Khalid Khilji is a Projects & Procurement Manager with over 16 years of experience in textile industries. He has a BSc in Textile Science and has managed various projects involving power generation, water treatment plants, and LED lighting installation. He is skilled in communication, problem-solving, and decision making. He seeks a challenging position utilizing his expertise in engineering and operations.
1. KHALID KHILJI
Address: Plot No. A-52 KDA Officers Housing Email: Khalid@premiumtextile.com
Society Gulshan-e-Iqbal near National Stadium Email: Khalidlateefkhilji@gmil.com
Karachi, Pakistan. Cell No: 0092 333 3026505
Objective: To obtain a challenging position in a high quality engineering environment where
my resourceful experience and academic skills will add value to organizational
operations.
Education:
Completed Graduation BSc. Honors in Textile Science from Textile Institute
of Pakistan in 2000 (4 Years).
Completed FSc. Pre-Engineering from DHA Degree College for Men in 1996
(2 Years).
Completed Hsc. from Trinity Private School in 1994 (10 Years).
Related Courses: Yarn Manufacturing, Knitting, Weaving, Weave Designing, Wet Processing,
Garment Manufacturing, Polymers, ISO-9000.
Internship/ Training: Clariant Pakistan Ltd. Lab Internee 6 Weeks.
Al-Karam Textile Mills. Spinning Internee 4 Weeks.
Educational Projects: Trichromatic Combination of Reactive Dyes Color Triangle.
Calibration of dyes stuff recipes for color matching by Spectrophotometer.
Experience:
Currently Working as Projects& Procurement Manager in (Dyed Mélange
Yarn Manufacturing Firm) Premium Textile Mills Ltd. since October 2007
(9 Years).
Worked as GM Marketing & Production in DYE-TEX (Fiber & Yarn Dyeing
Factory) from January 2007 - September 2007 (9 Months).
Worked as Product Development Manager in (Dyed Mélange Yarn
Manufacturing Firm) Premium Textile Mills Ltd. from August 2000 –
January 2007 (7 Years).
2. Job Responsibilities for Projects:
1) Managed 7.5 MW CAT Power Generation System.
2) Replaced Old CAT “A” Genset Series with New CAT “C” & “E” efficient Series &
organized installation process of 3.3 MW MWM CG-260 Genset in P/House.
3) Involved in Power Load Management System.
4) 72,000 USGPD Reverse Osmosis Plant (Input 7000Tds – Output 250 Tds).
5) Designed & Installed Pumping Station & Laid 7 KM Dadex (4” Dia.) PE Pipe
Line to Pump 250000 USGPD Water to Factory.
6) Organized & managed factory’s complete Water Distribution Network
System.
7) Managed Erection & Operation of 2.5 Tons/ Hour Waste Heat Recovery
Duplex Boiler connected to Power House Engine Exhaust.
8) Steam Line Distribution Network to Supply Steam to Yarn Conditioning
Machines.
9) Recycled Steam Condensate Water back into WHR Boiler Feed Tank.
10) Installed Single Membrane Mini RO Plant to produce feed water of Zero TDS
& Zero Hardness Water for WHR Boiler & Yarn Conditioning Machines.
11) Planned & Organized all CAT Gensets Overhauling from 1st
, 2nd
Top End, In-
frame & Major + ABB Turbocharger Balancing Servicing.
12) Explored Under Ground Water by Drilling Test Bore & Developed Complete
Well.
13) Energy Saving by replacing Aluminum Fans with Fiber Reinforced Plastic
Fans in all Spinning Depart.
14) Energy Saving by replacing conventional Lighting Systems with LED Lighting
Systems.
15) Improved Spinning Production OPS & (Siro) Yarn (CLSP) Quality by using
best Siro Roving Guides.
16) Reduced Load by replacing Ring Frame’s Spindle Bolsters 20.5mm Wharve
Dia with 19mm.
17) Reduced Packaging cost by changing Murata Mach-Coner Adopter Degrees
from 5.57ᵒ to 4.20ᵒ.
18) Supervised & managed to acquire Oeko-Tex Certification.
19) Involved in Re-Designing Factories Power Distribution System to reduce
Transformation Losses.
20) Involved in company’s future plans to design & built an in-house Fiber &
Yarn Dyeing Plant.
3. Job Responsibilities for Product Development:
1) Deigned & Developed Complete Shade Card of more than 300 Color Shades
of Dyed Mélange Yarn. (Color Selection, Yarn development, Knitting,
Washing, Fabric cutting & Shade Coding)
2) Discussed technical & shade matching aspects of all kinds of Yarns & fabrics
with customers to meet their requirements.
3) Supervised & managed complete Fiber & Yarn Dyeing plans with Dyeing
Factories according to the Mélange Yarn Orders.
4) Co-ordinated with factory production departs to produce all the required
Dyed Mélange Yarns (Cotton & Synthetic Blends).
5) Prepared mélange yarn shade recipes to be cost effective using various raw
materials & blending methods.
6) Generated cost comparison reports to finalize the Yarn Production Orders.
7) Addressed all complaints & resolve them technically to acquire customer
satisfaction.
8) Supervised & Managed Yarn Hanks Indigo Dyeing process to produce
Knitted Denim Fabrics.
9) Designed such color recipes for Yarns to substitute Indigo Dyed Yarns with
Mélange yarns to produce both woven & knitted Denim Fabrics.
10)Researched & performed experiments to remove & reduce Static Charge of
Polyester Fiber in Spinning Process after dyeing.
11)Produced Vat Dyed Mélange Yarns for Towel & Bed Sheet industries to obtain
bleach fast results.
12)Have good knowledge of Fancy Yarn Spinning Process like Injection Siro,
Injection Slub, DC2 & DC3 Injection Siro/Slub, Caipo Multi-Colors Draw
Frame & Mozaic Yarns.
Job Responsibilities for Procurement:
1) Evaluating all the required Items of Purchase Indents received from Factory
Store.
2) Arranging & negotiating proposals from various Vendors Local / Imports.
3) Making cost, quality & delivery time comparison reports & finalizing PO.
4) Deliver in time all the required material to Factory Store.
5) Check store arrival reports & store issue reports.
4. 6) Keep strong check on consumable parts performance as per recommended
life.
7) Remain up-dated with market prices & trends for all sorts of materials.
8) Maintained all documents & records as per ISO Standards.
9) Develop Monthly reports to analyze, evaluate & compare variance of cost
incurred against approved Budgets.
10) Research & strive to reduce the cost of top consumed materials of Spinning
Factory by innovative ideas / material selection & interacting with vendors to
develop best materials.
Skills: Good Communication, Problem Solving, Decision Making, Ability to adjust & work
in tough situations, Computer Operating Knowledge, Speed Typing, MS Word, MS
Excel, Good Hand Writing Skills.
Language Skills: Capable to read & write English, Sindhi and Urdu.
Hobbies: Explore & Discover New Places, Listen Music, Play Soccer, Swimming, Cricket,
Volleyball, & Hiking.
Marital Status: Married.
Nationality: Pakistani.
Reference: Available on request.