15.67 4 17/32 2 7/16 0.440 0.240
GPDS40 5 1/4 2 11/16 32,700 776,400 19,600 0.78 9 12 15.82 5 2 9/16 0.443 0.242
HT38 5 2 7/16 33,000 708,100 19,800 0.76 10 15.5 16.13 4 23/32 2 5/16 0.438 0.247 4
HT40 5 1/4 2 11/16 35,900 776,400 21,500 0.83 9 15 16.12 4 15/16 2 9/16 0.442 0.247
XT38 4 3/4 2 9/16 31,300 599,600 18,800 0.72 10 15 15.44 4 9/16 2 7/16 0.440 0.236
XT39 4 7/8 2 9/16 37,000 729,700 22,200 0.85 10 15 15.67 4 9/16 2 7/16 0.440 0.240
GPDS40 5 1/4 2 9/16 34,600 838,300 21,800 0.84 9 12 15.99 5 2 7/16 0.441 0.245
HT38 5 2 7/16 33,000 708,100 19,800 0.71 10 15.5 16.13 4 25/32 2 5/16 0.438 0.247 4
HT40 5 1/4 2 11/16 35,900 776,400 21,500 0.77 9 15 16.12 5 2 9/16 0.442 0.247
XT38 4 3/4 2 7/16 34,200 658,500 20,500 0.73 10 15 15.61 4 19/32 2 5/16 0.438 0.239
XT39 4 7/8 2 9/16 37,000 729,700 22,200 0.79 10 15 15.67 4 5/8 2 7/16 0.440 0.240
GPDS40 5 1/4 2 9/16 36,400 838,300 21,800 0.78 9 12 15.99 5 1/32 2 7/16 0.441 0.245
NC40 5 1/4 2 13/16 23,500 711,600 12,400 0.91 9 12 17.22 4 7/8 2 11/16 0.421 0.263 4
HT40 5 1/4 2 13/16 31,900 711,600 19,100 1.24 9 15 17.49 4 5/8 2 11/16 0.420 0.268
H90 5 1/2 2 13/16 35,400 913,700 20,400 1.37 9 12 17.67 4 31/32 2 11/16 0.420 0.270
NC46 6 3 39,200 1,048,400 20,500 1.52 9 12 18.34 5 5/16 2 7/8 0.424 0.281
XT39 4 7/8 2 9/16 37,000 729,700 22,200 1.43 10 15 17.24 4 5/32 2 7/16 0.415 0.264
XT40 5 1/4 2 13/16 44,000 751,600 26,400 1.71 10 15 17.59 4 5/16 2 11/16 0.420 0.269
NC40 5 1/4 2 9/16 27,800 838,300 14,600 0.85 9 12 17.57 5 2 7/16 0.417 0.269 4
HT40 5 1/4 2 13/16 31,900 711,600 19,100 0.98 9 15 17.49 4 25/32 2 11/16 0.420 0.268
H90 5 1/2 2 13/16 35,400 913,700 20,400 1.08 9 12 17.67 5 3/32 2 11/16 0.420 0.270
NC46 6 3 39,200 1,048,400 20,500 1.20 9 12 18.49 5 7/16 2 7/8 0.424 0.283
XT39 4 7/8 2 9/16 37,000 729,700 22,200 1.13 10 15 17.24 4 5/16 2 7/16 0.415 0.264
XT40 5 1/4 2 13/16 44,000 751,600 26,400 1.35 10 15 17.59 4 15/32 2 11/16 0.420 0.269
NC40 5 1/2 2 7/16 30,100 897,200 15,600 0.83 9 12 18.20 5 1/16 2 5/16 0.414 0.278 4
HT40 5 1/4 2 13/16 31,900 711,600 19,100 0.88 9 15 17.49 4 27/32 2 11/16 0.420 0.268
H90 5 1/2 2 13/16 35,400 913,700 20,400 0.98 9 15 18.00 5 5/32 2 11/16 0.420 0.275
NC46 6 3 39,200 1,048,400 20,500 1.09 9 12 18.49 5 15/32 2 7/8 0.424 0.283
XT39 4 7/8 2 9/16 37,000 729,700 22,200 1.02 10 15 17.24 4 13/32 2 7/16 0.415 0.264
XT40 5 1/4 2 13/16 44,000 751,600 26,400 1.22 10 15 17.59 4 17/32 2 11/16 0.420 0.269
NC40 5 1/2 2 36,400 1,080,100 18,900 0.78 9 12 18.73 5 1/4 1 7/8 0.409 0.286 4
HT40 5 1/2 2 9/16 39,500 838,300 23,700 0.85 9 15 17.88 4 15/16 2 7/16 0.415 0.273
H90 5 3/4 2 11/16 38,400 978,500 21,800 0.83 9 15 18.74 5 5/16 2 9/16 0.417 0.287
NC46 6 3 39,200 1,048,400 20,500 0.84 9 12 18.49 5 21/32 2 7/8 0.424 0.283
XT39 4 7/8 2 9/16 37,000 729,700 22,200 0.80 10 15 17.24 4 5/8 2 7/16 0.415 0.264
XT40 5 1/4 2 13/16 44,000 751,600 26,400 0.95 10 15 17.59 4 3/4 2 11/16 0.420 0.269
GPDS40 5 1/4 2 9/16 36,400 838,300 21,800 0.78 9 12 17.57 5 1/32 2 7/16 0.417 0.269
HT40 5 1/4 2 9/16 39,500 838,300 23,700 0.82 9 15 17.88 4 31/32 2 7/16 0.415 0.273 4
XT39 4 7/8 2 9/16 37,000 729,700 22,200 0.77 10 15 17.24 4 21/32 2 7/16 0.415 0.264
XT40 5 1/4 2 13/16 44,000 751,600 26,400 0.91 10 15 17.59 4 25/32 2 11/16 0.420 0.269
GPDS40 5 1/4 2 9/16 36,400 868,300 21,800 0.76 9 12 17.57 5 1/16 2 7/16 0.417 0.269
HT40 5 1/4 2 7/16 41,000 897,200 24,600 0.79 9 15 18.05 5 2 5/16 0.413 0.276 4
XT39 4 7/8 2 9/16 37,000 729,700 22,200 0.72 10 15 17.24 4 25/32 2 7/16 0.415 0.264
XT40 5 1/4 2 11/16 48,100 816,400 28,900 0.93 10 15 17.79 4 25/32 2 9/16 0.417 0.272
GPDS40 5 1/4 2 7/16 38,100 897,200 22,900 0.74 9 12 17.74 5 3/32 2 5/16 0.415 0.271

13. Grade Pipe Body
and Torsional Tensile Pipe Body Pipe Body Polar
Size Nominal Upset Yield Yield Wall Nominal Section Section Section Internal Collapse
OD Weight Type Strength Strength Thickness ID Area Modulus Modulus Pressure Pressure
in. lb/ft ft-lb lb in. in. sq in. cu in. cu in. psi psi
Pipe Data
56 © Grant Prideco. All rights reserved. December 2003
G R A N T P R I D E C O
Drill pipe data tables
While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information
contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this
material. No expressed or implied warranty is intended.
