We provide mechanical, electrical, and plumbing (MEP) engineering design services all under one roof. With our technical expertise and multidisciplinary approach to building services design we can bridge the gap between the requirements of the client and efficiency of planning.
Our team is equipped to handle project of all sizes. We have a varied platter of project, from Hospitality, Malls, IT Parks, Commercial Towers, High Rise Residential Towers, Residential Townships, Sports Complex and Mixed use buildings. Our scope included concept, feasibility study, master planning, design services, contract preparation, site visits and implementation up to commissioning.
3. ABOUT GODREJ
• Founded in 1897 by Late Mr. Ardeshir Godrej & Mr. Pirojsha Godrej, we are India’s
largest family-owned company
• Main facility spread over 3200 acres in Mumbai
• Sales revenue US $3.7 billion (As on 31st March, 2013)
• All India presence with 21 Branches & 60 Showrooms
Ardeshir
Godrej
Pirojsha
Godrej
4.
5. GODREJ ELECTRICALS & ELECTRONICS
Godrej Electricals and Electronics (E&E) is as old as the Company itself.
The internal expertise gained over the years helped us to provide services
to external customers in areas of
Green Building Consultancy Services (GBCS)
Power Distribution Solutions (PDS)
MEP Projects (MEP)
Compressed Air Solutions (CAS)
Industrial Electronics & Automation (IEA)
Power Infrastructure & Renewable Energy (PIRE)
11. DESIGN APPROACH
• Design Optimization
• Customized Solution
• Efficient Technologies
• Recycle – Reuse
• Monitoring & Control System
• Commissioning & Quality Check
• Post Occupancy Review
12. GODREJ IT PARK
Location: Vikhroli, Mumbai
Site Area: 3 Lac Sqfts
Building Square footage: 1.4 million Sqft
No. of Floors: 1 B + S + 2 P + 6
Rating: LEED CS - Platinum
14. ENERGY SIMULATION
• This helps to evaluate building performance at the early stage
& identify ECM’s to enhance the performance
15. BUILDING ENVELOPE
Opportunity to reduce the overall building consumption by 2-3%
• Exterior Wall: AAC blocks instead of conventional brick
• Optimized WWR to 25 % by using spandrels
• Reduced heat load through Glass by using DGU against conventional
SGU
– SHGC : 0.23 against conventional
SHGC of 0.5
• Roof: Over deck insulation + 3 inch
Polyurethane board and terrace garden
16. HVAC SYSTEM
HVAC uses 60% or more of energy consumption & thus efficient design will
enhance the overall performance
• Efficient Water Cooled Centrifugal Chillers (COP – 6.4)
• Variable Secondary Pumping
• Cooling Tower with variable speed drive (VSD)
• Heat recovery
• Demand Control Ventilation
• CO based Basement Fan
Modulation
17. LIGHTING SYSTEM
• Efficient Lighting using T5 & LED’s
– LPD of 0.8 W/Sqfts against 1 W/Sqfts in services & common areas
– 0.23 W/ft2 in the basement against 0.3 W/Sqfts
• Times & Occupancy based controls in common areas to be considered
18. PLUMBING SYSTEM
50% water savings compared to
conventional building
• Low flow plumbing fixtures
• Onsite Waste Water Treatment
• Waste Water reuse for irrigation,
flushing & cooling tower make-up
• Efficient Irrigation System
• Rain water Harvesting Systems
19. MONITORING & CONTROL
• Automated Operations through Building Management System
• Metering & Monitoring System is integral part of design
20. BUILDING COMMISSIONING
• Independent Commissioning Team to
evaluate the design wrt Owner’s &
Operational requirement
• Factory Inspections
• On-site testing & Commissioning
• Performance Validation Report
21. POST OCCUPANCY REVIEW
• Trainings:
– For Operations and Maintenance (O&M) staff of the
project building
• Measurement and analysis:
– Comparing Energy & Water consumption with the
design parameters (upto 1 yr)
23. MASTER
PLANNING &
CONCEPT
DESIGN STAGE
SCHEME
DESIGN STAGE
DETAIL DESIGN
STAGE
TENDER
STAGE
CONSTRUCTION
STAGE
INSPECTION &
DOCUMENTATION
Engineering studies based on
architectural drawings
Cost benefit options of different
technologies.
Development of sustainable strategies
Assistance for statutory & other
approvals.
Preparation of concept design basis
report
Preliminary engineering design and
calculations.
