All Imenco Guidewire Anchors are ROV releasable, and have as emergency / alternative release with a shear pin arrangement. The Anchors are made from high strength stainless steel and have lifetime exceeding 20 years when normal maintenance is followed. Spare parts and auxiliary equipment available from stock. Documentation and certification for more info contact Al Cohen,MBA-VPof Business Development at 713-480-7777 or ac@imenco.com

1. GUIDEWIRE ANCHOR
ROV operated anchor for efficient subsea connection of guidewires
The IMENCO guide wire anchor has been manufactured and used
for close to 12 years and is reknown in the drilling rig market for
its ease of use and dependability. Easily installed and released by
ROV makes the rig-move more comfortable.
The Guide Wire Anchor is built from high strength stainless steel and is hence very
durable and dependable.
Main features:
• Proven and patented design. Widely used worldwide since 1988
• Simple installation and release by ROV. No special tools needed
Guide wire anchor main mea- • Fits standard API guidepost with 3” receptacle hole
surements shown on figure • Release and re-installation possible in same run
above. • Shear-pin release with shear capacity up to 15000 lbs. All shear-pin parts are
automatically retrieved after operation.
• All stainless steel construction
• Supplied with full documentation and instructions.
• Special designs available on request.
• Desired shear-pin capacity to be specified when ordering.
Data:
Anchor stab diameter 74 mm
Over all length 710 mm
Standard socket wire diameter 3/4”
Weight 25 kg
Available shear-pin capacity 10000 lbs(4,5 kN)/15000 lbs(6,7 kN)
Imenco AS P.O. Box 2143 Tel. +47 52 86 41 00 E-mail address: Homepage
Stoltenberggt. 1 N-5504 Haugesund Fax. +47 52 86 41 01 imenco@imenco.no www.imenco.no