4 1/2 16.60 E-75 IEU 30,800 330,600 0.337 3.826 4.407 4.271 8.543 9,829 10,392
16.60 E-75 EU 30,800 330,600 0.337 3.826 4.407 4.271 8.543 9,829 10,392
16.60 E-75 IEU 30,800 330,600 0.337 3.826 4.407 4.271 8.543 9,829 10,392
16.60 E-75 IEU 30,800 330,600 0.337 3.826 4.407 4.271 8.543 9,829 10,392
16.60 E-75 IEU 30,800 330,600 0.337 3.826 4.407 4.271 8.543 9,829 10,392
16.60 E-75 EU 30,800 330,600 0.337 3.826 4.407 4.271 8.543 9,829 10,392
16.60 E-75 EU 30,800 330,600 0.337 3.826 4.407 4.271 8.543 9,829 10,392
16.60 E-75 IEU 30,800 330,600 0.337 3.826 4.407 4.271 8.543 9,829 10,392
16.60 E-75 IEU 30,800 330,600 0.337 3.826 4.407 4.271 8.543 9,829 10,392
16.60 E-75 EU 30,800 330,600 0.337 3.826 4.407 4.271 8.543 9,829 10,392
4 1/2 16.60 X-95 IEU 39,000 418,700 0.337 3.826 4.407 4.271 8.543 12,450 12,765
16.60 X-95 EU 39,000 418,700 0.337 3.826 4.407 4.271 8.543 12,450 12,765
16.60 X-95 IEU 39,000 418,700 0.337 3.826 4.407 4.271 8.543 12,450 12,765
16.60 X-95 IEU 39,000 418,700 0.337 3.826 4.407 4.271 8.543 12,450 12,765
16.60 X-95 IEU 39,000 418,700 0.337 3.826 4.407 4.271 8.543 12,450 12,765
16.60 X-95 EU 39,000 418,700 0.337 3.826 4.407 4.271 8.543 12,450 12,765
16.60 X-95 EU 39,000 418,700 0.337 3.826 4.407 4.271 8.543 12,450 12,765
16.60 X-95 IEU 39,000 418,700 0.337 3.826 4.407 4.271 8.543 12,450 12,765
16.60 X-95 IEU 39,000 418,700 0.337 3.826 4.407 4.271 8.543 12,450 12,765
16.60 X-95 EU 39,000 418,700 0.337 3.826 4.407 4.271 8.543 12,450 12,765
4 1/2 16.60 G-105 IEU 43,100 462,800 0.337 3.826 4.407 4.271 8.543 13,761 13,825
16.60 G-105 EU 43,100 462,800 0.337 3.826 4.407 4.271 8.543 13,761 13,825
16.60 G-105 IEU 43,100 462,800 0.337 3.826 4.407 4.271 8.543 13,761 13,825
16.60 G-105 IEU 43,100 462,800 0.337 3.826 4.407 4.271 8.543 13,761 13,825
16.60 G-105 IEU 43,100 462,800 0.337 3.826 4.407 4.271 8.543 13,761 13,825
16.60 G-105 EU 43,100 462,800 0.337 3.826 4.407 4.271 8.543 13,761 13,825
16.60 G-105 EU 43,100 462,800 0.337 3.826 4.407 4.271 8.543 13,761 13,825
16.60 G-105 IEU 43,100 462,800 0.337 3.826 4.407 4.271 8.543 13,761 13,825
16.60 G-105 IEU 43,100 462,800 0.337 3.826 4.407 4.271 8.543 13,761 13,825
16.60 G-105 EU 43,100 462,800 0.337 3.826 4.407 4.271 8.543 13,761 13,825
4 1/2 16.60 S-135 IEU 55,500 595,000 0.337 3.826 4.407 4.271 8.543 17,693 16,773
16.60 S-135 EU 55,500 595,000 0.337 3.826 4.407 4.271 8.543 17,693 16,773
16.60 S-135 IEU 55,500 595,000 0.337 3.826 4.407 4.271 8.543 17,693 16,773
16.60 S-135 IEU 55,500 595,000 0.337 3.826 4.407 4.271 8.543 17,693 16,773
16.60 S-135 IEU 55,500 595,000 0.337 3.826 4.407 4.271 8.543 17,693 16,773
16.60 S-135 EU 55,500 595,000 0.337 3.826 4.407 4.271 8.543 17,693 16,773
16.60 S-135 EU 55,500 595,000 0.337 3.826 4.407 4.271 8.543 17,693 16,773
16.60 S-135 IEU 55,500 595,000 0.337 3.826 4.407 4.271 8.543 17,693 16,773
16.60 S-135 IEU 55,500 595,000 0.337 3.826 4.407 4.271 8.543 17,693 16,773
16.60 S-135 EU 55,500 595,000 0.337 3.826 4.407 4.271 8.543 17,693 16,773
16.60 S-135 IEU 55,500 595,000 0.337 3.826 4.407 4.271 8.543 17,693 16,773
4 1/2 16.60 Z-140 IEU 57,500 617,000 0.337 3.826 4.407 4.271 8.543 18,348 17,228
16.60 Z-140 EU 57,500 617,000 0.337 3.826 4.407 4.271 8.543 18,348 17,228
16.60 Z-140 IEU 57,500 617,000 0.337 3.826 4.407 4.271 8.543 18,348 17,228
16.60 Z-140 IEU 57,500 617,000 0.337 3.826 4.407 4.271 8.543 18,348 17,228
16.60 Z-140 EU 57,500 617,000 0.337 3.826 4.407 4.271 8.543 18,348 17,228
16.60 Z-140 IEU 57,500 617,000 0.337 3.826 4.407 4.271 8.543 18,348 17,228
4 1/2 16.60 V-150 IEU 61,600 661,100 0.337 3.826 4.407 4.271 8.543 19,658 18,103
16.60 V-150 EU 61,600 661,100 0.337 3.826 4.407 4.271 8.543 19,658 18,103
16.60 V-150 IEU 61,600 661,100 0.337 3.826 4.407 4.271 8.543 19,658 18,103
16.60 V-150 IEU 61,600 661,100 0.337 3.826 4.407 4.271 8.543 19,658 18,103
16.60 V-150 EU 61,600 661,100 0.337 3.826 4.407 4.271 8.543 19,658 18,103
16.60 V-150 IEU 61,600 661,100 0.337 3.826 4.407 4.271 8.543 19,658 18,103

14. Tool Joint Data Assembly Data
Torsional Minimum
Torsional Tensile Ratio Pin Box Tool Joint
Connection Outside Inside Yield Yield Make-up Tool Joint Tong Tong Adjusted OD for Drift Displace- Size
Type Diameter Diameter Strength Strength Torque to Pipe Space Space Weight Prem. Class Diameter Capacity ment OD
in. in. ft-lb lb ft-lb in. in. lb/ft in. in. US gal/ft US gal/ft in.
