This video provides and overview of IDT's VersaClock® 3 and VersaClock LP product families. VersaClock programmable clock generators allow designers to save board space and cost by replacing crystals, oscillators (including programmable oscillators), and buffers with a single timing device. IDT's VersaClock product portfolio contains parts with up to four internal PLLs, each individually programmable, allowing for up to seven unique frequencies. Various subsets of the VersaClock family are targeted for different applications. For high-reliability systems, the VersaClock III family supports glitchless automatic or manual switchover function allows the redundant clock to be selected during normal operation. For consumer systems, VersaClock III and LP (low power) provide flexibility with an internal EEPROM that makes it simple to reprogram frequencies for changing system requirements through the use of the I2C interface. Presented by Baljit Chandhoke, Product Marketing Manager at Integrated Device Technology, Inc. To learn more about IDT's VersaClock programmable clock generators, visit www.idt.com/go/VersaClock.

1. ©2013 Integrated Device Technology, Inc.
IDT VersaClock® 3 and VersaClock LP
Programmable Clocks
IDT 5V49EE5xx, 5V49EE6xx, 5V49EE7xx, 5V49EE8xx,
5V49EE9xx, 5V19EE4xx, 5V19EE9xx
5P49EE5xx, 5P19EE6xx, 5P19EE8xx
Baljit Chandhoke
Product Marketing Manager
Timing Products
Baljit.Chandhoke@idt.com

2. PAGE 2www.IDT.com
Introducing VersaClock®
Highly Configurable Devices
● Up to 4 PLLs, 2 with spread spectrum
● Allows up to 7 unique frequencies to
be generated in a single VersaClock
device
Re-programmable Timing
Devices
● Shorter Design Times
● EEPROM for fluid designs
● I2C for on-board programming
IDT VersaClock Programmable Devices are ideal clocking solution
for a wide range of applications
• VersaClock 3 for consumer, industrial and communications applications
• VersaClock LP for low-powered battery applications
The industry’s most versatile Multi-PLL clock generation and crystal
consolidation solution for consumer, industrial, communications, and
battery-powered applications.

3. PAGE 3www.IDT.com
VersaClock® Simplifies System Timing
● Systems have unique timing requirements
● Short design cycles and procurement windows
● Large BOMs with external crystals / oscillators
● More quartz crystals = lower reliability
● Fully programmable frequencies
● Last minute design changes with simple I2C
● BOM reduced to VersaClock and one crystal
● Fewer quartz crystals = higher reliability
PROBLEM VERSACLOCK SOLUTION
Fixed frequencies, 6 crystals, more $$$, less reliable
upgrade
Adjustable frequencies, 1 crystal, less $, more reliable

4. PAGE 4www.IDT.com
Key Applications and Customer Needs
KEY APPLICATIONS
● High-end consumer
● Industrial
● Communications
● Instrumentation
● Medical
● Battery-powered
APPLICATION ISSUES SOLVED
● Time-critical designs looking to mitigate
crystal procurement risk
● Cost-sensitive or compact applications
with desire to reduce BOM and footprint
● Development need to facilitate margin
testing and system debug
?
?

5. PAGE 5www.IDT.com
IDT VersaClock® 3 Multi-PLL
● VCXO and XO based VersaClock 3 options
● 3.3V core voltage with optional independent 1.8V, 2.5V or 3.3V VDDOs
● Support for 1.8 to 3.3V LVCMOS, LVDS, LVPECL and HCSL
● Supports Spread Spectrum
Inputs:
● 3-50 MHz crystal
● 1 MHz – 200 MHz input clock
Outputs:
● Diff (LVDS, LVPECL, HCSL):
4.9 kHz to 500 MHz
● LVTTL: 4.9 kHz to 200 MHz
Jitter Performance:
● Peak to Peak Period Jitter –
60 psec (typ) – 1 PLL
● Peak to Peak Period Jitter –
120 psec (typ) – 4 PLLs

6. PAGE 6www.IDT.com
IDT VersaClock® 3 Benefits Summary
Benefits Key Feature
Replaces XOs, VCXOs, Clock ICs
Choose what is best fit for system
24 different product offerings (XO, VCXO versions)
Available in 20, 24 and 28 pin QFN package
Reduces board cost
Simplifies board design
Simplifies supply chain management
•4 PLLs, 2 with spread spectrum
•Up to 6 separate configurations in one chip
•LVCMOS ,LVPECL, LVDS and HCSL outputs supported
•3.3 core power supply
•VDDO voltage range 1.8 – 3.3V
Improves time to market
Improves inventory management
Allows for system debug
EEPROM Re-programmable Devices
I2C allows for in-circuit programming
Saves total system cost
Reduces time to market
Spread spectrum clock (SSCG) generation
Programmable drive strength
Target Market Target Application
Wireless Telecom Routers, Switches
Industrial Robotic Equipment, Motor Control
Consumer PC, Gaming, STB & Broadcast Video, DVD
Instrumentation Laser Measurement, Electronic
Measurement
Medical MRI, Ultrasound, CT Scan

