O slideshow foi denunciado.
Seu SlideShare está sendo baixado. ×

config_mini link

Próximos SlideShares
Mini link tn configuration
Mini link tn configuration
Carregando em…3
×

Confira estes a seguir

1 de 22
1 de 22

Mais Conteúdo rRelacionado

Audiolivros relacionados

Gratuito durante 30 dias do Scribd

Ver tudo

config_mini link

  1. 1. Default IP Address USB Login to MINI-LINK TN control_user / view_user Password: Ericsson
  2. 2. Configure Basic NE Right click>configure>Basic NE As per TND NE Name, Location, Contact, IP address, Subnet Mask and Default GW Current date and Time
  3. 3. Configure OSPF Areas onfigure>DCN>OSPF Areas To View the Static R Right Click>Configure>DCN>
  4. 4. Right click MMU2 D>configure>Configure Radio Link Fill all the parameter as per TND Configure Radio Link (MMU)
  5. 5. Upgrade the Baseline Right click>Tools>Software Upgrade
  6. 6. Select PC>Browse>chose the baseline from list
  7. 7. Apply>Next
  8. 8. Once 100% done upgrade status the activ
  9. 9. Configure Traffic Routing Right Click>Configure>Traffic Routing
  10. 10. Select Interface 1 and Interface 2 as per design slot and send
  11. 11. To Save the TN report Right click>Tools>Report>Save Repo
  12. 12. To Save the Load Configuration Note: FTP server must be ON/Running Right click>Configure>Load Configuration Select Upload to FTP Server and L
  13. 13. View The Inventory and Release Right click>Tools>Inventory
  14. 14. Ethernet Switch Configuration Right Click Ethernet Switch>Configure>General Select Aging time and Switch m
  15. 15. Configure RL-IME Select RL-IME>Right click>Configure>select the pa
  16. 16. Configure WAN Select WAN Interface>Right click>Configure>General Connect to Switch Port
  17. 17. Configure LAN Right Click on LAN>Configure>General Assign the switch port Admin Status Up
  18. 18. Configure VLAN Right Click on Ethernet Switch>Configure>VLAN
  19. 19. Enter the VLAN ID as per Design and Name Add the port member
  20. 20. To View The RSL Right Click on MMU>Radio link alarm and status
  21. 21. To Perform the Loops Go to Radio Links>Slot>Radio Link Loops

×