2. Production of cargo drones for
crop dusting on global B2B
US&Canada markets
We are preparing for product
launch in the hottest
Canadian agriculture market
in 2017
3. TABLE OF CONTENTS
1. Main farmers’ pains that we’re solving
2. Our solution
3. Precision agriculture & Kray Protection
spraying system
4. Market overview
5. Competition
6. Technical datasheet & project progress
7. Contact info
5. Money & time investment
Application of crop protection impacts up to 70% of yield, defining farmers prosperity.
Thus outsourcing it to aerial or other services leads to limited control and vulnerability.
Too costly
Crop protection with ground application
takes up to 20% of crop value due to
trampling and requires a big equipment
capex.
Aerial application with currently available
aviation services can cut these costs roughly
in half to $25-50 per hectare.
Aerial application in 78% of cases is
outsourced, thus prone to capacity shortage.
Time constraints
The crop protection needs to be applied
in particular moment of the crop or pest
life cycle (often window is limited to 1
day).
So being able to make it exactly when it
is needed is very important and not
possible with current states of things in
any way of application.
Kray Protection UAS is a reliable, inexpensive, in-house, productive aerial
solution for crop protection application that could solve these severe pains,
experienced by any farmer with middle-sized acreage.
7. Compound multirotor
2m sized UAV
VTOL UAV utilizes central
wing and horizontal thrust
rotor along with lift rotors.
Max speed of
110 km/h
Maintaining low energy
consumption, as lift force is
divided between lift rotors
and wing.
Automated spraying
mission
We use fast stereo vision
solution to create a real-
time surface map and
obstacle avoidance.
Precise GPS navigation
It allows our UAV to follow
crop surface on minimal
altitude of 1 m, avoiding
collisions with ground and
obstacles on the route
automatically.
Coverage speed
27-37 hectares/hour for
chemical application. It
competes with the highest
coverage speeds achievable
with ground robotic & aviation-
base aerial application
solutions. Our solution is
applicable on the field of any
size, on any crop and at any
ground conditions.
Cost of operation
$1-2 per hectare, which is
20-50 times less than
currently available aerial
application services. This
drone replaces aviation
services on fields up to
1000 hectares, being
typically paid back in less
than 1 year.
Kray Protection: cargo drones for crop
protection
9. The most challenging aspects of aerial
crop protection are:
◍ Reaching maximum yielding capacity
◍ Uniform pesticide application on different
speeds and dosages
◍ Controlled drop application to prevent different
drop sizes
◍ Precision control of dosage in accordance with
application map
10. “Yield capacity in developed
countries is 2 times higher than in
developing countries due to clever
crop protection techniques
application
11. Advanced ultra-low volume spraying
system
Coverage quality
We’ve reached the best
spraying coverage quality on
different speeds of UAV and
application dosages due to
rotary atomizers spraying
design.
This way we simultaneously
change the flow and rotor
spin speed to maintain
stable drop size.
This technique allows us to
uniformly cover all field,
including field borders.
Drop size
Drop size can be adjusted
(30 to 90 micron with
variations of only ±10%).
This allows to use UAV for
insecticides, herbicides and
fungicides application as
well as for foliar dressing.
Pesticide economy
Ultra-low volume
application allows not only
to cover big acreages with
low application cost.
It increases application
efficiency of pesticides up
to 3 times (e.g. for
Roundup) making
substantial economy by
reducing usage of
expensive chemicals.
