Understanding Discord NSFW Servers A Guide for Responsible Users.pdf
New SKEDCO Products
1. SKEDCO NVG Mount Helmet Cover/Rank Holder/IFF
marking
snag
snag
snag
Problem: Metal NVG mount is unprotected, could snag on
parachute suspension lines during a jump, covers rank insignia,
top strap if snagged on vegetation could yank entire mount and
possibly $7K Night Vision Goggle off helmet! Present SOP using
covering wad of 100 mph tape is sloppy and covers rank/last name
2. SKEDCO NVG Mount Helmet Cover/Rank Holder/IFF
marking
1. Remove strap
2
Solution: (1) Remove helmet NVG strap, (2) use helmet center
front bolt NVG mount it to helmet; problem sharp edges still present
to snag; mount unprotected
3. SKEDCO NVG Mount Helmet Cover/Rank Holder/IFF
marking
Top flap
Bottom flap
3
4
Sew SKEDCO cover to helmet cover (3). Bolt NVG mount to helmet
front over SKEDCO cover (4). Red lines indicate where SKEDCO cover
is sewn to helmet cover. Top flap is kept free to fold down over the
NVG mount onto the side velcro strips.
4. SKEDCO NVG Mount Helmet Cover/Rank Holder/IFF
marking
5. Sew nylon
Velcro to helmet cover
Closed position
shown
6. Sewn-
on rank
Fold down top flap to cover NVG mount.
(5) Rank insignia sewn previously to outside of nylon cover showing,
(6) piece of velcro sewn above SKEDCO cover on helmet cover for
holding flap in open position when out of the way for NVG mounting.
5. SKEDCO NVG Mount Helmet Cover/Rank Holder/IFF
marking 8
7. Open free flap
Glint tape
square
Velcro Velcro
To mount NVGs: (7) open flap up and secure to top velcro piece (8).
Infared “GLINT” tape square now showing for Identification, Friend or
Foe (IFF) by USAF AC-130U “Spectre” gunships
6. 9. Attach NVG flip-
down mount
10. Attach NVG to flip-
down mount
(SKEDCO NVG mount cover not shown for clarity)
7. SKEDCO Cosmo MOUT lifeline emergency rappel
Spine Gate end
1. Rotate til hook
end is up
2. Insert hook end of
snaplink/carabiner
onto Rigger’s belt or
harness nylon
8. SKEDCO Cosmo MOUT lifeline emergency rappel
3. Close gate
4. Rotate towards your belly until
gate is away from body
opening inward and down
5. Insert MOUT lifeline into
the snaplink/carabiner
9. SKEDCO Cosmo MOUT lifeline emergency rappel
6. Wrap MOUT lifeline 4 times
around snaplink/carabiner gate
using standing end connected to
secure fixed anchor point
standing end
running end
7. Close gate
8. Rappel; left gloved hand holds
standing end to guide, right gloved
hand grabs running end of rope and
pulls behind back to break or out to side
to bound...
10. SKEDCO Cosmo MOUT lifeline emergency rappel
6. Wrap MOUT lifeline 4 times
around snaplink/carabiner gate
using standing end connected to
secure fixed anchor point
standing end
running end
7. Close gate
8. Rappel; left gloved hand holds
standing end to guide, right gloved
hand grabs running end of rope and
pulls behind back to break or out to side
to bound...