HTW cap mould company overview

1. CONTACT
htw formen- und fertigungstechnik gmbh
Zementwerkstrasse 26
6713 Ludesch - Austria
t +43 (0)5550 / 20166
f +43 (0)5550 / 20166-4
office@htw-werkzeugbau.com
www.htw-werkzeugbau.com
PRODUCTS
Made in Austria
Non-Carbonated Drinks
26/22 mm, 29/25 mm, PCO 1881,
PCO 1810, 30/25 mm, 38 mm
Carbonated Soft Drinks / Hotfill
PCO 1881, PCO 1810, 38 mm
Special Caps
Custommade solutions
Cooking Oil
One or two piece solution
Agro Chemical / Motor Oil
Screw Cap or Push-Off thread
Flip Tops
1K - 2K Flip Tops
Child Resistant / Drug Container Caps
All kind of medical applications
Caps for 5-Gallon Bottles
Different designs
High Quality Cap Molds

2. MOLDS AROUND THE WORLD TOOLSTAR
HOTRUNNER
SYSTEM
PROFILE
• over 30 years of experience
• well trained and experienced staff
• export rate around 90%
• worldwide service
• individual product design
• specialist for cap production
• mold design service
• fabrication of molds with up to
96 cavities
• cycle times down to 2 sec
TECHNOLOGY
• nozzle tip cleaning directly on the
machine
• competitive prices
• independent spare parts
management
• high class after sales service
• worldwide service
CAP MOLD ENGINEERING
AHEAD OF ITS TIME
LIFE TIME
• long-term durability due to utilization
of high quality steel.
• diamont coating DLC for all moving
parts
• 5.000.000 shoots per year warranty
• mechanically protected mold
• damage-proof mold design
• Hovadur cores for cycle times down
to 2 seconds
We focus on our costumers‘ requirements and rely on our long-term ex-
perience, in order to design the best possible solution. Therefore, we apply
state-of-the-art design and machinery.
htw will provide you with extensive expertise to develop the best possible
product solution. If required a pilot mold with reduced number of cavities
can be produced within a short time for testing purposes. The knowledge
gained through testing in pilot molds can be transferred to the commercial
mold. The pilot mold as well as all commercial molds can be tested in our
in-house testing center.
In order to ensure a top performance of the molds even in extreme con-
ditions (e.g. low cycle times), we pay close attention to processing para-
meters and material selection.
www.htw-werkzeugbau.com
htw is a constantly growing molding company based in
Ludesch, Austria.
Design, development and construction represent an
essential part of htw. We offer a whole range of pre​-
fabricated cap designs as well as individual product
design. These are produced either under licences or by
specially manufactured molds.
The required tools for the production of plastic products
are manufactured in our own plant. According to the
customers‘ demand we offer mold sizes of 1 to 96 cavi-
ties.
For the operation of these tools, our own hotrunner
system toolstar or a customer preferred system can be
applied. Thereby, we establish a high process security,
which is of great importance in the field of injection mol-
ding.