1. Vernice trasparente acrilica a due componenti
ad alta brillantezza e potere riempitivo
per finiture a doppio strato.
E’ un prodotto ad elevato residuo secco
che permette di ottenere ottimi risultati
con mezza mano di preparazione ed una di finitura;
utilizzabile anche con applicazione a mano unica.
E’ dotato di eccezionale resistenza
agli agenti atmosferici, all’ingiallimento e al graffio.
Prodotto classificato come “Finitura Speciale”
con VOC = 560 g/l, conforme al limite
di categoria imposto dalla CE 2004/42.
2K High Solid Clear Coat for double coat finishing.
It offers excellent gloss and high filling properties.
Its solid content allows to obtain very good results with
half a coat plus a finishing coat; it’s also possible to
apply it in just one coat.
It has exceptional resistance to atmospheric agents, to
yellowing and to scratches.
Product rated as a “Special Topcoat” with VOC = 560
g/l, compliant with the limit for the category set by EC
2004/42.
H55 GT CLEAR HS.
2K ACRYLIC
CLEARCOAT - HS.
H55 GT CLEAR HS.
TRASPARENTE ACRILICO
2K ALTO SOLIDO.
www.icrsprint.com
2. A) DESCRIZIONE E CAMPO D’IMPIEGO:
Vernice trasparente acrilica a due componenti ad alta brillantezza e
potere riempitivo per finiture a doppio strato. E’ un prodotto ad elevato
residuo secco che permette di ottenere ottimi risultati con mezza mano di
preparazione ed una di finitura; utilizzabile anche con applicazione a
mano unica. E’ dotato di eccezionale resistenza agli agenti atmosferici,
all’ingiallimento e al graffio.Prodotto classificato come “Finitura Specia-
le” con VOC = 560 g/l, conforme al limite di categoria imposto dalla
CE 2004/42.
B) NOTE TECNICHE:
Composizione: Resine acriliche ossidrilate
Peso specifico: 0,984 ± 0,03 kg/l
Colori disponibili: Trasparente incolore
Dati di sicurezza: Fare riferimento alla scheda di sicurezza
C) PREPARAZIONE DEL SUPPORTO:
• Base opaca per doppio strato a solvente
• Base opaca per doppio strato ad acqua
D) AVVERTENZE:
> Le vernici acriliche a due componenti temono l’umidità.
> Rispettare la corretta diluizione.
> Non utilizzare il prodotto a temperature inferiori a 5°C.
> Conservare in luogo fresco ed asciutto.
E) LAVORAZIONE:
2:1 con C03-C02-C01 potlife > 60’ a 20°C
2.1 con C15-C16-C17-C22 Per Finitura Premium
5-10 % con diluente D10-D11
15-16 “ Ford 4 mm a 20°C
1,2-1,3 mm 2,5-3,5 bar
1-2 = 45-55 micron
1,4-1,5 mm 3,5-5 bar
1-2 = 45-55 micron
10’-15’ di appassimento a secondo della temperatura
A 23°C Indurimento : 7-8 h . Lucidatura : 15-16 h.
A 60°C Indurimento : 30’. Lucidatura 30’ dopo raffreddamento.
10’-15’ a 1 mt.
F) PULIZIA DEGLI ATTREZZI:
> Con diluente per poliuretanici.
Le informazioni tecniche ed i suggerimenti sono conformi a quanto risulta dalle nostre
esperienze. Noi assicuriamo la perfetta qualità del prodotto. Tuttavia, non essendo le
condizioni di utilizzo sotto il nostro controllo, non assumiamo nessuna responsabilità sui
risultati ottenuti.
IT SCHEDA TECNICA H55
GT CLEAR HS
Trasparente acrilico bicomponente alto solido
GT CLEAR HS
2K acrylic clear coat - HS
A) DESCRIPTION AND FIELDS OF APPLICATION:
2K High Solid Clear Coat for double coat finishing. It offers excellent
gloss and high filling properties. Its solid content allows to obtain very
good results with half a coat plus a finishing coat; it’s also possible to
apply it in just one coat. It has exceptional resistance to atmospheric
agents, to yellowing and to scratches.Product rated as a “Special Topco-
at” with VOC = 560 g/l, compliant with the limit for the category set
by EC 2004/42.
B) TECHNICAL DATA:
Composition: Hydroxylated acrylic resins
Specific weight: 0.984 ± 0,03 kg/l
Available colours: Colourless, transparent
Safety data: Refer to the Safety Sheet (MSDS)
C) SURFACE PREPARATION:
• Matt base for double coat solvent thinning finishes
• Matt base for double coat water thinning finishes
D) CAUTIONS:
> 2K acrylic paints are affected by moisture.
> Respect correct reduction.
> Do not use the product at temperatures below 5°C.
> Keep in a cool, dry place.
E) PROCESSING:
2:1 C03-C02-C01 Pot life >60’ at 20°C
2:1 C15-C16-C17-C22 for Premium Finishes
5-10 % with D10-D11 thinner
15”-16” Ford 4 mm at 20°C
1,2-1,3 mm 2,5-3,5 bar
1-2=45-55 microns
1,4-1,5 mm 3,5-5 bar
1-2=45-55 microns
10’-15’ flash-off time depending on the temperature
At 23°C : Time Dryng : 7-8 h. Buffing Time: 15-16 h.
At 60°C : Time Dryng : 30’. Buffing Time : 30’ after cooling.
10’-15’ at 1 m.
F) TOOLS CLEANING:
> With thinner for polyurethane products.
Technical indications and advices are based on our own experiences.
We assure the perfect quality of products. However, being the utilization out of our
control, we assume no responsibility on the results obtained.
EN TECHNICAL SHEET H55
I.C.R. S.p.A. ITALIA - Reggio Emilia Tel. + 39/0522.517803 – Fax + 39/0522.514384 E-mail: info@icrsprint.it – www.icrsprint.com |
ICR SPRINT COATING UK LTD UK - London - T: 01278802011 E-mail: enquiries@icrsprint.co.uk www.icrsprint.com |
ICR SPRINT INC USA - Fall River - MA - T: 800 980 4071 E-mail: icrsprintusa@gmail.com www.icrsprint.com |
ICR Ibérica, S.A. SPAIN - Tel. +34/901 101 408 E-mail: info@icriberica.com www.icriberica.com