* *
57© Grant Prideco. All rights reserved. December 2003
D R I L L pipe data ta b le s
While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information
contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this
material. No expressed or implied warranty is intended.
*2” Longer than standard.
NC46 6 1/4 3 1/4 34,000 901,200 17,600 1.10 9 12 19.14 5 13/32 3 1/8 0.585 0.293 4 1/2
OH 5 7/8 3 3/4 27,300 714,000 14,600 0.89 9 12 17.58 5 15/32 3 5/8 0.596 0.269
FH 6 3 34,800 976,200 17,600 1.13 9 12 19.03 5 3/8 2 7/8 0.580 0.291
H90 6 3 1/4 39,000 938,400 18,800 1.27 9 12 18.61 5 11/32 3 1/8 0.585 0.285
HT46 6 1/4 3 1/4 47,600 901,200 28,600 1.55 9 15 19.59 5 13/32 3 1/8 0.583 0.300
NC50 6 5/8 3 3/4 38,100 939,100 19,800 1.24 9 12 19.19 5 23/32 3 5/8 0.595 0.294
HT50 6 1/4 3 3/4 52,700 939,100 31,600 1.71 9 15 18.73 5 13/16 3 5/8 0.595 0.287
XT40 5 1/4 3 37,400 648,900 22,400 1.21 10 15 17.92 4 7/8 2 7/8 0.579 0.274
XT46 6 3 1/2 58,100 910,300 34,900 1.89 10 15 18.63 5 5/8 3 3/8 0.589 0.285
XT50 6 3/8 3 3/4 75,200 1,085,500 45,100 2.44 10 15 19.17 5 31/32 3 5/8 0.595 0.293
NC46 6 1/4 3 1/4 34,000 901,200 17,600 0.87 9 12 19.14 5 17/32 3 1/8 0.585 0.293 4 1/2
OH 5 7/8 3 1/2 33,900 884,800 18,200 0.87 9 12 18.02 5 19/32 3 3/8 0.590 0.276
FH 6 3 34,800 976,200 17,600 0.89 9 12 19.03 5 1/2 2 7/8 0.580 0.291
H90 6 3 1/4 39,000 938,400 18,800 1.00 9 12 18.61 5 15/32 3 1/8 0.585 0.285
HT46 6 1/4 3 1/4 47,600 901,200 28,600 1.22 9 15 19.59 5 13/32 3 1/8 0.583 0.300
NC50 6 5/8 3 3/4 38,100 939,100 19,800 0.98 9 12 19.19 5 27/32 3 5/8 0.595 0.294
HT50 6 1/4 3 3/4 52,700 939,100 31,600 1.35 9 15 18.73 5 13/16 3 5/8 0.595 0.287
XT40 5 1/4 3 37,400 648,900 22,400 0.96 10 15 17.92 4 7/8 2 7/8 0.579 0.274
XT46 6 3 1/2 58,100 910,300 34,900 1.49 10 15 18.63 5 5/8 3 3/8 0.589 0.285
XT50 6 3/8 3 3/4 75,200 1,085,500 45,100 1.93 10 15 19.17 5 31/32 3 5/8 0.595 0.293
NC46 6 1/4 3 39,700 1,048,400 20,500 0.92 9 12 19.57 5 19/32 2 7/8 0.580 0.299 4 1/2
OH 6 3 1/4 40,300 1,043,800 21,500 0.94 9 12 18.69 5 21/32 3 1/8 0.585 0.286
FH 6 1/4 2 3/4 40,200 1,111,600 20,100 0.93 9 12 19.96 5 9/16 2 5/8 0.575 0.305
H90 6 3 1/4 39,000 938,400 18,800 0.90 9 12 18.61 5 17/32 3 1/8 0.585 0.285
HT46 6 1/4 3 1/4 47,600 901,200 28,600 1.10 9 15 19.59 5 13/32 3 1/8 0.583 0.300
NC50 6 5/8 3 3/4 38,100 939,100 19,800 0.88 9 12 19.19 5 29/32 3 5/8 0.595 0.294
HT50 6 1/4 3 3/4 52,700 939,100 31,600 1.22 9 15 18.73 5 13/16 3 5/8 0.595 0.287
XT40 5 1/4 3 37,400 648,900 22,400 0.87 10 15 17.92 4 7/8 2 7/8 0.579 0.274
XT46 6 3 1/2 58,100 910,300 34,900 1.35 10 15 18.63 5 5/8 3 3/8 0.589 0.285
XT50 6 3/8 3 3/4 75,200 1,085,500 45,100 1.74 10 15 19.17 5 31/32 3 5/8 0.595 0.293
NC46 6 1/4 2 3/4 44,900 1,183,900 23,200 0.81 9 12 19.96 5 25/32 2 5/8 0.575 0.305 4 1/2
OH 6 3 43,400 1,191,100 24,600 0.78 9 12 19.07 5 13/16 2 7/8 0.581 0.292
FH 6 1/4 2 3/4 40,200 1,111,600 20,100 0.72 9 12 19.96 5 3/4 2 5/8 0.575 0.305
H90 6 1/4 2 3/4 51,500 1,221,100 24,600 0.93 9 12 19.96 5 11/16 2 5/8 0.575 0.305
HT46 6 1/4 3 1/4 47,600 901,200 28,600 0.86 9 15 19.59 5 1/2 3 1/8 0.583 0.300
NC50 6 5/8 3 1/2 45,100 1,109,900 23,400 0.81 9 12 19.65 6 1/16 3 3/8 0.590 0.295
HT50 6 3/8 3 1/2 65,700 1,109,900 39,400 1.18 9 15 19.52 5 13/16 3 3/8 0.589 0.301
XT40 5 1/4 2 13/16 44,000 751,600 26,400 0.79 10 15 18.23 4 15/16 2 11/16 0.575 0.299
XT46 6 3 1/2 58,100 910,300 34,900 1.05 10 15 18.63 5 5/8 3 3/8 0.589 0.279
XT50 6 3/8 3 3/4 75,200 1,085,500 45,100 1.35 10 15 19.17 5 31/32 3 5/8 0.595 0.293
