Prompterpeoples Proline Stage Pro Single 15 inch Teleprompter

1. The ProLine StagePro 15/17/19 Set-Up Guide
1
Attach monitor arm to StagePro stand with thumbscrew.
Tighten
thumbscrews
to secure mirror.
Tighten down the clamp that attaches the
sled to the StagePro pole.
Attach clamp to stand and secure with screw.
Use thumbscrew to
tighten angle adjustment.
Set to approximately
45 degrees and adjust
as necessary to center
the image in glass.
Note:
Raising the
monitor
higher
on the pole
increases
the image
size and
brightness.
Use the
included
skirt to
hide wires
in the
raised
position.
Connect the monitor
arm to the StagePro
pole.
Slide Glass into Clamp.
Rev: 060908
Note: Make sure the aluminum
plate on the mirror faces the
thumbscrews.
2
3
4
5
6
7