3. 03
About MHS Radiators
MHS Radiators is an acknowledged leader in radiator design and technology. We are
an independently owned company that has has gone from strength to strength over the
last 30 years. Based in Basildon, Essex, we have an unrivalled portfolio, which includes a
range of decorative and LST radiators suitable for a multitude of specification needs.
Whether you are an architect, consulting
engineer or specifier, mechanical contractor or
installer, local authority or commercial interior
designer, our products are ideal for your
needs. From decorative and LST radiators to
ceiling panels and towel rails, we help you
create a comfortable, healthy and energy-
efficient application.
• Huge selection of stock
Our warehouse holds a vast stock of our key
product lines, so when customers need our
radiators, delivery is always swift and prompt
• Commitment to quality
We only select products from manufacturers
adhering to our stringent guidelines, including
ISO 9001 and ISO 14001
• Reliability
Our radiators combine exceptional design with
value for money and are guaranteed to last, as
reflected by our renowned product warranties
• Suitable for a range of applications
MHS Radiators can be used in residential,
commercial, retail, healthcare, education and other
public sector properties
The MHS promise
4. 04
Case Studies
Products in action
A combination of bespoke Sunline
radiant ceiling panels and Matrix
radiators from MHS has been
installed at West Bridgford Library in
Nottingham. The recently renovated
building has benefited from a
modern, two-storey extension to the
rear of its existing front façade, as
well as a new Young People's Centre
and a Registrar’s Office, all as part of
a £5.3m redevelopment project.
41 radiators from MHS have
been installed at Hurlingham &
Chelsea Secondary School in
London. 38 Matrix Horizontal,
Vertical and Convector radiators,
as well as three Slimguard LST
models were fitted by Neilcott
Construction, as part of a state-
of-the-art refurbishment of the
building, which is located in the
south of Fulham. The radiators
were fitted in many of the key
parts of the building, including
the library, training room,
reception and lobby.
A novel approach to heating
Top of the class
5. 05
Case Studies
Products in action
53 Ionic cast iron radiators
from MHS have been fitted
as part of the multimillion
pound restoration of
Sewerby Hall in East Riding,
Yorkshire. The radiators were
installed at the Grade 1 listed
historic country house prior
to it reopening to the public.
Rewriting
history
16 Sunline radiant ceiling panels
from MHS have been installed in
the main sports hall at Westcroft
Leisure Centre in the London
Borough of Sutton, as part of an
extensive £11m refurbishment
project. The sports and fitness
complex called upon the services
of Method Consulting LLP to
specify the most practical and
energy efficient way of heating
the new facilities.
Good sports
6. 06
Case Studies
Products in action
Over 230 Ionic cast iron radiators from
MHS have been installed as part of the
refurbishment of Wakefield Town Hall, West
Yorkshire. The historic Victorian building is
Grade I listed by English Heritage, which
meant some radiators have had heat
shields and extended brackets fitted to
protect the oak panelling on the walls. MHS
Chartwell valves were also used as part of
the installation.
An iconic
refurbishment
Over 800 Kompakt Panel and Aeroguard
radiators from MHS have been installed at the
newly constructed R4 (Rubicon Court) and R5
buildings in central London. The new tower
blocks will provide private accommodation,
along with social housing as part of the Kings
Cross redevelopment programme.
High quality high rise
7. 07
Case Studies
Products in action
170 Safeguard FD and Slimguard
LST from MHS have been installed
at St Joseph’s Convent and
Residential Care Home in
Littlehampton, Sussex. The low
surface temperature radiators
were supplied as part of the
replacement of a 1960s heating
system, which had reached the
end of its maintainable life. None
of the original heat emitters were
LST type, which meant they were
not suitable for use in the building.
19 cast iron Ionic radiators from
MHS have been installed at
Bentley Priory in Stanmore,
Middlesex. The products were
fitted as part of a conversion of
the historic 18th century
mansion house and its
adjoining buildings, into a
variety of 1, 2 and 3-bedroom
apartments, duplexes and villas.
Cast iron
elegance
Safety first with LST upgrades
8. 08
Kompakt
Overview
The Kompakt radiator is made from 1.15mm
steel and finished in RAL 9016 Traffic White
only. Supplied complete with wall brackets,
plug and air vent, side panels and top grille as
standard, the Kompakt radiator has a 10 bar
maximum working pressure (13 bar test
pressure) with 4 x ½” bsp-f connections. The
MHS Kompakt carries a 10-year guarantee
against manufacturing defects.
Features
• Types - 11, 21, 22 & 33
• Material - Steel (1.15mm)
• Finish - RAL 9016 Traffic White
• Heights - 300-900mm
• Lengths - 400-3000mm
• Sizes - 144 per Type
• Outputs - 210-9891 watts
• Pressure - 10 bar (13 bar test)
• Warranty - 10 years
Kompakt
Type 11
Kompakt
Type 21
Kompakt
Type 33
Kompakt
Type 22
All dimensions in mm
45
36,5
14
51
81,5
Bottom view Kompakt Type 11
70-90
36,5
14
73
107-127
Bottom view Kompakt Type 21
87-107
53
14
106
140-160
Bottom view Kompakt Type 22
70-90
36,5
14
165
199-219
Bottom view Kompakt Type 33
9. SECTIONONE
09
Kompakt
Technical
SECTIONONE
Visit www.mhsradiators.co.uk for full details
Kompakt - Type 11
Height (mm)
300 400 500 600 700 900
Watts/metre ∆t 50ºC 524 666 802 934 1063 1312
Weight kg/metre 8.98 11.53 14.05 16.60 19.16 24.23
Water cont. litres/metre 2.19 2.50 2.84 3.19 3.57 4.40
Kompakt - Type 21
Height (mm)
300 400 500 600 700 900
Watts/metre ∆t 50ºC 755 953 1141 1322 1499 1841
Weight kg/metre 13.92 18.0 22.09 26.14 29.59 38.06
Water cont. litres/metre 3.55 4.48 5.38 6.27 7.13 8.79
Kompakt - Type 22
Height (mm)
300 400 500 600 700 900
Watts/metre ∆t 50ºC 942 1202 1449 1683 1907 2326
Weight kg/metre 15.65 20.49 25.20 30.04 34.24 44.50
Water cont. litres/metre 3.57 4.48 5.38 6.26 7.12 8.80
Kompakt - Type 33
Height (mm)
300 400 500 600 700 900
Watts/metre ∆t 50ºC 1334 1700 2048 2379 2696 3297
Weight kg/metre 22.87 30.03 37.22 44.43 50.97 65.95
Water cont. litres/metre 5.29 6.71 8.07 9.39 10.65 13.02
All types and all heights are available in the following lengths (mm):
400,500,600,700,800,900,1000,1100,1200,1300,1400,1500,1600,1700,1800,1900,2000,2200,2400,2500,2600,2700,2800 and 3000
10. 10
The advantages of
6 tapping radiators
Floor fixing
This allows each
radiator to be
completely
freestanding and
floor mounted
with no wall ties,
providing a solid
and secure
foundation.
Fast and flexible fit
Having 6 connection points as standard provides
easy installation and flexibility in terms of TRV
location, which is particularly beneficial in new builds
or retrofit projects. These connections allow for
pipework installation and finishing at first fix, long
before radiator size actually needs to be determined,
saving on time and labour.
Central connections also enable radiators to be
mounted quickly and easily at second fix, while their
location is not dependent on their length; this means
pipes can be laid (centrally in front of a window, for
example) without the need for preplanning the size
or style of a radiator from the range. This added
flexibility allows the radiators to be used in new
builds and retrofit projects, while allowing for any
investment in building materials to be spread
between first and second fix.
All 6 tapping radiators from MHS are available in
horizontal orientations. Horizontal models have two
½" bsp outward connections on each side plus two
¾" male (euro cone) downward facing central
connections on the bottom. These euro cone
connections are factory pre-sealed with metal caps.
All 6 tapping radiators from MHS are fully
compliant with the requirements of Criterion 16 of
the Lifetime Homes Standard, while still providing
regulated levels of warmth and maintaining a
stylish appearance.
Constructed from 1.15mm steel (Planatherm
2mm), these radiators are strong, robust and
powder-coated in RAL 9016. There are factory-
fitted side panels and top grilles on all models,
leaving a clean and smooth finish.
Factory-fitted side
panels and top
grille on all models,
leaving a clean,
smooth finish.
11. 11
Left or right side TRV position
The TRV head on all 6 tapping radiators can be mounted
on either the left or right side, thanks to the innovative
bracketing system used (on all models except Type 11).
Kompakt Plan and Kompakt Line radiators are available
with TRV head on the right side only.
Paint finish
All radiators are cleaned and pre-treated prior to primer
coating, before being powder-coated in RAL 9016
Traffic White.
Compatibility
6 tapping radiators are compatible with: Gas, oil and
electric boilers, ground source and air source heat
pumps and biomass.
Simple to install - pre-plumbed
All radiators are delivered ready for mounting, and
include pre-assembled TRV valve inserts for quick and
simple installation. All products are supplied as complete
packages, including all the necessary mounting brackets,
blind plug, radiator drain and deaerator.
Connect with
Variocon
All radiators in the horizontal
Centric Kompakt, Kompakt
Plan and Kompakt Line
range can utilise the MHS
Variocon valve set. This can
swivel for angled, through
the wall connections or can
simply come up from the
floor for straight
connections – making
specification/installation
considerably easier.
Fully compliant with Criterion 16 of the
Lifetime Homes Standard
This requirement, in accordance with Document M,
2004 (Part M) stipulates that switches, socket outlets
and other equipment in habitable rooms are installed at
appropriate heights between 450mm and 1,200mm
from finished floor level. Any 'service controls' (such as
TRVs) should also be at least 300mm from any internal
room corner. This eliminates any need for reaching or
bending down to adjust the settings, and ensures
controls remain easily within the reach of wheelchair
users and the elderly.
Quality tested
All 6 tapping radiators are manufactured and tested to
BS EN 442. Every radiator carries the CE mark which
certifies independent
approval of heat output
and verifies production
under a quality system to
BS EN ISO 9001.
Each 6 tapping radiator is available with a Declaration
of Performance (DoP) via www.mhsradiators.co.uk and
carry a 10-year warranty against defects caused by
faulty materials or manufacture.
TRV insert
Every radiator is equipped
with a pre-set valve insert,
which enhances the
efficiency of the system
and reduces energy
consumption.
Designed and
manufactured
to the latest standards
SECTIONONE
Variocon valve
12. 12
Centric Kompakt
Overview
The Centric Kompakt radiator is
manufactured from 1.15mm steel and
available in powder coat RAL 9016 Traffic
White finish only. Radiators are supplied
complete with side panels, top grille, wall
brackets, plugs and air vent (TRV insert
included with all horizontal models). Floor
brackets are available at additional cost for
all horizontal models (excluding the Type 11).
