Kirtesh Khandelwal Visual Basics Project

Project Report
2017
Visual Basic
Dezyne E’ Cole College
106/10, Civil Lines, Ajmer
Tel: 0145-2624679
www.dezyneecole.com
2016-2017
Submitted by:
Kirtesh Khandelwal
1

ACKNOWLEDGEMENT
We are extremely grateful and remain indebted to our guide MR. Tarun Sharma for
being a source of inspiration and for his constant support in the Design,
Implementation and Evaluation of the project.
We are thankful to them for their constant constructive criticism and invaluable
suggestions, which benefited us a lot while developing the project on “Restaurant
Billing System”. He has been a constant source of inspiration and motivation for hard
work. He has been very cooperative throughout this project work. Through this
column, it would be our utmost pleasure to express our warm thanks to him for their
encouragement, cooperation and consent without which we mightn’t be able to
accomplish this project.
We also express our gratitude to “Mrs. Vinita Mathur” for providing us the
infrastructure to carry out the project and to all staff members who were directly and
indirectly instrument in enabling us to stay committed for the project.
We also express our gratitude to our college “DEZYNE E’COLE COLLEGE” for
providing us the information to carry out the project and for providing us the
experienced mentors who were directly and indirectly instrument in enabling us to
stay committed for the project.

SYNOPSIS
We are creating a software that is Restaurant Billing System. This project is based on
McDonald’s billing of product according to Customer requirement.
This project gives information about:
1. Yearly, Monthly, Daily sales of product.
2. Yearly, Monthly, Daily Best Employee.
3. We can fetch the information or details about the Customers.
4. Only the Authorized person can access this Software.
5. Show the details about the product like product name, price, size etc.
6. Add new Employees and Admin only by the Admin.
7. Delete any Employee and Admin only by the Admin.
8. Easily switch from Admin to Employee panel and from Employee to Admin
panel.
9. Update the product according to Customer requirement.
10.Each Employee and Customer has its unique id so easy to fetch the detail.
11.Automation like auto Id concept, auto Password Generator auto Bill number
generator.
12.Re-generating of bill for the Customer facility.
So overall it give user friendly interface and have unique id and password so all data
is safe from the unauthorized person. This project provides all facilities that is
required in billing system.

Introduction of Information Technology
(IT)
Information Technology –
The term commonly used as a synonym for computers and computer mentors, but it
also emphasis other information distribution technologies such as television and
telephones.
Several industries are associated with information technology, including computer
hardware, software, electronics, semiconductors, internet, telecommunication
equipment and ecommerce. Human have been storing, retrieving, manipulating and
communicating information since the summaries in Mesopotamia developed
writing in about 3000BC, but the term information technology in the modern sense
first appeared in a 1958 article published in the Howard business Review, authors
Harold T. Leavitt and Thomas L. whisper commented that the new technology does
not yet have a single established name.
We shall call it information technology their definition consist of their categories.
Technique for processing, the application of statistical and mathematics method of
decision making and the simulation of higher order thinking through computer
program.
Based on the storage and processing technologies employed, it is possible to
distinguish four distinct phase of IT development: pre-mechanical (1450-1840),
electromechanical (18401940), electronic (1940-present) and moreover it as a
service. This article focuses on the most recent period (electronic), which began in
about 1940.
Set of tools, processes, and methodologies (such as coding, programming, data
communication, data conversion, storage & retrieval, system analysis & design,
system control) and associated equipment employee to collect process and present
information. In broad terms, it also includes office automation, multimedia and
Tele – communication.
Information Technology, a source we call the “computer”, that can show you
what information via Tele-portal, scoping, working calibration for transmitting
throughout the world.
More commonly known as I.T. is the most popular career and the fastest growing
industry in the world. There are several success stories about people who choose
this field for a career and are now on top of their game.
Information technology covers a board spectrum of hardware and software solution
that enable organizations to gather, organize and analyze data. It also details
technology based workflow processes.

Few reasons for why people choose IT –
 Low cost of education
The biggest advantage of choosing information technology for a career is that it
has very low cost of education as compared to many other career choices. You
don’t need degree to become an I.T. professional. Instead, you can get quick
training to be certified in specific areas of information technology. This way
you save huge amounts of money that you may have otherwise spent on years
of college tuition.
 Fastest changing industry
The information technology industry operates at a speed much faster than any
other industry and for this reason, there’s always a significant demand for
highly skilled workers with the innovations in cloud computing, big data and
cyber security an aspiring I.T. professional has many avenues to pursue and
grow from and I.T. professional never stops learning, and must always stay on
top of the latest technology trend in order to be successful in the field. The
more training and knowledge the I.T. professional has the more employable he
or she will be.
 Better income
It is well known fact that information technology professionals are paid well,
compared to other professionals. An I.T. professional with the right mix of
certifications & experience can find a permanent position in either the public or
private sector. Recently many companies have been extensively hiring experts
in cloud computing, cyber security and network security to help enhance their
current systems.
Bachelor of Computer Application
BCA is a part of information technology. In this age of computers and everything
being digitalized, knowledge about machines is very important. It helps the person
have a distinct advantage over the others who do not have a degree in computer
applications. The domain is growing a rapid pace. In the 1990’s with the advent of
globalization computers grew in prominence and slowly started to replace the paper
and files in offices. It brought down the cost to quite an exist.
BCA is a three year undergraduate degree course. Students will be taught subjects
which are related to the technological applications that are requires in today’s practical
work field.

1. Skills to be learnt –
Students who study for a bachelor of computer application (BCA) will get skills
and information not only about computer and information technology but also in
communication, organization and management. One also get to learn
programming languages such as C, C++, JAVA, JavaScript, HTML&CSS, SQL,
Foxpro, Oracle, Visual Basics, Asp etc.
2. Career opportunities –
BCA given a number of opportunities to individuals to go ahead and shine in
their lives. The opportunities available for people doing BCA are galore. A few of
them like software programmer, system and network administrator, web
designer, faculty for computer science / communication technology etc. the
range of chances in information technology are immense.
According to our MDS University we have learnt many theory & practical
subjects –
 First Year
o Management and accounting
o Computer fundamental
o PC software
o Fundamentals of C Programming
o Data structure and algorithm
o Multimedia Basic
 Second year
o Communication skills
o Database management system
o Client server technology
o Java Programming
o C++ Programming
o Computer Graphics
 Third year
o Visual Basic Programming
o Relational database management system (ORACLE / SQL)
o E – Commerce
o Computer Network and Mobile Computing
o Internet tools & website development (JavaScript, ASP)
o Management Information System

Introduction to Project
“Restaurant Billing System” in “Visual Basic Programming Language” which
includes many features like:
 Graphical and User friendly interface.
 Less time consuming.
 No paper work.
 Efficient working.
 Easy updation of database.
 Login through unique id and password by admin i.e. security from an
unauthorized people.
Why it is made –
 The main purpose of this project is replace the manually work.
 Provide a friendly environment to maintain the details of customer and
employee.
 This project reduce the paper work.
 It reduce complexity.
 Security from unauthorized user.
 For easy billing of restaurant.
 Give accurate result.
Visual Basic –
Visual Basic 6.0 Language Visual basic (VB) is a 3rd generation event-driven
programming language developed by Microsoft for their operating system
windows. Visual basic is a widely understood high level programming
language, written using simple English. Like – words & syntax.
It is an interpreted language. Code can be run immediately after being written.
Having an interpreter makes its simpler to use, as there is no need for the
computer to compile the code, possibly finding errors to fix, before the
compiled version can be run. Once the code is working, it can be compiled into
an .exe file so that it will run on all modern windows computers, whether VB is
installed or not.
The language allows a beginning programmer to produce professional –
looking windows applications, as its include drawing tools to create normal
windows and structures which allow programs to be adapted for use with the
internet. VB will not run on operating systems other than windows.