GPDS46 6 1/4 3 1/4 43,300 901,200 26,000 0.78 9 12 19.14 5 19/32 3 1/8 0.585 0.293
HT46 6 1/4 3 1/4 47,600 901,200 28,600 0.83 9 15 19.59 5 17/32 3 1/8 0.583 0.300 4 1/2
HT50 6 3/8 3 1/2 65,700 1,109,900 39,400 1.14 9 15 19.52 5 13/16 3 3/8 0.589 0.299
XT40 5 1/4 2 13/16 44,000 751,600 26,400 0.77 10 15 18.23 4 31/32 2 11/16 0.575 0.279
XT46 6 3 1/2 58,100 910,300 34,900 1.01 10 15 18.63 5 5/8 3 3/8 0.589 0.285
XT50 6 3/8 3 3/4 75,200 1,085,500 45,100 1.31 10 15 19.17 5 31/32 3 5/8 0.595 0.293
GPDS46 6 1/4 3 1/4 43,300 901,200 26,000 0.75 9 12 19.14 5 5/8 3 1/8 0.585 0.293
HT46 6 1/4 3 1/4 47,600 901,200 28,600 0.77 9 15 19.59 5 19/32 3 1/8 0.583 0.300 4 1/2
HT50 6 3/8 3 1/2 65,700 1,109,900 39,400 1.07 9 15 19.52 5 13/16 3 3/8 0.589 0.299
XT40 5 1/4 2 13/16 44,000 751,600 26,400 0.71 10 15 18.23 5 1/16 2 11/16 0.575 0.279
XT46 6 1/4 3 1/4 70,200 1,069,300 42,100 1.14 10 15 19.74 5 5/8 3 1/8 0.583 0.302
XT50 6 3/8 3 1/2 81,200 1,256,300 48,700 1.32 10 15 19.67 5 31/32 3 3/8 0.589 0.301
GPDS46 6 1/4 3 1/4 43,300 901,200 26,000 0.70 9 12 19.14 5 11/16 3 1/8 0.585 0.293

15. Grade Pipe Body
and Torsional Tensile Pipe Body Pipe Body Polar
Size Nominal Upset Yield Yield Wall Nominal Section Section Section Internal Collapse
OD Weight Type Strength Strength Thickness ID Area Modulus Modulus Pressure Pressure
in. lb/ft ft-lb lb in. in. sq in. cu in. cu in. psi psi
Pipe Data
58 © Grant Prideco. All rights reserved. December 2003
G R A N T P R I D E C O
Drill pipe data tables
While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information
contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this
material. No expressed or implied warranty is intended.
4 1/2 20.00 E-75 IEU 36,900 412,400 0.430 3.640 5.498 5.116 10.232 12,542 12,964
20.00 E-75 EU 36,900 412,400 0.430 3.640 5.498 5.116 10.232 12,542 12,964
20.00 E-75 IEU 36,900 412,400 0.430 3.640 5.498 5.116 10.232 12,542 12,964
20.00 E-75 IEU 36,900 412,400 0.430 3.640 5.498 5.116 10.232 12,542 12,964
20.00 E-75 EU 36,900 412,400 0.430 3.640 5.498 5.116 10.232 12,542 12,964
20.00 E-75 EU 36,900 412,400 0.430 3.640 5.498 5.116 10.232 12,542 12,964
20.00 E-75 IEU 36,900 412,400 0.430 3.640 5.498 5.116 10.232 12,542 12,964
20.00 E-75 EU 36,900 412,400 0.430 3.640 5.498 5.116 10.232 12,542 12,964
4 1/2 20.00 X-95 IEU 46,700 522,300 0.430 3.640 5.498 5.116 10.232 15,886 16,421
20.00 X-95 EU 46,700 522,300 0.430 3.640 5.498 5.116 10.232 15,886 16,421
20.00 X-95 IEU 46,700 522,300 0.430 3.640 5.498 5.116 10.232 15,886 16,421
20.00 X-95 IEU 46,700 522,300 0.430 3.640 5.498 5.116 10.232 15,886 16,421
20.00 X-95 EU 46,700 522,300 0.430 3.640 5.498 5.116 10.232 15,886 16,421
20.00 X-95 EU 46,700 522,300 0.430 3.640 5.498 5.116 10.232 15,886 16,421
20.00 X-95 IEU 46,700 522,300 0.430 3.640 5.498 5.116 10.232 15,886 16,421
20.00 X-95 EU 46,700 522,300 0.430 3.640 5.498 5.116 10.232 15,886 16,421
4 1/2 20.00 G-105 IEU 51,700 577,300 0.430 3.640 5.498 5.116 10.232 17,558 18,149
20.00 G-105 EU 51,700 577,300 0.430 3.640 5.498 5.116 10.232 17,558 18,149
20.00 G-105 IEU 51,700 577,300 0.430 3.640 5.498 5.116 10.232 17,558 18,149
20.00 G-105 IEU 51,700 577,300 0.430 3.640 5.498 5.116 10.232 17,558 18,149
20.00 G-105 EU 51,700 577,300 0.430 3.640 5.498 5.116 10.232 17,558 18,149
20.00 G-105 EU 51,700 577,300 0.430 3.640 5.498 5.116 10.232 17,558 18,149
20.00 G-105 IEU 51,700 577,300 0.430 3.640 5.498 5.116 10.232 17,558 18,149
20.00 G-105 EU 51,700 577,300 0.430 3.640 5.498 5.116 10.232 17,558 18,149