The Centric Kompakt has a maximum
working pressure of 10 bar (max test 13 bar).
There are 4 x ½" bsp-f connections complete
with integrated pre-plumbing to install
underside, with Variocon valve ¾” euro cone
connections on the horizontal models only
(valve available at additional cost). The
Centric Kompakt carries a 10-year guarantee
against manufacturing defects.
Features
• Types - 11, 21, 22 & 33
• Material - Steel (1.15mm)
• Finish - RAL 9016 Traffic White
• Heights - 200-900mm
• Lengths - 400-3000mm
• Sizes - 423
• Outputs - 210-7137 watts
• Pressure - 10 bar (13 bar test)
• Warranty - 10 years
45
36,5
14
51
81,5
50
Bottom view Centric Type 11
70-90
36,5
14
73
107-127
66-86
Bottom view Centric Type 21
87-107
53
14
106
140-160
66-86
Bottom view Centric Type 22
70-90
36,5
14
165
199-219
66-86
Bottom view Centric Type 33
14. 14
Kompakt Plan
Overview
The Kompakt Plan radiator is manufactured from
1.15mm steel with a 1mm thick flat front panel and is
available in powder coat RAL 9016 Traffic White finish
only. Supplied complete with side panels, top grille,
wall brackets, plugs and air vent (TRV insert included
with all horizontal models), the Kompakt Plan has a
maximum working pressure of 10 bar (max test 13
bar). There are 4 x ½" bsp-f connections complete
with integrated pre-plumbing to install underside,
with Variocon valve ¾” euro cone connections on the
horizontal models only (valve available at additional
cost). The Kompakt Plan carries a 10-year guarantee
against manufacturing defects.
Features
• Types - 11, 21, 22 & 33
• Material - Steel (1.15mm)
• Finish - RAL 9016 Traffic White
• Heights - 300-900mm
• Lengths - 400-3000mm
• Sizes - 176
• Outputs - 231-4563 watts
• Pressure - 10 bar (13 bar test)
• Warranty - 10 years
Kompakt Plan
Type11
Kompakt Plan
Type 21
Kompakt Plan
Type 22
Kompakt Plan
Type 33
70-90
36,5
14
74,5
107-127
66-86
Bottom view Kompakt Plan Type 21
87-107
53
14
107,5
140-160
66-86
Bottom view Kompakt Plan Type 22
70-90
36,5
14
166,5
199-219
66-86
Bottom view Kompakt Plan Type 33
61.5
36.5
14
69
98
66
Bottom view Kompakt Plan Type 11
16. 16
Kompakt Vertical
Overview
Features
• Types - 21 & 22
• Material - Steel (1.15mm)
• Finish - RAL 9016 Traffic White
• Heights - 1600-2200mm
• Widths - 400, 500, 600, 700 & 800mm
• Models - 40 per style
• Outputs - 1047-3590 watts
• Pressure - 10 bar (13 bar test)
• Warranty - 10 years
Kompakt
Plan
Line
The Kompakt Vertical radiator is made from 1.15mm steel and finished in RAL 9016 Traffic
White only. Supplied complete with wall brackets, plug and air vent and side panels as
standard, the Kompakt radiator has a 10 bar maximum working pressure (13 bar test
pressure) with 4 x ½” bsp-f connections. The MHS Kompakt carries a 10-year guarantee
against manufacturing defects.
MHS Kompakt Plan Vertical specification
The Kompakt Plan Vertical radiator is as the Kompakt Vertical with 1mm thick flat front panel.
MHS Kompakt Line Vertical specification
The Kompakt Line Vertical radiator is as the Kompakt Vertical with a 1mm thick decorative
lined front panel.
101
73
64
78
106
134,5
81,5
78
L - 62
50
1/2” 3/4” 3/4” 1/2”
L - 206
L - 62
50
1/2” 3/4” 3/4” 1/2”
L - 206
H
LL
H
H
L
Kompakt Vertical
Compact
Kompakt Vertical
Plan
Kompakt Vertical
Line
18. 18
Kompakt Line
Overview
Features
• Types - 11, 21, 22 & 33
• Material - Steel (1.15mm)
• Finish - RAL 9016 Traffic White
• Heights - 300-900mm
• Lengths - 400-3000mm
• Sizes - 172 models
• Outputs - 176-4563 watts
• Pressure - 10 bar (13 bar test)
• Warranty - 10 years
Kompakt Line
Type 11
Kompakt Line
Type 21
Kompakt Line
Type 22
Kompakt Line
Type 33
70-90
36,5
14
74,5
107-127
66-86
Bottom view Kompakt Line Type 21
87-107
53
14
107,5
140-160
66-86
Bottom view Kompakt Line Type 22
70-90
36,5
14
166,5
199-219
66-86
Bottom view Kompakt Line Type 33
61.5
36.5
14
69
98
66
Bottom view Kompakt Line Type 11
The Kompakt Line radiator is manufactured from
1.15mm steel with a 1mm thick decorative lined front
panel. Finished in powder coat RAL 9016 Traffic White
only, the radiator is supplied with side panels, top
grille, wall brackets, plugs and air vent (TRV insert
supplied with all horizontal models). The Kompakt
Line has a maximum working pressure of 10 bar (max
test 13 bar). There are 4 x ½" bsp-f connections
complete with integrated pre-plumbing to install
underside, with Variocon valve ¾” euro cone
connections for the horizontal models only (valve
available at additional cost). The Kompakt Line carries
a 10-year guarantee against manufacturing defects.
20. 20
Planatherm
Overview
The Planatherm is made from steel with a flat 2.00mm
front waterway panel and 1.10mm thick rear panel, as
well as fitted side panels and linea top grille, plus
valve body insert, secure fit wall mounting brackets
and 8 connections. Finished in fine textured RAL 9016
Traffic White, the Planatherm radiator has a maximum
working pressure of 6 bar (max test pressure 7.8 bar)
and carries a 10-year guarantee against
manufacturing defects.
Features
• Types - 21, 22 & 33
• Material - Steel (2mm front waterway panel
with 1.10mm thick rear panel)
• Finish - Fine textured RAL 9016 Traffic White
• Heights - 300-900mm
• Lengths - 400-3000mm
• Sizes - 143
• Outputs - 366-5146 watts
• Pressure - 6 bar (7.8 bar test)
• Warranty - 10 years
Connect with Variocon
The Variocon valve arrangement provides full
flexibility when using the underside connections.
Supplied with 15mm copper connections
(standard) or with ½" bsp steel pipe connectors if
required. Note: Offsets pipework centres 25mm
to the left of radiator connections.
White TRV
head:
Part no.
ZXFL- 01
Chrome
TRV head:
Part no.
ZXFL- 02
103
70
1
136
86
197
70
Side Type 21 Type 22 Type 33
69
34
116 116 1
34
102
1
116 116
1
Type 22
34
163
116 116
Type 33
Top Type 21
1/2”
1/2” 1/2”1/2” 1/2” 1/2”
3/4” 3/4” 3/4” 3/4”
3/4” 3/4” 3/4”3/4”
3
50 50 31 50 31 31
L-232
50 5050
L-232 L-232
29
*66 *66 *66
29 29
22. 22
Monoplan Horizontal
Overview
The Monoplan Horizontal Standard Range is made
from steel (2mm front panel and 1.25mm
internal panel) and finished in RAL 9016 Traffic White
as standard, with other RAL colours available at
additional cost. It has a 6 bar maximum working
pressure (mwp) tested to 7.8 bar, while a high
pressure version (10 bar mwp 13 bar test) is also
available at additional cost. The Monoplan radiator
has ½” bsp-f connections, with horizontal (BBOE
B1D1 detail) as standard unless otherwise specified.
Alternative configurations are also available; these
must be specified with each order.
The Monoplan Comfort is available for the Horizontal range
for DR to TK3 models. With a top grille and welded on side
panels making the radiator flat to all surfaces, the
Monoplan Comfort is made from steel and finished in RAL
9016 Traffic White as standard, with other RAL colours
available at additional cost. It has a 6 bar maximum working
pressure (mwp) tested to 7.8 bar, while a high pressure
version (10 bar mwp, 13 bar test) is also available at
additional cost. The Monoplan Comfort has ½” bsp-f BBOE
B1D1 detail as standard unless shown otherwise.
Alternative configurations are also available; these must be
specified with each order.
Features
• Types - ER (10), EK (11), DR (20), C (21),
DK (22) T (30), TK3 (33),
• Material - Steel (2mm front panel)
• Finish - Standard RAL 9016 Traffic White with
other colours available on request
• Heights - 220-950mm
• Lengths - 400-4000mm
• Sizes - 1813
• Outputs - 111.2-14756 watts
• Standard working pressure 6 bar (7.8 bar test)
10 bar working pressure (13 bar test on request)
• Warranty - 5 years
32 43
95 95 95 166 166 L 5 L 5
47.5 47.5
Front Front H
H1
H
H1
H1= H - 35mmH1= H - 30mm
X
70/150/250
25
L = 600-2000
200 200a1
L = 2100-3500
200 200a1 a2
70/150/250
L = 3600-4000
200 200a1 a2 a3
L = 400-500
100 100a1
Types ER (10)
& EK (11)
Types DR (20)
to TK3 (33)
Type
ER (10)
Type
EK (11)
Type
DR (20)
Type
C (21)
Type
DK (22)
Type
T (30)
Type
TK3 (33)
Monoplan
Comfort
Monoplan
Standard Single
23. 23
Monoplan Horizontal
Technical
SECTIONONE
Type ER (10) - Depth 32mm
per linear metre info
Height (mm) 220 320 420 520 620 720 950
Watts/metre ∆t 50ºC 278 375 466 560 651 749 974
Weight kg/metre 7.5 10.0 14.0 17.4 20.4 22.9 26.8
Water cont. litres/metre 1.7 1.8 2.1 2.3 2.5 2.8 3.2
Type EK (11) - Depth 43mm
per linear metre info
220 320 420 520 620 720 950
371 508 665 824 971 1108 1387
8.6 11.9 15.6 19.2 23.0 26.7 35.6
1.7 1.8 2.1 2.3 2.5 2.8 3.2
Type DR (20) - Depth 95mm
per linear metre info
Height (mm) 220 320 420 520 620 720 950
Watts/metre ∆t 50ºC 468 624 784 941 1095 1248 1592
Weight kg/metre 14.3 19.6 24.9 30.3 35.6 40.9 53.2
Water cont. litres/metre 2.4 2.8 3.5 4.0 4.5 4.9 5.7
Type C (21) - Depth 95mm
per linear metre info
220 320 420 520 620 720 950
561 785 1016 1245 1459 1657 2055
15.4 21.7 28.1 34.4 40.8 47.2 61.9
2.4 2.8 3.5 4.0 4.5 4.9 5.7
Type DK (22) - Depth 95mm
per linear metre info
Height (mm) 220 320 420 520 620 720 950
Watts/metre ∆t 50ºC 674 985 1269 1546 1806 2047 2533
Weight kg/metre 16.5 23.8 31.4 38.8 46.1 53.3 69.2
Water cont. litres/metre 2.4 2.8 3.5 4.0 4.5 4.9 5.7
Type T (30) - Depth 166mm
per linear metre info
220 320 420 520 620 720 950
668 899 1124 1346 1564 1778 2251
21.7 30.1 38.1 46.0 54.0 61.9 80.0
3.8 4.5 5.2 5.9 6.6 7.3 8.9
Type TK3 (33) - Depth 166mm
per linear metre info
Height (mm) 220 320 420 520 620 720 950
Watts/metre ∆t 50ºC 987 1439 1849 2252 2629 2980 3689
Weight kg/metre 25.5 36.3 46.6 57.1 67.8 78.8 104.7
Water cont. litres/metre 3.8 4.5 5.2 5.9 6.6 7.3 8.9
All types and all heights are available in the
following lengths (mm):
400, 500, 600, 700, 800, 900, 1000, 1100, 1200,
1300, 1400, 1500, 1600, 1700, 1800, 1900, 2000,
2100, 2200, 2300, 2400, 2500, 2600, 2700, 2800,
2900, 3000, 3100, 3200, 3300, 3400, 3500, 3600,
3700, 3800, 3900 & 4000
A1 B1
C1 B1A1 D1 C1 D1
D1 B1B1 D1
A1 C1
D1B1
A1 C1
D1B1
A1 C1
D1B1
A1 C1
D1B1
A1 C1
D1B1
A1 C1
D1B1
Default connection B1
D1 (BBOE) flow left
return right on
horizontal models and
B5 D5 on vertical
models (unless
specified otherwise)
Visit www.mhsradiators.co.uk for full details
Horizontal
connections
Monoplan
Standard Double
24. 24
Monoplan Vertical
Overview
The Monoplan Vertical Range is made from steel
(2mm front panel and 1.25mm internal panel) and
finished in RAL 9016 Traffic White as standard, with
other RAL colours available at additional cost. 6 bar
maximum working pressure (mwp) tested to 7.8 bar.