12. ADVANTAGES OF OUR SPRAYING SOLUTION
◍ Spraying cost decreased by 10 times
◍ Herbicide cost decreased up to 3 times
◍ Maximized yield capacity
14. “Aerial application drones market of US and
Canada is estimated at $1.8B annually with
formation in next 3 years and occupation in
8 years
15. Our estimation is based on the following
data:
◍ More than 50% of total US&C cropland is operated by farms with
acreage of 50-1000 hectares with median of 310 hectares in Canada
◍ About 90% of farmers use aerial application, paying $25-$50 per
hectare
◍ About 60% of Canadian farmers currently use drones for monitoring
and precision agriculture aerial mapping
◍ About 22% of farmers have their own aircraft for crop protection
◍ Total number of farmers in Canada is about 200K
◍ 1 unit of our drone can cover up to 300 hectares of cropland
◍ In total, about 200 000 drones are required for the middle-acreage
farms of US&C
◍ 6 years is a usual turnover time for light agricultural machinery market
◍ Drone regulation for agricultural market already allows commercial
application in Canada with routine yearly permission from regulator,
and in the US, where FAA certification of solution is needed in addition.
16. Sales start:
◍ End of 2016 pre sales market check with Fundable
platform
◍ Direct sales start in 2017
◍ Channel sales through precision agriculture service
providers, chemicals manufacturers, machinery distributors
18. Coverage speed
Existing solutions
underperform
compared to Kray
Protection UAV,
covering just 2-7
hectares per hour
Payload
Existing solutions allow
to load only 5-14 litres
of chemicals.
Kray Protection UAV
chemical load is up to
22,5 litres with the
highest payload-to-
weight ratio of 0.8
Applicability
Existing solution are not
fully automated so are not
applicable for big fields
dusting.
Kray Protection UAV
maintains position with the
lowest altitude on high
speed, and avoids
obstacles automatically
Currently there is no professional UAV
solution for crop dusting
Drawbacks of existing solutions:
Existing solutions do not cover middle and big acreage
fields, being appropriate for small households. Due to
high cost of the solutions, payback time can reach up
to several years
19. “Competitor analysis shows that currently
there is no analogies to Kray Protection
solution in the world
21. Kray Protection datasheet:
MTOW 35 kg
Type Compound octocopter
Diameter, by motor axes 200 cm
Diameter, by prop tips 275 cm
Height 90 cm
Wing plane form 148x54 cm elliptic
Wing area 0.63 m2
Power unit 1x 16-22 AH 6s Li-Po battery
Thrust propeller 24”x14” carbon fiber
Thrust motor 1100 W BLDC
Lift propellers 29”x9.5” carbon fiber
Lift motors 750 W BLDC
Chemicals tank 22.5 l
Application strip width 5 m
Application dosage 1-7 kg/hectare
Operational speed 25 m/s
Ground-based obstacle avoidance automated, from 1 m height
Round time up to 25 min
Round coverage up to 14 hectare
Performance up to 36 hectare/hour
Details available here
22. Project progress in the last 6 month
◍ We raised seed investment round of $300k+
◍ We’ve formed a dedicated team working specifically
on this project.
◍ We’ve developed unmanned aerial technology stack
and solutions, mainly:
- compound multirotor prototype platform
- 1.5 kW 2-stroke generator of 1.2 kW/kg power
density
- Autonomous navigation prototype
23. Project scope & progress bar
Aircraft prototyping 100%
Power unit prototyping 100%
Control system prototyping 100%
Computer vision prototyping 100%
UAV prototype testing 100%
90%
60%
Computer vision system development 40%
Spraying system development 30%
UAV manufacturing 10%
Promo marketing 10%
UAS application researches 5%
Production placement 5%
UAV testing 0%
Wide marketing 0%
Control system development
Aircraft modeling
24. Automatic precise field processing due to fast stereo vision solution creates a
real-time surface map and avoids obstacles
Computer vision
25. Unique compound engine design: VTOL UAV utilizes central
wing and horizontal thrust rotor along with lift rotors
UAV in development
26. Ultra low volume spraying system
Clean yield and pesticide cost decreases up to 3 times due to increased activity
in high concentrations of application
28. Thank you!
For more information:
◍ Please contact us in Facebook and LinkedIn
◍ Email Kray Technologies CEO Dmytro Surdu at
dmytro.surdu@kray.technology