1. 3D LASER SCANNING
See Accuracy
See Certainty
See Solutions

2. 3D Laser Scanning
CTS provides full-service high definition 3D laser scanning that is
ultra fast, reflectorless surveying used to create topographic surveys,
preconstruction surveys of existing conditions, conformance surveys,
as-built surveys, heritage preservation surveys, quantity/volume
surveys, and to document construction accident sites. Collecting
500,000 points per second, 3D laser scanning enables CTS to
capture an exact moment in time, with a precision of millimeters. Our
modeling softwares fully integrate with REVIT and other BIM
software. We have found 3D scanning to be effective in providing
measurements for custom fit features and the development of as-
built documents.
Use of 3D design tools allows engineers and architects to vividly
demonstrate how a design works and allows a level of understanding
previously unknown in site work construction. Collaboration and
coordination with our MEP and architectural design partners is one of
the most important aspects of our work. CTS’ experience in the 3D/
BIM environment makes that effort much easier and yields a higher
quality design.
ABout our team
Firm Background
CTS was founded in 2012 to provide solutions to Architects,
Engineers, Contractors, Owners, and Facility Managers
(AECO+FM). We are laser focused on providing reality capture
technologies such as 3D Laser Scanning, Building Information
Modeling, and As-Built Solutions to deliver better building and
construction projects.
We support pre-development, pre-construction, commercial,
residential, and industrial environments to rapidly as-built facilities and
produce high-confidence, survey-grade as-built documents and
models. We verify millions of points a second, to millimeter accuracy,
in hours not days.
3D Laser Scanning Services
As-Built Surveys for BIM Verification
MEP System Surveys
Building Structural Surveys
Floor Flatness Exhibits
As-Built Surveys
Beam Deformation Surveys
Floor Thickness Surveys
Floor Flatness Surveys
Construction Documentation
Architectural Surveys
Topographic Surveys
Volume Analysis / Calculations
Drainage Surveys
Solar Panel Surveys
Deliverables
2D CAD Plans
3D CAD Plans / 3D Models
3D Revit Models
Building Information Models
Point Clouds
INDUSTRIES
• Architecture
• Engineering
• Construction
• Owner/Development
• Facility Management
P 408.703.1465
C 408.256.1837
leo@newcts.com
KEY CONTACT
Leo Castillo
PRESIDENT

3. CTS provided 3D Laser Scanning services for the development of a
1,850,000 sf, 68,500 seat sports arena.
We performed as-builts of pre and post pour concrete walls and decks
for flatness and plumb, and also by analyzing post pour scan data we
were also able to provide a deliverable verifying flatness and level of
concrete floors as well as the deflection in structural beams and pan
decking.
This became a “digital concrete core” to show the thickness of the
poured concrete deck and provide verification for the Owner, Sub and
General Contractor.
Location
Santa Clara, CA
General Contractor
Turner-Devcon
Size
68,500 seats
Completion Date
2014
Construction Cost
$1.4 Billion
Project Services
• As-Built Scanning
• 3D Laser Scanning
levi’s stadium

4. After years of searching for a new downtown location for the
Sacramento King’s Arena, the team worked with the City of
Sacramento to develop a new arena in the heart of the city. The new
arena is located on the site of a former major shopping mall in
downtown Sacramento.
CTS is providing 3D Laser Scanning Services for the project. Our
scanning crews worked with the general contractor, architect, and
structural engineer on scanning the exterior of the structure as pieces
were installed to maintain and compress schedule, as well as quality
assurance of pre-fabricated custom exterior panels manufactured from
the BIM.
Location
Sacrameno, CA
General Contractor
Turner Construction
Size
17,000 seats
Completion Date
2016 (expected)
Construction Cost
$477 Million
Project Services
• 3D Laser Scanning
• As-Built Documentation
King’s Downtown Arena

5. CTS provided 3D Laser Scanning and Building Information Modeling
services for significant improvements to the center.
Improvements included: new contiguous exhibition space; add 140,000
sf of exhibition space; 28,000 additional sf of meeting space, 87,000 sf
of multipurpose space, and 178,000 sf of Moscone support space.
Our crews were able to to provide highly accurate interior scans to
support the facility management group, project architect, mechanical
engineer, electrical engineer, and plumbing engineer.
Location
San Francisco, CA
General Contractor
NA
Size
433,000 Square Feet
Completion Date
2013
Construction Cost
NA
Project Services
• 3D Laser Scanning
• Building Information Modeling
Moscone Center