4 1/2 20.00 S-135 IEU 66,400 742,200 0.430 3.640 5.498 5.116 10.232 22,575 23,335
20.00 S-135 EU 66,400 742,200 0.430 3.640 5.498 5.116 10.232 22,575 23,335
20.00 S-135 IEU 66,400 742,200 0.430 3.640 5.498 5.116 10.232 22,575 23,335
20.00 S-135 IEU 66,400 742,200 0.430 3.640 5.498 5.116 10.232 22,575 23,335
20.00 S-135 EU 66,400 742,200 0.430 3.640 5.498 5.116 10.232 22,575 23,335
20.00 S-135 EU 66,400 742,200 0.430 3.640 5.498 5.116 10.232 22,575 23,335
20.00 S-135 IEU 66,400 742,200 0.430 3.640 5.498 5.116 10.232 22,575 23,335
20.00 S-135 EU 66,400 742,200 0.430 3.640 5.498 5.116 10.232 22,575 23,335
20.00 S-135 IEU 66,400 742,200 0.430 3.640 5.498 5.116 10.232 22,575 23,335
4 1/2 20.00 Z-140 IEU 68,900 769,700 0.430 3.640 5.498 5.116 10.232 23,411 24,199
20.00 Z-140 EU 68,900 769,700 0.430 3.640 5.498 5.116 10.232 23,411 24,199
20.00 Z-140 IEU 68,900 769,700 0.430 3.640 5.498 5.116 10.232 23,411 24,199
20.00 Z-140 EU 68,900 769,700 0.430 3.640 5.498 5.116 10.232 23,411 24,199
20.00 Z-140 IEU 68,900 769,700 0.430 3.640 5.498 5.116 10.232 23,411 24,199
4 1/2 20.00 V-150 IEU 73,800 824,700 0.430 3.640 5.498 5.116 10.232 25,083 25,927
20.00 V-150 EU 73,800 824,700 0.430 3.640 5.498 5.116 10.232 25,083 25,927
20.00 V-150 IEU 73,800 824,700 0.430 3.640 5.498 5.116 10.232 25,083 25,927
20.00 V-150 EU 73,800 824,700 0.430 3.640 5.498 5.116 10.232 25,083 25,927
20.00 V-150 IEU 73,800 824,700 0.430 3.640 5.498 5.116 10.232 25,083 25,927
5 19.50 E-75 IEU 41,200 395,600 0.362 4.276 5.275 5.708 11.415 9,503 9,962
19.50 E-75 IEU 41,200 395,600 0.362 4.276 5.275 5.708 11.415 9,503 9,962
19.50 E-75 IEU 41,200 395,600 0.362 4.276 5.275 5.708 11.415 9,503 9,962
19.50 E-75 IEU 41,200 395,600 0.362 4.276 5.275 5.708 11.415 9,503 9,962
19.50 E-75 IEU 41,200 395,600 0.362 4.276 5.275 5.708 11.415 9,503 9,962

16. Tool Joint Data Assembly Data
Torsional Minimum
Torsional Tensile Ratio Pin Box Tool Joint
Connection Outside Inside Yield Yield Make-up Tool Joint Tong Tong Adjusted OD for Drift Displace- Size
Type Diameter Diameter Strength Strength Torque to Pipe Space Space Weight Prem. Class Diameter Capacity ment OD
in. in. ft-lb lb ft-lb in. in. lb/ft in. in. US gal/ft US gal/ft in.
* *
59© Grant Prideco. All rights reserved. December 2003
D R I L L pipe data ta b le s
*2” Longer than standard.
While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information
contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this
material. No expressed or implied warranty is intended.
NC46 6 1/4 3 39,700 1,048,400 20,500 1.08 9 12 22.89 5 1/2 2 7/8 0.527 0.350 4 1/2
OH 6 3 1/2 34,100 884,800 18,200 0.92 9 12 21.64 5 17/32 3 3/8 0.538 0.331
H90 6 3 1/4 39,000 938,400 18,800 1.06 9 12 21.94 5 7/16 3 1/8 0.532 0.336
HT46 6 1/4 3 1/4 47,600 901,200 28,600 1.29 9 15 22.89 5 13/32 3 1/8 0.531 0.350
NC50 6 5/8 3 5/8 41,700 1,026,000 21,600 1.13 9 12 22.77 5 13/16 3 1/2 0.540 0.348
HT50 6 1/4 3 5/8 59,200 1,026,000 35,500 1.60 9 15 22.31 5 13/16 3 1/2 0.540 0.341
XT46 6 3 1/2 58,100 910,300 34,900 1.57 10 15 21.93 5 5/8 3 3/8 0.537 0.335
XT50 6 3/8 3 1/2 81,200 1,256,300 48,700 2.20 10 15 22.99 5 31/32 3 3/8 0.537 0.352
NC46 6 1/4 3 39,700 1,048,400 20,500 0.85 9 12 22.89 5 21/32 2 7/8 0.527 0.350 4 1/2
OH 6 1/4 3 1/4 40,700 1,043,800 21,500 0.87 9 12 22.58 5 11/16 3 1/8 0.533 0.345
H90 6 3 1/4 39,000 938,400 18,800 0.84 9 12 21.94 5 9/16 3 1/8 0.532 0.336
HT46 6 1/4 3 1/4 47,600 901,200 28,600 1.02 9 15 22.89 5 13/32 3 1/8 0.531 0.350
