4. Additional Actions
• Time limit of scanning defined as 2 seconds maximum.
• Rest time for Laser Marking machine and its PC defined to improve effectiveness of process. Also
added in Work Instruction.
Do the marking by running the machine. After marking is done, check that the marking
clearly visible and must be get scanned within 2 seconds. If the QR is not scanned in 2
seconds, clear it and mark it again. Notify your in-charge if it takes more than 2 seconds to
scan repeatedly.
Turn off the machine and its PC for half an hour during lunch/dinner time in each shift.
5. Cut-off details - Ennore
136 Pcs. of Neptune crankshaft sent to AL Ennore after taking above actions.
6. Cut-off details - Pantnagar
216 Pcs. of Neptune crankshaft sent to AL Pantnagar after taking above actions.