6. CTS provided high definition survey and 3D laser scanning to correct
seismic deficiencies in buildings 1, 6 and 8, replace building 12 with a
new research building (67,500 to 82,500 sf), addition of a new 250
space parking structure, addition of 25,000 sf modular building and the
renovation of 12,000 sf of space at various sites on the campus.
The laser scanning consisted of a 3D building document (as-built
drawings) for Buildings 1, 6 and 8 and included a 3D model in Revit
2012.
Engineering services by our parent company SANDIS also included:
design narrative for civil related site utilities (sanitary sewer, storm drain
and water); fire hydrant testing for static and residual pressure; storm
water management control plan; demolition plan; grading and drainage
plans; utility plan; erosion control plan; and technical specifications.
Services for the 25,000 modular building included: demolition plan;
grading and drainage plan; utility plan; erosion control plan; storm
water management plan; and technical specifications.
Location
San Francisco, CA
General Contractor
NA
Size
200,000+ Square Feet
Completion Date
2015
Construction Cost
$1 Million+
Project Services
• 3D Laser Scanning
• Building Information Modeling
VA San Francisco Medical Center

7. Location
Cupertino, CA
General Contractor
Rudolph & Sletten/Holder
Construction
Size
176 Acres + 1.5 Miles of Freeway
Completion Date
2018 (expected)
Construction Cost
$4 Billion
Project Services
• 3D Laser Scanning
• Building Information Modeling
• Clash Detection
APPLE CAMPUS 2
CTS is working with Apple, Rudolph & Sletten, Holder Construction,
Foster + Partners, and a variety of engineering consultants in order to
provide daily and on-going 3D laser scanning and as-built BIM
services for the new Apple Campus 2 during construction.
CTS has also been selected as the Siteworks BIM management
consultant to manage contractors, trades and partners weekly
submittal of as-built BIM data.
As part of the safety contract, CTS designed the system of as-built
data submittal through an online portal, monitors and releases weekly
progress models, links model objects to as-built data submittal forms
for document control purposes, and trains construction staff to use
the model for safe surface and subsurface digging procedure.
The complexity of new utilities needed to service the 176 acre site
CTS has also provided modeling and clash detection services of utility
systems. Our team takes the data from each civil drawing and imports
it into a 3D model where utility conflicts can be seen and resolved
before construction begins.

8. 3D Scanning Experience
Bing Concert Hall
Stanford University
CTS provided High definition survey/3D laser scan for the development of
a 112,000 sf, 844 seat performing arts facility. Scanning was conducted
to ensure a precise measurement for the installation of the ceiling
“clips and sails.” Deliverables included: raw scan and image data, scan
metadata, project metadata, control information, registration information
for all raw scans (tied to the site coordinate system), digital images of
scanning scenes, registered scan data, and point clouds.
Centennial Recreation Center Photovoltaic Solar Power Generation
Systems
Morgan Hill
CTS provided a rooftop topographic survey and 3D laser scan for the
installation of a solar photovoltaic system. The intent of the system is to
provided needed energy to operate the 54,000 sf that does not exceed
the facilities energy requirements.
UC Berkeley Boalt Hall Seat Wall
Berkeley
High definition survey/3D laser scan to aid in custom seat wall bench
manufacturing.
DeAnza High School Replacement Campus
Richmond
CTS provided 3D laser scanning of the building canopy and panels.
Services included scan of the curved canopies for Buildings 1, 2, 3 and 9;
scan of the straight canopies for Buildings 1, 4, 5, 6, and 7; and a scan of
the crown canopies on Building 8. We provided 2D (Buildings 1-7, 9) and
3D (Building 8) CAD plans and pdf’s documents showing plan views of the
existing conditions for use in determining proper panel manufacture.
High Rise Oakland
High definition survey/3D laser scan for structural performance and
concrete desk analysis for confidential client/project.
Pier 41
San Francisco
High definition survey/3D laser scan to develop as-built drawings for
existing building.
SLAC
Menlo Park
High definition survey/3D laser scan for seismic improvements for the
tunnel.