Preliminary engineering drawings & space
planning.
System configuration & equipment
selection.
Value engineering & alternate design
solutions.
Preparation of schematic design basis
report.
Finalize the design criteria
Detail drawings with all floor & external
layouts.
Co-ordination with Architect & Interior
Designer.
Building information modeling (Optional).
Preparation of final design basis report.
Preparation of bill of quantities & cost
estimation.
Tender drawings & specifications.
Participating in pre-bid meeting.
Scrutinizing quotations received from
contractors.
Award of contract.
Kick-off meeting with all
contractors.
Review & approval of contractor’s
Shop/GFC drawings.
Periodic site visits for quality
checks.
Inspection of major equipment’s
Review final commissioning report
METHODOLOGY
24. DELIVERABLES
• MECHANICAL (HVAC)
Heat Load Calculations
Project Scheme Design
Equipment Selections
Air Distribution Scheme & Piping Design
Ventilation Systems
Staircase / Lift well Pressurization System
Control System
Air Distribution Scheme & Piping Design
Ventilation Systems
Staircase / Lift well Pressurization System
Control System
• ELECTRICAL
Project Scheme Design
HT/LT Distribution System
Electrical Load Calculations
Back-up Power Arrangement
Cabling & Bus Riser System
Panel & Cable Schedules
Lighting & Power Scheme Design
Earthing
Lighting & Renewable
25. DELIVERABLES
• LV SYSTEMS
Fire Alarm System
Public Address System
Access Control System
Integrated Building
Management System
Tele-communication System
CCTV System
Parking Management System
• PHE:
Project Scheme Design
Water Demand Calculations
Water Storage & Distribution
Drainage System
Rain Water Harvesting
Sewage Treatment Plant
Fire Hydrant & Sprinkler System
31. VALUE ADDED SERVICES
• Building information modelling (BIM) is an intelligent model-based process
which not only manages graphics but also helps in automatic generation of
drawings, reports and design analysis.
• Some of the Benefits of BIM are:
1. Enhanced coordination, less errors and quantitative error check
2. Detailed 3D Model for reference and actual visualization
3. Final GFC with all the service plans updated
4. Accurate quantity take-offs
5. Get all the GFCs before construction
6. Reduce construction wastes
7. No clashes in the service drawings which can save time, money and efforts
8. Estimate Bill of Quantities for construction
9. Faster project delivery
10. Better outcomes through collaboration
34. | ELECTRICALS & ELECTRONICS
Name Mr. Rumi Engineer – Head, Green Building & MEP Design Consultancy
Proposed position
and involvement on
Team
Project Director
Professional
Qualifications
• Bachelors in Electrical Engineering
• LEED AP
• GRIHA Trainer & Evaluator
• BEE Certified Energy Manager
Years of Professional
Experience
32 yrs
Profile summary
Mr. R. P. Engineer leads the Green Building Consultancy Services & Energy
Conservation Dept. at Godrej and Boyce Mfg. Co. Ltd (G&B). Throughout his
association with G&B, for more than 30 years, he has donned versatile roles
encompassing Operations and Maintenance of Industrial Processes and Systems,
Project Management and Energy Management Services. His passion for Sustainability
and Energy Conservation is evident through his active involvement in more than 400
Green Building projects spread across India.
Mr. Engineer is a LEED AP, certified by USGBC, and a BEE certified Energy Manager.
He has also been certified as a Sustainability Assurance Practitioner by CII-ITC Centre
of Excellence for Sustainable Development, and GRIHA Trainer & Evaluator. He is also
a member on the panel of CII IGBC’s Mumbai Chapter and conducts training programs
on behalf of CII IGBC.
MEP TEAM
35. | ELECTRICALS & ELECTRONICS
MEP TEAM
Name Mr. Abhijit Pisal – AGM Projects
Proposed position
and involvement on
Team
Project Manager – MEP Design
Professional
Qualifications
• Bachelors in Electrical Engineering
• LEED AP
• Certified LEED/GRIHA Trainer & Evaluator
• BEE Certified Energy Auditor
Years of Professional
Experience
14 yrs
Profile summary Leads the team of consultants in western & eastern region working on:
• Green Building Consultancy services
• MEP design consultancy services
• Energy management & Audits
• Carbon Footprint Mapping
Extensive experience in providing Green building consultancy for IT parks,
commercial, residential, Townships, Hospitality, Institutions & industrial
projects. Worked on all the rating systems viz. LEED NC/CS, IGBC
Homes/Factory/Township, USGBC existing building/CI & GRIHA. Hands on
experience on Installation, Start up and Commissioning of MEP systems.