A high pressure version (10 bar mwp, 13 bar test) also
available at additional cost. The Monoplan radiator
has ½” bsp-f connections (B5D5 detail) as standard
unless shown otherwise. Alternative configurations are
also available; these must be specified with each
order. The Monoplan carries a 5-year guarantee
against manufacturing defects.
Features
• Types - ER (10), EK (11), DR (20), DK (22)
• Material - Steel (2mm front panel)
• Finish - Standard RAL 9016 Traffic White with other
colours available on request
• Heights - 1200-3800mm
• Widths - 320-950mm
• Sizes - 648
• Outputs - 405.6-3332.6 watts
• Standard working pressure 6 bar (7.8 bar test)
10 bar working pressure (13 bar test on request)
• Warranty - 5 years
Dimensional
data
Type ER (10)
& EK (11)
Type DR (20)
& DK (22)
5
5
H
W
W1
W
W1
H
W1= W - 30mm W1= W - 35mm
100 100
200175
2525
2525
Height1200-2000
Height2100-3800
100 100
100
Width
320-950
Width
320-950
32 43
95 95
Type
ER (10)
Type
EK (11)
Type
DR (20)
Type
DK (22)
26. 26
Viola Horizontal
Overview
The Viola Horizontal is made from 1.5mm steel
and supplied in RAL 9016 Traffic White as
standard, with other finishes available at
additional cost. It has a maximum working
pressure of 4 bar (5.2 bar test) as standard, with
10 bar working (13 bar test) available at additional
cost. Complete with 4 wall brackets, air vent and
top grille as standard, the Viola Horizontal (unless
otherwise specified) will be supplied with ½"
bsp-f connections (side connection detail 2 and 7
BBOE). See separate Viola sales brochure for
additional connection details available. The Viola
Horizontal radiator carries a 10-year guarantee
against manufacturing defects.
Features
• Types - 10, 11, 20, 21 & 22
• Material - Steel (1.5mm flat oval tubes)
• Finish - Standard RAL 9016 Traffic White
with other colours available
• Heights - 288-868mm
• Lengths - 500-3000mm
• Sizes - 762
• Outputs - 167-5976 watts
• Pressure - 4 bar (5.2 bar test)
• Pressure - 10 bar (13 bar test) on request
• Warranty - 10 years
L-152
48
76 76
L-152
62
7676
L-152
62
76 76
L-152 7676
L-15276 76
52
H1-RO
H1L1-RO
H2-RO
H2L1-RO
H2L2-RO
1026450
1349581
65H-145min.
70
min.
70
80
65H-145min.
70
80
L
76
H
H-14387
76
H1-RO
H1L1-RO
H2-RO
H2L1-RO H2L2-RO
27. 27
Viola Horizontal
Technical
SECTIONONE
Height
(mm)
Type H1-RO (10)
per linear metre info
Watts
∆t 50ºC
Weight
kg
Water
cont. litres
288 334 7.78 2.22
360 409 9.87 2.80
433 485 12.07 3.45
505 561 14.23 4.10
578 639 16.43 4.76
650 716 18.60 5.40
723 796 20.62 5.98
795 876 22.60 6.54
868 959 24.60 7.10
Type H1L1-RO (11)
per linear metre info
Watts
∆t 50ºC
Weight
kg
Water
cont. litres
544 11.02 2.37
644 14.00 3.00
740 16.64 3.60
830 19.25 4.20
918 21.89 4.80
1001 24.50 5.40
1082 27.21 5.97
1159 29.89 6.53
1235 32.60 7.10
Height
(mm)
Type H2-RO (20)
per linear metre info
Watts
∆t 50ºC
Weight
kg
Water
cont. litres
288 567 15.14 4.22
360 696 19.00 5.40
433 824 22.65 6.51
505 949 26.25 7.60
578 1074 29.90 8.71
650 1195 33.50 9.80
723 1317 37.22 10.87
795 1436 40.88 11.93
868 1556 44.60 13.00
Type H2L1-RO (21)
per linear metre info
Watts
∆t 50ºC
Weight
kg
Water
cont. litres
794 17.38 4.26
949 21.50 5.30
1100 25.35 6.43
1245 29.15 7.55
1387 33.00 8.68
1524 36.80 9.80
1660 40.42 10.87
1792 43.98 11.93
1923 47.60 13.00
Type H2L2-RO (22)
per linear metre info
Watts
∆t 50ºC
Weight
kg
Water
cont. litres
976 22.14 4.26
1167 27.60 5.30
1350 32.35 6.43
1521 37.05 7.55
1686 41.80 8.68
1841 46.50 9.80
1992 51.19 10.87
2134 55.81 11.93
2273 60.50 13.00
Except where noted, all types and all heights are available in the following lengths (mm):
500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1600, 1800, 2000, 2200, 2400, 2600, 2800*, 3000*
*Note: Type H2L2-RO 795mm high is not available in length 3000mm
Type H2L2-RO 868mm high is not available in length 2800mm & 3000mm
7
6
2 7
6
2
27 27
Standard default connections
unless otherwise specified
Visit www.mhsradiators.co.uk for full details
28. 28
Viola Vertical
Overview
The Viola Vertical is made from 1.5mm steel and supplied in
RAL 9016 Traffic White as standard, with other finishes
available at additional cost. It has a maximum working
pressure of 4 bar (5.2 bar test) as standard, with 10 bar
working (13 bar test) available at additional cost. Complete
with 4 wall brackets and air vent, the Viola Vertical (unless
otherwise specified) will be supplied with ½" bsp-f
connections (downward facing connections detail 1 and 8).
See separate Viola sales brochure for additional connection
details available. The Viola Vertical radiator carries a 10-year
guarantee against manufacturing defects.
Features
• Types - 10, 11 & 20
• Material - Steel (1.5mm flat oval tubes)
• Finish - Standard RAL 9016 Traffic White
with other colours available
• Heights - 1200-2400mm
• Widths - 215-1013mm
• Sizes - 231
• Outputs - 300-3737 watts
• Pressure - 4 bar (5.2 bar test)
• Pressure - 10 bar (13 bar test) on request
• Warranty - 10 years
83,5H-15268,5
83,5H-15268,5
9581
6450
H
L
R1
21,5R221,5
H
L
58,5
50
217
1/2”1/2”
1/2” 1/2”
H
R1
L
72,5 72,5
48
L - 145
48
L -14572,5 72,5
62
72,5 72,5L - 145
Type 10 single panel, depth 48mm
Type 11 single panel, depth 48mm
Type 20 double panel, depth 62mm
29. 29
Viola Vertical
Technical
SECTIONONE
Height
(mm)
Type V1-ZB (10)
info per tube
Watts
∆t 50ºC
Weight
kg
Water
cont. litres
1200 99.94 2.62 0.70
1400 117.00 3.00 0.80
1600 133.54 3.38 0.89
1800 149.51 3.75 1.00
2000 164.85 4.12 1.11
2200 179.54 4.48 1.20
2400 193.55 4.84 1.28
Type V1L1-ZB (11)
info per tube
Watts
∆t 50ºC
Weight
kg
Water
cont. litres
140.41 3.55 0.68
160.14 4.02 0.77
179.32 4.49 0.87
198.00 5.04 0.96
216.22 5.59 1.05
234.00 6.15 1.15
251.38 6.73 1.25
Type V2-ZB (20)
info per tube
Watts
∆t 50ºC
Weight
kg
Water
cont. litres
148.17 4.52 1.26
172.67 5.21 1.45
195.40 5.90 1.64
216.22 6.60 1.83
238.08 7.29 2.02
251.95 7.80 2.14
267.87 8.13 2.20
Viola Vertical connection options 1
/2" bsp-f only
1 8
5
1 8
5
18 18
Standard default connections
unless otherwise specified
Visit www.mhsradiators.co.uk for full details
Widths (mm) 215 288 360 433 505 578 650 723 795 868 1013
Number of tubes 3 4 5 6 7 8 9 10 11 12 14
72 72
5 5
27 27
6
2
4
26
8
4 5
8
4 5
45 45
30. 30
Primula Convector
Overview
The Primula Convector is made from 1.5mm steel
and supplied in RAL 9016 Traffic White as
standard, with other finishes available at
additional cost. It has a maximum working
pressure of 4 bar (5.2 bar test) as standard, with
10 bar working (13 bar test) available at additional
cost. Available with a choice of either wall or floor
brackets depending on specification, the Primula
Convector has ½" bsp-f connections (see Primula
sales brochure for additional information). The
Primula Convector radiator carries a 10-year
guarantee against manufacturing defects.
