A leading European producer of steel pipes; Borusan Mannesmann is the choice of clients across Europe, US and Canada for the supply of pipes to their Fire Protection, Mechanical, Heating, Ventilation and Plumbing industries. UL listed, FM approved, NSF and DVGW certified Borusan Mannesmann Easy Flow pipes are now dual certified according to EN 10255 and EN 10217-1 to enhance the safety of your projects and with the professional service and high quality assurance of Borusan Mannesmann, a brand known all over the world. Dual certification of pipes enables installations in accordance with Pressure Equipment Directive (PED) where applicable.

1. EASY FLOW®
DUAL CERTIFIED PIPES
(EN 10255 & EN 10217-1)
A leading European producer of steel pipes; Borusan Mannesmann is the choice of clients across Europe,
US and Canada for the supply of pipes to their Fire Protection, Mechanical, Heating, Ventilation and
Plumbing industries.
UL listed, FM approved, NSF and DVGW certified Borusan Mannesmann Easy Flow pipes are now dual
certified according to EN 10255 and EN 10217-1 to enhance the safety of your projects and with the
professional service and high quality assurance of Borusan Mannesmann, a brand known all over the
world. Dual certification of pipes enables installations in accordance with Pressure Equipment Directive
(PED) where applicable.
Borusan Mannesmann Easy Flow Dual Certified Pipes are available as;
• Medium or Heavy weight
• Red painted, galvanised or self color
• Plain ends, grooved (Victaulic) or threaded & coupled. Pipes are also suitable for on - site machining
such as bending, threading, grooving and welding.

2. E-mail: export@borusan.com www.borusanmannesmann.com
CHEMICAL COMPOSITION (CAST ANALYSIS) AND MECHANICAL PROPERTIES
Steel Name
S195T/P195- TR 1
C
max
0,20
Mn
max
1,40
P
max
0,035
S
max
0,030
Steel Grade Chemical Composition %
Upper Yield Strength
ReH min (MPa)
195
Mechanical Properties
Tensile Strength
Rm (MPa)
320 to 520
Elongation
A min %
20
DIMENSIONS AND MASS PER UNIT LENGTH
(mm)
Heavy Weight
15
20
25
32
40
50
65
80
100
125
150
(inch)
1/2
3/4
1
1 1/4
1 1/2
2
2 1/2
3
4
5
6
NB
Nominal Bore
max (mm)
21.8
27.3
34.2
42.9
48.8
60.8
76.6
89.5
115.0
140.8
166.5
min (mm)
21.0
26.5
33.3
42.0
47.9
59.7
75.3
88.0
113.1
138.5
163.9
OD
Outside Diameter
(mm)
3.2
3.2
4.0
4.0
4.0
4.5
4.5
5.0
5.4
5.4
5.4
(kg/m)
1.44
1.87
2.93
3.79
4.37
6.19
7.93
10.3
14.5
17.9
21.3
T
Wall
Thickness
Plain end/
grooved tube
(kg/m)
1.45
1.90
2.96
3.84
4.44
6.28
8.07
10.45
14.8
18.4
21.9
Screwed
and socketed
Weight per meter
Medium Weight
(mm)
2.6
2.6
3.2
3.2
3.2
3.6
3.6
4.0
4.5
5.0
5.0
(kg/m)
1.21
1.56
2.41
3.10
3.56
5.03
6.42
8.36
12.2
16.6
19.8
T
Wall
Thickness
Plain end/
grooved tube
(kg/m)
1.22
1.58
2.44
3.13
3.61
5.10
6.53
8.50
12.5
17.1
20.4
Screwed
and socketed
Weight per meter
TECHNICAL SPECIFICATIONS
• Fully killed steel resistant to strain ageing
• Tight tolerances
• Consistent roundness
• Consistent wall thickness
• Consistent straightness
• Eddy current and Pressure tested (At 70 bar for minimum 5 seconds)
• Working pressure: 25 bar.
• Inside weld bead is removed for grooved pipes (1” and above)
• Where the bead is present the height of the internal bead is ≤1.5mm or 60% max of the nominal wall
thickness, whichever is smaller.
Galvanising is done according to EN 10240.
• B.2 quality: Minimum external coating thickness is 40 microns with an average of 50 micron typical
coating thickness
• B.1 quality: Minimum external coating thickness is 55 microns with an average of 70 micron typical
coating thickness
• Galvanised pipes are passivated after galvanising process. Therefore no white rust form on surface.
CERTIFICATION
All pipes are supplied with Mill Test Certificates according to EN 10204/3.1
AFTER SALES
Our commitment does not end after sales. If we can be of any assistance or should you require any
further technical information then please do not hesitate to contact us.