NC50 6 5/8 3 1/2 41,500 1,109,900 23,400 0.97 9 12 23.00 5 15/16 3 3/8 0.538 0.352
HT50 6 1/4 3 1/2 62,700 1,109,900 37,600 1.34 9 15 22.55 5 13/16 3 3/8 0.537 0.345
XT46 6 3 1/2 58,100 910,300 34,900 1.24 10 15 21.93 5 5/8 3 3/8 0.537 0.335
XT50 6 3/8 3 1/2 81,200 1,256,300 48,700 1.74 10 15 22.99 5 31/32 3 3/8 0.537 0.352
NC46 6 1/4 2 3/4 44,900 1,183,900 23,200 0.87 9 12 23.28 5 23/32 2 5/8 0.523 0.356 4 1/2
OH 6 1/4 3 46,600 1,191,100 24,600 0.90 9 12 22.97 5 3/4 2 7/8 0.528 0.351
H90 6 1/4 3 45,700 1,085,700 21,800 0.88 9 12 22.89 5 5/8 2 7/8 0.527 0.350
HT46 6 1/4 3 1/4 47,600 901,200 28,600 0.92 9 15 22.89 5 7/16 3 1/8 0.531 0.350
NC50 6 5/8 3 1/2 45,100 1,109,900 23,400 0.87 9 12 23.00 6 1/32 3 3/8 0.538 0.352
HT50 6 1/4 3 1/2 62,700 1,109,900 37,600 1.21 9 15 22.55 5 13/16 3 3/8 0.537 0.345
XT46 6 3 1/2 58,100 910,300 34,900 1.12 10 15 21.93 5 5/8 3 3/8 0.537 0.335
XT50 6 3/8 3 1/2 81,200 1,256,300 48,700 1.57 10 15 22.99 5 31/32 3 3/8 0.537 0.352
NC46 6 1/4 2 3/4 44,900 1,183,900 23,200 0.68 9 12 23.28 5 15/16 2 5/8 0.523 0.356 4 1/2
OH 6 3/8 2 3/4 52,200 1,326,600 27,400 0.79 9 12 23.61 5 31/32 2 5/8 0.524 0.361
H90 6 3/8 2 3/4 51,700 1,221,100 24,600 0.78 9 12 23.57 5 27/32 2 5/8 0.523 0.360
HT46 6 1/4 3 57,700 1,048,400 34,600 0.87 9 15 23.34 5 9/16 2 7/8 0.526 0.357
NC50 6 5/8 3 1/4 51,700 1,269,000 26,800 0.78 9 12 23.43 6 7/32 3 1/8 0.532 0.358
HT50 6 3/8 3 1/2 65,700 1,109,900 39,400 0.99 9 15 23.85 5 13/16 3 3/8 0.537 0.350
XT46 6 3 1/4 64,800 1,069,300 38,900 0.98 10 15 22.42 5 5/8 3 1/8 0.531 0.343
XT50 6 3/8 3 1/2 81,200 1,256,300 48,700 1.22 10 15 23.99 5 31/32 3 3/8 0.537 0.352
GPDS46 6 1/4 3 53,400 1,048,400 32,000 0.80 9 12 22.89 5 21/32 2 7/8 0.527 0.350
HT46 6 1/4 3 57,700 1,048,400 34,600 0.84 9 15 23.34 5 19/32 2 7/8 0.526 0.357 4 1/2
HT50 6 3/8 3 1/2 65,700 1,109,900 39,400 0.95 9 15 22.85 5 27/32 3 3/8 0.537 0.350
XT46 6 3 1/4 64,800 1,069,300 38,900 0.94 10 15 22.42 5 5/8 3 1/8 0.531 0.343
XT50 6 3/8 3 1/2 81,200 1,256,300 48,700 1.18 10 15 22.99 5 31/32 3 3/8 0.537 0.352
GPDS46 6 1/4 3 53,400 1,048,400 32,000 0.78 9 12 22.89 5 11/16 2 7/8 0.527 0.350
HT46 6 1/4 3 57,700 1,048,400 34,600 0.78 9 15 23.34 5 21/32 2 7/8 0.526 0.357 4 1/2
HT50 6 3/8 3 1/2 65,700 1,109,900 39,400 0.89 9 15 22.85 5 29/32 3 3/8 0.537 0.350
XT46 6 1/4 3 1/8 75,700 1,144,400 45,400 1.03 10 15 23.26 5 5/8 3 0.528 0.356
XT50 6 3/8 3 1/2 81,200 1,256,300 48,700 1.10 10 15 22.99 5 31/32 3 3/8 0.537 0.352
GPDS46 6 1/4 3 53,400 1,048,400 32,000 0.72 9 12 22.89 5 3/4 2 7/8 0.527 0.350
NC50 6 5/8 3 3/4 38,100 939,100 19,800 0.92 9 12 22.12 5 7/8 3 5/8 0.733 0.338 5
HT50 6 5/8 3 3/4 53,300 939,100 32,000 1.29 9 15 22.57 5 13/16 3 5/8 0.732 0.345
FH 7 3 3/4 62,900 1,448,400 33,400 1.53 10 12 23.20 6 3/8 3 5/8 0.732 0.355
XT46 6 3 1/2 36,500 910,300 21,900 0.89 10 15 21.69 5 5/8 3 3/8 0.726 0.332
XT50 6 1/2 4 38,700 902,900 23,200 0.94 10 15 21.83 5 31/32 3 7/8 0.738 0.334

17. Grade Pipe Body
and Torsional Tensile Pipe Body Pipe Body Polar
Size Nominal Upset Yield Yield Wall Nominal Section Section Section Internal Collapse
OD Weight Type Strength Strength Thickness ID Area Modulus Modulus Pressure Pressure
in. lb/ft ft-lb lb in. in. sq in. cu in. cu in. psi psi
Pipe Data
60 © Grant Prideco. All rights reserved. December 2003
G R A N T P R I D E C O
Drill pipe data tables
While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information
contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this
material. No expressed or implied warranty is intended.