Features
• Types - P1, P2, P3 & P4
• Material - 1.5mm steel finned convector
• Finish - Standard RAL 9016 Traffic White
with other colours available
• Heights - 70, 140, 210 & 280mm
• Lengths - 500-3900mm
• Depths - 80, 130, 180, 230 & 280mm
• Sizes - 393
• Outputs - 203-8464 watts
• Pressure - 4 bar (5.2 bar test)
• Pressure - 10 bar (13 bar test) on request
• Warranty - 10 years
D
L
H
20
3535Min100
= =
Universal connection
arrangement (not type
P1 which has a single
connection at either end,
of which one connection
must be the air vent)
Type P1
Type P2
Type P3
Type P4
31. 31
Primula Convector
Technical
SECTIONONE
Except where noted, all types in all depths are available in the following lengths (mm):
500, 600, 700, 800, 900, 1000, 1100, 1200, 1400, 1600, 1800, 2000, 2200, 2400, 2600, 2800, *3000, *3300, *3600 & *3900mm
*Note: Type P3 280mm deep is not available in length 3900mm
Type P4 230mm deep is not available in lengths 3600mm & 3900mm
Type P4 280mm deep is not available in lengths 3000, 3300, 3600 & 3900mm
Note: Type P1 has 4 x 1/2" connections
@ 1, 3, 6 & 8
Note: Either 3 or 6 must be used as the air vent
Types P2, P3 & P4 have 6 x 1
/2" connections @
1, 2, 3, 6, 7, & 8
Depth
(mm)
Type P1 - 70mm (H)
per linear metre info
Watts
∆t 50ºC
Weight
kg
Water
cont.
litres
80 405 6.13 1.31
130 624 8.65 1.75
180 843 11.40 2.10
230 1045 13.80 2.40
280 1260 16.00 2.80
Type P2 - 140mm (H)
per linear metre info
Watts
∆t 50ºC
Weight
kg
Water
cont.
litres
608 11.46 2.91
884 15.53 3.73
1221 19.80 4.45
1511 23.75 5.45
1905 27.70 5.95
Type P3 - 210mm (H)
per linear metre info
Watts
∆t 50ºC
Weight
kg
Water
cont.
litres
756 16.80 4.50
1120 22.40 5.70
1541 28.20 6.80
1900 33.70 8.50
2351 39.40 9.10
Type P4 - 280mm (H)
per linear metre info
Watts
∆t 50ºC
Weight
kg
Water
cont.
litres
870 22.14 6.10
1355 29.28 7.68
1838 36.60 9.16
2258 43.60 11.56
2670 51.10 12.26
Steel
column
feet,
standard
height
150mm
Wall
mounting
bracket
Primula mounting options
Primula connection options 1
/2" bsp-f only
Visit www.mhsradiators.co.uk for full details
7
6
2
6
2
3
1 8
6
7
6
2
6
2
3
6
2
3
1 8
6
18 18
23
23
27
27
26
7
63
7
63
67 37
Telescopic
floor
mounting
bracket
adjustable
from 205 -
265mm
32. 32
Matrix Horizontal
Overview
The Matrix Horizontal is made from 1.5mm steel and
finished in RAL 9010 Warm White as standard, while RAL
9016 Traffic White is available upon request at no extra cost.
Other RAL colours are available at additional cost. Supplied
with wall brackets, this radiator has a 5.4 bar maximum
working pressure (mwp) (tested to 7 bar) as standard. A high
pressure, 2mm steel version is also available with 10 bar
mwp (13 bar test) to be specified at extra cost.
There are 2 x ½" bsp-f (BBOE 2 and 4 detail) connections as
standard unless otherwise specified; alternative
configurations are also available (some at extra cost), which
must be specified with each order. The Matrix radiator
carries a 5-year guarantee against manufacturing defects.
Features
• Types - H (10), HL (11), H-2 (20), HLH (21) & HL-2 (22)
• Material - Steel (1.5mm flat tubes)
• Finish - Standard RAL 9010 Warm White finish; RAL
9016 Traffic White also available at no extra cost with
other colours available on request
• Heights - 70-840mm
• Lengths - 500-6000mm
• Sizes - 2912
• Outputs - 49-13842 watts
• Maximum working pressure - 5.4 bar
(10 bar on request to be specified)
• Maximum test pressure - Standard 7 bar
(13 bar on request to be specified)
• Warranty - 5 years
Horizontal models
22
16
Bracket positions –
Horizontal models
32
16
58
5539
62
16 73
58
57
103
16
58
126
39
133
16 144
58
57
H
HL
HLH, H-2
HL-2
33. 33
Matrix Horizontal
Technical
SECTIONONE
Height
(mm)
Type H (10)
per linear metre info
Watts
∆t 50ºC
Weight
kg
Water
cont. litres
70 98 2.06 0.56
140 166 4.06 1.10
210 225 6.18 1.80
280 288 8.19 2.35
350 355 10.38 3.05
420 434 12.55 3.78
490 492 14.58 4.30
560 551 16.68 4.92
630 610 18.79 5.55
700 651 20.89 6.18
770 729 22.99 6.80
840 787 25.00 7.47
Type HL (11)
per linear metre info
Watts
∆t 50ºC
Weight
kg
Water
cont. litres
207 3.54 0.56
368 7.35 1.10
505 10.98 1.80
628 14.52 2.35
733 18.44 3.05
834 22.18 3.78
931 25.91 4.30
1022 29.72 4.92
1113 33.37 5.55
1196 37.09 6.18
1248 38.84 6.80
1303 40.60 7.47
Height
(mm)
Type HLH (21)
per linear metre info
Watts
∆t 50ºC
Weight
kg
Water
cont. litres
350 1002 28.58 6.25
420 1139 34.21 7.91
490 1271 39.83 8.89
560 1394 45.37 10.21
630 1513 51.08 11.53
700 1623 56.77 12.85
770 1730 61.02 14.17
840 1839 65.27 15.24
Type H2 (20)
per linear metre info
Watts
∆t 50ºC
Weight
kg
Water
cont. litres
180 4.24 1.14
283 8.45 2.25
393 12.61 3.61
511 16.37 4.92
616 20.85 6.25
723 24.68 7.91
830 29.09 8.89
938 33.20 10.21
1044 37.32 11.53
1148 41.44 12.85
1252 45.56 14.17
1355 49.70 15.24
Type HL-2 (22)
per linear metre info
Watts
∆t 50ºC
Weight
kg
Water
cont. litres
1362 36.43 6.25
1535 43.53 7.91
1698 50.65 8.89
1848 57.66 10.21
1989 64.87 11.53
2112 72.04 12.85
2208 76.53 14.17
2307 81.14 15.24
42
24
7668
5886
32
14
3412
1 3
42
1 3
42
1 3
42
1 3
42
1 3
42
1 3
86
1 3
86
5 7
86
5 7
86
1 3
42
69
1 3
42
89
1 3
42
**
**
****
**
* * *
All heights and types indicated
above are available in lengths
from 500mm to 6000mm in
100mm increments.
Vertical connections
Connection sizes are
available in ½", ¾" and 1"
on most models.
When ordering the
connection size must be
given together with the
relevant connection
number.
Standard connection = 24,
½" BSP (unless specified
otherwise)
Visit www.mhsradiators.co.uk for full details
**
*Air vent **Extra cost
34. 34
Matrix Vertical
Overview
The Matrix Vertical is made from 1.5mm steel and
finished in RAL 9010 Warm White as standard, while
RAL 9016 Traffic White is available on request at no
extra cost. Other RAL colours are available at
additional cost. Supplied with wall brackets, this
radiator has a 5.4 bar maximum working pressure
(mwp) (tested to 7 bar) as standard. A high pressure,
2mm steel version with 10 bar mwp (13 bar test) is
also available at extra cost.
There are 2 x ½" bsp (BBOE 2 and 4 detail)
connections as standard unless otherwise specified;
alternative configurations are also available (some
at extra cost), which must be specified with each
order. The Matrix radiator carries a 5-year guarantee
against manufacturing defects.
Features
• Types - V (10), VL (11), V-2 (20) & VLV (21)
• Material - Steel (1.5mm flat tubes)
• Finish - Standard RAL 9010 Warm White finish;
RAL 9016 Traffic White also available at no extra
cost with other colours available on request
• Heights - 1000-3600mm
• Lengths - 70-1400mm
• Sizes - 840
• Outputs - 68-6360 watts
• Maximum working pressure - 5.4 bar
(10 bar on request to be specified)
• Maximum test pressure - Standard 7 bar
(13 bar on request to be specified)
• Warranty - 5 years
Bracket positions - Vertical models
V (10) V-2 (20),
VLV (21)
VL (11)
V (10) V-2 (20) , VLV (21) VL (11)
Vertical models
35. 35
Matrix Vertical
Technical
SECTIONONE
Height
(mm)
Type V (10)
per 70mm width info
Watts
∆t 50ºC
Weight
kg
Water
cont. litres
1000 68 2.11 0.59
1200 81 2.43 0.69
1400 93 2.87 0.80
1600 105 3.25 0.90
1800 117 3.63 1.00
2000 128 4.01 1.11
2200 139 4.39 1.21
2400 150 4.77 1.31
2600 161 5.15 1.45
2800 172 5.53 1.56
3000 182 5.90 1.67
3200 193 6.28 1.78
3400 204 6.66 1.88
3600 214 7.04 1.99
Type V-2 (20)
per 70mm width info
Watts
∆t 50ºC
Weight
kg
Water
cont. litres
108 4.25 1.20
127 5.04 1.41
145 5.81 1.60
163 6.59 1.80
180 7.37 2.00
197 8.14 2.20
213 8.92 2.40
228 9.70 2.60
243 10.29 2.91
258 11.05 3.12
273 11.81 3.34
288 12.57 3.55
303 13.33 3.77
318 14.08 3.98
Type VL (11)
per 70mm width info
Watts
∆t 50ºC
Weight
kg
Water
cont. litres
107 3.35 0.59
123 3.95 0.69
141 4.87 0.80
157 5.64 0.90
172 6.40 1.00
186 7.24 1.11
201 8.00 1.21
- - -
- - -
- - -
- - -
- - -
- - -
- - -
All heights and types indicated above are
available in widths from 70mm to 1400mm
in 70mm increments.
Height
(mm)
Type VLV (21)
per 70mm width info
Watts
∆t 50ºC
Weight
kg
Water
cont. litres
1000 149 5.47 1.20
1200 176 6.39 1.41
1400 200 7.75 1.60
1600 215 8.89 1.80
1800 237 10.03 2.00
2000 257 11.25 2.20
2200 277 12.47 2.40
Connection sizes are available in ½", ¾" and 1"
on most models.
When ordering the connection size must be given
together with the relevant connection number.
