Ragnar Homb from Norwegian Creations gave a great introduction to 3D-printing for dummies both theoretically and practically at Girl Geek Dinner Trondheim's event 26. August 2015.
More information here: http://trondheim.girlgeekdinners.com/2015/12/15/3d-printing-101-en-innforing-for-nybegynnere/
2. Bridging the Gap between
Idea and Creation
facebook: NorwegianCreations
Instagram: NorwegianCreations
post@NorwegianCreations.com
www.NorwegianCreations.com
5. FIX MAKERSPACE
Opening Hours
Every day between 07:00 - 23:00 *
Rules
Soon available as printed version in the space
See: https://reg.fixtrondheim.no/#/soscon
Membership
Fixer - 499,- / month (299,- student)
Company - 2500,- / month (ex. tax)
Digster - 250,- / month (ex. tax)
https://reg.fixtrondheim.no
Trondheims first dedicated makerspace
6.
7.
8. AGENDA
• What is 3D-printing?
• Different types
• "In depth" about the most common type
• Alternatives to printing location
• Post-print work
• Demonstration: Going from model to 3D-print
54. MODELING FOR FDM - HOLES
• Usually to small after print
• Drill!
55. MODELEING FOR FDM - ASSEMBLY
• Glue
• Skrew
• Make mechanical threads
56. MODELEING FOR FDM - SOFTWARE
• Solid-modeling
• STL most common
• But STL is a surface modeling language: Control it for errors
• “Slicer”
57. RECAP• 3 most common types
• “Liquid” - SLA
• “Powder” - SLS
• “Thread” - FDM
• FDM - Challenges
• Overhang
• Warp
• Wall thickness
• …
• Road from model to 3D-print
• Usually through the file format STL
• STL is a surface modeling language, but a 3D-print is solid. Interpretation errors?
65. ORDERING 3D-PRINTING
• Exists many different suppliers
• Typical easy online quoting systems based on volume
• Different printers and different materials