9. Additional 3D Scanning Projects
• Mission College, Santa Clara
• 451 University Avenue, Palo Alto
• 375 Beale Street, San Francisco
• 1995 N. 1st Street, San Jose
• Bishop Ranch, Concord and San Ramon
• Downtown Placemaking, Morgan Hill
• Uvas Reservoir, Santa Clara County
• 100 California Street
• Google, Mountain View
• Berkeley Planters
• Stanford GSB
• SLAC, Menlo Park
• City College, San Francisco
• Santa Clara University, Santa Clara
• Benches at Cal
• Kaiser Permanente, Oakland
• VA, Sacramento
• Berryessa Creek, Santa Clara County
• Villa St, Mountain View
• Terremark Regional Street Retail
• Recreation Center, Morgan Hill
• Anderson Dam Spillway, Santa Clara County
• Pittsburg High School
• Lucile Packard Children’s Hospital Walls, Palo Alto
• Livermore Airport, Livermore
• Steven’s Creek Development, San Jose
• Bay Street, Emeryville
• Kaiser Permanente, Redwood City
• El Camino Hospital Data Rooms, Mountain View
• Viveka Scooner Modeling
• BART, Oakland
• Bair Island Road, Redwood City
• SF Int’l Airport Replace Air Traffic Control Tower
• Motorola Building 1st Floor
• On-Call Surveying, San Francisco
• Crow Canyon Commons, San Ramon
• San Jose Evergreen College Gullo Student Center, San Jose
• Mermaid Inn
• Power Substation
• Albrae Street, Fremont
• Forrest Avenue Development, Los Gatos
• Jasper Ridge, Woodside
• Stanford Stadium LED, Palo Alto
• De Anza Homestead
• 2901 Broadway, San Francisco
• Kaiser Permanente, San Leandro
• Sausalito City Hall, Sausalito
3D Scanning Experience

10. • AC2, Cupertino
• Northrup Gruman Property, Sunnyvale
• 451 University Avenue, Palo Alto
• 81 Shore View Avenue, San Francisco
• Stanford Stadium, Palo Alto
• Tesla, Fremont
• Martial Cottle County Park, San Jose
• Santa Clara University, Santa Clara
• VA Hospital, Menlo Park
• Pete’s Harbor/Blu Harbor, Redwood City
• Google Shorebird Campus Master Plan, Mountain View
• Huff Gravel Parking Lot, Mountain View
• Independence High School, San Jose
• Shorebird Site 1, Mountain View
• Shorebird Site 2, Mountain View
Building information modeling
VA Medical Center
San Francisco
High definition survey/3D laser scan to correct seismic deficiencies in
buildings 1, 6 and 8, replace building 12 with a new research building,
addition of a new 250 space parking structure, addition of modular
building and the renovation of 12,000 sf of space at various sites on the
campus. Scanning services were provided to create an accurate as-built
condition record to assist in the complete renovation of these buildings,
provide a record of utility locations for repair, maintenance and
alterations. Deliverables included: raw scan and image data, scan
metadata, project metadata, control information, registration information
for all raw scans
(tied to the site coordinate system), digital images of scanning scenes,
registered scan data, and point clouds. Deliverable also included a 3D
model at a level of detail of 300.
3159 El Camino Real
Palo Alto, CA
CTS provided surveying and engineering services for a four-story,
74,122 sf office building (includes 48,860 sf of residential space for 48
rental apartment units and 31,262 sf of commercial office, retail
and restaurant space); retention of an existing one-story, 6,616 sf of
commercial space as well as the existing parking structure.
Surveying services included the preparation of a topographic survey.
Engineering services included: pre-design dry utility coordination (site dry
utility layout for planning and space allocation purposes); assistance in
preparation of the Major Architectural Review Board Submittal package;
grading plan; storm, sanitary sewer and water plans; LID/C3 storm water
management plan; technical specifications; fire design plan (pipe sizing,
flow analysis, fire system layout including fire hydrants, FDCs and PIVs for
bidding purposes for site work only); and construction notes and details.
Additional Modeling Project

11. P 408.703.1465
C 408.256.1837
leo@newcts.com
Leo Castillo
PRESIDENT

12. BIM GROUP ScanningGROUP
CTSPROJECT
Organization
Chart
CTS#316064 | LRC | 2016.10.24
SURVEYMANAGER
ANDREWCHAFER,PLS
BIMPM
leocastillo
BIM
TechnicianS
BIM
Coordinator
JESSEGUTIERREZ
BIMSpecialist
daviskantor
HDSPM
Scottcurry
LaserScan
TechnicianS
LaserScan
Coordinator
leeroyduarte
LaserScan
Specialist
robohata

13. 316064 Google Moffett Place Building 3
Page 1 of 1Exported on October 24, 2016 11:51:50 AM PDT