Standard connection = 24, ½" BSP
(unless specified otherwise)
2
12
1 3
4 2
34
1 3
4 2
14
1 3
4
2
32
1 3
4 2
24
1 3
4
2
42
1 3
4
6
68
1 3
8
6
86
1 3
8 2
57
5 7
4
2
75
5 7
4 6
69
1 3
9 8
89
1 3
9
****
**
** ** **
*
*
* *
*Air vent **Extra cost
Connections
36. 36
Matrix Convector
Overview
The Matrix Convector is made from 1.5mm steel and finished in RAL 9010 Warm White
as standard, while RAL 9016 Traffic White is available on request at no extra cost. Other
RAL colours are available at additional cost. Supplied with floor brackets as standard
(wall brackets are available on request), this radiator has a 5.4 bar maximum working
pressure (mwp) (tested to 7 bar) as standard. A high pressure, 2mm steel version with 10
bar mwp (13 bar test) is also available at extra cost. There are 2 x ½" bsp connections
(BBOE 2 and 4 detail) as standard unless otherwise specified; alternative configurations
are also available (some at extra cost), which must be specified with each order. The
Matrix radiator carries a 5-year guarantee against manufacturing defects.
Features
• Types - 2, 3, 4 or 5 panels deep
• Models - Standard (C), High Output (CP)
• Material - 1.5mm steel finned convector
• Finish - Standard RAL 9010 Warm White finish; RAL
9016 Traffic White also available at no extra cost
with other colours available on request
• Heights - 70, 140, 210 & 280mm
• Lengths - 500-6000mm
• Depths - 73-335mm
• Sizes - 1792
• Outputs - 172-18876 watts
• Maximum working pressure - 5.4 bar
(10 bar on request to be specified)
• Maximum test pressure - Standard 7 bar
(13 bar on request to be specified)
• Warranty - 5 years
Connections
42
24
7668
5886
32
14
3412
1 3
42
1 3
42
1 3
42
1 3
42
1 3
42
1 3
86
1 3
86
5 7
86
5 7
86
1 3
42
**
****
**
* * *
Connection sizes are available in
½", ¾" and 1" on most models.
When ordering the connection
size must be given together
with the relevant connection
number.
Standard connection = 24, ½" BSP
(unless specified otherwise)
*Air vent **Extra cost
37. 37
Matrix Convector
Technical
C Range - standard model
SECTIONONE
Depth
(mm)
Type C7 - 70mm (H)
per linear metre info
Type C14 - 140mm (H)
per linear metre info
Type C21 - 210mm (H)
per linear metre info
Type C28 - 280mm (H)
per linear metre info
Watts
∆t 50ºC
Weight
kg
Water
cont. (L)
Watts
(∆t 50ºC)
Weight
kg
Water
cont. (L)
Watts
∆t 50ºC
Weight
kg
Water
cont. (L)
Watts
∆t 50ºC
Weight
kg
Water
cont. (L)
2 Panel - 73mm 344 5.67 1.15 503 11.28 2.40 717 17.72 3.75 877 23.63 5.02
3 Panel - 134mm 599 9.34 1.82 925 19.10 4.05 1188 29.68 5.78 1447 39.39 7.72
4 Panel - 196mm 821 13.03 2.42 1277 27.03 5.01 1643 41.49 8.05 2002 55.28 10.83
5 Panel - 256mm 986 16.63 3.02 1519 34.55 6.09 2060 53.51 10.29 2509 71.36 13.89
Depth
(mm)
Type CP7 - 70mm (H)
per linear metre info
Type CP14 - 140mm (H)
per linear metre info
Type CP21 - 210mm (H)
per linear metre info
Type CP28 - 280mm (H)
per linear metre info
Watts
∆t 50ºC
Weight
kg
Water
cont. (L)
Watts
∆t 50ºC)
Weight
kg
Water
cont. (L)
Watts
∆t 50ºC
Weight
kg
Water
cont. (L)
Watts
∆t 50ºC
Weight
kg
Water
cont. (L)
2 Panel - 92mm 382 6.17 1.15 632 12.85 2.40 851 19.76 3.75 1030 26.67 5.02
3 Panel - 173mm 639 10.23 1.82 1073 21.95 4.05 1447 33.85 5.78 1747 45.75 7.72
4 Panel - 254mm 860 14.90 2.42 1504 31.45 5.01 2046 48.26 8.05 2473 65.08 10.83
5 Panel - 335mm 1120 19.15 3.02 1920 41.17 6.09 26.05 62.50 10.29 3146 83.83 13.89
CP Range - high output model
All heights and types indicated above are available in lengths from 500mm to 6000mm in 100mm increments.
NR150
60 80
L
NR144
40
100
Visit www.mhsradiators.co.uk for full details
Floor bracket - convector models
L
From wall to back of
radiator minimum
C - 2 100mm 30mm
C - 3 150mm 30mm
C - 4 200mm 30mm
C - 5 250mm 30mm
Wall bracket - convector models
Heights 1* 3* 4* 5* 6*
Minimum 65 90 120 180 270
Maximum 90 120 180 270 370
When ordering please specify the height required. NR 150/ _ _ _ _*
38. 38
Ecoguard LST Casings
Overview
The Ecoguard case is made from 1.2mm steel,
enclosing a MHS Kompakt radiator made from
1.15mm steel. Finished in RAL 9016 Traffic White
only, it has a maximum working pressure of 10
bar and is supplied with ½" bsp-f connections.
The MHS Kompakt carries a 10-year guarantee
against manufacturing defects and the Ecoguard
case carries a 5-year guarantee against
manufacturing defects.
Maximum clearance of emitter:
Case height less 250mm
(e.g. 650mm high case = maximum height of
radiator is 400mm)
Case length less 200mm
(e.g. 800mm length case = maximum length of
radiator is 600mm)
Case depth less 15mm from front face of
radiator (e.g. maximum depth of radiator inc.
wall bracket = 135mm)
Reduction of output:
The Ecoguard LST cover will cause a reduction
of approx. 24% of the radiator output.
Features
• To suit Type 11, 21 & 22 Kompakt radiators
• Material - Steel 1.2mm (radiator 1.15mm)
• Finish - RAL 9016 Traffic White (Anti-bacterial)
• Heights - 650 & 750mm
• Lengths - 600-2000mm
• Depth - 150mm
• Sizes - 48 models
• Outputs - 202-1982 watts
• Pressure - 10 bar (13 bar test)
• Warranty - 5 years
VK3 valve kit VK5 valve kitVK4 valve kit
40. 40
Aeroguard -
Floor Standing Overview
Features
• Models - Type D: Solid top with front upper &
bottom outlet grilles
Type F: Top & bottom front outlet grilles
• Material - Casings are of solid construction from
1.2mm zinc coated steel
Emitters are of aluminium/copper finned
construction
• Finish - RAL 9016 Traffic White
semi-gloss (Anti-bacterial)
• Heights - Type D: 595 & 745mm
Type F: 475, 625 & 775mm
• Lengths - 663-2915mm
• Depths - Type H2 Emitter: 145mm
Type H4 Emitter: 264mm
• Sizes - 192
• Outputs - 453-7369 watts
• Pressure - 5 bar (7 bar test)
• Warranty - 5 years
The Aeroguard LST has a 1.2mm steel casing and supplied in
a RAL 9016 Traffic White semi-gloss (Anti-bacterial) finish.
Type D has a solid top and Type F has an upper grille, both
complete with a lower inlet grille enclosing a finned element
made from copper and aluminium. There are TBOE ½"
connections for 3H2 and 5H2 emitters and ¾" connections
for 3H4 and 5H4 emitters. Each has a 5 bar maximum
working pressure, tested to 7 bar. The Aeroguard carries a
5-year guarantee against manufacturing defects.
Note: Anti-ligature grilles are also available and, if specified,
will reduce the stated outputs by approximately 20%. With a
choice of internal VK3 or external VK5 valve sets (see main
Aeroguard brochure for additional information).
Aeroguard casings are supplied assembled for easy on site
installation. Supplied in a durable anti-bacterial polyester
powder coated finish (RAL9016 Traffic White semi-gloss).
The end casings and front panel are manufactured using
1.2mm zinc coated steel. The front panel is made up of a
number of individual sections spot welded together on
their return edges to create a very robust panel.
In addition, a heavier and more robust interlocking 2mm
gauge front casing panel is available in accordance with
Mental Health Care Unit specifications.
Top grille Type DTop grille Type F
Aeroguard Type D
Aeroguard Type F
42. 42
Aeroguard -
Wall Mounted Overview
The Aeroguard LST has a 1.2mm steel casing and
supplied in a RAL 9016 Traffic White semi-gloss
(Anti-bacterial) finish. Type C has a solid top and
Type E has an upper top grille, while both
models have an open base and enclose a finned
element made from copper and aluminium.
There are TBOE ½" connections for 3H2 and 5H2
emitters and ¾" connections for 3H4 and 5H4
emitters. Each has a 5 bar maximum working
pressure, tested up to 7 bar. The Aeroguard
carries a 5-year guarantee against manufacturing
defects.
There is also a choice of internal VK3 or external
VK5 valve sets (see main Aeroguard brochure for
additional information).
Aeroguard Type C
Aeroguard Type E
Features
Models - Type C: Solid top with front
upper outlet grille & open base
Type E: Top grille outlet with
open base
Material - Casings are of solid construction
from 1.2mm zinc coated steel
Emitters are of aluminium
/copper finned construction
Finish - RAL 9016 Traffic White
semi-gloss (Anti-bacterial)
Heights - Type C: 445 & 595mm
Type E: 325, 475 & 625mm
Lengths - 663-2915mm
Depths - Type H2 Emitter: 145mm,
Type H4 Emitter: 264mm
Sizes - 192
Outputs - 480-7885 watts
Pressure - 5 bar (7 bar test)
Warranty - 5 years
44. 44
Aeroguard -
Freestanding LST Overview
The Aeroguard LST has a 1.2mm steel casing and
supplied in a RAL 9016 Traffic White semi-gloss
(Anti-bacterial) finish. Type DS has a solid top and
Type FS has an upper top grille, while both models
have a lower inlet grill enclosing a finned element
made from copper and aluminium.
There are TBOE ½" connections for 3H2 and 5H2
emitters and ¾" connections for 3H4 and 5H4
emitters. Each has a 5 bar maximum working
pressure, tested up to 7 bar. The Aeroguard carries
a 5-year guarantee against manufacturing defects.
There is also a choice of internal VK3 or external
VK5 valve sets (see main Aeroguard brochure for
additional information).
Note: DS and FS models also have rear facing
grille(s) as standard, matching the front grille.
An optional solid panel is also available if specified
for the rear.
