Paper Fish Studios Elisha Legacy Prototype

1
Table of Contents
Elisha Legacy Instruction Booklet

2
Introduction

Where does the game take place?
The game takes place on the planet of Elisha which contains the valuable resource
Pesper Gas. Huge deserts and dune seas cover the currently uninhabited planet.

The Story Thus Far…...
A war named for its victors, the Roxxon War, left the Echo6 galaxy virtually
uninhabitable to the four alien races: the Xera, Terralith, Roxxon, and Terrakith.
Now they can survive only by mining Pesper Gas from the remaining worlds. Each
race vying for more resources has arrived at Elisha. They are racing to occupy and
defend as much land as possible so they can steal the precious Pesper Gas from the
planet. One of the four races involved, the Terralith, discovered a prophecy that
told of a hidden artifact known as the Bihotz. The prophecy states that the Bihotz
has the power to transport its wielders through time. Whether the prophecy is true
or not, the Terralith have decided to send in their own forces in order to investigate
and search for this mysterious artifact in order to reveal the truth of the artifact and
its power. The final battle is at hand. Who will control the fate of all life?


3
Game Components

● 1 miniature for each faction’s leader
● 1 character sheet for each faction
● 20 explorer miniatures for each faction
● 4 rule books
● 1 deck of Event Cards (47 cards total)
● 40 Pesper Gas cut outs in denominations of 1
● 1 box
● 39 map tiles
● 1 round counter chart
● 1 round counter token
● 1 measuring tape
● 1 sand timer to be used when a player chooses a map tile and places it on the
play area
● 5 white circle cut outs to use as movement trackers


4
Factions

A World At War…
The planet Elisha is at war over the valuable resource of Pesper Gas. The war is
being waged between four factions being the Roxxon, the Xera, the Terralith, and
the Terrakith. Each faction has their own power which makes them different from
each other. Using them to your advantage will be key to winning the battle.

Each faction has their own miniature to represent their leader. They also have their
own character sheet that details their “Faction Bonus”.

Faction Bonus
The Roxxon
The Roxxon are a mechanized race with an overwhelming desire for Pesper Gas.
● The Roxxon have the power to move one Explorer 3 spaces during their
turn.

The Xera
The Xera is an aggressive race that is bloodthirsty for combat.
● The Xera have the power to defeat enemy units with only 2 units instead of
3.

The Terralith
The Terralith are an ancient race that has seen many wars and fought many battles.
Their leaders are capable of commanding a massive army.
● The Terralith start the game with 5 explorer units instead of 4.

The Terrakith
The Terrakith are a nomadic group that are more peaceful than aggressive, but can
prove themselves to be very resourceful.
● The Terrakith gain 2 additional Pesper Gas when they initially capture a
Pesper Gas node.


5
Objectives During Gameplay
Capture Resource Nodes
Players must capture resource nodes in order to maintain and build up their
explorer units which in turn can capture more resource nodes or eliminate enemy
explorers or faction leaders.

Protect Resource Nodes
Players must be wary and keep opposing players from defeating their explorer that
controls a Pesper Gas node and stealing their node.

Eliminate Enemy Explorers or Leaders
Players will decide on whether they wish to engage opposing forces in combat. If a
player can plan their moves and predict their enemies’ moves well enough, they
can even eliminate a player from the game by defeating that player’s leader.

6
Game Modes

Economic Mode
In order to attain victory a player must accumulate 250 resources of Pesper Gas
before the 30 round mark. If no player reaches 250 Pesper Gas before the 30
rounds are over, the player with the most resources is declared the winner.

Domination Mode
In this game mode victory is achieved by eliminating every other player from the
game by having their leader defeated, or running out of resources. The remaining
player is declared the winner of the game, and the game ends when there is only
one player’s leader left in the game, and that player has resources. In the event that
there are more than one player’s leader remaining at the end of the 30th round, the
player that has the most explorers on the board at the end of that round is declared
the winner. If two or more players tie, the player with the most resources is
declared the winner of the game.

