FARO develops and markets portable CMMs (coordinate measuring machines) and 3D documentation devices to solve dimensional metrology problems.
Technology from FARO permits high-precision 3D measurement, documentation and comparison of parts and compound structures within production and quality assurance processes. The devices are used for inspecting components and assemblies, production planning, documenting large volume spaces or structures in 3D, and more. FARO’s 3D measurement technology allows companies to maximize efficiencies and improve processes.
2. Vita
Johannes Rechenbach, Architect
• Diploma 1992 in Berlin
• Own Architecture Firm in Hanover, Germany since 2000
• 20 Years of Experience in all Phases of Planning and Building
• Reconstruction Projects and New Buildings
• 3D-Scan-Service and Support, FARO Architecture Network
Kleegarten Seniorenresidenz Hanover 2006
laser-scanning-architecture.com
4. Challenge of today:
Energy-efficient Restoration of existing Structures
• Problem
Accurate visual and geometrical Documentation
• Complexity
Necessity of precise Detailing for energetic Sufficiency
• Liability
Higher Risk compared to new Constructions
50% Restoration!
laser-scanning-architecture.com
5. Present 2D-Documentation:
• Higher Planning Expenses
because of missing or incorrect Documentation
• Higher Building Expenses
because of unsufficient Documentation for the Tender Procedure
• Loss of Building Quality and Increase of Construction Time
because of late Detail Decisions during the Building Process
not economical!
laser-scanning-architecture.com
7. Preoccupations against 3D-Laserscanning:
• highly expensive, therefore suits FARO Focus3d cuts
only specific purposes hardware costs by 50%
• huge amount of data, not suitable for great workflow with 64 bit
the average client Systems + up-to-date Software
• post-processing very time-consuming easy with Autocad + Revit
and not efficient
this is History!
laser-scanning-architecture.com
8. 10 Scan-Positions in 3 Hours:
undistorted Floor-Plan Extraction for your CAAD
laser-scanning-architecture.com
9. 10 Scan-Positions in 3 Hours:
undistorted Sections at any desired Location within the 3d-Model
laser-scanning-architecture.com
10. 10 Scan-Positions in 3 Hours:
creative Animations at any desired Location within the 3d-Model
laser-scanning-architecture.com
11. 10 Scan-Positions in 3 Hours:
creative Animations at any desired Location within the 3d-Model
laser-scanning-architecture.com
19. USA:
General Services Administration GSA BIM Guide Series:
„The benefits of determining the spatial environment and as built conditions (by
3D-Imaging) have played a key role in reducing costs and delivering a higher
quality engineering effort.”
Advice: Use of 3D-Imaging and BIM for best results in public building
projects
England:
Introduction of BIM for all public building projects until 2016.
37.000 public buildings with heritage value.
Sweden und Finland:
BIM is mandatrory for the building application – no more 2D drawings
Germany: ……….???
laser-scanning-architecture.com
20. Scan of an industrial historic Building
for the Project Development in Berlin
laser-scanning-architecture.com
21. Advantages:
• only one Time on Site without taking Measurements again and again
• no more Mistakes and Failure because of wrong or missing Information
• one Data Model for all Extractions
laser scanning architecture
22. Faro Webshare: • Project-Documentation in the Internet
• Visual Analysis in 360° Panoramas
• Measurements for Distances and Spaces online
laser-scanning-architecture.com
23. 2D-Images
using PointCab
Steel framework
of the Roof Construction:
accurate Measuring in CAAD
Documentation of the
as-built Situation:
- Brick Formats
- Wall Details
- structural Damages
laser-scanning-architecture.com
24. Import of Pointcloud Data into Revit: Basis for Modeling the existing Building
laser-scanning-architecture.com
25. Import of Pointcloud Data into Revit: Basis for Modeling the existing Building
laser-scanning-architecture.com
26. Import of Pointcloud Data into Revit: Basis for Modeling the existing Building
laser-scanning-architecture.com
27. Import of Pointcloud Data into Revit: Basis for Modeling the existing Building
laser-scanning-architecture.com
28. Import of Pointcloud Data into Revit: Basis for Modeling the existing Building
laser-scanning-architecture.com
29. Import of Pointcloud Data into Revit: Basis for Modeling the existing Building
laser-scanning-architecture.com
30. Import of Pointcloud Data into Revit: Basis for Modeling the existing Building
laser-scanning-architecture.com
31. Import of Pointcloud Data into Revit: Basis for Modeling the existing Building
laser-scanning-architecture.com
32. 3D-Imaging for Restoration Projects
Planning with 3D-Scans in Revit Architecture
Public Church Building near Hanover, Germany
Revit-Model by rechenbach architecture
laser-scanning-architecture.com
33. Panoramic View with 3D-Measurements in Scansoftware FARO Scene
laser-scanning-architecture.com
34. Panoramic View with 3D-Measurements in Scansoftware FARO Scene
laser-scanning-architecture.com