Design & peer review of Electromechanical systems. Energy conservation
activities – Audit & execution
36. | ELECTRICALS & ELECTRONICS
MEP TEAM
Name Mr. Pramod Menthe – Sr. Manager
Proposed position
and involvement on
Team
Lead Engineer – HVAC Design
Professional
Qualifications
Diploma in Electrical Engineering
Years of Professional
Experience
19 yrs
Profile summary • Design & Planning of HVAC systems as per international standards &
LEED requirement
• Design reviews of HVAC systems
• Co-ordination of MEP System
• Facilitation of Projects
Some of the Key Projects Handled:
1. IT Parks / Data Center : Eserve International - Mumbai
2. Hotels & Hospitality: Trident Hilton, BKC, Mumbai
3. Commercial towers/ Corporate Offices : The Capital (Wadhawa Builder)-
BKC Mumbai (3,50,000 Sq. Ft)
4. Malls & Multiplex : Atria Mall– Mumbai (1,90,000 Sq. Feet)
5. Industrial Setups :Bajaj Auto-Pune
37. | ELECTRICALS & ELECTRONICS
Name Mr. Mayur Bhanushali – Deputy Manager
Proposed position
and involvement on
Team
Lead Engineer – HVAC Design
Professional
Qualifications
• Bachelors In Mechanical Engineers.
• PGDMS In Material Management.
Years of Professional
Experience
6 yrs
Profile summary • Starting from concept design to detail design, estimation& planning of
HVAC Systems.
• Design reviews of HVAC’S systems.
• Co-ordination of MEP services.
• Preparing the Tendering document of Projects.
Key Projects Handled -
1. Future group Projects like Central, Hyper city, Big Bazar.
2. King Khalid Medical City – UAE (1500 beds)
3. Dhirubhai Ambani International Conventional & Exhibition Center (G+14
Floors, 10,000 TR HVAC Load, Floor Plate – 67,000 sq.mt.)
4. Lodha Commercial
5. L & T Data & Training Center
6. IBM @ Airoli
7. Nahar School
MEP TEAM
38. | ELECTRICALS & ELECTRONICS
Name Mr. Velmani Muthu – Asst. Manager
Proposed position
and involvement on
Team
Lead Engineer – HVAC Design
Professional
Qualifications • Bachelors In Mechanical Engineering (Pursuing)
• Diploma in Mechanical Engineering
Years of Professional
Experience
7 yrs
Profile summary • Starting from concept design to detail design, estimation & planning of
HVAC Systems.
• Design reviews of HVAC’S systems.
• Co-ordination of MEP services.
• Preparing the Tendering document of Projects.
Key Projects Handled -
• Forum Shantiniketan Mall (9,50,000 Sq. Ft.)
• Lotus Mall – Mangalore (1,30,000 Sq. Ft.)
• Micro Lab Pharma Project – Veerasandra –Bangalore (2,50,000 Sq. Ft.)
• Qatar Developer Gulf Project – UAE
• RMZ-Galleria-Residential -Bangalore (1,00,000 Sq. Ft)
MEP TEAM
39. | ELECTRICALS & ELECTRONICS
MEP TEAM
Name Ms. Yogita Shirsath – Deputy Manager
Proposed position
and involvement on
Team
Lead Engineer – Electrical Design
Professional
Qualifications
• B.E. Electrical
• Diploma in Electrical
Years of Professional
Experience
10 yrs
Profile summary • Starting from concept design to detail design, estimation& planning of
Electrical & LV systems.
• Design reviews of Electrical & LV systems.
• Co-ordination of MEP services.
• Testing & Commissioning of Projects.
Some of the Key Projects Handled:
1. Residential projects: Jade Residence, Wagholi – 10 Lacs Sq. Ft.
2. Commercial Towers: Venus Mall, Solapur – 1.2 Lacs Sq. Ft.
3. Industrial: Amway Manufacturing Unit, Madurai – 5 Lacs Sq. Ft.
4. Hotels & Hospitality: Retreat 5 Star Hotel, Navi Mumbai – 2 Lacs Sq. Ft.
5. International School: Educomp International School, Indore – 2 Lacs Sq.
Ft.
40. | ELECTRICALS & ELECTRONICS
Name Mr. Gaurav M Tawde- Assistant Manager
Proposed position
and involvement on
Team
Lead Engineer – Electrical Design
Professional
Qualifications • Post-Graduation In Operations Management.