Visual Basic has its origin in basic which was developed round about the year
1960, when high level languages were just being introduced to the computer
community. Microsoft has made it extremely powerful by gearing all its good
features to the windows environment.
Evaluation of Visual Basic –
VB 1.0 was introduced in 1991. The drag and drop design for creating the user
interface is derived from prototype from generator developed by Allan cooper
and his company called Tripod. Microsoft contracted with cooper and his
associates to develop Tripod into a programmable form system for windows
3.0, under the code name Ruby (no relation to the Ruby programming
language). Tripod did not include a programming language at all. Microsoft
decided to combine Ruby with the basic language to create Visual Basic.
Need of Visual Basic –
Visual Basic is easy to learn programming language. With Visual Basic you
can develop windows based applications and Games. Visual Basic is much
easier to learn than others language (like Visual C++), and yet it’s powerful
programming language.
Visual Basic suite more for desktop application developing than for Games
developing. You can create sophisticated games using Visual Basic, Visual
Basic will be probably powerful enough to suite all your application and games
programming needs.
Ms-Access Requirement –
 All the databases are created in the Microsoft access 2003.
 Microsoft access 2003 is the product of Microsoft.
 Microsoft access 2003, we create table which is the combination of rows and
columns.
 When we want to connect Microsoft access database in VB project so we save
the Microsoft access file with .mdb extension.
 We use Microsoft access 2003 with visual basic because visual basic supports
Microsoft access 2003.
 We can create multiple tables in single database.
 Visual basic does not support Microsoft access 2007 or later version.

Project & Their Facilities
The project that I made is “Restaurant Billing System Software”. This project is based
on billing of product.
This project provides all information that required in billing software. This software
describes the working of supermarket. This project contains lots of information will
entered properly.
This project basically works on two categories:-
 Front End
 Back End
 Front End - Basically this project work on visual basic.
 Back End - Basically this project works on MS Access 2003.
 At the Front hand basically this project works on Visual Basic. It is event
driven programming based project.
 At the Back hand basically this project works on Microsoft Access 2003.
My project contains ADODB connectivity with modules and also contains List View
so that all the information shown in List View.
MS Access contains the database and the tables which is help to fetch the records.
The file extension of MS Access 2003 is .MDB.
Why we made this project:-
1. To give knowledge of computer and reduce the work load of human being.
2. In my project there are so many facilities available which get our work easier.
3. It will increase the productivity and reduce the duplicity of data.
4. It will access easier to information related to the student.
5. It will maintain all records and time saving interface application.
6. It reduces the paper work.
7. It is accurate and reduce the complexity.
8. It saves the cost of employee.
9. It will give security to the staff.
10.To provide easy to user interface.

Objectives of Restaurant Management System –
1. Automation – The application automates each and every activity of the
manual system and increases its throughput. Thus the response time of the
system is very less and it works very fast.
2. Accuracy – The application provides the user a quick response with very
accurate information regarding the user etc. any details or system in an accurate
manner, as when required.
3. User Friendly – The application “Restaurant Billing System” has a very
user friendly interface. Thus the users will full very easy to work on it. The
application provides accuracy along with a pleasant interface. Make the present
manual system more interactive, speedy and user friendly.
4. Availability – The all Restaurant detail store permanently in the database
admin can see the data in the availability of any information, whatever needed.
5. Maintain Cost – Reduce the cost of maintenance. It is standalone
application so no required of cost for maintain it.
DIFFERENT LEVELS OF DFD (Dataflow Diagram) –
0 LEVEL DFD (Dataflow Diagram)
1 LEVEL DFD (Dataflow Diagram)
Restaurent
Billing
System
ADMIN
EMPLOYEE
Restaurent
Billing
System
ADMIN
EMPLOYEE Database
Request Request
Response Response

CONFIGURATION MODULES –
EMPLOYEE
ADMIN
ADD
New
ADMIN
ADD
NEW
EMPLOYEE
EMPLOYEE
ALL
FEATURES
ADD
ORDER
MODIFY
ORDER
GENERATE
BILL

In this project we create following tables –
1. Admin Details
2. Employee Details
3. Best Employee Details
4. Categories Details
5. Customer Details
6. Menu Details
7. Permanent Details
8. Temporary Details
9. Today Best Details
Admin Details:-
Fields Data
Type
Default Key Extra
ID Text Not Null - Auto
generated
mem_name Text Not Null - -
mem_pass Text Not Null - -
auto_num Number Not Null - -
product_sell Number Not Null - -
Employee Details:-
Fields Data
Type
Default Key Extra
ID Text Not Null - Auto
generated
mem_name Text Not Null - -
mem_pass Text Not Null - -

Best Employee Details:-
Categories Details:-
auto_num Number Not Null - Auto
generated
product_sell Number Not Null - -
Fields Data Type Default Key Extra
Emp_id Text Not Null - Auto
increment
Emp_name Text Not Null - -
January Number Not Null - -
Fabrary Number Not Null - -
March Number Not Null - -
April Number Not Null - -
May Number Not Null - -
June Number Not Null - -
July Number Not Null - -
Auguest Number Not Null - -
September Number Not Null - -
October Number Not Null - -
November Number Not Null - -
December Number Not Null - -
Total Number Not Null - -
Fields Data
Type
Default Key Extra
ID Number Not Null - Auto
generated
category Memo Not Null - -

Customer Details:-
Menu Details:-
Permanent Details:-
Cname Text Not Null - -
Address Text Not Null - -
Contact Number Not Null - -
Email Number Not Null - -
Pincode Number Not Null - -
auto no Number Not Null - Auto
generated
Mccardno Text Not Null - -
Mccardpass Text Not Null - Auto
generated
Memamt Number Not Null - -
Id Number Not Null - Auto
generated
Category Text Not Null - -
Pname Text Not Null - -
Samt Text Not Null - -
Mamt Text Not Null - -
Lamt Text Not Null - -
cusname Text Not Null - -
cusphno Text Not Null - -
cusdob Date/Time Not Null - -
bill_no Text Not Null - Auto

Temporary Details:-
Today Best Details:-
generated
bdate Date/Time Not Null - -
btime Date/Time Not Null - Auto
generated
pname Text Not Null - -
price number Not Null - -
quantity number Not Null - -
vat number Not Null - -
amt number Not Null - -
dis number Not Null - -
ser_tax number Not Null - -
total number Not Null - -
employeee Text Not Null - -
pname Text Not Null - -
price Number Not Null - -
quantity Number Not Null - -
vat Number Not Null - -
amt Number Not Null - -
Tdate Date/Time Not Null - -
Emp1 name Number Not Null - Auto generated
Emp2 name Number Not Null - Auto generated
….. name Number Not Null - Auto generated
Empn name Number Not Null - Auto generated

SOFTWARE REQUIREMENTS:-
1. Visual studio 6 which contain visual basic 6.0
2. Microsoft access 2003 which extension should be .MDB
3. GUI(Graphical User Interface) operating system (Window7)
HARDWARE REQUIREMENTS:-
1. Central Processing Unit (RAM, ROM, HARD DISK).
2. Desktop (LCD, LED, CRT, Any visual display).
3. Mouse and Keyboard.
4. Internal Memory 500MB.
5. Minimum 2GB RAM.
MY PROJECT
Login_Form:-

Private Sub Command1_Click()
Frame3.Visible = True
Text1.SetFocus
End Sub
Text3.SetFocus
End Sub
Call terminate
End Sub
Call terminate
End Sub

Call connect
find = 0
With tmidpass
Do Until .EOF
If ((.Fields(0).Value = Text1.Text Or .Fields(1).Value = Text1.Text) And
(.Fields(2).Value = Text2.Text)) Then
adname = .Fields(1).Value
Order_Now.Label15.Caption = "Current Admin :"
Order_Now.Label16.Caption = adname
find = 1
ElseIf ((.Fields(0).Value = Text1.Text Or .Fields(1).Value = Text1.Text) And
(.Fields(2).Value <> Text2.Text)) Then
find = 2
ElseIf ((.Fields(0).Value <> Text1.Text Or .Fields(1).Value <> Text1.Text)
And (.Fields(2).Value = Text2.Text)) Then
find = 3
End If
.MoveNext
Loop
If find = 1 Then
Main_Interface.Show
Main_Interface.Command3.Enabled = True
Main_Interface.Command3.Visible = True

