3 com desktop_communicator-v2_6_2-release_notes-1v11
1. 3Com Desktop Communicator V2.6.2 Release Notes
Keywords: desktop communicator, communicator, softphone, voip
Abstract: This release notes describes the 3Com Desktop Communicator release with respect to hardware
and software compatibility, released features and functions, software upgrading, and documentation.
Acronyms:
Acronym Full spelling
VoIP Voice over IP
Session Initiation Protocol -the signaling protocol
SIP which the 3Com Desktop Communicator follows for
phone calls
A softphone enables voice over IP telephone calls
Softphone
from any PC workstation and notebook
Computer telephony integration - use contacts
CTI
stored in PC workstation to initiate phone calls
Public Switched Telephone Network - The
PSTN
traditional land-line phone network.
November 11, 2009 Page 1 of 13
2. 3Com Desktop Communicator Release Notes
Table of Contents
Version Information ················································································································· 4
Version Number ················································································································· 4
Version History ·················································································································· 4
Software Operating Environments ·························································································· 4
Hardware and Software Compatibility Matrix ············································································ 5
Restrictions and Cautions ········································································································ 6
Feature List ···························································································································· 8
Software Features ·············································································································· 8
Open Problems and Workarounds··························································································· 10
Related Documentation ········································································································· 13
Software Upgrading ·············································································································· 13
November 11, 2009 Page 2 of 13
3. 3Com Desktop Communicator Release Notes
List of Tables
Table 1 Version history .............................................................................................................................. 4
Table 2 Software operating environments ................................................................................................. 4
Table 3 Hardware and software compatibility matrix ................................................................................. 5
Table 4 3Com Desktop Communicator Basic Edition & Outlook Edition ................................................... 8
November 11, 2009 Page 3 of 13
4. 3Com Desktop Communicator Release Notes
Version Information
Version Number
3Com Desktop Communicator version 2.6.2 & 3Com Desktop Communicator Outlook Edition version
2.6.2
Version History
Table 1 Version history
Version number Last version Release Date Remarks
3Com Desktop
Communicator 2.6.2
3Com Desktop - November 6, 2009 -
Communicator
Outlook Edition 2.6.2
Software Operating Environments
Table 2 Software operating environments
Hardware
Operating system Database Browser
requirements
3Com VCX IP
Telephony System –
version 9.0 and higher
PC workstation or
notebook with Intel
Windows XP SP2/SP3 Premium 4 or
Windows Vista Home compatible processor
Basic, Home Memory 1 GB
Premium, Business,
Enterprise, Ultimate Hard disk 100 MB free
SP1 space
Microsoft Outlook Audio card
2003/2007 (optional)
USB interface for
using handsets or
headsets (optional)
Video camera
(optional)
November 11, 2009 Page 4 of 13
5. 3Com Desktop Communicator Release Notes
Hardware and Software Compatibility Matrix
Table 3 Hardware and software compatibility matrix
Item Specifications
Microsoft Outlook, Microsoft Live Messenger (3Com Desktop
Product family
Communicator Outlook Edition only)
Software platform VCX 9.0 and higher
Minimum memory requirements 1 GB
November 11, 2009 Page 5 of 13
6. 3Com Desktop Communicator Release Notes
Restrictions and Cautions
Installation
If you are using an older version than 2.6.2 of the 3Com Desktop Communicator, please uninstall (see
chapter “Uninstallation” in the 3Com Desktop Communicator User Guide) the older version before you
install the new version.
Upgrading to Outlook Edition
If you are using a non-Outlook edition of the 3Com Desktop Communicator, you do NOT need to
uninstall the client before upgrading to the 3Com Desktop Communicator Outlook Edition. You
simply need to do the following:
i) The VCX Phone profile needs to be updated to accept softphone Outlook edition registrations.
ii) 3Com Desktop Communicator Outlook Edition Upgrade Licenses must be installed on the VCX.
iii) a) Go offline then online from the 3Com Desktop Communicator presence options to force the re-
registration of the client with the VCX server.
or
iii) b) Shutdown the 3Com Desktop Communicator client and restart the application.
This will cause the client to now function as the Outlook Edition.
Special dial rules for North America
Rule 1: If phone number is >6 and no leading “+” and Country Code in Regional Specific Settings is 1
(US) and number starts with 011, the 3Com DC Communicator will dial Outbound Line as entered in
the Regional Specific Settings followed by the number as entered by the user.
Rule 2: If phone number is >6 and no leading “+” and Country Code in Regional Specific Settings is 1
(US) and number does not start with 011, the 3Com DC Communicator will dial Outbound Line as
entered in the Regional Specific Settings followed by the Long Distance Prefix as entered in the
Regional Specific Settings and the number as entered by the user.