5 19.50 X-95 IEU 52,100 501,100 0.362 4.276 5.275 5.708 11.415 12,037 12,026
19.50 X-95 IEU 52,100 501,100 0.362 4.276 5.275 5.708 11.415 12,037 12,026
19.50 X-95 IEU 52,100 501,100 0.362 4.276 5.275 5.708 11.415 12,037 12,026
19.50 X-95 IEU 52,100 501,100 0.362 4.276 5.275 5.708 11.415 12,037 12,026
19.50 X-95 IEU 52,100 501,100 0.362 4.276 5.275 5.708 11.415 12,037 12,026
5 19.50 G-105 IEU 57,600 553,800 0.362 4.276 5.275 5.708 11.415 13,304 12,999
19.50 G-105 IEU 57,600 553,800 0.362 4.276 5.275 5.708 11.415 13,304 12,999
19.50 G-105 IEU 57,600 553,800 0.362 4.276 5.275 5.708 11.415 13,304 12,999
19.50 G-105 IEU 57,600 553,800 0.362 4.276 5.275 5.708 11.415 13,304 12,999
19.50 G-105 IEU 57,600 553,800 0.362 4.276 5.275 5.708 11.415 13,304 12,999
19.50 G-105 IEU 57,600 553,800 0.362 4.276 5.275 5.708 11.415 13,304 12,999
5 19.50 S-135 IEU 74,100 712,100 0.362 4.276 5.275 5.708 11.415 17,105 15,672
19.50 S-135 IEU 74,100 712,100 0.362 4.276 5.275 5.708 11.415 17,105 15,672
19.50 S-135 IEU 74,100 712,100 0.362 4.276 5.275 5.708 11.415 17,105 15,672
19.50 S-135 IEU 74,100 712,100 0.362 4.276 5.275 5.708 11.415 17,105 15,672
19.50 S-135 IEU 74,100 712,100 0.362 4.276 5.275 5.708 11.415 17,105 15,672
19.50 S-135 IEU 74,100 712,100 0.362 4.276 5.275 5.708 11.415 17,105 15,672
5 19.50 Z-140 IEU 76,800 738,400 0.362 4.276 5.275 5.708 11.415 17,738 16,079
19.50 Z-140 IEU 76,800 738,400 0.362 4.276 5.275 5.708 11.415 17,738 16,079
19.50 Z-140 IEU 76,800 738,400 0.362 4.276 5.275 5.708 11.415 17,738 16,079
19.50 Z-140 IEU 76,800 738,400 0.362 4.276 5.275 5.708 11.415 17,738 16,079
5 19.50 V-150 IEU 82,300 791,200 0.362 4.276 5.275 5.708 11.415 19,005 16,858
19.50 V-150 IEU 82,300 791,200 0.362 4.276 5.275 5.708 11.415 19,005 16,858
19.50 V-150 IEU 82,300 791,200 0.362 4.276 5.275 5.708 11.415 19,005 16,858
19.50 V-150 IEU 82,300 791,200 0.362 4.276 5.275 5.708 11.415 19,005 16,858
5 25.60 E-75 IEU 52,300 530,100 0.500 4.000 7.069 7.245 14.491 13,125 13,500
25.60 E-75 IEU 52,300 530,100 0.500 4.000 7.069 7.245 14.491 13,125 13,500
25.60 E-75 IEU 52,300 530,100 0.500 4.000 7.069 7.245 14.491 13,125 13,500
25.60 E-75 IEU 52,300 530,100 0.500 4.000 7.069 7.245 14.491 13,125 13,500
5 25.60 X-95 IEU 66,200 671,500 0.500 4.000 7.069 7.245 14.491 16,625 17,100
25.60 X-95 IEU 66,200 671,500 0.500 4.000 7.069 7.245 14.491 16,625 17,100
25.60 X-95 IEU 66,200 671,500 0.500 4.000 7.069 7.245 14.491 16,625 17,100
25.60 X-95 IEU 66,200 671,500 0.500 4.000 7.069 7.245 14.491 16,625 17,100
5 25.60 G-105 IEU 73,200 742,200 0.500 4.000 7.069 7.245 14.491 18,375 18,900
25.60 G-105 IEU 73,200 742,200 0.500 4.000 7.069 7.245 14.491 18,375 18,900
25.60 G-105 IEU 73,200 742,200 0.500 4.000 7.069 7.245 14.491 18,375 18,900
25.60 G-105 IEU 73,200 742,200 0.500 4.000 7.069 7.245 14.491 18,375 18,900
25.60 G-105 IEU 73,200 742,200 0.500 4.000 7.069 7.245 14.491 18,375 18,900
5 25.60 S-135 IEU 94,100 954,300 0.500 4.000 7.069 7.245 14.491 23,625 24,300
25.60 S-135 IEU 94,100 954,300 0.500 4.000 7.069 7.245 14.491 23,625 24,300
25.60 S-135 IEU 94,100 954,300 0.500 4.000 7.069 7.245 14.491 23,625 24,300
25.60 S-135 IEU 94,100 954,300 0.500 4.000 7.069 7.245 14.491 23,625 24,300
25.60 S-135 IEU 94,100 954,300 0.500 4.000 7.069 7.245 14.491 23,625 24,300
5 25.60 Z-140 IEU 97,500 989,600 0.500 4.000 7.069 7.245 14.491 24,500 25,200
25.60 Z-140 IEU 97,500 989,600 0.500 4.000 7.069 7.245 14.491 24,500 25,200
25.60 Z-140 IEU 97,500 989,600 0.500 4.000 7.069 7.245 14.491 24,500 25,200
5 25.60 V-150 IEU 104,500 1,060,300 0.500 4.000 7.069 7.245 14.491 26,250 27,000
25.60 V-150 IEU 104,500 1,060,300 0.500 4.000 7.069 7.245 14.491 26,250 27,000
25.60 V-150 IEU 104,500 1,060,300 0.500 4.000 7.069 7.245 14.491 26,250 27,000

18. Tool Joint Data Assembly Data
Torsional Minimum
Torsional Tensile Ratio Pin Box Tool Joint
Connection Outside Inside Yield Yield Make-up Tool Joint Tong Tong Adjusted OD for Drift Displace- Size
Type Diameter Diameter Strength Strength Torque to Pipe Space Space Weight Prem. Class Diameter Capacity ment OD
in. in. ft-lb lb ft-lb in. in. lb/ft in. in. US gal/ft US gal/ft in.
* *
61© Grant Prideco. All rights reserved. December 2003
D R I L L pipe data ta b le s
*2” Longer than standard.
While every effort has been made to insure the accuracy of the tables herein, this material is presented as a reference guide only. The technical information
contained herein should not be construed as a recommendation. Grant Prideco cannot assume responsibility for the results obtained through the use of this
material. No expressed or implied warranty is intended.