Main_Interface.Command1.Top = 1320
Main_Interface.Command1.Left = 840
Unload Me
ElseIf find = 2 Then
MsgBox ("Wrong Password::Try again"), vbCritical, ("Mcdonald's")
Text2.Text = ""
Text2.SetFocus
ElseIf find = 3 Then
MsgBox ("Invalid ID or Name"), vbCritical, ("Mcdonald's")
Text1.Text = ""
Text1.SetFocus
Else

MsgBox ("Fill the Details Correctly"), vbCritical, ("Mcdonald's")
Text2.Text = ""
Text1.Text = ""
Text1.SetFocus
End If
End With
End Sub
Frame3.Visible = False
End Sub
End Sub
Call connect
find = 0
With eidpass
Do Until .EOF
find = 1
empname = .Fields(1).Value
Order_Now.Label15.Caption = "Current Emp. :"
Order_Now.Label16.Caption = empname
Main_Interface.Command4.Enabled = False

Else
(.Fields(2).Value <> Text4.Text)) Then
find = 2
Else
If ((.Fields(0).Value <> Text3.Text Or .Fields(1).Value <> Text3.Text) And
find = 3
End If
End If
End If
.MoveNext
Loop
If find = 1 Then
Unload Me
Main_Interface.Command4.Visible = False
Main_Interface.Command13.Visible = False

Main_Interface.Show
Else
If find = 2 Then
MsgBox ("Wrong Password::Try Again"), vbCritical, ("Mcdonald's")
Text4.Text = ""
Text4.SetFocus
Else
If find = 3 Then
MsgBox ("Invalid ID or Name::Try Again"), vbCritical, ("Mcdonald's")
Text3.Text = ""
Text3.SetFocus
Else
Text3.Text = ""
Text4.Text = ""
Text3.SetFocus
End If
End If
End If

End With
End Sub
Call terminate
End Sub
Private Sub Form_Load()
End Sub
Private Sub Picture1_Click()
Timer1.Enabled = True
Command1.SetFocus
End Sub
Private Sub Picture2_Click()
Command3.SetFocus
End Sub
Private Sub Text1_KeyUp(KeyCode As Integer, Shift As Integer)
If Text1.Text = "" Then
Else

If ((KeyCode >= 48 And KeyCode <= 57) Or (KeyCode >= 96 And KeyCode <=
105) Or (KeyCode >= 60 And KeyCode <= 90) Or KeyCode = 13 Or KeyCode =
35 Or _
KeyCode = 36 Or KeyCode = 32 Or KeyCode = 8 Or KeyCode = 16 Or KeyCode
= 37 Or KeyCode = 38 Or KeyCode = 39 Or KeyCode = 40) Then
Else
MsgBox ("Not Allowed")
Text1.Text = ""
End If
End If
End Sub
If (Text2.Text = "") Then
Else
105) Or KeyCode = 13 Or KeyCode = 35 Or _
Else
Text2.Text = ""
End If
End If
End Sub
Else

35 Or _
Else
Text3.Text = ""
End If
End If
End Sub
Else
Else
Text4.Text = ""
End If
End If
End Sub
Private Sub Timer1_Timer()
If Timer1.Enabled = True Then
Picture1.Top = Picture1.Top - 60

Timer2.Enabled = False
Picture2.Top = 80
End If
End Sub
If Timer2.Enabled = True Then
Picture2.Top = Picture2.Top - 60
Timer1.Enabled = False
Picture1.Top = 80
End If
End Sub
Main_Interface:-

Admin Main Interface:-
Employee Main Interface:-
Dim a As Integer
Order_Now.Show
Main_Interface.Hide
End Sub

Frame2.Enabled = True
Command1.SetFocus
End Sub
Login_Form.Show
End Sub
Generate_Bill.Show
End Sub
Sales.Show
End Sub
Main_Interface.Enabled = False
Customer_info.Show
Customer_info.Top = 2500
Customer_info.Left = 5820
End Sub
Frame2.Enabled = False

Command9.SetFocus
End Sub
Join_us.Show
Main_Interface.Hide
End Sub
Add_Emp.Show
Main_Interface.Frame1.Enabled = False
End Sub
Delete_Admin.Show
End Sub
Delete_Employee.Show
End Sub

Add_Admin.Show
End Sub
Main_Interface.BackColor = RGB(241, 6, 11)
End Sub
If a = 0 Then
Label2.Caption = " "
Label2.Caption = "I"
a = 1
ElseIf a = 1 Then
Label2.Caption = "I m"
a = 2
ElseIf a = 2 Then
Label2.Caption = "I m l"
a = 3
ElseIf a = 3 Then

Label2.Caption = "I m lo"
a = 4
ElseIf a = 4 Then
Label2.Caption = "I m lov"
a = 5
ElseIf a = 5 Then
Label2.Caption = "I m lovi"
a = 6
ElseIf a = 6 Then
Label2.Caption = "I m lovin"
a = 7
ElseIf a = 7 Then
Label2.Caption = "I m lovin i"
a = 8
ElseIf a = 8 Then
Label2.Caption = "I m lovin it"
a = 9
ElseIf a = 9 Then
a = 0
End If
End Sub

Update Staff:-
Add Admin:-
Text2.Enabled = True

Command3.Enabled = True
Call connect
With tmidpass
If (Label20.Caption = "" And Text2.Text = "" And Label4.Caption = "") Then
m = 0
If .RecordCount = 0 Then
m = 1
Else
.MoveFirst
Do Until .EOF
If .Fields(3).Value > m Then
m = .Fields(3).Value
End If
.MoveNext
Loop
m = m + 1
End If
tmid = "TMid" & Format(m, "0000")
Label20.Caption = tmid
Else
MsgBox ("Please Clear All Boxes")
End If
End With
End Sub
Unload Me

Main_Interface.Show
Main_Interface.Enabled = True
Main_Interface.Frame1.Visible = True
Main_Interface.Frame1.Enabled = True
End Sub
Label20.Caption = ""
Text2.Text = ""
Text1.Text = ""
Label4.Caption = ""
End Sub
MsgBox ("Enter the name Plzzzz..")
End If
Call connect
With tmidpass
If (Label20.Caption <> "" And Text2.Text <> "" And Label4.Caption = "") Then
apass = 1111
m = 0
m = 1
apass = 1111
Else
.MoveFirst
Do Until .EOF

apass = apass + 11
End If
.MoveNext
Loop
m = m + 1
End If
.AddNew
.Fields(0) = Label20.Caption
.Fields(1) = StrConv(Text2.Text, vbProperCase)
.Fields(2) = apass
.Fields(3) = m
.Fields(4) = 0
.Update
Label4.Caption = apass
End If
End With
End Sub
If (Text1.Text <> "") Then
length = Len(Text1.Text)
i = 0
gap = 1
Do Until i = length
c = (Asc(Right(Text1.Text, (i + 1))))

If ((c >= 97 And c <= 122) Or (c >= 65 And c <= 90) Or (c = 32)) Then
If (gap = 1 Or gap = 2) Then
check = 1
Else
check = 0
End If
Else
check = 0
Exit Do
End If
If (c = 32) Then
gap = Val(gap) + 1
End If
i = i + 1
Loop
If (check = 0) Then
Command4.Enabled = False
Else
End If
Else
End If
End Sub
Private Sub Text1_LostFocus()
i = 0

gap = 1
Do Until i = length
check = 1
Else
check = 0
End If
Else
check = 0
Exit Do
End If
If (c = 32) Then
gap = Val(gap) + 1
End If
i = i + 1
Loop
If (check = 0) Then
MsgBox ("Please Enter Only Characters")
Text1.SetFocus
Else
Else
End If
End If