Legacy Mode
Victory in this mode is achieved by either accumulating 250 Pesper Gas or by
eliminating every other player from the game (by eliminating their leader or them
running out of resources). During the game, if any player collects 250 Pesper Gas
or only one player’s leader remains in the game, that player is declared the winner
of the game. If the game goes to the end of the 30th round, the player with the most
resources is declared the winner. In the event of a tie, the player with the most
explorers is declared the winner of the game.


7
Game Layout

What you need to play the game

1. A play area of 3’6” x 3’6” will be necessary to place map tiles as the game
progresses.
2. Pesper Gas tokens to keep track of your Pesper Gas resources.
3. A round tracker token to keep track of which round the game is currently on.
4. A round counter chart to use the round tracker token with as the rounds
progress.
5. Faction Leader Tokens for each faction to move them accordingly.
6. A sand timer to keep track of the amount of time for map tile placement.
7. Map tiles and a starter tile to expand the play area as the game progresses.
8. Glass counters to represent each faction’s explorers.
9. An Event Card deck to activate the card effects when a round reaches an
even number.
10. 5 movement trackers.
11. Measuring tape

8
Getting Started

Game Tile Placement
The starter tile piece is placed in the middle of the play area. Below is a graphic of
the starter tile. The different labeled sections at the 4 corners dictate where each
faction starts at the beginning of the game.

TK: Terrakith starting area
TL: Terralith starting area
X: Xera starting area
R: Roxxon starting area


9

Getting Started (Cont.)

Preparing for Play
When selecting your play area, keep in mind that you will need enough space for
the board as it evolves due to players placing the map tiles, as well as space for
your faction character sheets, round counter chart, glass counters, Event Card deck,
and miniatures that are not in play yet. The average play area should be around 3
feet and 6 inches by 3 feet and 6 inches. Following these steps can ensure that you
setup your play area correctly:

1. Open up your The Elisha Legacy box and take out all of the components,
which include your 39 Map Tiles (Starter Map Tile included), your Round
Tracker Token your Round Counter Chart, your Event Card deck, your
movement tokens, Pesper Gas Tokens, Character Sheets, and miniatures.
2. Using the included measuring tape, double check your play area to ensure it
meets the minimum required play area of 3’6” x 3’6”.
3. When you are ready to begin play, place the starter map tile in the center of
the play area faceup.
4. Then, take the remaining 38 map tiles and place them faceup inside the top
half of The Elisha Legacy box.
5. Then, take the round counter chart and place it where all the players can see
what round it is, but not in the way of any map tiles.
6. Then, take the Event Card deck (47 cards) and place it next to the round
counter chart, but out of the way of any map tiles.
7. Then move on to selecting which faction each player will play as.
8. All players should then decide what game mode that they wish to play.
9. Finally, each player places their starting explorers and leader in their
faction’s designated space on the starter map tile. The players then shuffle
the Event Card deck and begin play with the Roxxon going first, followed
by the Xera, followed by the Terralith, and ending with the Terrakith turn.

10

Picking Your Faction
All players will pick what faction they want to control. However, if two or more
people want to play as the same faction the dispute is settled through Rock, Paper,
Scissors. The winner gets to pick what faction they want to play as first. It’s
important to take note of the different bonuses that each faction offers and how you
can tailor your play style to make full use of your faction’s bonus. Once all players
have a faction, each player should take a character sheet for their faction.

Placing Your Starting Units and Assigning Values
Once all players have picked a faction, players will place their leader and 4
explorers (5 explorers if you’re playing as the Terralith) in their respective starting
areas so that each explorer is on a hexagon that is touching the hexagon the leader
is on. After all units are properly placed, all players receive 40 Pesper Gas to start
off with. There is a convenient space marked on your character sheet to place your
Pesper Gas tokens on.