Features
Models - Type DS: Solid top with front
upper & bottom outlet grilles
Type FS: Top & bottom front
outlet grilles
Material - Casings are of solid construction
from 1.2mm zinc coated steel
Emitters are of aluminium
/copper finned construction
Finish - RAL 9016 Traffic White
semi-gloss (Anti-bacterial)
Heights - Type DS: 595mm
Type FS: 475 & 625mm
Lengths - 663 - 2915mm
Depths - Type H2 Emitter: 164mm,
Type H4 Emitter: 288mm
Sizes - 96
Outputs - 453-6642 watts
Pressure - 5 bar (7 bar test)
Warranty - 5 years
Aeroguard Type DS Freestanding
Aeroguard Type FS Freestanding
45. 45
Aeroguard -
Freestanding LST Overview
SECTIONTWO
Visit www.mhsradiators.co.uk for full details
Note: FS and DS models have rear facing grille as standard, this matches the front grille.
An option of solid panel is also available for the rear (please specify when ordering)
Height (mm) 445
Emitter 3H2 3H4
Case length (mm) Watts ∆t 50⁰C
663 453 860
867 648 1232
1072 832 1580
1278 1027 1953
1483 1211 2301
1688 1397 2654
1892 1586 3013
2096 1776 3375
2301 1965 3735
2506 2151 4087
2710 2341 4448
2915 2536 4819
Height (mm) 475 625
Emitter 3H2 3H4 3H2 5H2 3H4 5H4
Case length (mm) Watts ∆t 50⁰C
663 453 860 485 593 922 1129
867 648 1232 700 856 1330 1626
1072 832 1580 916 1122 1740 2131
1278 1027 1953 1130 1383 2148 2629
1483 1211 2301 1346 1647 2558 3130
1688 1397 2654 1564 1913 2972 3635
1892 1586 3013 1779 2176 3381 4135
2096 1776 3375 1994 2439 3789 4634
2301 1965 3735 2210 2704 4199 5137
2506 2151 4087 2425 2967 4609 5639
2710 2341 4448 2640 3230 5017 6137
2915 2536 4819 2856 3495 5427 6642
Type DS
Type FS
46. 46
Slimguard
Overview
The Slimguard LST has a 1.2mm steel casing and
supplied in a RAL 9016 Traffic White semi-gloss
(Anti-bacterial) finish. Each unit houses a finned
element made from copper and aluminium with
½” bsp-f TBOE connections. Radiators have a
5 bar maximum working pressure, tested to
7 bar. The Type D model has a bottom inlet grille
while Type C features an open base. The
Slimguard carries a 5-year guarantee against
manufacturing defects, while a choice of
internal VK3 or external VK5 valve sets is
available (see main Slimguard brochure for
additional information).
Features
• Models - Type C: Wall mounted with
open base
Type D: Floor mounted with
bottom inlet grille
• Material - Casings are of solid construction
from 1.2mm zinc coated steel
Emitters are of aluminium/copper
finned construction
• Finish - RAL 9016 Traffic White
semi-gloss (Anti-bacterial)
• Heights - Type C: 440, 590, 740 & 890mm
Type D: 580, 730, 880 & 1030mm
• Lengths - 661-2911mm
• Depth - 75mm
• Sizes - 192
• Outputs - 214-2570 watts
• Pressure - 5 bar (7 bar test)
• Warranty - 5 years
Slimguard Type D
48. 48
Aeroguard - Vertical
Overview
The Aeroguard Vertical case is made from 1.2mm
steel and finished in RAL 9016 Traffic White. It
encases a MHS Kompakt Vertical radiator made
from 1.15mm steel, with a 10 bar maximum
working pressure (13 bar test pressure).
Supplied with ½" bsp-f connections, the MHS
Kompakt Vertical radiator carries a 10-year
guarantee against manufacturing defects, while
the Aeroguard Vertical case has a 5-year
guarantee.
Features
• Types - 21
• Material - 1.2mm steel case (radiator 1.15mm)
• Finish - RAL 9016 Traffic White
• Height - 2100mm
• Lengths - 663, 867 & 970mm
• Sizes - 3
• Outputs - 1297-1896 watts
• Pressure - 10 bar (13 bar test)
• Warranty - 5 years
c/w Kompakt Vertical Type 21 radiator
Watts
∆t 50ºC
Case
weight
kg
Radiator
weight
kg
Water
cont.
litres
1297 19.50 41.96 9.00
1422 23.00 50.35 10.81
1896 25.00 67.14 14.42
Case
length
(mm)
Rad
length
(mm)
663 500
867 600
970 800
Case height 2100mm
(Radiator height 1800mm)
49. 49
SECTIONTWO
LST TRV Options
VK3: The VK3 valve kit is an internal
control and comprises 1
/2" angle
pattern presettable valve body, remote
sensing phial and TRV head, plus a 1
/2"
angle lockshield valve on the return
connection.
Easy installation
1 2 3
Fix brackets to wall. Fit emitter. Fit case - job done!
VK kits are for use on two pipe systems (one pipe system kits are available on request) the
TRVs provided are not bi-directional and must always be connected to the flow pipework.
VK5: The VK5 valve kit is an external control
mounted partially recessed into the top right
hand side of the casing and comprises 1
/2"
angle pattern presettable valve body, remote
transmitter and TRV head, plus a 1
/2" angle
lockshield valve on the return connection.
NB: The VK5 can be installed on either the
RH/LH sides as standard. If required the
opposing hand plastic knock-out plug can
be deleted.
VK4: The VK4 valve kit is an external
control for remote mounting and
comprises 1
/2" angle pattern
presettable valve body, remote
transmitter and TRV head, plus a 1
/2"
angle lockshield valve on the return
connection.
The VK4 can be located on either the
RH/LH sides and also, if required, on
the front panel, head positioning must
be specified at the point of order.
The VK4 is not available for the
Eco/Slimguard models.
VK4 c/w anti-ligature shroud
VK4
VK3
VK5
50. 50
Fan Convectors
Overview
All fan convectors benefit from an all-metal
construction, rounded corners and edges,
and security locks as standard. All units have
a washable G2 (EU2 Filter), as well as
automatic temperature control, on/off
thermostat and low/medium fan speed
thermostat. There are pencil proof grilles for
added safety, as well as a low water
temperature cut-out.
Features
• Types - Floor (MH/F), Wall (MH/W)
& Ceiling (MH/S)
• Material - Casing: 1.2mm steel
Element: 15mm copper tube
Fins: aluminium
• Finish - RAL 9010 Warm White
(casing & grilles)
• Heights - 680mm
• Widths - 895, 1195 & 1495mm
• Sizes - 3
• Nominal outputs - 4.7, 5.9 & 9.0kW
• AC & EC motor options
• Pressure - 7 bar working (10.5 bar test)
• Warranty - 2 years
MH/F
MH/W
MH/S
51. 51
Fan Convectors
Technical
SECTIONTWO
Based on mean LPHW of 82°C, EAT 20°C
Visit www.mhsradiators.co.uk for full details
Model
kW l/s Temp kW l/s Temp
Low speed Medium speed
400 4.7 105 52 6.30 150 51
600 5.9 135 52 8.60 210 50
1000 9.0 205 52 11.90 290 50
230
A
675PLINTH
100
242
A
677
253
680
A
Model MH/F
Model MH/S
Model MH/W
Model A
MH/F400 895
MH/F600 1195
MH/F1000 1495
Model A
MH/W400 902
MH/W600 1202
MH/W1000 1502
Model A
MH/S400 902
MH/S600 1202
MH/S1000 1502
52. 52
Moduline Lightweight
Radiant Panels- Overview
Moduline radiant panels are designed for a wide
range of applications, including hospitals, school
classrooms, assembly halls, residential care homes
and offices.
Type MCG - panels can be fitted into a suspended
ceiling system with 600mm grid, positioned in
place of tiles.
Type MCS - panels can be fixed directly onto the
underside of a ceiling slab or soffit.
Type MWS - panels can be mounted vertically onto
a wall surface, resulting in higher heat outputs.
Type MFS - panels include hanging brackets for
suspension on drop rods or wire (by others), from
secondary steelwork, to enable installation at
lower heights.
Features
• Models - Type MCG, MCS, MWS & MFS
• Material - Aluminium alloy sheet
with bonded extruded
aluminium channel
15mm OD copper tube
mechanically located with
steel spring clips
50mm mineral wool
insulation enveloped in
class 0 aluminium foil
• Finish - RAL 9010 (Satin)
• Panel widths - 590mm
• Nominal 600, 900, 1200, 1500, 1800, 2000,
lengths - 2100, 2400, 2500, 2700 & 3000mm
• Nominal 185-281 watts
outputs - per linear metre
• Pressure - 7 bar working (12 bar test)
• Warranty - 5 years
2T Type MFS, MCS & MWS
typical panel end detail
Type MCG 2T
typical panel
53. 53
Moduline Lightweight
Radiant Panels-Technical
SECTIONTWO
Visit www.mhsradiators.co.uk for full details
Type MCG
2 Tube 4 Tube
Watts
∆t 50ºC *
Dry mass
kg
Watts
∆t 50ºC *
Dry mass
kg
185 5.2 268 7.1
Type MCS & MFS
2 Tube 4 Tube
Watts
∆t 50ºC *
Dry mass
kg
Watts
∆t 50ºC *
Dry mass
kg
185 7.7 268 9.6
Type MWS
2 Tube 4 Tube
Watts
∆t 50ºC *
Dry mass
kg
Watts
∆t 50ºC *
Dry mass
kg
233 7.7 281 9.6
Technical info per linear metre
Notes:
1. Thermal outputs are rated as defined in the relevant standard and are both radiant and convective.
2. Types MCG, MCS & MFS; ~60% of total output is radiant; Style WS; ~53% of total output is radiant.
3. Outputs for Types MCG, MCS & MFS are rated to BS EN 14037 Parts 1, 2 & 3, BS EN 14037 applies to horizontally mounted panels only
4. Outputs for Types MWS-2T and MWS-4T are rated to BS EN 442 Part 2.
5. Dry masses exclude additional angle brackets used on wall mounted applications
Water Mass Flow Rate kg/s
0.01
10
20
30
40
50
60
70
80
90
100
200
300
400
500
600
700
800
900
1000
0.02 0.03 0.05 0.07 0.1 0.2 0.3 0.5 0.7 1.0
PressureLossPa/m
M6 drop rod & M6 full nut, washers (by
others) alternative position for drop rod
Hanging bracket supplied
loose for site fitting
Ø7.0 holes for suitable fixings (fixings by others)
Ø7.0 holes for suitable fixings (fixings by others)
594
594
594
590
600
Tube Seat Aluminium Panel Ø15 O.D copper tube
“T” Bar (by others)
47
4747
47 47250
250 80mm Spacer
Backplate Spacer
61
47
61
97
Hydraulic resistance
Hydraulic resistance of moduline pipework. Note that
water mass flow rates apply for each circuit in the system.