Else
Else
End If
End If
End Sub
Private Sub Text1_GotFocus()
End Sub
End Sub
i = 0
gap = 1
Do Until i = length
check = 1
Else
check = 0
End If

Else
check = 0
Exit Do
End If
If (c = 32) Then
gap = Val(gap) + 1
End If
i = i + 1
Loop
If (check = 0) Then
Else
End If
Else
End If
End Sub
i = 0
gap = 1
Do Until i = length
check = 1

Else
check = 0
End If
Else
check = 0
Exit Do
End If
If (c = 32) Then
gap = Val(gap) + 1
End If
i = i + 1
Loop
If (check = 0) Then
Text2.SetFocus
Else
Else
End If
End If
Else
End If
End Sub

Add Employee:-
Call connect
With eidpass
If (Label20.Caption = "" And Text2.Text = "" And Label4.Caption = "") Then
Text2.Text = ""
Label4.Caption = ""
m = 0
m = 1
Else

.MoveFirst
Do Until .EOF
End If
.MoveNext
Loop
m = m + 1
End If
emid = "EMid" & Format(m, "0000")
Label20.Caption = emid
End If
End With
End Sub
Unload Me
Main_Interface.Show
End Sub
Text2.Text = ""
Text1.Text = ""
Label4.Caption = ""

End Sub
MsgBox ("Enter the name Plzzzz..")
End If
Call connect
With eidpass
If (Label20.Caption <> "" And Text2.Text <> "" And Label4.Caption = "") Then
apass = 1111
m = 0
m = 1
apass = 1111
Else
.MoveFirst
Do Until .EOF
apass = apass + 11
End If
.MoveNext
Loop
m = m + 1
End If
.AddNew

.Fields(2) = apass
.Fields(3) = m
.Fields(4) = 0
.Update
Label4.Caption = apass
With tbemp
.Close
.Open "alter table Today_best add " & Text2.Text & " " & "number", con,
adOpenDynamic, adLockOptimistic
End With
With bmemp
.AddNew
.Fields(2) = 0
.Fields(3) = 0
.Fields(4) = 0
.Fields(5) = 0
.Fields(6) = 0
.Fields(7) = 0
.Fields(8) = 0
.Fields(9) = 0
.Fields(10) = 0
.Fields(11) = 0
.Fields(12) = 0
.Fields(13) = 0
.Update

End With
End If
End With
End Sub
i = 0
gap = 1
Do Until i = length
check = 1
Else
check = 0
End If
Else
check = 0
Exit Do
End If
If (c = 32) Then
gap = Val(gap) + 1
End If
i = i + 1
Loop
If (check = 0) Then

Else
End If
Else
End If
End Sub
i = 0
gap = 1
Do Until i = length
check = 1
Else
check = 0
End If
Else
check = 0
Exit Do
End If
If (c = 32) Then
gap = Val(gap) + 1
End If
i = i + 1

Loop
If (check = 0) Then
Text1.SetFocus
Else
Else
End If
End If
Else
End If
End Sub
End Sub
End Sub
i = 0
gap = 1
Do Until i = length

check = 1
Else
check = 0
End If
Else
check = 0
Exit Do
End If
If (c = 32) Then
gap = Val(gap) + 1
End If
i = i + 1
Loop
If (check = 0) Then
Else
End If
Else
End If
End Sub

i = 0
gap = 1
Do Until i = length
check = 1
Else
check = 0
End If
Else
check = 0
Exit Do
End If
If (c = 32) Then
gap = Val(gap) + 1
End If
i = i + 1
Loop
If (check = 0) Then
Text2.SetFocus
Else
Else
End If

End If
Else
End If
End Sub
Blank:-
Blank.BackColor = RGB(246, 6, 9)
Blank.Top = Blank.Height / 2.2 - Blank.Height / 3
Blank.Left = Blank.Width / 3 - Blank.Width / 3
End Sub
Burger:-
Call Burgerdesc
Image5.Visible = False

Text1.SetFocus
Label1.Caption = Command1.Caption
End Sub
Call Burgerdesc
Text1.SetFocus
End Sub
Call Burgerdesc
Text1.SetFocus
End Sub
Call Burgerdesc
Text1.SetFocus
End Sub

If Label7.Caption = "" And Text1.Text = "" Then
MsgBox ("Select The Order"), vbCritical
ElseIf Label7.Caption = "" Then
MsgBox ("Select the Size"), vbCritical
ElseIf Text1.Text = "" Then
MsgBox ("Enter the Quantity"), vbCritical
Else
lab = Burger.Label1.Caption
pri = Val(Burger.Label7.Caption)
quan = Val(Burger.Text1.Text)
Set l = Order_Now.ListView1.ListItems.Add(, , lab)
l.SubItems(1) = pri
l.SubItems(2) = quan
vat = (pri * quan * 20) / 100
l.SubItems(3) = vat
cal = pri * quan + vat
l.SubItems(4) = cal
total = 0
Call Burgerdesc
For i = 1 To Order_Now.ListView1.ListItems.Count
total = total + Val(Order_Now.ListView1.ListItems.Item(i).SubItems(4))
Next
Order_Now.Label4.Caption = total
End If
End Sub

Call Burgerdesc
Text1.SetFocus
End Sub
Call Burgerdesc
Text1.SetFocus
End Sub
Call Burgerdesc
Text1.SetFocus
End Sub
Call Burgerdesc
Text1.SetFocus
End Sub

Order_Now.Show: Order_Now.Enabled = True
End Sub
Call check1
End Sub
Private Sub Form_Activate()
Order_Now.Enabled = False
End Sub
Private Sub Form_Deactivate()
Order_Now.Enabled = True
End Sub
Burger.BackColor = RGB(246, 6, 9)
Burger.Top = Burger.Height / 2.2 - Burger.Height / 3
Burger.Left = Burger.Width / 3 - Burger.Width / 3
End Sub
Private Sub Label8_Click()
Order_Now.Show
End Sub

Private Sub Option1_Click()
Call connect
With all
Do Until .EOF
If (Label1.Caption = .Fields(2).Value) Then
price = .Fields(3).Value
Label7.Caption = price
End If
.MoveNext
Loop
End With
End Sub
Call connect
With all
Do Until .EOF
End If
.MoveNext
Loop
End With
End Sub
Call connect
With all

Do Until .EOF
End If
.MoveNext
Loop
End With
End Sub
Else
Else
Text1.Text = ""
End If
End If
End Sub

Chicken:-
Call Chickendesc
Text1.SetFocus
End Sub
Call Chickendesc
Text1.SetFocus
End Sub

Call Chickendesc
Text1.SetFocus
End Sub
Call Chickendesc
Text1.SetFocus
End Sub
Else
lab = Chicken.Label1.Caption
pri = Val(Chicken.Label7.Caption)
quan = Val(Chicken.Text1.Text)
l.SubItems(1) = pri

vat = (pri * quan * 20) / 100
l.SubItems(3) = vat
l.SubItems(4) = cal
Call Chickendesc
total = 0
Next
End If
End Sub
Call Chickendesc
Text1.SetFocus
End Sub
Call Chickendesc
Text1.SetFocus
End Sub

Call Chickendesc
Text1.SetFocus
End Sub
Call Chickendesc
Text1.SetFocus
End Sub
Chicken.BackColor = RGB(240, 6, 9)
Chicken.Top = Chicken.Height / 2.2 - Chicken.Height / 3
Chicken.Left = Chicken.Width / 3 - Chicken.Width / 3
End Sub
End Sub
End Sub

End Sub
Call check1
End Sub
Private Sub Form_LostFocus()
Unload Me
End Sub
Order_Now.Show
End Sub
Call connect
With all
Do Until .EOF
End If
.MoveNext
Loop
End With

End Sub
Call connect
With all
Do Until .EOF
End If
.MoveNext
Loop
End With
End Sub
Call connect
With all
Do Until .EOF
End If
.MoveNext
Loop
End With
End Sub