11
Below you will find a picture of what the play area should look like if it is setup
correctly:


12
Gameplay

Turn Sequence
1. Draw an Event Card (only every other round)
2. Collect Pesper Gas from nodes that you control
3. Player sacrifices explorers if necessary (refer to “Sacrificing Explorers”)
4. Pay upkeep for current explorers (refer to “Maintaining Your Upkeep”)
5. Build new explorers (refer to “Building New Explorers”)
6. Start 60 second sand timer
7. Pick and place a new terrain map tile within the 60 second sand timer time
limit.
8. Place down up to 5 movement trackers in spaces where your explorers can
move to.
9. Move up to 5 of your controlled explorers or leader to the positions where
the movement trackers were placed.
10.After all the units are moved, remove the movement trackers and place them
back in reach of everyone else where they won’t obstruct any tiles.
11. Engage in combat if the player decides to.
12. Capture a Pesper Gas node if eligible
13. End turn phase

Choosing a Map Tile and Placing it in the Play Area
Before choosing a map tile the player needs to start the sand timer. The player
looks through the map tiles and chooses one; they place the map tile in the play
area where it is eligible to be placed. Roads connect to roads or roads connect to
Pesper Gas nodes on the tiles. If a player cannot choose a map tile and place it
within the time limit they will forfeit their turn. Play will continue with the next
player beginning their respective turn. Below you will find pictures showing
correct tile placement and incorrect tile placement in the play area.

13


14

Maintaining Your Upkeep
All players must spend Pesper Gas units on each of their turns in order to maintain
the number of explorers that they have at the beginning of their turn. Each explorer
you control costs 2 units of Pesper Gas at the beginning of your turn. If a player
does not have enough Pesper Gas to maintain all their explorers, he or she must
decide on which of their explorers to sacrifice and remove from the board until
they have enough Pesper Gas to maintain all their explorers. For each explorer that
is sacrificed, the player in control of that unit receives 5 units of Pesper Gas.

Building New Explorers
After paying the upkeep for the explorers under their control, players can choose to
create new explorers. Each explorer costs 5 units of Pesper Gas to build and
players can build as many as they can afford in a single turn. It’s important to note
that creating large amounts of new explorers will also increase the cost to maintain

15
all explorers for all the following turns. Any new explorers that are created are
placed as close to their respective leader as possible.

Sacrificing  Explorers
In the event that a player has more explorers than they have resources to sustain,
the player must sacrifice some of those explorers in order to pay his upkeep.
Sacrificing an explorer grants the player 5 Pesper Gas. The player chooses which
explorers they want to sacrifice until they have enough Pesper Gas to pay the
upkeep for the remaining amount of explorers they have under their control.
Movement
Players move their explorers and leaders in the same way. Explorers and leaders
can move up to 2 spaces during their turns. Event cards may slow down movement
speed to 1 or prevent a player from moving any units during a single turn. The
Roxxon faction bonus allows them to have 1 unit who can move 3 spaces on their
turn. Explorers and leaders can only move to adjacent hexagonal spaces that are
not blocked by any units (leader or explorers). Explorers and leaders do not have to
move along the black roads.

Combat
In order to eliminate an explorer or leader from play, a player must have at least 3
units on hexagonal spaces adjacent to the explorer or leader they want to remove.
The Xera faction bonus allows them to remove explorers or leaders from play by
touching the targeted unit on 2 sides instead of 3. The attackers don’t all have to be
adjacent to each other so long as they are touching any 3 sides (or 2 in the Xera’s
case) of the targeted unit. Here’s a visual example of how combat works in the
game. Note that “eliminate” means removing the unit from the board. Opposing
players do not take control of that unit.

16

Capturing Pesper Gas Nodes
Pesper Gas nodes are the spaces on map tiles identified by the pink cloud image. It
is necessary for a player to capture and defend a node in order to generate
substantial amounts of Pesper Gas. In order to capture a Pesper Gas node, a
player’s leader or one of their explorer units must land on a node during their turn
and in order to keep receiving Pesper Gas from the node the explorer or leader
must continue to stay on the node.