Rule 3: If phone number >6 and no leading “+” and Country Code in Regional Specific Settings is 1
(US) and number starts with “(“, the 3Com Desktop Communicator will dial Outbound Line as entered
in the Regional Specific Settings followed the Long Distance Prefix as entered in the Regional
Specific Settings and the number as entered by the user.
Rule 4: If Country Code in the settings is 1 (US) and the number >10 digits, the 3Com Desktop
Communicator will add the Outbound line followed by the International prefix and the number as
entered by the user.
November 11, 2009 Page 6 of 13
7. 3Com Desktop Communicator Release Notes
Rule 5: If Country Code in the settings is 1 (US) and the number =10 digits, the 3Com Desktop
Communicator will add the Outbound line followed by the Long Distance prefix and the number as
entered by the user.
Dialing Samples for North America
Required Settings for North America:
DC Regional Specific Settings:-
Country code 1
Area code 99999
Outbound line 9
Long distance prefix 1
International prefix 011
Samples:
Dialed Number Translated Number
+15083231111 9 1 508 323 1111
5083231111 9 1 508 323 1111
(508)3231111 9 1 508 323 1111
15083231111 9 1 508 323 1111
915083231111 9 1 508 323 1111
41 44 123 4567 9 011 41 44 123 4567
+41 44 123 4567 9 011 41 44 123 4567
31111 31111
Additional dial rule information
1. If “( )” are used, there is a leading “+” followed by the Country Code needed.
2. If local dialing is always long distance formatted, then “99999” need to be entered as Area Code in
the Regional Specific Settings (NOT empty or other number!).
Dialing in ITU format
Numbers will be formatted in ITU standard (+<Country Code><Area Code><Number>) according to
the values entered within the Regional Specific Settings of the 3Com Desktop Communicator when
using a “+” in front of the phone number.
If number starts with “+”, the 3Com Desktop Communicator will dial Outbound Line , International
Prefix or Long Distance Prefix entered in the Regional Specific Settings (when user has not already
entered them manually) followed by the number. Therefore it is important to secure correct Regional
Specific Settings entries and to save phone numbers in the correct ITU format.
With a leading 0 in Area and/or Country codes within the Regional Specific Settings, calls will fail
when ITU format (leading “+”) is used. Therefore always enter Area and Country codes within the
Regional Specific Settings without a leading “0”.
November 11, 2009 Page 7 of 13
8. 3Com Desktop Communicator Release Notes
Feature List
Software Features
Table 4 3Com Desktop Communicator Basic Edition & Outlook Edition
Category Features
• Attended/Unattended Call Transfer
• Audio & Video Call and Conferencing (Mixing
on the Client) up to 6/4 participants
• Automatic Web Directory Lookup with
Individual Online Directory Selection
• Call Hold
• Call Log History in Microsoft Outlook (3Com
Desktop Communicator Outlook Edition only)
• Call Timer
• Caller ID (SIP ID)
• Click-to-Call in Microsoft Outlook (3Com
Desktop Communicator Outlook Edition only)
• CTI for Hardphones
• Customizable Ring Tones
• Do not Disturb
• DTMF Support via RFC 2833
Telephony & Video Features • Hook Support
• Import Microsoft Outlook/Exchange Contacts
(3Com Desktop Communicator Outlook Edition
only)
• Inbound Call "Busy"
• Microphone & Speaker Device Selector
• Microsoft Outlook 2003/2007 Integration
(3Com Desktop Communicator Outlook Edition
only)
• Mute
• MWI (Voice Mail Message Waiting Indication)
and One Click Access to Voice Mail Box
• Record Call on Demand (3Com Desktop
Communicator Outlook Edition only)
• Redial Button
• Reject 2nd Call
• Short Dial List
• Soft Keys for Feature Invocation via Feature
November 11, 2009 Page 8 of 13
9. 3Com Desktop Communicator Release Notes
Category Features
Codes
• Take Notes during Call, stored in Microsoft
Outlook Journal(3Com Desktop Communicator
Outlook Edition only)
• Telephony Line Status
• Automatic Gain Control (AGC)
• Audio Codecs: G.711u, G.711a, G.729a,
Audio & Video Specifications Speex, iLBC, GSM
• Video Codecs: H.263, H.264, MPEG4V3
• QoS Support (diffserv, 802.1p)
• Buddy List
• Chat Log/History within Outlook (3Com
Desktop Communicator Outlook Edition only)
• Emoticons Support
Instant Messaging Features
• IM Chat (T.140 Chatting) Functions and
Presence Status (from IM, SIP Presence & SIP
Dialog)
• Live Messenger Integration (3Com Desktop
Communicator Outlook Edition only)
• Auto Detect IP Address
Network Features
• STUN/NAT, UDP and VPN Support
• English
Language Support
• Chinese (Simplified)
November 11, 2009 Page 9 of 13
10. 3Com Desktop Communicator Release Notes
Open Problems and Workarounds
Problem 1 SIP Presence in a Region-Branch multi-site configuration
First found-in version: Beta
Description: SIP Presence does not work in a Region-Branch multi-site configuration.
