2. OBJECTIVES:
Identify tools, equipment and
materials for job requirements
Prepare tools, equipment and
materials job requirements
Select appropriate PPE
7. Pencil is an instrument containing lead or
carbon used for marking purposes.
Pull-push rule is a measuring tool made
of flexible steel rolled in a case and used
for taking and laying out dimensions.
8. Steel square is a highly accurate tool made
of flat steel throughout its body used to
check the squareness of the foundation
and other parts of the building.
9. Try square is smaller than the steel
square used to test the square ness of
small pieces of work.
10. Chalk line is used for marking straight line on
a long piece of lumber or wood.
11. Equipment
Proper foot protection -wear footwear of
an appropriate type at the places where
there are falling objects, sharp-edged
tools, nails, abnormally wet surface or
slippery surfaces.
12. Hand protection- Wear suitable gloves
or guantes when employed at places
where the hands may be exposed to
injuries from sharp or rough points,
edges or surface objects.
13. Head Protection- wear a helmet to
avoid head injuries and accidents
such as falling debris.
14. Eye protection-Goggles are the
primary protectors intended to shield
the eyes against liquid or chemical
splash, irritating mists, vapors, and fumes.
15. An electric drill is a drill which is
driven by an electric motor.
A circular saw is a power-saw
using a toothed or abrasive disc or
blade to cut different materials using
a rotary motion spinning around an
arbor.
16. Materials
Lumber is the term applied to wood
after it is milled or sliced into boards,
planks, flitch etc. for commercial
purposes.
17. Nails are a round piece of metal with flat
head on one end and pointed at the
other used to join numbers of the project
together.
18. Plywood a strong board that is made by
gluing together thin sheets of wood. It is
the most important material in fabricating
formworks.
20. ACTIVITY
BUTTONS UP:
Directions: Group the class into 2 by heterogeneous
groupings.
The group will classify the written tools, equipment,
and materials on a thread with buttons.
*There was music to be played and when it stopped
automatically the groups should also be finished.
21. Safety Rules
Formwork used in the
construction industry must be
designed, fabricated, erected,
supported, braced and
maintained so that it can
support all vertical and
horizontal loads that will be
exerted.