MFS
Installation details
MCS
MWS
MCG
*70°C MWT, 20°C ambient air temperature
54. 54
Sunline Heavy Duty
Radiant Panel Overview
Sunline radiant heating panels are
manufactured from 1.2mm cold rolled steel
plate, utilise precision steel tubes and are
insulated with 40mm thick aluminium foil
backed non-flammable insulating material.
All panels are powder coated in a RAL 9016
Traffic White finish, with alternative RAL colours
available on request. Sunline radiant heating
panels are pressure tested for a system pressure
of up to 10 bar and carry a 5-year guarantee
against manufacturing defects.
Features
• Material - 1.2mm rolled steel plate
28mm precision welded steel tubes
40mm thermal insulation mat with
reinforced aluminium foil lining
• Finish - Toxic free powder coated to RAL 9016
• Panel 300, 450, 600, 750, 900, 1050, 1200,
widths - 1350 & 1500mm
• Lengths - Single lengths up to 6000mm long
• Outputs - 178-747 watts per m2
• Pressure - Tested for up to 10 bar working
• Warranty - 5 years
Principle of operation
Perceived temp
18ºC
Air temp 15ºC
Object surface
temp 21ºC
Object surface
temp 21ºC
55. 55
Sunline Heavy Duty
Radiant Panel Technical
SECTIONTWO
Number of tubes 2 3 4 5 6 7 8 9 10
Water content (kg/m) 1.0 1.6 2.1 2.7 3.2 3.7 4.3 4.8 5.2
Weight (kg/m)
(including water & insulation)
6.6 9.9 13.2 16.5 19.8 23.1 26.4 29.8 33.1
Nominal heat output
Watts Δt 50⁰C (W/m)
160 219 278 343 408 473 537 603 668
Width (mm) 300 450 600 750 900 1050 1200 1350 1500
Panel model 300/2 450/3 600/4 750/5 900/6 1050/7 1200/8 1350/9 1500/10
Manifolds can either be "In-line" or "Set-up" type as shown in the diagrams below. A variety of connection arrangements are available
for the connection of system flow/return pipes and air vents.
In-line manifold
In-line manifold
40mm
40mm
7mm Tube
50mm
Set-up manifold
Set-up manifold
End face plate
4
40mm
Tube
95mm
55mm
40mm
4
60mm 50mm
In-line manifold Set-up manifold
Manifold arrangements
Multi-panel in series (lengths 6000mm+)
For a total length greater than 6000mm, a Multi-panel arrangement is used comprising individual panels which are joined in series
using press-fittings – panels are supplied with cover plate to present a continuous appearance.
Multi-panel lengths are available from 6000mm+
Total length (TL)
Press-fittings & cover plate Press-fittings & cover plate
P
Suspension bar 100mm gap between
multi-panels to accomodate
press-fittings & cover plate
100mm gap between
multi-panels to accomodate
press-fittings & cover plate
First panel End panelIntermediate panel(s)
4
7mm
40mm
7mm
40mm
7
3
56. 56
Voltec
Overview
Features
• Efficient, convenient low energy
zonal heating
• Wirelessly controlled, maintenance free
sealed units
• Multi-zone control
(each zone requires separate controller)
• Types - Domestic & LST Healthcare versions
• Models - Position vertically or horizontally -
Specify from one range!
• Finishes - White
• Heights - 250, 500, 750, 1000,
1500 & 2000mm
• Widths - 250, 500, 750, 1000,
1500 & 2000mm
• Depths - Space saving!
Only 50mm wall to face
• Outputs - 400-1600 watts
• Warranty - 2 years
Zone 1
living room
Zone 2
bedrooms
Zone 3
bathroom + hall
Control area
LEDs
Switch
Element
Aerial
Receiver
Power cable
Thermal sensor
Thermal differential
+/-1ºC
Circuit board
Voltec slimline flat panel electric radiant panels
are supplied with on/off switch with radio
frequency control compatibility (controller
supplied separately, powered by 2 x 1.5V
alkaline batteries).
Powder coated in RAL 9016 Traffic White, Voltec
can be fitted either horizontally or vertically, while
a low surface temperature option is also available
(if specified). The Voltec radiator carries a 2-year
guarantee against manufacturing defects and
requires a 240V single phase connection.
57. 57
Voltec
Technical
SECTIONTWO
WCT100TX Wireless Controller, suitable for LST
Voltec radiators. 30m range.
WCT500TX Wireless Controller, suitable for non-
LST Voltec radiators. 30m range.
1
Measure bracket
height, ensuring
it is level
Mark where the
holes for the
brackets need
to be drilled
2
Drill marked
holes and
fasten brackets
to wall
Hang radiator
on to brackets,
ensuring it is
secure
3
4
Connect fused
spur (or plug
into 13A socket)
Turn radiator
on and easily
synchronise
with wireless
controller
5
6
Controllers
Standard model technical info LST model technical info
Height
(mm)
Width
(mm)
Element
(Watts)
Output
(Watts)
250 1000 500 400
250 1500 750 600
250 2000 1000 800
500 500 500 400
500 750 750 600
500 1000 1000 800
500 1500 1500 1200
500 2000 2000 1600
Height
(mm)
Width
(mm)
Element
(Watts)
Output
(Watts)
250 1000 250 148
250 1500 500 222
250 2000 500 295
500 500 250 148
500 750 500 222
500 1000 500 295
500 1500 1000 443
500 2000 1000 590
58. 58
Multisec Wall
Overview
The Multisec Wall radiator is made from 25mm diameter,
1.2mm steel with 1.5mm headers. It is finished in RAL
9016 Traffic White as standard (with other colours
available). Each radiator is supplied with wall brackets,
plug and air vent. Capable of operating up to 8 bar
(tested to 10 bar), each Multisec radiator has ½”bsp-f
connections (standard connection detail 08 = BBOE).
Alternative configurations are also available (some at
extra cost), although these must be specified with each
order (see main Multisec sales brochure for more
information). The Multisec radiator carries a 5-year
guarantee against manufacturing defects.
Features
• Types - 2, 3, 4, 5 & 6 Column
• Material - Steel
• Standard finish - RAL 9016 Traffic White
67 exclusive colours on request
• Heights - 302, 402, 502, 602, 667*, 752, 902, 1002,
1202, 1502, 1802, 2002, 2202 & 2502mm
* 3 & 4 Column models only
• Lengths - Modular
• Curved models also available
• Bespoke connection options
• Pressure - 8 bar (10 bar test)
• Warranty - 5 years
65 101 139 189 230
4Wall to centre of
tapping 56.5mm
Wall to front of
radiator 89mm
Wall to centre of
tapping 74.5mm
Wall to front of
radiator 125mm
Wall to centre of
tapping 93.5mm
Wall to front of
radiator 163mm
Wall to centre of
tapping 112.5mm
Wall to front of
radiator 201mm
Wall to centre of
tapping 131.5mm
Wall to front of
radiator 239mm
2 Column 3 Column 4 Column 5 Column 6 Column
60. 60
Multisec Floor
Overview
The Multisec Floor radiator is made from 25mm
diameter, 1.2mm steel with 1.5mm headers. It is
finished in RAL 9016 Traffic White as standard (with
other colours available). Each model is supplied
with 97mm high welded integral feet, wall
brackets, plug and air vent. Capable of operating
up to 8 bar (tested to 10 bar), each Multisec
radiator has ½”bsp-f connections (standard
connection detail 08 = BBOE). Alternative
configurations are also available (some at extra
cost), although these must be specified with each
order (see main Multisec sales brochure for more
information). The Multisec radiator carries a 5-year
guarantee against manufacturing defects.
Features
• Types - 2, 3, 4, 5 & 6 Column
• Material - Steel
• Standard finish - RAL 9016 Traffic White
67 exclusive colours on request
• Heights - 399, 499, 599, 699, 764*, 849,
999, 1099, 1299, 1599, 1899, 2099, 2299
& 2599mm
* 3 & 4 Column models only
• Lengths - Modular
• Curved models also available
• Bespoke connection options
• Pressure - 8 bar (10 bar test)
• Warranty - 5 years
4 Column 6 Column3 Column
Side
View
S
66
Side ViewS
101
Side View
6 139
Side View S
189
Side View
S
215
4
Wall to centre of
tapping 56.5mm
Wall to front of
radiator 89mm
Wall to centre of
tapping 74.5mm
Wall to front of
radiator 125mm
Wall to centre of
tapping 93.5mm
Wall to front of
radiator 163mm
Wall to centre of
tapping 112.5mm
Wall to front of
radiator 201mm
Wall to centre of
tapping 131.5mm
Wall to front of
radiator 239mm
2 Column 3 Column 4 Column 5 Column 6 Column
62. 62
Decoral & Decoral Hi
Overview
The aluminium Decoral is finished in RAL 9016
Traffic White and can operate up to 6 bar maximum
working pressure (tested to 8 bar). Radiators are
supplied complete with wall brackets and ½” bsp-f
connections. The Decoral carries a 10-year
guarantee against manufacturing defects.
Decoral Electric only models are supplied factory
filled and tested, with the electric element fitted to
the right hand side, unless specified otherwise.
The POL1 element and IP54 elements carry a 2-year
guarantee against manufacturing defects. Please
note, the electric model also requires a 240V single
phase connection.
Features
• Types - Horizontal & Vertical models
• Material - Recycled/recyclable aluminium
• Standard finish - RAL 9016 Traffic White
• Heights - Horizontal:
431, 581, 681, 781 & 881mm
• Heights - Vertical:
971, 1071, 1271, 1471, 1671, 1871 & 2071mm
• Lengths - Modular:
240 to 2000mm in increments of 80mm
• Lengths - Vertical:
240 to 640 in increments of 80mm
• Pressure - 6 bar (8 bar test)
• Warranty - 10 years
End panels are available at an additional cost.