Workaround: -
Problem 2 Usage in non-IP based environment
First found-in version: Beta
Description: If the 3Com Desktop Communicator is connected over a non-IP based connection
(e.g. TDM-Media Gateway connection through the PSTN), video calls, video conferencing and
transmission of the static picture will not work.
Workaround: -
Problem 3 Silent Monitor
First found-in version: Beta
Description: Feature function Silent Monitor does not work when monitoring a 3Com Desktop
Communicator user.
Workaround: -
Problem 4 Barge in
First found-in version: Beta
Description: Feature function Barge in does not work.
Workaround: -
Problem 5 Feature indicators
First found-in version: Beta
Description: Features with on and off buttons will not indicate if they are on or off (see e.g. Cap
on and Anonymous Now features).
Workaround: -
Problem 6 Uninstall with Windows XP
First found-in version: Beta
Description: It is possible that not all 3Com Desktop Communication related files will be
uninstalled when 3Com Desktop Communicator is running during uninstall.
Workaround: Terminate 3Com Desktop Communicator before uninstallation by right click on the
3Com Desktop Communicator icon in the taskbar and select “Quit”.
Problem 7 CTI function
First found-in version: Beta
Description: IP address usage in CTI function (see General Settings of the 3Com Desktop
Communicator) is not supported by the VCX. Therefore User name and Password is not
supported either and must be left empty.
November 11, 2009 Page 10 of 13
11. 3Com Desktop Communicator Release Notes
Workaround: Enter the full phone number (e.g. from your 3Com phone or your mobile phone) as
CTI address and leave User name and Password empty.
Problem 8 CTI Number
First found-in version: Beta
Description: 3Com Desktop Communicator is not working by entering a phone number with
leading “+” in the CTI Settings
Workaround: CTI number in the Settings need to be entered without leading “+” and no dial rule
will apply (what is entered will be dialed). Example: 9 1 508 323 1111 (and NOT +1 508 323
1111).
Problem 9 Link in pop-up window when login fails
First found-in version: Beta
Description: If the 3Com Desktop Communicator is not able to login to the VCX, a pop-up window
appears with an error message and the link “Edit your settings”. This link is not activated.
Workaround: Enter Settings through drop-down menu (bottom right corner) to enter/edit your
account settings.
Problem 10 Forward call to voicemail
First found-in version: Beta
Description: If you reject a call, the call will not be forwarded to voicemail automatically.
Workaround: Setup a feature by right click in the Feature Tab and enter VCX codes to enable
and disable call forward to voicemail. To forward all calls to voicemail, enable this feature.
Problem 11 Displayed caller name/number
First found-in version: Beta
Description: If you are receiving a call, the 3Com Desktop Communicator displays the Account
name of the caller if available or only the number of the caller.
Workaround: Always use as Account name your name followed by your phone number.
Problem 12 VCX HG and ACD features
First found-in version: Beta
Description: Not all VCX HGC and ACD features are supported in the 3Com Desktop
Communicator.
Workaround: -
Problem 13 Shortdial loss
First found-in version: Beta
Description: If adding a short dial and terminate the 3Com Desktop Communicator without normal
quit (e.g. by restarting the PC or deleting the 3Com Desktop Communicator process), the short
dial will not be saved.
Workaround: After entering new short dials, quit the 3Com Desktop Communicator normally.
Problem 14 VCX phone profile settings
First found-in version: Beta
November 11, 2009 Page 11 of 13
12. 3Com Desktop Communicator Release Notes
Description: The 3Com Desktop Communicator does not take or use profile information from the
VCX. Example: If Registration Interval in VCX phone profile setting is set to 300s, the 3Com
Desktop Communicator is not set to 300s, too.
Workaround: Enter profile settings from the VCX manually into the 3Com Desktop Communicator.
Problem 15 Video codecs
First found-in version: Beta
Description: If in one 3Com Desktop Communicator video codecs are all set to e.g. H.264 and in
the another 3Com Desktop Communicator all video codecs are set to e.g. H.263p, video won’t
work.
Workaround: Secure that at least one codec in the video settings listing is the same.
Problem 16 Call Forward Universal function
First found-in version: Beta
Description: The 3Com Desktop Communicator can only display that the CFU function is enabled,
but it cannot display which number to forward the call.
Workaround: The forwarding number need to be manually configured within the 3Com Desktop
Communicator.
Problem 17 Change name of feature code
First found-in version: Beta
Description: If one changes the name of an existing feature code, the code can’t be deleted and
after restarting the 3Com Desktop Communicator, this feature code will appear twice.
Workaround: To change the name of a feature code, enter and save a new feature code with the
new name and delete the old feature code afterwards.
November 11, 2009 Page 12 of 13