Else
Else
Text1.Text = ""
End If
End If
End Sub
Chocolate:-

Call Chocolatedesc
Text1.SetFocus
End Sub
Call Chocolatedesc
Text1.SetFocus
End Sub
Call Chocolatedesc
Text1.SetFocus
End Sub
Call Chocolatedesc
Text1.SetFocus

End Sub
Else
lab = Chocolate.Label1.Caption
pri = Val(Chocolate.Label7.Caption)
quan = Val(Chocolate.Text1.Text)
l.SubItems(1) = pri
vat = (pri * quan * 20) / 100
l.SubItems(3) = vat
l.SubItems(4) = cal
Call Chocolatedesc
total = 0
Next
End If
End Sub

Call Chocolatedesc
Text1.SetFocus
End Sub
Call Chocolatedesc
Text1.SetFocus
End Sub
Call Chocolatedesc
Text1.SetFocus
End Sub
Call Chocolatedesc
Text1.SetFocus
End Sub

Chocolate.BackColor = RGB(240, 6, 9)
Chocolate.Top = Chocolate.Height / 2.2 - Chocolate.Height / 3
Chocolate.Left = Chocolate.Width / 3 - Chocolate.Width / 3
End Sub
End Sub
End Sub
End Sub
Call check1
End Sub
Private Sub Form_LostFocus()
Unload Me
End Sub
Order_Now.Show

End Sub
Call connect
With all
Do Until .EOF
End If
.MoveNext
Loop
End With
End Sub
Call connect
With all
Do Until .EOF
End If
.MoveNext
Loop
End With
End Sub

Call connect
With all
Do Until .EOF
End If
.MoveNext
Loop
End With
End Sub
Else
Else
Text1.Text = ""
End If
End If
End Sub

Coffee:-
Call Coffeedesc
Text1.SetFocus
End Sub
Call Coffeedesc
Text1.SetFocus
End Sub

Call Coffeedesc
Text1.SetFocus
End Sub
Call Coffeedesc
Text1.SetFocus
End Sub
Else
lab = Coffee.Label1.Caption
pri = Val(Coffee.Label7.Caption)
quan = Val(Coffee.Text1.Text)
l.SubItems(1) = pri

vat = (pri * quan * 20) / 100
l.SubItems(3) = vat
l.SubItems(4) = cal
Call Coffeedesc
total = 0
Next
End If
End Sub
Call Coffeedesc
Text1.SetFocus
End Sub
Call Coffeedesc
Text1.SetFocus
End Sub

Call Coffeedesc
Text1.SetFocus
End Sub
Call Coffeedesc
Text1.SetFocus
End Sub
Coffee.BackColor = RGB(240, 6, 9)
Coffee.Top = Coffee.Height / 2.2 - Coffee.Height / 3
Coffee.Left = Coffee.Width / 3 - Coffee.Width / 3
End Sub
End Sub
End Sub

End Sub
Call check1
End Sub
Order_Now.Show
End Sub
Call connect
With all
Do Until .EOF
End If
.MoveNext
Loop
End With
End Sub
Call connect
With all
Do Until .EOF

End If
.MoveNext
Loop
End With
End Sub
Call connect
With all
Do Until .EOF
End If
.MoveNext
Loop
End With
End Sub
Else

Else
Text1.Text = ""
End If
End If
End Sub
Combo:-
Call Combodesc
End Sub

Call Combodesc
End Sub
Call Combodesc
End Sub
Call Combodesc
End Sub
Else

lab = Combo.Label1.Caption
pri = Val(Combo.Label7.Caption)
quan = Val(Combo.Text1.Text)
l.SubItems(1) = pri
vat = (pri * quan * 20) / 100
l.SubItems(3) = vat
l.SubItems(4) = cal
Call Combodesc
Next
End If
End Sub
Call Combodesc
End Sub
Call Combodesc

End Sub
Call Combodesc
End Sub
Call Combodesc
End Sub
Combo.BackColor = RGB(240, 6, 9)
Combo.Top = Combo.Height / 2.2 - Combo.Height / 3
Combo.Left = Combo.Width / 3 - Combo.Width / 3
End Sub
End Sub
End Sub

End Sub
Call check1
End Sub
Order_Now.Show
End Sub
Call connect
With all
Do Until .EOF
End If
.MoveNext
Loop
End With
End Sub
Call connect
With all
Do Until .EOF

End If
.MoveNext
Loop
End With
End Sub
Call connect
With all
Do Until .EOF
End If
.MoveNext
Loop
End With
End Sub
Else

Else
Text1.Text = ""
End If
End If
End Sub
Customer_info:-

Unload Me
End Sub
Unload Me
Main_Interface.Show
End Sub
Call connect
If (Text1.Text <> "" And Text2.Text <> "") Then
With ju
check = 0
Do Until .EOF
If .Fields(7).Value = Text1.Text And .Fields(6).Value = Text2.Text Then

check = 1
Exit Do
Else
check = 0
End If
.MoveNext
Loop
If check = 1 Then
Command1.SetFocus
Label2.Caption = .Fields(0)
Else
MsgBox ("Wrong Id or Password::Try again"), vbCritical, ("Mcdonald's")
Text1.Text = ""
Text2.Text = ""
Text2.SetFocus
End If
End With
Else
Text2.SetFocus
End If

End Sub
Else
= 39 Or KeyCode = 40) Then
Else
Text1.Text = ""
End If
End If
End Sub
Else
35 Or _
Else
Text2.Text = ""
End If
End If

End Sub
Delete_Admin:-
Private Sub Combo1_Click()
Combo1.Refresh
End Sub
Text2.Text = ""
Label4.Caption = ""
Combo1.Text = "Select plz"
End Sub

Unload Me
Main_Interface.Show
End Sub
Text2.Text = ""
Label4.Caption = ""
End Sub
check = MsgBox("Are You Sure to want to DELETE the Entry", vbYesNoCancel,
"Choose the Correct...")
If (check = 6) Then
With tmidpass
.MoveFirst
check = 0
i = 0
If (Combo1.Text <> "" And Text2.Text <> "" And Label4.Caption <> "") Then
Do Until .EOF
If (.Fields(0).Value = Combo1.Text And .Fields(2).Value = Text2.Text And
.Fields(1) = Label4.Caption) Then
check = 1
cout = i

i = i + 1
Exit Do
Else
check = 0
i = i + 1
End If
.MoveNext
Loop
If (check = 1) Then
.Delete adAffectCurrent
Combo1.RemoveItem (cout)
Text2.Text = ""
Label4.Caption = ""
Else
End If
End If
End With
Else
If (check = 7) Then
Else
End If
End If
End Sub

Call connect
With tmidpass
Do Until .EOF
Data = .Fields(0).Value
Combo1.AddItem (Data)
.MoveNext
Loop
End With
End Sub
Call connect
With tmidpass
If (Combo1.Text <> "" And Text2.Text <> "") Then
check = 0
Do Until .EOF
If (.Fields(0).Value = Combo1.Text And .Fields(2).Value = Text2.Text) Then
check = 1
Exit Do
Else
check = 0
End If
.MoveNext
Loop

If (check = 1) Then
Label4.Caption = .Fields(1).Value
Else
Label4.Caption = ""
MsgBox ("Please Enter Correct Id & Pass.")
Combo1.SetFocus
End If
End If
End With
Else
End If
End Sub

Delete_Employee:-
Private Sub Combo1_Click()
Combo1.Refresh
End Sub
Text2.Text = ""
Label4.Caption = ""
End Sub
Unload Me
Main_Interface.Show

End Sub
Text2.Text = ""
Label4.Caption = ""
End Sub
Call connect
check = MsgBox("Are You Sure to want to DELETE the Entry", vbYesNoCancel,
"Choose the Correct...")
If (check = 6) Then
With eidpass
.MoveFirst
check = 0
i = 0
Do Until .EOF
If (.Fields(0).Value = Combo1.Text And .Fields(2).Value = Text2.Text And
.Fields(1) = Label4.Caption) Then
check = 1
cout = i
i = i + 1

