1. All Aluminium Alloy Conductors (AAAC)
CharacteristicsHigh Tensile Strength- About twice that of Aluminium EC 1350
Weight- 20 % (Approx.)lighter than ACSR conductor of equal diameter
Excellent Corrosion Resistance-It has a high resistance to atmospheric
corrision
Good Strength to Weight Ratio
Lower Electrical Losses- Low electrical losses compared to ACSR
Moderate Conductivity –52.5% IACS
Ideal for seacoasts, saline and corrosion prone areas.
Typical ApplicationTransmission and Distribution applications in corrosive environments, Suited
as an alternate to ACSR depending on line engineer needs.
Product Catalog- AAAC ( All Aluminium Alloy Conductors)
Disclaimer: All the data set out in this catalogue is given for information purpose only and Galaxy shall not be held
responsible for its accuracy.
-1-|Page

2. Actual Area
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
mm2
mm
15
22
34
55
80
100
125
148
173
200
232
288
346
400
465
525
570
604
642
695
767
3/2.50
7/2.00
7/2.50
7/3.15
7/3.81
7/4.26
19/2.89
19/3.15
19/3.40
19/3.66
19/3.94
37/3.15
37/3.45
37/3.71
37/4.00
61/3.31
61/3.45
61/3.55
61/3.66
61/3.81
61/4.00
Approximate
Overall
Diameter
Approxima
te
Mass
mm
Sr.No.
Stranding &
wire Diameter
Calculated
Max.
Resistance at
200 C
Kg/Km
Ohm/Km
5.39
6.00
7.50
9.45
11.43
12.78
14.45
15.75
17.00
18.30
19.70
22.05
24.15
25.97
28.00
29.79
31.05
31.95
32.94
34.29
36.00
40.15
60.16
94.00
149.20
218.26
272.86
342.51
406.91
474.02
549.40
636.67
794.05
952.56
1101.63
1280.50
1448.39
1573.71
1666.00
1771.36
1919.13
2115.54
2.3040
1.5110
0.9900
0.6210
2.4250
0.3390
0.2735
0.2290
0.1969
0.1710
0.1471
0.1182
0.0984
0.0829
0.0734
0.0651
0.0598
0.0568
0.0534
0.0492
0. 0446
Approx
Calculated
Breaking
Load
KN
4.33
6.45
10.11
16.03
23.41
29.26
36.64
43.50
50.54
58.66
68.05
84.71
101.58
117.40
136.38
146.03
158.66
167.99
178.43
193.25
213.01
NOTES:
The sectional area of stranded conductor has been taken as the sum of the cross-sectional area of the individual wires.
Maximum resistance values of stranded conductor have been calculated on the basis of maximum resistivity and the cross
sectional area based on the minimum diameter.
Product Catalog- AAAC ( All Aluminium Alloy Conductors)
Disclaimer: All the data set out in this catalogue is given for information purpose only and Galaxy shall not be held
responsible for its accuracy.
-2-|Page

3. Product Catalog- AAAC ( All Aluminium Alloy Conductors)
Disclaimer: All the data set out in this catalogue is given for information purpose only and Galaxy shall not be held
responsible for its accuracy.
-3-|Page

4. Product Catalog- AAAC ( All Aluminium Alloy Conductors)
Disclaimer: All the data set out in this catalogue is given for information purpose only and Galaxy shall not be held
responsible for its accuracy.
-4-|Page

5. Product Catalog- AAAC ( All Aluminium Alloy Conductors)
Disclaimer: All the data set out in this catalogue is given for information purpose only and Galaxy shall not be held
responsible for its accuracy.
-5-|Page