Pembelajaran

1. KSKV SVM 2018
Last Edited Jan 2018
Course MTA 2033 Document Page 1/ 10
MINISTRY OF EDUCATION, MALAYSIA
VOCATIONAL COLLEGE STANDARD CURRICULUM
COURSE INFORMATION
PROGRAMME : AUTOMOTIVE TECHNOLOGY
COURSE NAME : CHASIS II
CODE NAME : MTA 2033
LEVEL / SEMESTER : 2 SEMESTER 2
CREDIT UNIT : 3.0
CONTACT HOUR : FACE TO FACE : 5.0 HOURS/WEEK
NON FACE TO FACE :
COURSE TYPE : VOCATIONAL
PREREQUISITE : -
CORE REQUISITE : -

2. KSKV SVM 2018
Last Edited Jan 2018
Course MTA 2033 Document Page 2/ 10
COURSE OUTCOMES (COMPETENCY UNIT WORK ACTIVITIES)
The person who is competent in this Course Outcomes shall be able to detect auditory defect, malfunctions of components and
smooth performance and operational electric power steering and assign the required repair job. Upon completion of this
competency unit, students will be able to:
● Setup Scan Tool
● Operate Scan Tool Electric Power Steering Diagnosis
● Replace Electric Power Steering Components
COURSE DESCRIPTION (COMPETENCY UNIT DESCRIPTOR)
Vehicle steering diagnostic is a scope of competency to ensure steering is responsible for providing optimal ride comfort and
handling performance.
The competency includes setup scan tool to perform steering diagnose, operate scan tool electric power steering diagnosis, and
replace electric power steering components in accordance with manufacturer specification.
The outcome of this competency is to detect auditory defect, malfunctions of components and smooth performance and operational
electric power steering and assign the required repair job.

3. KSKV SVM 2018
Last Edited Jan 2018
Course MTA 2033 Document Page 3/ 10
CONTENT AND LEARNING STANDARDS
PROGRAM : AUTOMOTIVE TECHNOLOGY
COURSE NAME : CHASIS II (ELECTRIC POWER STEERING)
CODE NAME : MTA 2033
CONTACT HOURS
(TRAINING
DURATION)
CONTENT STANDARD
(WORK ACTIVITIES)
LEARNING STANDARD (RELATED
KNOWLEDEGE / RELATED SKILLS /
ATTITUDE / SAFETY / ENVIRONMENTAL)
PERFORMANCE CRITERIA /
ASSESSMENT CRITERIA
15 HOURS 1. SETUP SCAN
TOOL
RELATED KNOWLEDGE
1.1 Job control board
1.2 Special tools, scan tools, equipment
and parts
1.3 Ignition system
1.4 Diagnostic socket / connector location
1.5 Type of scan tools connector
1.6 Scan tools operating procedure
ASSESSMENT CRITERIA
1.1 Determine electrical power steering
diagnosis requirements in accordance
with job order.
1.2 Interprete and understanding of job
control board in accordance with
customer requirements.
1.3 Determine of tools, equipment, SST,
scan tools and parts selected and

4. KSKV SVM 2018
Last Edited Jan 2018
Course MTA 2033 Document Page 4/ 10
RELATED SKILLS
1.1 Obtain job order
1.2 Interpret job control board
1.3 Select tools, Special Service Tools
(SST), scan tools, service equipment
and parts
1.4 Switch off ignition system
1.5 Locate diagnostic socket / connector
1.6 Select type of scantools connector
(refer to brand of vehicle)
1.7 Connect scan tools
1.8 Switch on scan tools
1.9 Switch on ignition system
ATTITUDE / SAFETY / ENVIRONMENTAL
Attitude:
Systematic in organising work activities.
Safety:
i. Adhere to safety precaution in
operating scan tool and replacing
electric power steering.
ii. Adhere to company’s safety and
policy.
prepared at work area in accordace
with job order.
1.4 Determine locating of diagnostic
socket / connector visually in
accordance with job requirements.
1.5 Perform selecting and preparing of
type of scan tools connector at work
area in accordance with manufacturer
specification.
1.6 Carry out connecting of scan tools
physically to the hub in accordance
with manufacturer specification.
1.7 Perform switch on and operate the
scan tools in accordance with
manufacturer specification.
1.8 Perform switch on the ignition system
physically.

5. KSKV SVM 2018
Last Edited Jan 2018
Course MTA 2033 Document Page 5/ 10
iii. Use relevant Personal Protective
Equipment (PPE).
iv. Occupational safety & health act 514
1994
Environmental:
i. Practice Reuse, Recycle and Reduce
(3R).
ii. Environmental Quality act 127 1974
CONTACT HOURS
(TRAINING
DURATION)
CONTENT STANDARD
(WORK ACTIVITIES)
LEARNING STANDARD (RELATED
KNOWLEDEGE / RELATED SKILLS /
ATTITUDE / SAFETY / ENVIRONMENTAL)
PERFORMANCE CRITERIA /
ASSESSMENT CRITERIA
16 HOURS 2. OPERATE SCAN
TOOL ELECTRIC
POWER
STEERING
DIAGNOSIS
RELATED KNOWLEDGE
2.1 Fundamentals of power steering
● Functions
● Types of component
2.2 Power steering OEM schematic
diagram
2.3 Type of scan tool system such as:
● On Board Diagnosis (OBD)
● On Board Diagnosis II (OBDII)
● Controller area network bus
(CAN BUS)
2.4 Vehicle brand and model
2.5 Electric power steering diagnosis
operation
2.6 Scan tool printing procedure
ASSESSMENT CRITERIA
2.1 Adhere procedure selecting and
operating of electric power steering
system in scan tools accordance with
manufacturer specification.
2.2 Determin selecting of electric power
steering in scan tools visually
accordance with manufacturer
specification.
2.3 Interprete system data print out with
OEM service manual in reference to
manufacture specification.