Exit Do
Else
check = 0
i = i + 1
End If
.MoveNext
Loop
If (check = 1) Then
With bmemp
.MoveFirst
Do Until .EOF
Exit Do
End If
.MoveNext
Loop
End With
With tbemp
.Close
.Open "alter table Today_Best drop " & eidpass.Fields(1).Value & " ", con,
adOpenDynamic, adLockOptimistic
End With
Combo1.RemoveItem (cout)
Text2.Text = ""
Label4.Caption = ""

Else
End If
End If
End With
Else
If (check = 7) Then
Else
End If
End If
End Sub
Call connect
With eidpass
Do Until .EOF
Data = .Fields(0).Value
Combo1.AddItem (Data)
.MoveNext
Loop
End With
End Sub

Call connect
With eidpass
If (Combo1.Text <> "" And Text2.Text <> "") Then
check = 0
Do Until .EOF
If (.Fields(0).Value = Combo1.Text And .Fields(2).Value = Text2.Text) Then
check = 1
Exit Do
Else
check = 0
End If
.MoveNext
Loop
If (check = 1) Then
Else
Label4.Caption = ""
MsgBox ("Please Enter Correct Id & Pass.")
Combo1.SetFocus
End If
End If
End With

Else
End If
End Sub
Fries:-
Call Friesdesc
End Sub
Call Friesdesc

End Sub
Call Friesdesc
End Sub
Call Friesdesc
End Sub
Else
lab = Fries.Label1.Caption
pri = Val(Fries.Label7.Caption)

quan = Val(Fries.Text1.Text)
l.SubItems(1) = pri
vat = (pri * quan * 20) / 100
l.SubItems(3) = vat
l.SubItems(4) = cal
Call Friesdesc
total = 0
Next
End If
End Sub
Call Friesdesc
End Sub
Call Friesdesc

End Sub
Call Friesdesc
End Sub
Call Friesdesc
End Sub
Fries.BackColor = RGB(240, 6, 9)
Fries.Top = Fries.Height / 2.2 - Fries.Height / 3
Fries.Left = Fries.Width / 3 - Fries.Width / 3
End Sub
End Sub
End Sub

Else
Text1.Text = ""
End If
End If
End Sub
Icecream:-
Call Icecreamdesc
Text1.SetFocus
End Sub
Call Icecreamdesc

Text1.SetFocus
End Sub
Call Icecreamdesc
Text1.SetFocus
End Sub
Call Icecreamdesc
Text1.SetFocus
End Sub

Else
lab = Icecream.Label1.Caption
pri = Val(Icecream.Label7.Caption)
quan = Val(Icecream.Text1.Text)
l.SubItems(1) = pri
vat = (pri * quan * 20) / 100
l.SubItems(3) = vat
l.SubItems(4) = cal
Call Icecreamdesc
total = 0
Next
End If
End Sub
Call Icecreamdesc
Text1.SetFocus
End Sub

Call Icecreamdesc
Text1.SetFocus
End Sub
Call Icecreamdesc
Text1.SetFocus
End Sub
Call Icecreamdesc
Text1.SetFocus
End Sub
Icecream.BackColor = RGB(240, 6, 9)
Icecream.Top = Icecream.Height / 2.2 - Icecream.Height / 3
Icecream.Left = Icecream.Width / 3 - Icecream.Width / 3
End Sub
End Sub

End Sub
End Sub
Call check1
End Sub
Order_Now.Show
End Sub
Call connect
With all
Do Until .EOF
End If
.MoveNext
Loop
End With
End Sub

Call connect
With all
Do Until .EOF
End If
.MoveNext
Loop
End With
End Sub
Call connect
With all
Do Until .EOF
End If
.MoveNext
Loop
End With
End Sub

Else
Else
Text1.Text = ""
End If
End If
End Sub
Join_us:-

Already in Our List Update Pofile:-

Dim cpass, cmcno
Dim apass, amcno
Dim check
Dim num, k
Dim a, m As Integer
Call connect
With ju
If (Text1.Text = "" Or Text2.Text = "" Or Text3.Text = "" Or Text4.Text = "" Or
Text5.Text = "") Then
MsgBox "please fill all entries"
Else
check = 0
.MoveFirst

Do Until .EOF
If Text3.Text = (.Fields(2).Value) Then
check = 1
Exit Do
Else
check = 0
End If
.MoveNext
Loop
If (check = 1) Then
mgbox = MsgBox("Number is Already In Our List" & vbNewLine & "You
Want to overwright the data ???", vbYesNoCancel)
If (mgbox = 6) Then
.Update
Text1.Text = ""
Text2.Text = ""
Text3.Text = ""
Text4.Text = ""
Text5.Text = ""
Text6.Text = ""

Else
End If
Else
apass = 1001
m = 0
m = 1
apass = 1001
Else
.MoveFirst
Do Until ju.EOF
apass = apass + 11
End If
.MoveNext
Loop
m = m + 1
End If
.AddNew
amcno = "MCcn" & Format(m, "0000")

.Fields(5) = m
.Fields(6) = amcno
.Fields(7) = apass
.Update
Text1.Text = ""
Text2.Text = ""
Text3.Text = ""
Text4.Text = ""
Text5.Text = ""
Text6.Text = ""
Join_us.Label15.Caption = amcno
Join_us.Label16.Caption = apass
End If
End If
End With
End Sub
Main_Interface.Show
Unload Me
End Sub
If (Text7.Text = "" Or Text8.Text = "") Then

MsgBox ("Please Fill Both Entries")
Else
Call connect
check = 0
With ju
Do Until .EOF
If ((.Fields(6).Value = Text7.Text) And (.Fields(7).Value = Text8.Text))
Then
check = 1
Exit Do
Else
check = 0
End If
.MoveNext
Loop
If (check = 1) Then
Text1.Text = .Fields(0)
Else
MsgBox ("Enter Correct ID And Password")
Text7.Text = ""

Text8.Text = ""
End If
End With
End If
End Sub
End Sub
End Sub
End Sub
End Sub
Else
If KeyCode = 16 Or KeyCode = 32 Or KeyCode = 37 Or KeyCode = 38 Or
= 8 Then

ElseIf (Not ((KeyCode >= 65 And KeyCode <= 90)) Or ((KeyCode >= 97 And
KeyCode <= 122))) Then
str1 = Left(Text1.Text, Len(Text1.Text) - 1)
Text1.Text = ""
Text1.SelText = Right(str1, Len(str1))
Else
End If
End If
End Sub
k = 0
Else
'MsgBox (KeyCode)
k = k + 1
If (k = 1) Then
If (KeyCode = 105 Or KeyCode = 104 Or KeyCode = 103) Then
Else
MsgBox ("Enter a Valid Number")
Text3.Text = ""
End If
End If
Else

Text3.Text = ""
End If
End If
End Sub
Else
Else
Text5.Text = ""
End If
End If
End Sub
ElseIf (Val(Text5.Text) < 5000) Then
MsgBox ("Membership Amount is NOT < 5000")
Text5.SetFocus
End If
End Sub

Else
105) Or KeyCode = 13 Or KeyCode = 8 Or KeyCode = 35 _
Or KeyCode = 36 Or KeyCode = 16 Or KeyCode = 37 Or KeyCode = 38 Or
KeyCode = 39 Or KeyCode = 40) Then
Else
Text6.Text = ""
End If
End If
End Sub
Else
35 Or _
Else
Text7.Text = ""
End If
End If
End Sub
Else

Else
Text8.Text = ""
End If
End If
End Sub
If a = 0 Then
Label8.Caption = "I"
a = 1
ElseIf a = 1 Then
Label8.Caption = "I m"
a = 2
ElseIf a = 2 Then
Label8.Caption = "I m l"
a = 3
ElseIf a = 3 Then
Label8.Caption = "I m lo"
a = 4
ElseIf a = 4 Then