7. PAGE 7www.IDT.com
IDT VersaClock® 3 Family – XO Version
Product # Oscillator # of Outputs Split VDDO Output Types Package
5V49EE901 XO 9 - LVCMOS, LVPECL, LVDS, HCSL
32 QFN
28TSSOP
5V49EE902 XO 9 1.8-3.3V LVCMOS, LVPECL, LVDS, HCSL 32 QFN
5V49EE903 XO 9 - LVCMOS
32 QFN
28TSSOP
5V49EE904 XO 9 1.8-3.3V LVCMOS 32 WFN
5V49EE701 XO 7 - LVCMOS, LVPECL, LVDS, HCSL 28 QFN
5V49EE702 XO 7 1.8-3.3V LVCMOS, LVPECL, LVDS, HCSL 28 QFN
5V49EE703 XO 7 - LVCMOS 28 QFN
5V49EE704 XO 7 1.8-3.3V LVCMOS 28 QFN
5V49EE501 XO 5 - LVCMOS, LVPECL, LVDS, HCSL 24 QFN
5V49EE502 XO 5 1.8-3.3V LVCMOS, LVPECL, LVDS, HCSL 24 QFN
5V49EE503 XO 5 - LVCMOS 24 QFN
5V49EE504 XO 5 1.8-3.3V LVCMOS 24 QFN

8. PAGE 8www.IDT.com
IDT VersaClock® 3 Family – VCXO Version
Product # Oscillator # of Outputs VDDO Output Types Package
5V19EE901 VCXO 9 3.3V
LVCMOS, LVDS, LVPECL,
HCSL
32 QFN
28 TSSOP
5V19EE902 VCXO 9 1.8-3.3V
LVCMOS, LVDS, LVPECL,
HCSL
32 QFN
5V19EE903 VCXO 9 3.3V LVCMOS
32 QFN
28 TSSOP
5V19EE904 VCXO 9 1.8-3.3V LVCMOS 32 QFN
5V19EE403 VCXO 4 3.3V LVCMOS 24 QFN
5V19EE404 VCXO 4 1.8-3.3V LVCMOS 24 QFN

9. PAGE 9www.IDT.com
IDT VersaClock® LP Conserves Power
● 1.8V core provides supply current of 8mA (typ)
● Up to 8 outputs
● 32kHz oscillator for Bluetooth and CPU (power-down mode)
● Spread Spectrum technique tailored to eliminate screen artifacts
Inputs:
● TCXO/Signal: 10 MHz to 40 MHz
● Crystal: 8 MHz to 30 MHz
● RTC Crystal: 32.768 kHz
Outputs:
● SE Outputs: Up to 120MHz
● Differential Outputs up to 150MHz
Jitter Performance :
● Peak to Peak Period Jitter
<100 ps Max ( Single Output Freq)
● Peak to Peak Period Jitter
<200 ps Max (Multiple Output Freqs)

10. PAGE 10www.IDT.com
IDT VersaClock® LP Benefits Summary
Benefits Key Features
Improves time to market
Shortens design time
Allows for in-system debug
• EEPROM Re-programmable Devices
• I2C allows for in-circuit programming
● Saves BOM cost and board space
● Reliable startup and operation
● Improves inventory management
• LVCMOS , LVDS outputs supported
• Available in 20, 24 and 28 pin QFN pkgs
• 4 PLLs, 2 with spread spectrum
• Up to 6 separate configurations in one chip
● Low power consumption when fully operational
• 1.8V core power supply
• VDDO Voltage range 1.8 – 3.3V
• Power-down mode saves power
32kHz oscillator for Bluetooth and CPU
(power-down mode)
Target Market Target Application
Industrial Ultrasound, Radios, docking stations, in-
car entertainment, POS
Consumer Netbook, camera, mobile handset,
portable navigation devices
Instrumentation Laser Measurement, Electronic
Measurement
General Battery-powered systems

11. PAGE 11www.IDT.com
IDT VersaClock® LP Family
Product #
# of
Outputs
Core
Voltage
VDDO
32kHz
Support
Output Type Package
5P49EE801 8
1.8V 1.8-3.3V
Yes
LVTTL
LVDS (1 pair)
28 QFN
5P49EE802 8 Yes LVTTL 28 QFN
5P49EE601 6 Yes
LVTTL
LVDS (1 pair)
24 QFN
5P49EE602 6 Yes LVTTL 24 QFN
5P49EE502 5 No LVTTL 20 QFN