6. KSKV SVM 2018
Last Edited Jan 2018
Course MTA 2033 Document Page 6/ 10
RELATED SKILLS
2.1 Select type of scan tool system
2.2 Verify vehicle brand and model
2.3 Select electric power steering mode
in scan tools
2.4 Read vehicle system data in scan
tools
2.5 Print out system data from scan tools
2.6 Interpret system data with service
manual
ATTITUDE / SAFETY / ENVIRONMENTAL
Attitude:
Systematic in organising work activities.
Safety:
i. Adhere to safety precaution in
operating scan tool and replacing
electric power steering.
ii. Adhere to company’s safety and
policy.
iii. Use relevant Personal Protective
Equipment (PPE).
iv. Occupational safety & health act 514
1994
Environmental:

7. KSKV SVM 2018
Last Edited Jan 2018
Course MTA 2033 Document Page 7/ 10
i. Practice Reuse, Recycle and Reduce
(3R).
ii. Environmental Quality act 127 1974
CONTACT HOURS
(TRAINING
DURATION)
CONTENT STANDARD
(WORK ACTIVITIES)
LEARNING STANDARD (RELATED
KNOWLEDEGE / RELATED SKILLS /
ATTITUDE / SAFETY / ENVIRONMENTAL)
PERFORMANCE CRITERIA /
ASSESSMENT CRITERIA
24 HOURS 3. REPLACE
ELECTRIC POWER
STEERING MOTOR
AND CONTROL
MODULE.
RELATED KNOWLEDGE
3.1 Layout of electric power steering
3.2 Fundamentals of electric power
steering components such as:
● Steering motor
● Control module
● Sensors
3.3 Functions electric power steering
3.4 Electric power steering motor and
control module replacing procedure
3.5 Technical report writing :
● Format such as computerised
ASSESSMENT CRITERIA
3.1 Identify and prepare checklist of
malfunctioning of electric power
steering motor and control module
components in accordance with
manufacturer specification.
3.2 Carry out installing of new electric
power steering components kit in
accordance with manufacturer
specification.
3.3 Compile and submit diagnostic and
replace report according to the
service and repair manual

8. KSKV SVM 2018
Last Edited Jan 2018
Course MTA 2033 Document Page 8/ 10
or manual
● Content / information
● Submission procedure
RELATED SKILLS
3.1 Identify malfunctioned electric power
steering motor and control module
components
3.2 Replace electric power steering motor
and control module components
3.3 Prepare diagnostic and replace report
ATTITUDE / SAFETY / ENVIRONMENTAL
Attitude:
Systematic in organising work activities.
Safety:
i. Adhere to safety precaution in
operating scan tool and replacing
electric power steering.
ii. Adhere to company’s safety and
policy.
iii. Use relevant Personal Protective
Equipment (PPE).
iv. Occupational safety & health act 514
1994

9. KSKV SVM 2018
Last Edited Jan 2018
Course MTA 2033 Document Page 9/ 10
Environmental:
i. Practice Reuse, Recycle and Reduce
(3R).
ii. Environmental Quality act 127 1974
Tools, Equipment and Materials (TEM)
ITEMS
1. Vehicle
2. Job order sample
3. Electric power steering components condition sample.
4. Electric power steering diagnose procedure sample.
5. Warranty term & condition sample.
6. Tools, equipment and parts.
7. Consumable material/parts guideline and references.
8. Workplace setup requirement.
9. Tools setup and arrangement procedure.
10. Safety and security protecting materials.
11. Manufacturer SOP sample.

10. KSKV SVM 2018
Last Edited Jan 2018
Course MTA 2033 Document Page 10/ 10
REFERENCES
1. BOSCH, Automotive Terminology, Published by SAE in 1998, ISBN 0-7680-0338-5.
2. Jose Luis Leyva, Learn Automotive Terminology in 2015, ISBN 9-781503-225725.
3. BOSCH, Automotive Handbook, Published by Bosch in 1996, ISBN 1-56091-918-3.
4. Lenz, Cozzarini, Emissions and Air Quality, Published by SAE in 1999, ISBN 0-7680-0248-6.
5. Owen Coley, Automotive Fuels Reference Book, Published by SAE in 1995, ISBN 1-56091-589-7.
6. Eric Chowanietz, Automobile Electronics, Published by SAE in 1995, ISBN 0-7506-1878-7.
7. Tom Denton, Automotive Electric and Electronic system fourth edition, ISBN 978-0-08-096942-8.
8. Thomas D. Gillespie, Fundamentals of Vehicle Dynamics, Published by SAE in 1999, ISBN 1-56091-199-9.
9. Michael Plint, Anthony Martyr, Engine Testing Theory and Practice, Published by SAE in 1999, ISBN 0-7680-0314-8
10. Ellis Johnson, Tires and Handling, Published by SAE in 1996, ISBN 1-56091-752-0.
11. Rudolf Limpert, Brake and Design Safety, Published by SAE in 1999, ISBN 1-56091-915-9.

11. KSKV SVM 2018
Last Edited Jan 2018
Course MTA 2033 Document Page 11/ 10
12. BOSCH, Diesel-Engine Management, Published by SAE in 1999, ISBN 0-7680-0509-4.
13. Bernard Challen, Diesel Engine Reference Book 2nd Ed, Published by SAE in 1999, ISBN 0-7680-0403-9.