Label8.Caption = "I m lov"
a = 5
ElseIf a = 5 Then
Label8.Caption = "I m lovi"
a = 6
ElseIf a = 6 Then
Label8.Caption = "I m lovin"
a = 7
ElseIf a = 7 Then
Label8.Caption = "I m lovin i"
a = 8
ElseIf a = 8 Then
Label8.Caption = "I m lovin it"
a = 9
ElseIf a = 9 Then
a = 0
End If
End Sub

Modify:-
Label30.Caption = Val(Text3.Text) * Val(Label1.Caption)
vat = Val(Label30.Caption) * 20 / 100
Order_Now.ListView1.ListItems.Item(i).Text = Label22.Caption
Order_Now.ListView1.ListItems.Item(i).SubItems(1) = Label1.Caption
Order_Now.ListView1.ListItems.Item(i).SubItems(2) = Text3.Text
Order_Now.ListView1.ListItems.Item(i).SubItems(3) = vat
Order_Now.ListView1.ListItems.Item(i).SubItems(4) = (Val(Label30.Caption) +
vat)
End Sub
Order_Now.Show

Unload Me
Unload Burger
Unload Chicken
Unload Coffee
Unload Combo
Unload Chocolate
Unload Fries
Unload Icecream
Unload Salad
Unload Shakes
End Sub
Label1.Caption = ""
Text3.Text = ""
Option1.Value = False
End Sub
End Sub
Order_Now.ListView1.ListItems.Remove (i)
i = i - 1
End Sub

i = Order_Now.ListView1.ListItems.Count
Label22.Caption = Order_Now.ListView1.ListItems.Item(i).Text
Text3.Text = (Order_Now.ListView1.ListItems.Item(i).SubItems(2))
Label1.Caption = (Order_Now.ListView1.ListItems.Item(i).SubItems(1))
total = (Order_Now.ListView1.ListItems.Item(i).SubItems(1)) *
(Order_Now.ListView1.ListItems.Item(i).SubItems(2))
Label30.Caption = total
price = (Val(Label30.Caption) / Val(Text3.Text))
Call connect
With all
Do Until .EOF
If (Label22.Caption = (.Fields(2).Value)) Then
If (price = Val(.Fields(3).Value)) Then
Option1.Value = True
Else
Else

End If
End If
End If
End If
.MoveNext
Loop
End With
End Sub
i = 1
Call connect
With all
Do Until .EOF

Else
Else
End If
End If
End If
End If
.MoveNext
Loop
End With
End Sub
End Sub

Modify.BackColor = RGB(240, 6, 9)
Modify.Top = Modify.Height / 2.2 - Modify.Height / 3
Modify.Left = Modify.Width / 3 - Modify.Width / 3
i = 1
Call connect
With all
Do Until .EOF
Else

Else
End If
End If
End If
End If
.MoveNext
Loop
End With
End Sub
If (i = Order_Now.ListView1.ListItems.Count) Then
i = 0
End If
i = i + 1

Call connect
With all
Do Until .EOF
Else
Else
End If
End If
End If
End If
.MoveNext
Loop

End With
End Sub
If (i = 1) Then
i = (Order_Now.ListView1.ListItems.Count + 1)
End If
i = i - 1
Call connect
With all
Do Until .EOF
Else

Else
End If
End If
End If
End If
.MoveNext
Loop
End With
End Sub
Call connect
With all
Do Until .EOF
End If
.MoveNext
Loop
total = (Val(Text3.Text) * Val(Label1.Caption))

End With
End Sub
Call connect
With all
Do Until .EOF
End If
.MoveNext
Loop
End With
End Sub
Call connect
With all
Do Until .EOF

End If
.MoveNext
Loop
End With
End Sub
Order_Now:-
Dim check, k
If ListView1.ListItems.Count = 0 Then
MsgBox ("Please Select the order first"), vbCritical

Else
ListView1.Visible = False
Text8.SetFocus
Label4.Visible = False
Text7.Text = ""
Text8.Text = ""
Text3.Text = ""
Text2.Text = ""
Text1.Text = ""
End If
End Sub
If ListView1.ListItems.Count = 0 Then
MsgBox ("Please Select the order first"), vbCritical
Else
Modify.Show
Modify.Text3.SetFocus
End If
End Sub
check = 0
check = MsgBox("Are you sure you wanna logout?", vbYesNoCancel, "Choose the
Correct...")
If (check = 6) Then
ListView1.ListItems.Clear

ListView1.Visible = True
Label4.Caption = ""
Label5.Caption = ""
Label6.Caption = ""
Label4.Caption = "0"
ListView1.Top = 0
total = 0
Label22.Visible = True
Command15.Visible = True
Unload DataReport1
Unload Blank
Login_Form.Show
Else
If (check = 7) Then
End If
End If
End Sub
Call connect

If (Text7.Text = "" Or Text8.Text = "" Or Text3.Text = "") Then
MsgBox ("Please Fill All Entries")
Else
cname = Text7.Text
phone = Text8.Text
With tempbill
If (.RecordCount = 0) Then
Else
.MoveFirst
Do Until .EOF
.Delete
.MoveNext
Loop
End If
c = Val(ListView1.ListItems.Count)
i = 1
c = c + 1
Do Until i = c
.AddNew
.Fields(0).Value = (ListView1.ListItems.Item(i).Text)
.Fields(1).Value = ListView1.ListItems.Item(i).SubItems(1)
i = i + 1
.Update
Loop
End With

With pbill
mid = "MD-00010191110"
With bmemp
.MoveFirst
Do Until .EOF
.Fields(2) = 0
.Fields(3) = 0
.Fields(4) = 0
.Fields(5) = 0
.Fields(6) = 0
.Fields(7) = 0
.Fields(8) = 0
.Fields(9) = 0
.Fields(10) = 0
.Fields(11) = 0
.Fields(12) = 0
.Fields(13) = 0
.Update
.MoveNext
Loop
End With
With tmidpass
Else
.MoveFirst
Do Until .EOF
.Fields(4).Value = 0

.Update
.MoveNext
Loop
End If
End With
With eidpass
Else
.MoveFirst
Do Until .EOF
.Update
.MoveNext
Loop
End If
End With
Else
.MoveFirst
Do Until .EOF
mid = .Fields(3).Value
.MoveNext
Loop
End If
End With
mid = Val(Right(mid, 11)) + 1
gbill = "MD-" & Format(mid, "00000000000")

Frame5.Top = 7680
Frame5.Left = 13740
Label8.Caption = ""
Label9.Caption = ""
Label6.Caption = Text7.Text
Label5.Caption = Text8.Text
ser = Val(Label4.Caption) * 4 / 100
total = Val(Label4.Caption) + ser
Label8.Caption = ser

Label13.Caption = Label4.Caption
'MsgBox (gbill)
j = 1
btime = Time
With pbill
Do Until j = c
.AddNew
.Fields(0).Value = Text7.Text
'MsgBox (gbill)
.Fields(3).Value = gbill
.Fields(4).Value = Date
.Fields(5).Value = btime
.Fields(6).Value = ListView1.ListItems.Item(j).Text
.Fields(7).Value = ListView1.ListItems.Item(j).SubItems(1)
.Fields(12).Value = ser
.Fields(13).Value = total
.Fields(14).Value = Label16.Caption
j = j + 1
.Update
Loop
End With

Text7.Text = ""
Text8.Text = ""
Text3.Text = ""
With tmidpass
Else
.MoveFirst
Do Until .EOF
.Fields(4).Value = (Val(.Fields(4).Value) +
Order_Now.ListView1.ListItems.Count)
.Update
Exit Do
End If
.MoveNext
Loop
End If
End With
With eidpass
Else
.MoveFirst
Do Until .EOF
.Fields(4).Value = (Val(.Fields(4).Value) +
.Update
Exit Do
End If
.MoveNext