NC50 6 5/8 3 1/2 45,100 1,109,900 23,400 0.87 9 12 22.61 6 1/32 3 3/8 0.727 0.346 5
HT50 6 5/8 3 3/4 53,300 939,100 32,000 1.02 9 15 22.57 5 13/16 3 5/8 0.732 0.345
FH 7 3 3/4 62,900 1,448,400 33,400 1.21 10 12 23.20 6 1/2 3 5/8 0.732 0.355
XT46 6 3 1/2 58,100 910,300 34,900 1.12 10 15 21.69 5 5/8 3 3/8 0.726 0.332
XT50 6 1/2 4 62,500 902,900 37,500 1.20 10 15 21.83 5 31/32 3 7/8 0.738 0.334
NC50 6 5/8 3 1/4 51,700 1,269,000 26,800 0.90 9 12 23.07 6 3/32 3 1/8 0.722 0.353 5
HT50 6 5/8 3 1/2 66,200 1,109,900 39,700 1.15 9 15 23.10 5 13/16 3 3/8 0.726 0.353
FH 7 3 3/4 62,900 1,448,400 33,400 1.09 10 12 23.20 6 9/16 3 5/8 0.732 0.355
XT46 6 3 1/2 58,100 910,300 34,900 1.01 10 15 21.69 5 5/8 3 3/8 0.726 0.332
XT50 6 1/2 4 62,500 902,900 37,500 1.09 10 15 21.83 5 31/32 3 7/8 0.738 0.334
GPDS50 6 5/8 3 1/2 60,400 1,110,200 36,200 1.05 9 12 21.61 5 13/16 3 3/8 0.727 0.346
NC50 6 5/8 2 3/4 63,400 1,551,700 32,900 0.86 9 12 23.89 6 5/16 2 5/8 0.713 0.365 5
HT50 6 5/8 3 1/2 66,200 1,109,900 39,700 0.89 9 15 23.10 5 15/16 3 3/8 0.726 0.353
FH 7 1/4 3 1/2 72,500 1,619,200 37,400 0.98 10 12 24.38 6 3/4 3 3/8 0.726 0.373
XT46 6 3 1/2 58,100 910,300 34,900 0.78 10 15 21.69 5 23/32 3 3/8 0.726 0.332
XT50 6 1/2 3 3/4 77,000 1,085,500 46,200 1.04 10 15 22.39 5 31/32 3 5/8 0.731 0.343
GPDS50 6 5/8 3 1/2 60,400 1,110,200 36,200 0.82 9 12 21.61 6 1/32 3 3/8 0.727 0.346
HT50 6 5/8 3 1/2 66,200 1,109,900 39,700 0.86 9 15 23.10 5 31/32 3 3/8 0.726 0.353 5
XT46 6 3 1/2 58,100 910,300 34,900 0.76 10 15 21.69 5 25/32 3 3/8 0.726 0.332
XT50 6 1/2 3 3/4 77,000 1,085,500 46,200 1.00 10 15 22.39 5 31/32 3 5/8 0.731 0.343
GPDS50 6 5/8 3 1/2 60,400 1,110,200 36,200 0.79 9 12 21.61 6 3/32 3 3/8 0.727 0.346
HT50 6 5/8 3 1/2 66,200 1,109,900 39,700 0.80 9 15 23.10 6 1/32 3 3/8 0.726 0.353 5
XT46 6 1/4 3 1/4 70,200 1,069,300 42,100 0.85 10 15 22.78 5 23/32 3 1/8 0.720 0.348
XT50 6 1/2 3 3/4 77,000 1,085,500 46,200 0.94 10 15 22.39 5 31/32 3 5/8 0.731 0.343
GPDS50 6 5/8 3 1/2 60,400 1,110,200 36,200 0.73 9 12 21.61 6 5/32 3 3/8 0.727 0.346
NC50 6 5/8 3 1/2 45,100 1,109,900 23,400 0.86 9 12 28.08 6 1/32 3 3/8 0.641 0.430 5
HT50 6 5/8 3 3/4 53,300 939,100 32,000 1.02 9 15 28.01 5 13/16 3 5/8 0.646 0.428
FH 7 3 1/2 62,900 1,619,200 37,400 1.20 10 12 29.16 6 1/2 3 3/8 0.641 0.446
XT50 6 5/8 3 3/4 77,300 1,085,500 46,400 1.48 10 15 28.14 5 31/32 3 5/8 0.646 0.430
NC50 6 5/8 3 57,800 1,416,200 30,000 0.87 9 12 28.97 6 7/32 2 7/8 0.631 0.443 5
HT50 6 5/8 3 1/2 66,200 1,109,900 39,700 1.00 9 15 28.53 5 13/16 3 3/8 0.640 0.436
FH 7 3 1/2 62,900 1,619,200 37,400 0.95 10 12 29.16 6 21/32 3 3/8 0.641 0.446
XT50 6 5/8 3 3/4 77,300 1,085,500 46,400 1.17 10 15 28.14 5 31/32 3 5/8 0.646 0.430
NC50 6 5/8 2 3/4 63,400 1,551,700 32,900 0.87 9 12 29.36 6 9/32 2 5/8 0.627 0.449 5
HT50 6 5/8 3 1/2 66,200 1,109,900 39,700 0.90 9 15 29.53 5 29/32 3 3/8 0.640 0.436
FH 7 1/4 3 1/2 72,500 1,619,200 37,400 0.99 10 12 29.82 6 23/32 3 3/8 0.640 0.456
XT50 6 5/8 3 3/4 77,300 1,085,500 46,400 1.06 10 15 28.14 5 31/32 3 5/8 0.646 0.430
GPDS50 6 5/8 3 1/2 60,400 1,110,200 36,200 0.83 9 12 28.08 6 1/32 3 3/8 0.641 0.430
NC50 6 5/8 2 3/4 63,400 1,551,700 32,900 0.67 9 12 29.36 6 17/32 2 5/8 0.627 0.449 5
HT50 6 5/8 3 1/2 66,200 1,109,900 39,700 0.70 9 15 29.53 6 3/16 3 3/8 0.640 0.436
FH 7 1/4 3 1/4 78,700 1,778,300 41,200 0.84 10 12 30.30 6 15/16 3 1/8 0.635 0.464
XT50 6 5/8 3 1/2 90,700 1,256,300 54,400 0.96 10 15 28.67 5 31/32 3 3/8 0.640 0.439
GPDS50 6 5/8 3 1/2 60,400 1,110,200 36,200 0.64 9 12 28.08 6 9/32 3 3/8 0.641 0.430
HT50 6 5/8 3 1/4 78,000 1,269,000 46,800 0.80 9 15 29.02 6 1/8 3 1/8 0.634 0.444 5
XT50 6 5/8 3 3/4 90,700 1,256,300 54,400 0.93 10 15 28.67 6 3 3/8 0.640 0.439
GPDS50 6 5/8 3 1/4 72,200 1,269,200 43,300 0.74 9 12 28.54 6 7/32 3 1/8 0.636 0.437
HT50 6 5/8 3 1/4 78,000 1,269,000 46,800 0.75 9 15 29.02 6 7/32 3 1/8 0.634 0.444 5
XT50 6 5/8 3 3/8 97,000 1,337,300 58,200 0.93 10 15 28.93 6 1/32 3 1/4 0.637 0.443
GPDS50 6 5/8 3 1/4 72,200 1,269,200 43,300 0.69 9 12 28.54 6 5/16 3 1/8 0.636 0.437