• Bachelors In Electrical Engineering.
• Diploma In Electrical Power Systems
Years of Professional
Experience
6 yrs
Profile summary • Starting from concept design to detail design, estimation& planning of
Electrical & LV systems.
• Design reviews of Electrical & LV systems.
• Co-ordination of MEP services.
• Testing & Commissioning of Projects.
Project Handled with Expertise in field of -
• Water’s Edge Complex, Bangalore
• Sai Snehdeep Hospital Kopar Khairane, Navi Mumbai
• Veedol Engine Oil Plant, Oragadam, Chennai
MEP TEAM
41. | ELECTRICALS & ELECTRONICS
Name Mr. Nikhil K Sharma - Assistant Manager
Proposed position and
involvement on Team
Lead Engineer – Electrical Design
Professional
Qualifications
• Bachelors In Electrical Engineering.
Years of Professional
Experience
3 yrs
Profile summary • Starting from concept design to detail design, estimation& planning of
Electrical & LV systems.
• Design reviews of Electrical & LV systems.
• Co-ordination of MEP services.
• Testing & Commissioning of Projects.
Project Handled with Expertise in field of -
1. High Rise Residential Towers – Sun World City, Greater Noida -
(45,30,240 Sqft)/ Homeland Heights, Mohali (Punjab) – (5, 47,010 Sqft)
2. Hospitals – Suraynsh Hospital, Moradabad (U.P.) – (19,368 Sqft)
3. Hotels- Armani Hotel, Jalandhar(Punjab)- (11,136 Sqft)
4. Corporate Offices – Innovation Technology Park, Kingdom of Swaziland,
Africa – (17,044 Sqft)
5. Educational Institutes – J & K Islamic University (J&K)- (14,257 Sqft)
6. Industrial Development – Pasco Automobile, Faridabad(Haryana)- (59,040
Sqft)
MEP TEAM
42. | ELECTRICALS & ELECTRONICS
MEP TEAM
Name Mr. Vaibhav Bane – Sr. Manager
Proposed position and
involvement on Team
Lead Engineer – Plumbing & Fire Fighting Design
Professional
Qualifications
B.E. Mechanical Engineering
Diploma in Production Engineering
Diploma in Mechanical Engineering
Years of Professional
Experience
11 yrs +
Profile summary Skilled in Green Building Concept, supervising projects with respect to cost,
resource deployment, time over-runs and quality compliance; evaluating
project progress & taking adequate corrective actions. In-Depth
understanding and knowledge about Plumbing & Fire Fighting Projects.
Some of the Key Projects Handled:
1. High Rise Residential Tower: Exquisite Towers , Oberoi Realty
(3B+Stilit+50 storied, Total Built Up area – Approx.15 lac sq.ft.)
2. High Rise Residential Tower: Ashok Towers, Peninsula Land Pvt. Ltd.,
(Stilt+49 storied, Total Built Up area – Approx. 10 lac sq.ft.)
3. High Rise Residential Tower: Zeon Towers, Ajmera (G+45 storied, Total
Built Up area – 5 lac sq.ft.)
4. Retail: Inorbit Mall, Vashi ( Total Built Up Area – 4 lac sq.ft.)
5. Commercial Tower: Supreme House, Andheri by Supreme Industries
(2B+Stilt+13 storied, Total Built Up area – 1.4 lac sq.ft.)
43. | ELECTRICALS & ELECTRONICS
MEP TEAM
Name Mr. Sachin Gaikwad – Asst. Manager
Proposed position and
involvement on Team
Lead Engineer – Plumbing & Fire Fighting Design
Professional
Qualifications
Bachelors Degree in Production Engineering
Advance Diploma in Industrial Safety (MSBTE)
Years of Professional
Experience
5 yrs
Profile summary Proficient in Detail design of Plumbing & Fire Fighting Systems. Skilled in
Design reviews of PHE services and Co-ordination of MEP services.
Some of the Key Projects Handled:
Commercial towers:
1. Maker Maxity Mall (35,0000 sq.ft)
2. Neelkanth IT Park (2,00,000 sq.ft )
Corporate Offices:
1. Bombay Dyeing Compund (2,00,000 sq.ft )
2. TCS Adibatla (40,00,000 Sq ft)
Residential Projects:
1. Runwal Garden City
2. TCS residential complex, Kolkata