17
Event Cards

A World of Experiences…
The world of Elisha is always changing and the environment is full of dangerous
oppositions.

Event Cards are the experiences that your faction encounters while searching for
the valuable resource that they so desire. These experiences could be good fortunes
or terrible setbacks.

Below is an example of an Event Card called “Attacked by Sand Demons!”:


18
Event Cards (Cont.)

The Event Card Deck List
All Event Card sheets should be printed twice, but the Event Card Deck will only
include one of each version of “Artifact Fragment” cards. Because of this, after
printing, duplicates of any “Artifact Fragment” card should be discarded. Using
scissors please cut out each Event Card individually. Using tape/glue affix the
cutout to one of the cards included with the game pack received at the start of the
Design Project course. The full Event Card Deck list is below:
x2 A Mountain Slide Occurred! x2 A Sandstorm Has Hit!
x2 Oh No, Sand Giants! x2 Attacked by Sand Demons!
x2 Pesper Mirage x2 Sandy Rations
x2 Heavy Feet x2 Pesper Gas Pocket
x2 Roxxon’s Swiftness x2 Jepbojob Season
x2 MicroManagement x2 Tactical Advancements
x2 Mining Accident! x2 Dense Fog
x2 Sudden Lightning Storm! x2 Bad Leadership
x2 Sudden Sinkhole! x2 Xera Bloodlust
x2 Spirit of the Terralith x2 Terrakith’s Wisdom
x2 Explorer Mayhem! x2 Heroic Moment!
x1 Artifact Fragment x1 Artifact Fragment
x1 Artifact Fragment


19
Event Cards (Cont.)

The Legendary Artifact
There is also a legendary artifact that has been split into pieces that lies within the
Event Card Deck. These are represented by the “Artifact Fragment” cards. There
are 3 versions of this card, each with a different effect:


20
Credits

Design Paperfish Studios
Mechanics Andrea Hudgins, Brian Murphy, David Rosen, Mario Arrieta Crespo,
and Mathew McLaughlin
Art Andrea Hudgins, Brian Murphy, and Mario Arrieta Crespo
Testing David Rosen, Andrea Hudgins, Brian Murphy, Mario Arrieta Crespo, and
Mathew McLaughlin
Story Brian Murphy
Editing Mario Arrieta Crespo, Andrea Hudgins, Mathew McLaughlin, David
Rosen, Brian Murphy
Producer Andrea Hudgins


21
Prints

You will find the printable components below with detailed instructions on how to
print them and cut them out.

For testing and review purposes, the character sheet pages do NOT need to be
printed out. They are not essential to the gameplay, and during testing and review
they may simply be referenced.

Please print page 24 the Round Counter Tracker then cut out the Round Token
Counter to place on the Round Counter Tracker.

Please print page 25 twice, page 26 three times, page 27 three times, and page 28
once. This will amount to 39 total map tiles. Using scissors each map tile should be
cut out as close to the outermost hexagon as possible. (If you cut off the “extra” bit
of a road this is fine.)


22
Pesper Gas Counters

Using scissors please cut out each individual numbered counter.

23
Movement Trackers

Please cut out each individual circle counter with scissors.


24
Round Counter Tracker


25
Map Tiles


26
Map Tiles (Cont.)


27
Map Tiles (Cont.)


28
Starter Map Tile


29
Faction Character Sheets

Using scissors, please cut out each individual character sheet.


30
Faction Character Sheets (Cont...)


31
Event Cards


32
Event Cards (Cont.)


33
Event Cards (Cont.)


Paper Fish Studios Elisha Legacy Prototype

Recomendados

Recomendados

Mais conteúdo relacionado

Semelhante a Paper Fish Studios Elisha Legacy Prototype

Semelhante a Paper Fish Studios Elisha Legacy Prototype (14)

Último

Último (20)

Paper Fish Studios Elisha Legacy Prototype