End panels Code
431mm ZXDEC-05
581mm ZXDEC-06
681mm ZXDEC-07
781mm ZXDEC-08
881mm ZXDEC-09
63. 63
SECTIONTHREE
431mm high 581mm high 681mm high 781mm high 881mm high
Per sect Per metre Per sect Per metre Per sect Per metre Per sect Per metre Per sect Per metre
Watts 88.0 1100 117.0 1463 143.0 1788 153.0 1913 168.0 2100
Weight kg 1.09 13.63 1.42 17.75 1.73 21.63 1.88 23.50 2.01 25.13
Water cont. litres 0.36 4.50 0.46 5.75 0.53 6.63 0.60 7.50 0.67 8.38
Technical info per section & linear metre
Horizontal (short) models - maximum 25 section factory length
970mm high 1070mm high 1270mm high 1470mm high 1670mm high
Per sect Per metre Per sect Per metre Per sect Per metre Per sect Per metre Per sect Per metre
Watts 169.6 2120 184.6 2308 211.9 2649 237.1 2964 261.4 3268
Weight kg 1.85 23.13 2.00 25.00 2.30 28.75 2.60 32.50 2.90 36.25
Water cont. litres 0.37 4.63 0.38 4.75 0.40 5.00 0.50 6.25 0.60 7.50
1870mm high 2070mm high
Per sect Per metre Per sect Per metre
Watts 284.9 3561 307.6 3845
Weight kg 3.20 40.00 3.50 43.75
Water cont. litres 0.65 8.13 0.70 8.75
Vertical (tall) models - maximum 8 section factory length
Electric models
Lengths available
Length
431mm
high
581mm
high
681mm
high
400mm
5 sections
3
300 (watts)
3
300 (watts)
3
600 (watts)
560mm
7 sections
3
600 (watts)
8 8
640mm
8 sections
8 3
900 (watts)
3
900 (watts)
800mm
10 sections
3
900 (watts)
8 3
1200 (watts)
1040mm
13 sections
8 3
1200 (watts)
8
1120mm
14 sections
3
1200 (watts)
8 8
1360mm
17 sections
8 8 3
1500 (watts)
1520mm
19 sections
8 8 3
2000 (watts)
Length
(mm)
Number of
sections
240 3
320 4
400 5
480 6
560 7
640 8
720 9
800 10
880 11
960 12
1040 13
1120 14
1200 15
1280 16
1360 17
1440 18
1520 19
1600 20
1680 21
1760 22
1840 23
1920 24
2000 25
* Overall length is above plus 20mm for end bushesElectric element adds approx. 55mm to above overall lengths
64. 64
Tulipa
Overview
The Tulipa is made from 1.5mm steel and produced in
RAL 9016 Traffic White as standard, with other finishes
available at additional cost. This radiator has a 4 bar
maximum working pressure (mwp) (tested to 5.2 bar)
as standard, while a high pressure test (HPT) model
with 10 bar mwp (tested to 13 bar) is also available at
additional cost. All Tulipa radiators are supplied
complete with wall brackets. There are 2 x ½" bsp-f
downward facing connections (detail 1 and 8) for
most models, excluding the 6 and 8 section radiators,
which have side connections 2 and 7 as standard
unless otherwise specified. The Tulipa radiator carries
a 10-year guarantee against manufacturing defects.
Features
• Types - Horizontal & Vertical models
• Material - 57.5 x 10mm steel tubes
• Finish - RAL 9016 Traffic White
• Heights Horizontal - 400, 500, 600, 700
800 & 900mm
• Heights Vertical - 1000, 1200, 1400, 1600,
1800, 2000, 2200, 2400, 2600, 2800 &
3000mm
• Lengths - Horizontal: 540-3060mm
• Lengths - Vertical: 270-1260mm
(Lengths in 90 & 180mm increments)
• Sizes - 223 Horizontal, 247 Vertical
• Outputs - Horizontal: 330-5147 watts
• Outputs - Vertical: 357-5510 watts
• Pressure - 4 bar (5.2 bar test)
• Warranty - 10 years
Unless otherwise specified the standard connections are 18 on all models
excluding 6 and 8 section radiators which will have connection detail 27'
Connections
1 8
63
1 8
63
18 18
7
6
2
3
7
6
2
3
27 27
Standard connection
Single Double
Standard connection
6 and 8 section vertical models
65. 65
Tulipa
Technical
SECTIONTHREE
Height
(mm)
Type
Watts ∆t 50ºC Weight kg Water content litres
Per sect Per metre Per sect Per metre Per sect Per metre
1000
Single 59.5 1322 1.55 34.44 0.44 9.78
Double 100.5 2233 2.94 65.33 0.76 16.89
1200
Single 70.3 1563 1.83 40.67 0.50 11.11
Double 117.5 2611 3.50 77.78 0.90 20.00
1400
Single 81.3 1807 2.11 46.89 0.57 12.67
Double 134.7 2993 4.05 90.00 1.04 23.11
1600
Single 92.8 2063 2.34 52.00 0.63 14.00
Double 151.8 3374 4.61 102.44 1.18 26.22
1800
Single 104.5 2322 2.63 58.44 0.72 16.00
Double 169.2 3759 5.15 114.44 1.35 30.00
2000
Single 116.7 2593 2.92 64.89 0.80 17.78
Double 186.8 4152 5.70 126.67 1.52 33.78
2200
Single 129.2 2870 3.20 71.11 0.89 19.78
Double 204.8 4552 6.25 138.89 1.68 37.33
2400
Single 141.3 3141 3.49 77.56 0.97 21.56
Double 222.5 4944 6.80 151.11 1.85 41.11
2600
Single 153.5 3411 3.78 84.00 1.05 23.33
Double 240.2 5337 7.35 163.33 2.02 44.89
2800
Single 165.7 3681 4.07 90.44 1.14 25.33
Double 257.8 5730 7.89 175.33 2.19 48.67
3000
Single 177.8 3952 4.36 96.89 1.22 27.11
Double 275.5 6122 8.44 187.56 2.36 52.44
Height
(mm)
Type
Watts ∆t 50ºC Weight kg Water content litres
Per sect Per metre Per sect Per metre Per sect Per metre
400
Single 27.5 611 0.71 15.78 0.22 4.89
Double 47.6 1057 1.21 26.89 0.37 8.22
500
Single 33.0 733 0.85 18.89 0.25 5.56
Double 56.8 1263 1.50 33.33 0.43 9.56
600
Single 38.3 852 0.99 22.00 0.29 6.44
Double 65.8 1463 1.79 39.78 0.50 11.11
700
Single 43.6 969 1.13 25.11 0.33 7.33
Double 74.6 1657 2.08 46.22 0.57 12.67
800
Single 48.9 1087 1.27 28.22 0.37 8.22
Double 83.3 1852 2.37 52.67 0.63 14.00
900
Single 54.3 1206 1.41 31.33 0.40 8.89
Double 91.9 2043 2.63 58.44 0.70 15.56
Tulipa Horizontal
Tulipa Vertical
Tulipa Horizontal lengths
Except for where noted, all
models are available in the
following lengths (mm):
540,630,720,810,900,990,
1080,1170,1260,1440,1620,
1800,1980,2160,2340,2520,
2700*,2880* and 3060*.
800mm High Double Tube is
not available in lengths 2880
and 3060mm
900mm High Double Tube is
not available in lengths 2700,
2880 and 3060mm
Tulipa Vertical lengths
Except for where noted, all
models are available in the
following lengths (mm):
270,360,450,540,630,720,810,
900,990*,1080*,1170*1260*
2000mm High Double Tube is not
available in lengths 1260mm
2200mm High Double Tube is not
available in lengths 1170 and
1260mm
2400 and 2600mm High Double
Tube is not available in lengths
1080, 1170 and 1260mm
2800 and 3000mm High Double
Tube is not available in lengths 990,
1080, 1170 and 1260mm
66. 66
Classic Line
Overview
The Classic Line radiator is made from 1.15mm
steel and finished in RAL 9016 Traffic White. Each
radiator is supplied with wall brackets, plug and
air vent. Each radiator has a maximum working
pressure of 5 bar with ½” bsp-f connections. The
Classic Line carries a 10-year guarantee against
manufacturing defects.
Features
• Depths - 250mm in 300mm height,
160 and 220mm in 450mm height,
110,160 and 220mm in both 600 and
1000mm height.
• Material - 1.15mm pressed steel
• Finish - RAL 9016 Traffic White
• Heights - 300, 450, 600 & 1000mm
• Lengths - 178-3028mm
(Lengths in 50mm increments)
See model restrictions.
• Sizes - 425
• Outputs - 165-4700 watts
• Pressure - 5 bar maximum working pressure
• Warranty - 10 years
278mm
(5 sections)
328 - 1278mm
(6 - 25 sections)
1328 - 2528mm
(26 - 50 sections)
2578 - 3028mm
(51 - 60 sections)
Position of hanging straps
67. 67
Classic line
Technical
SECTIONTHREE
Model
Height
(mm)
Depth
(mm)
Maximum
number of
sections
Watts
∆t 50ºC
per section
Watts
∆t 50ºC
per metre
Weight
kg
per section
Weight
kg
per metre
Water
content litres
per section
Water
content litres
per metre
300-250 300 250 60 62 1240 1.54 30.80 0.99 19.80
450-160 450 160 60 58 1160 1.51 30.20 0.95 19.00
450-220 450 220 60 75 1500 2.05 41.00 1.23 24.60
600-110 600 110 60 55 1100 1.14 22.80 0.84 16.80
600-160 600 160 48 73 1460 2.05 41.00 1.16 23.20
600-220 600 220 50 94 1880 2.64 52.80 1.49 29.80
1000-110 1000 110 45 84 1680 2.22 44.40 1.15 23.00
1000-160 1000 160 30 111 2220 3.27 65.40 1.65 33.00
1000-220 1000 220 30 145 2900 4.58 91.60 2.43 48.60
7
6
2
3
7
6
2
3
7
6
2
3
7
6
2
3
7
6
2
3
7
6
2
3
L = No. of sections x 50 +24mmAir vent in connection 3 or 6
Connections
Wall bracket Optional floor support
min125-max175
60
68. 68
Ionic
Overview
The Ionic is a cast iron radiator supplied in Umber Grey
Primer as standard that requires over painting, with
painted finishes available at additional cost. The Ionic
radiator has a maximum working pressure of 6 bar with a
maximum test pressure of 7.8 bar (water test only).
Integral feet and wall ties are supplied as standard, while
a wall mounted version can also be specified at no
additional cost. All radiators are supplied with ½” bsp-f
(BBOE) connections, ¾”or 1” connections, while TBOE or
TBSE connections are also available (to be specified at
time of order). The Ionic radiator carries a 10-year
guarantee against manufacturing defects.
Ionic Electric Specification
Ionic Electric only models are supplied factory filled and
tested, with the electric element fitted to the right hand
side, unless otherwise specified. The white POL1
element is adjustable and IP54 rated, with a 2-year
guarantee against manufacturing defects. Please note, a
240V single phase connection is required.
Features
• Types - 4 & 6 Column
• Material - Cast iron
• Standard finish - Primer (Umber Grey)
• Heights - 300, 415, 425*, 600, 700 & 900mm
* 425mm high 6 column only
• Lengths - Modular (60mm per section)
• Depths - 4 Column: 144mm
6 Column: 221mm
• Pressure - 6 bar
(test pressure of 7.8 bar max - water test only)
• Electric models available
• Warranty - 10 years
28-4 42-4 60-4 70-4 90-4 60-6
D
W
42-6
Bush
13mm
each
175mm
110mm
252mm
Shown hear in Gunmetal finish with optional Chartwell Brass TRV valves
110mm
H
2
H
1
C