12. PAGE 12www.IDT.com
Summary
● IDT VersaClock® Programmable Devices are ideal clocking solution
for a wide range of applications
● Replaces XOs, VCXOs, Clock ICs
● Improves time to market
● Shortens design time
● Allows for in-system programming
● Saves BOM cost and board space
● IDT VersaClock provide industry’s most versatile Multi-PLL clock generation
and crystal consolidation solution for consumer, industrial, communications,
and battery-powered applications.

13. PAGE 13www.IDT.com
Support and More Information
COMPLETE PRODUCT SUPPORT
● VersaClock® Software GUI
● VersaClock Software User Manual
● Evaluation board and User Manual
● Instructional videos
● Datasheets
● Application notes
● Reference designs
● World-class IDT support
www.idt.com/go/VersaClock
www.idt.com/go/sales

14. PAGE 14www.IDT.com
Transcript
● Hello, My name is Baljit Chandhoke and I'm Product Marketing Manager of Timing Products at IDT. Today, I'll be giving you a brief overview of IDT
VersaClock III and VersaClock Low Power Programmable Clock families.
● IDT VersaClock products are programmable devices that save cost, reduce board space and greatly increase flexibility in consumer communications
networking applications. VersaClock devices are highly configurable and can be programmed through the use of I2C interface. These devices are ideal for
designs that need multiple different clock frequencies, quick time to market, low board space and BoM cost. Using IDT's spread spectrum techniques,
VersaClock products are also an inexpensive and effective way to reduce EMI for FCC certification. IDT's VersaClock family contains parts with up to four
internal PLL's, each individually programmable, allowing for up to seven unique frequencies. Various subsets of VersaClock families are targeted for
different applications. For low powered battery application, VersaClock LP has exceptionally low power consumption while maintaining great performance.
VersaClock III will be used in high-end consumer applications, industrial applications and our system clock for communication applications.
● As you see in the block diagram, there are six different crystals. All these crystals can be replaced with a single crystal and VersaClock III from IDT. The
benefits of the solution are reduced board space, reduced bill of material, low cost, as well as capability to change frequencies on the fly. In addition, as
you know, crystals have lower reliability, so when we reduce the number of crystals from six to one, we are increasing the overall reliability.
● Key applications of VersaClock are high-end consumer, industrial, communications, instrumentation, medical and battery-powered devices. As you can
see, there are numerous application issues solved by VersaClock family of products.
● As you see in the block diagram, there are four internal PLL's, each individually programmable, allowing for four unique non-integer related frequencies.
The frequencies are generated from a single clock reference. The reference clock can come from one of the two redundant clock inputs. Automatic or
manual switch over function allows any one of the redundant clocks to be selected during normal operation. The devices are in system, programmable
and can be programmed through the use of I2C interface. An internal double-eprom allows the user to save and restore the configuration of the device
without having to reprogram it on power up.
● As you can see, there are many benefits and features of the VersaClock III family of products which are summarized on this slide.
● We have devices all the way from five outputs to nine outputs with LVCMOS output, LVPECL output, LVDS output and HCSL outputs in different
packages, as shown on this table.
● We also have family of devices with VCXO input, which enables you to program the output frequency depending on the voltage applied at the input.
● Now, I'll talk about the VersaClock Low Power family of devices. VersaClock Low Power devices are programmable clock generators intended for low-
powered, battery-operated consumer applications. There are four internal PLL's, each individually programmable allowing for up to eight different output
frequencies. The frequencies are generated from a single reference clock. The reference clock can come from either a TCXO or a fundamental mode
crystal. An additional 32-kilohertz crystal oscillator is available to provide a real time clock or noncritical performance mega hertz processor clock.
● The key benefits and features of this family are summarized as shown on this slide.
● The different device options that we offer are show on the slide with five outputs all the way up to eight outputs and 20-pin package to 28-pin package.
● In summary, IDT VersaClock Programmable devices are ideal clocking solutions for a wide range of applications. They can be used to replace crystal
oscillators, VCXOs, Clock IC's. They enable our customers to improve time to market, which shorten design times as well as allowing for in-system
programming and system margining. VersaClock family of products save BoM cost and board space.
● IDT provides a complete product support for VersaClock family of products, which include software GUI, user's manual, evaluation board, datasheets,
application notes, instructional videos as well as reference designs. For more information, please go to the link shown on the screen. Thank you for your
time.