Loop
End If
End With
With bmemp
.MoveFirst
Do Until .EOF
k = Month(Date)
k = k + 1
.Fields(k).Value = (Val(.Fields(k).Value) +
.Update
Exit Do
End If
.MoveNext
Loop
.MoveFirst
Do Until .EOF
tot = 0
tot = (tot + Val(.Fields(2).Value) + Val(.Fields(3).Value) +
Val(.Fields(4).Value) + Val(.Fields(5).Value) + Val(.Fields(6).Value) +
Val(.Fields(13).Value))
.Fields(14).Value = tot
.Update
.MoveNext
Loop
End With
With tbemp

k = 0
'MsgBox (k)
Else
.MoveFirst
k = 0
Do Until .EOF
If (.Fields(0).Value = Date) Then
'MsgBox (k)
k = 1
Exit Do
Else
k = 0
End If
.MoveNext
Loop
End If
'MsgBox (k)
If (k = 0) Then
' MsgBox (k)
.AddNew
.Fields(0) = Date
.Update
With eidpass
Else
.MoveFirst
Do Until .EOF
If (Order_Now.Label16.Caption = .Fields(1).Value) Then
i = (Val(.Fields(3).Value))

'MsgBox ("i=" & i)
If IsNull(tbemp.Fields(i)) Then
tbemp.Fields(i) = 1
tbemp.Update
'MsgBox (i)
'MsgBox (tbemp.Fields(i))
Else
'MsgBox (i)
'MsgBox (tbemp.Fields(i))
tbemp.Fields(i) = (Val(tbemp.Fields(i)) + 1)
tbemp.Update
End If
End If
.MoveNext
Loop
End If
End With
Else
With eidpass
Else
.MoveFirst
Do Until .EOF
If (Order_Now.Label16.Caption = .Fields(1).Value) Then
i = (Val(.Fields(3).Value))
'MsgBox ("i=" & i)

tbemp.Fields(i) = (Val(.Fields(4).Value))
tbemp.Update
End If
.MoveNext
Loop
End If
End With
End If
End With
With tbemp
.MoveFirst
Do Until .EOF
For i = 1 To eidpass.RecordCount
If (IsNull(.Fields(i).Value)) Then
.Fields(i).Value = 0
End If
Next
.MoveNext
Loop
End With
End If
End Sub
Call check1
End Sub

End Sub
Call connect
With ju
Do Until .EOF
If .Fields(7).Value = Text1.Text And .Fields(6).Value = Text2.Text Then
check = 1
Exit Do
Else
check = 2
End If
.MoveNext
Loop
If check = 1 Then
phone = .Fields(2).Value
cname = .Fields(0).Value
dis = (Val(Order_Now.Label4.Caption) * 5 / 100)
Label18.Caption = dis
ser = (Val(Label4.Caption) - dis) * 20 / 100
total = (Val(Label4.Caption) - dis) + ser

Label8.Caption = ser
netamt = Val(Label26.Caption) - Val(Label9.Caption)
With pbill
Do Until .EOF
If (gbill = .Fields(3).Value) Then
.Fields(0).Value = cname
.Fields(1).Value = phone
.Fields(11).Value = dis
.Fields(12).Value = ser
.Fields(13).Value = total
.Update
End If
.MoveNext
Loop
End With
If (netamt < 0) Then
Label24.Caption = (-(netamt))
Label29.Caption = 0
.Fields(8).Value = Val(Label29.Caption)
.Update
Else
Label29.Caption = netamt
Label24.Caption = 0
.Fields(8).Value = Val(Label29.Caption)

.Update
End If
Frame5.Top = 7680
Frame5.Left = 13740
Command10.Visible = False
Label13.Caption = Label4.Caption

Text2.Text = ""
Text1.Text = ""
Else
MsgBox ("Not a memeber")
Text2.Text = ""
Text1.Text = ""
End If
End With
End Sub
End Sub
ListView1.ListItems.Clear
Label4.Caption = ""
Label5.Caption = ""
Label6.Caption = ""

Label4.Caption = "0"
total = 0
ListView1.Top = 0
Unload DataReport1
Unload Blank
End Sub
Blank.Width = 13005
Blank.Show
Blank.Enabled = False
Set DataReport1.DataSource = tempbill
DataReport1.Sections(2).Controls("label6").Caption = cname
DataReport1.Sections(2).Controls("label7").Caption = phone
DataReport1.Sections(5).Controls("Label12").Caption =
Round(Val(Label18.Caption))
DataReport1.Sections("Section1").Controls("text1").DataField = "pname"
DataReport1.Sections("Section1").Controls("text2").DataField = "price"
DataReport1.Sections("Section1").Controls("text3").DataField = "quantity"
DataReport1.Sections("Section1").Controls("text4").DataField = "vat"
DataReport1.Sections("Section1").Controls("text5").DataField = "amt"
DataReport1.Sections(2).Controls("label15").Caption = gbill

DataReport1.Sections(2).Controls("label16").Caption = Date
DataReport1.Sections(2).Controls("label17").Caption = Time
DataReport1.Refresh
DataReport1.Show
End Sub
End Sub
Text3.Text = ""
End Sub
Combo.Show
Combo.Image5.Visible = True
Combo.Frame1.Visible = False
End Sub
Salad.Show
Salad.Image5.Visible = True
Salad.Frame1.Visible = False

End Sub
Icecream.Show
Icecream.Image5.Visible = True
Icecream.Frame1.Visible = False
End Sub
Coffee.Show
Coffee.Image5.Visible = True
Coffee.Frame1.Visible = False
End Sub
Shakes.Show
Shakes.Image5.Visible = True
Shakes.Frame1.Visible = False
End Sub
Chicken.Show
Chicken.Image5.Visible = True
Chicken.Frame1.Visible = False
End Sub
Fries.Show
Fries.Image5.Visible = True

Fries.Frame1.Visible = False
End Sub
Burger.Show
Burger.Image5.Visible = True
Burger.Frame1.Visible = False
End Sub
Chocolate.Show
Chocolate.Image5.Visible = True
Chocolate.Frame1.Visible = False
End Sub
Frame4.Top = 10035
Frame4.Left = 13680
Order_Now.BackColor = RGB(241, 6, 11)
Label2.BackColor = RGB(241, 6, 11)
End Sub
Text2.SetFocus
Frame3.Left = 13800
Frame3.Top = 3840
End Sub

Else
Else
Text1.Text = ""
End If
End If
End Sub
Else
35 Or _
Else
Text2.Text = ""
End If
End If
End Sub

'MsgBox (KeyCode)
Else
KeyCode = 111 Or KeyCode = 191 Or KeyCode = 36 Or KeyCode = 32 Or
Else
Text3.Text = ""
End If
End If
End Sub
'MsgBox TypeName(Text3.Text)
Else
If (IsDate(Text3.Text)) Then
If (CDate(Text3.Text) > Date) Then
MsgBox ("Not Valid Date")
Text3.Text = ""
Text3.SetFocus
End If
Else
MsgBox ("Please Input Proper Date")
Text3.Text = ""
Text3.SetFocus
End If

End If
End Sub
Else
If KeyCode = 16 Or KeyCode = 32 Or KeyCode = 37 Or KeyCode = 38 Or
= 8 Then
ElseIf (Not ((KeyCode >= 65 And KeyCode <= 90)) Or ((KeyCode >= 97 And
KeyCode <= 122))) Then
str1 = Left(Text7.Text, Len(Text7.Text) - 1)
Text7.Text = ""
Text7.SelText = Right(str1, Len(str1))
Else
End If
End If
End Sub
k = 0
Else
k = k + 1
If (k = 1) Then
If (KeyCode = 105 Or KeyCode = 104 Or KeyCode = 103 Or KeyCode = 55
Or KeyCode = 56 Or KeyCode = 57) Then
Else
MsgBox ("Enter a Valid Number")
Text8.Text = ""

Kirtesh Khandelwal Visual Basics Project

Kirtesh Khandelwal Visual Basics Project

Recomendados

Recomendados

Mais conteúdo relacionado

Mais procurados

Mais procurados (19)

Destaque

Destaque (9)

Semelhante a Kirtesh Khandelwal Visual Basics Project

Semelhante a Kirtesh Khandelwal Visual Basics Project (20)

Último

Último (20)

Kirtesh Khandelwal Visual Basics Project